Chei de tachelaj

Shackles

Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for long-term or permanent applications or where the load may slide on the pin causing rotation of the pin.

Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used on multi-leg systems.

Range Van Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc.

Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting but merely for fixing purposes.

Design

1

All Van Beest shackles have a specific design for a specific application. Examples are the “Super” shackles which are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space conditions, without loss of functionality or Working Load Limit.

Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles in daily use.

2 3

Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality and safety of use of the shackles:

4

-

5 6

Working Load Limit manufacturer’s identification symbol traceability code steel grade CE conformity code

■ ■ ■ ■ ■

i.e. WLL 25 T i.e. Bs, indicating Van Beest i.e. H pertaining to a particular batch i.e. 4, 6, 8 i.e. CE, Conformité Européen indicating that the product is suitable for lifting purposes.

Van Beest Green Pin® shackles meet all relevant requirements of the Machinery Directive 98/37/EC and all latest amendments.

7 8

Finish

9

Shackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or self coloured, depending on the type of shackle and its application.

Please consult the product section further on for each type of shackle what finish the product has.

10 11 12 13 14 15 16 10

Upon request at time of order, all load rated shackles can be supplied with any of the following documents or certificates: -

works certificate in accordance with EN 10204 - 2.1 or 2.2; certificate of basic raw material in accordance with EN 10204 - 3.1; manufacturer test certificate; EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC;

-

inspection certificate in accordance with EN 10204 - 3.2; proof load test certificate; certificate with the actual breaking load experienced on tested samples; test report of Magnetic Particle Inspection (M.P.I.); test report of Ultrasonic Inspection (U.S.).

Shackles

Certification

The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates, additional costs will be charged.

The test certificates can be supplied surveyed by all official classification societies, such as Lloyd’s, Det Norske Veritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyd’s or any other officially certified inspection body.

Green Pin Standard Shackles and Green Pin Polar Shackles are DNV type approved to certification Note 2.7-1, lifting sets for offshore containers.

Instructions for use

1 2

Shackles should be inspected before use to ensure that: • • • • • • • •

all markings are legible; the body and pin are both identifiable as being of the same size, type and make; the threads of the pin and the body are undamaged; never use a safety bolt type shackle without using the split cotter pin; the body and the pin are not distorted or unduly worn; the body and pin are free from nicks, gouges, cracks and corrosion; shackles may not be heat treated as this may affect their Working Load Limit; never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load Limit.

3 4 5 6

Assembly Ensure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat on the surface of the shackle eye.

7 8

Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes.

Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same size, type and make as it may not be suitable for the loads imposed.

9

Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme circumstances or shock loading be applicable, this must be well taken into account on selecting the correct shackle. Please note that commercial shackles are not to be used for lifting applications.

10

Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline, avoid introduction of bending loads, unstable loads and do not apply overloads.

11 12 13 14 15 16

11

Shackles

Side loads Side loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be avoided, the following reduction factors must be taken into account:

Load angle 0째 45 째 90 째

Reduction for side loading New Working Load Limit 100% of original Working Load Limit 70% of original Working Load Limit 50% of original Working Load Limit

In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in the table are the deviating angles from the in line loads.

When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently in any shackle attached to that leg.

1 2 3 4 5 6

When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assembled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the slings should not exceed 120째.

7

To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by closing the jaws, as this will affect the properties of the shackle.

8 9 10 11 12 13

RIGHT

WRONG

When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased by the value of the hoisting effect.

14 15 16 12

Shackles

Avoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possibly be unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged period or where maximum pin security is required, use a shackle with a safety bolt, nut and split cotter pin.

Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that are

potentially harmful for the shackle. Please be aware that these types of chemicals are used in certain production processes.

Point loading Most of the times the load bearing component that is in connection with a shackle is of a rounded shape. Point loading of shackles is allowed but the minimum diameter of a rounded component should be equal or bigger than the bow size of the shackle being used.

Bigger diameters and or flat parts (at shackle pin side) to increase contact area can be beneficial. Sharp edges should be avoided.

2 3

Temperature

4

If extreme temperature situations are applicable, the following load reduction must be taken into account:

Temperature up to 200째C 200 - 300째C 300 - 400째C > 400째C

1

Reduction for elevated temperatures New Working Load Limit 100% of original Working Load Limit 90% of original Working Load Limit 75% of original Working Load Limit not allowed

5 6

The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionally hazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerous loads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should assess the degree of hazard and the safe working load should be reduced accordingly from the Working Load Limit.

Inspection It is required that the shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.

Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Proofload testing It is required that the shackles are regularly proofload tested and that the testing should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Proofload testing should take place at least every 4 years and more frequently when the shackles are used in severe operating conditions.

7 8 9 10 11 12 13 14 15 16

13

Shackles

Green Pin® Standard Shackles bow shackles with screw collar pin • Material • Safety Factor • Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4161 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

1 2 3 4

5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70

In inch

6

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

8 9 10 11 12 13 14 15 16 14

3

/16 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2

1

/8 /4 3 /8 1 /2 3 /4 1

1

/4 1 /2

1

/4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 2

1

/8 1 /4 3 /8 1 /2 5 /8 1

/4 /16 3 /4 9

width inside

length inside

width bow

length

length bolt

width

d mm

e mm

f mm

g mm

h mm

i mm

j mm

kg

5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

9.5 12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105

22 29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260

16 20 22 26 29 32 43 51 58 68 75 83 92 99 126 138 160 180

41 54 61 71 80 91 114 136 157 176 197 218 240 262 314 358 414 463

31 40 49 56 68 76 93 107 123 141 158 176 192 208 250 281 321 355

28 37 42 49 54 63 79 94 107 124 137 154 170 183 226 250 287 329

0.02 0.05 0.1 0.14 0.19 0.36 0.63 1.01 1.5 2.21 3.16 4.31 5.55 7.43 12.84 18.15 26.29 37.6

weight each

12.5 17 21 23 26 34 40 47 53 60 67 74 80 89 104 111 134 145

5

7

width eye

width eye

width inside

length inside

width bow

length

length bolt

width

d inch

e inch

f inch

g inch

h inch

i inch

j inch

1

1 1 1 1 2 2 2 2 3 3 4 4 5 5

/2 11 /16 13 /16 29 /32 1 /32 11 /32 19 /32 7 /8 3 /32 11 /32 5 /8 29 /32 5 /32 1 /2 1 /8 11 /32 9 /32 3 /4

3

/16 9 /32 11 /32 3 /8 7 /16 17 /32 5 /8 3 /4 7 /8 1 1 1 1 1 1 1 2 2

1

/8 /32 3 /8 17 /32 25 /32 31 /32 1 /4 9 /16 9

3

1 1 1 1 1 2 2 2 2 3 3 4

/8 1 /2 17 /32 11 /16 3 /4 7 /8 3 /32 1 /4 7 /16 23 /32 7 /8 1

/4 /32 29 /32 9 /32 3 /4 1 /8 11

7

1 1 1 1 2 2 3 3 3 4 4 5 5 7 7 8 10

/8 5 /32 9 /32 7 /16 23 /32 17

/32

9

/32 /4 1 /4 17 /32 1 /4 3 /4 3

3

/4 /4 1 /4 3

5

/8 25 /32 7 /8 1 1 1 1 2 2 2 2 3 3 3 4 5 6 7

5

/32 /32 23 /32 9

9

/32 /16 15 /16 9 /32 5 /8 29 /32 15 /16 7 /16 9 /32 3 /32 11

1 2 2 2 3 3 4 5 6 6 7 8 9 10 12 14 16 18

5

/8 1 /8 3 /8 25 /32 5 /32 19 /32 1 /2 11 /32 5 /32 29 /32 3 /4 9 /16 7 /16 5 /16 11 /32 3 /32 5 /16 1 /4

1 1 1 2 2 3 3 4 4 5 6 6 7 8 9 11 12 14

1

/4 9 /16 15 /16 3 /16 11 /16 11

/16 /16 13 /16 9 /16 3 /16 29 /32 9 /16 3 /16 13 /16 3 /32 5 /8 3

1 1 1 1 2 2 3 3 4 4 5 6 6 7 8 9 11 12

1

/8 1 /2 11 /16 15 /16 1 /8 1 /2 1 /8 23 /32 3 /16 7 /8 3 /8 1 /32 11 /16 3 /16 29 /32 13 /16 5 /16 15 /16

weight each

lbs 0.05 0.11 0.22 0.3 0.42 0.79 1.38 2.22 3.31 4.86 6.97 9.49 12.24 16.37 28.31 40.01 57.96 82.89

bow shackles with safety bolt • Material • Safety Factor • Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

Shackles

Green Pin® Standard Shackles

G-4163 working diameter diameter diameter width width load bow pin eye eye inside limit a b c d e tons mm mm mm mm mm 0.5 7 8 17 7 12 0.75 9 10 21 9 13.5 1 10 11 23 10 17 1.5 11 13 26 11 19 2 13.5 16 34 13.5 22 3.25 16 19 40 16 27 4.75 19 22 47 19 31 6.5 22 25 53 22 36 8.5 25 28 60 25 43 9.5 28 32 67 28 47 12 32 35 74 32 51 13.5 35 38 80 35 57 17 38 42 89 38 60 25 45 50 104 45 74 35 50 57 111 50 83 42.5 57 65 134 57 95 55 65 70 145 65 105 85 75 83 163 75 127

length inside f mm 29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260 329

width bow

length

length bolt

g mm 20 22 26 29 32 43 51 58 68 75 83 92 99 126 138 160 180 190

h mm 54 61 71 80 91 114 136 157 176 197 218 240 262 314 358 414 463 556

i mm 43 51 61 68 83 99 115 131 151 167 179 198 202 244 270 302 330 376

width thickness weight nut each j mm 37 42 49 54 63 79 94 107 124 137 154 170 183 226 250 287 329 355

k mm 4 5 8 11 13 17 20 23 25 28 31 34 19 24 27 30 33 40

kg 0.06 0.11 0.16 0.22 0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

2 3 4 5

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 11 9 0.5 /4 /16 /16 /32 5 3 13 11 0.75 /16 /8 /16 /32 3 7 29 3 1 /8 /16 /32 /8 7 1 7 1.5 /16 /2 1 1/32 /16 1 5 17 /2 /8 1 11/32 /32 2 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 8.5 1 1 1/8 2 11/32 1 9.5 1 1/8 1 1/4 2 5/8 1 1/8 12 1 1/4 1 3/8 2 29/32 1 9/32 13.5 1 3/8 1 1/2 3 5/32 1 3/8 17 1 1/2 1 5/8 3 1/2 1 17/32 25 1 3/4 2 4 1/8 1 25/32 35 2 2 1/4 4 11/32 2 31/32 42.5 2 1/4 2 9/16 5 9/32 2 1/4 55 2 1/2 2 3/4 5 3/4 2 9/16 85 3 3 1/4 6 7/16 2 15/16

1

width inside e inch 1 /2 17 /32 11 /16 3 /4 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8 5

length inside

width bow

length

length bolt

width thickness weight nut each

f inch 1 5/32 1 9/32 1 7/16 1 23/32 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 8 3/4 10 1/4 12 15/16

g inch 25 /32 7 /8 1 1 5/32 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 6 9/32 7 3/32 7 1/2

h inch 2 1/8 2 3/8 2 25/32 3 5/32 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/32 16 5/16 18 1/4 21 29/32

i inch 1 23/32 2 2 3/8 2 11/16 3 9/32 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 7 15/16 9 19/32 10 5/8 11 7/8 13 14 25/32

j inch 1 1/2 1 11/16 1 15/16 2 1/8 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 9 13/16 11 5/16 12 15/16 14

k inch lbs 5 /32 0.13 3 /16 0.25 5 /16 0.34 7 /16 0.48 17 /32 0.92 11 /16 1.62 25 /32 2.59 29 /32 3.9 1 5.69 1 1/8 8.06 1 1/4 10.81 1 11/32 14.42 3 /4 18.06 1 5/16 31.34 1 3/32 43.77 1 3/16 62.46 1 5/16 87.27 1 19/32 136.69

6 7 8 9 10 11 12 13 14 15 16

15

Shackles

Green Pin® Standard Shackles dee shackles with screw collar pin • Material • Safety Factor • Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A • Finish : hot dipped galvanized • Temperature Range : -20 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4151 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

1 2 3 4 5

diameter diameter diameter bow pin eye a mm 5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70

c mm 12.5 17 21 23 26 34 40 47 53 60 67 74 80 89 104 111 134 145

width eye d mm 5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

width inside e mm 9.5 12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105

length inside

length

length bolt

weight each

f mm 19 22 26 32 37 43 51 59 73 85 90 94 115 127 149 171 190 203

g mm 38 47 56 66 74 85 105 125 144 161 179 199 220 239 283 333 360 399

h mm 31 40 49 56 68 76 93 107 123 141 158 176 192 208 250 281 321 355

kg 0.02 0.05 0.09 0.14 0.19 0.32 0.54 0.87 1.34 2.08 2.77 3.72 5.14 6.85 11.45 16.86 24.61 32.65

In inch

6

working load limit

7

tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

8 9 10 11 12 13 14 15 16 16

diameter diameter diameter bow pin eye a inch 3 /16 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2

b inch 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4

c inch 1 /2 11 /16 13 /16 29 /32 1 1/32 1 11/32 1 19/32 1 7/8 2 3/32 2 11/32 2 5/8 2 29/32 3 5/32 3 1/2 4 1/8 4 11/32 5 9/32 5 3/4

width eye

width inside

length inside

length

lenght bolt

weight each

d inch 3 /16 9 /32 11 /32 3 /8 7 /16 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32 1 25/32 1 31/32 2 1/4 2 9/16

e inch 3 /8 1 /2 17 /32 11 /16 3 /4 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8

f inch 3 /4 7 /8 1 1/32 1 1/4 1 1/2 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5 5 7/8 6 3/4 7 1/2 8

g inch 1 17/32 1 7/8 2 3/16 2 19/32 2 29/32 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8 11 5/32 13 1/8 14 5/32 15 23/32

h inch 1 1/4 1 9/16 1 15/16 2 3/16 2 11/16 3 3 11/16 4 3/16 4 13/16 5 9/16 6 3/16 6 29/32 7 9/16 8 3/16 9 13/16 11 3/32 12 5/8 14

lbs 0.04 0.11 0.2 0.3 0.42 0.7 1.19 1.92 2.95 4.59 6.1 8.2 11.33 15.1 25.23 37.17 54.26 71.98

dee shackles with safety bolt • Material • Safety Factor • Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A • Finish : hot dipped galvanized • Temperature Range : -20 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

Shackles

Green Pin® Standard Shackles

G-4153 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89 25 45 50 104 35 50 57 111 42.5 57 65 134 55 65 70 145 85 75 83 163

width eye d mm 13.5 16 19 22 25 28 32 35 38 45 50 57 65 75

width inside

length inside

length

e mm 22 27 31 36 43 47 51 57 60 74 83 95 105 127

f mm 43 51 59 73 85 90 94 115 127 149 171 190 203 229

g mm 85 105 125 144 161 179 199 220 239 283 333 360 399 455

length thickness weight bolt nut each h mm 83 99 115 131 151 167 179 198 202 244 270 302 330 376

i mm 13 17 20 23 25 28 31 34 19 24 27 30 33 40

kg 0.39 0.67 1.08 1.66 2.46 3.4 4.51 6.1 7.63 13.25 18.53 25.94 35.33 52.97

1 2 3 4 5

In inch

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

1

/2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 3

1

/8 /4 3 /8 1 /2 3 /4 1

1 1

/4 /2

5

/8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 2 3

1

/8 1 /4 3 /8 1 /2 5 /8 1

/4 9 /16 3 /4 1 /4

1 1 1 2 2 2 2 3 3 4 4 5 5 6

width eye

width inside

length inside

length

d inch

e inch

f inch

g inch

11

/32 19 /32 7 /8 3 /32 11 /32 5 /8 29 /32 5 /32 1 /2 1 /8 11 /32 9 /32 3 /4 7 /16

17

/32 5 /8 3 /4 7 /8

1 1 1 1 1 1 1 2 2 2

1

/8 /32 3 /8 17 /32 25 /32 31 /32 1 /4 9 /16 15 /16 9

7

1 1 1 1 1 2 2 2 2 3 3 4 5

/8 3 /32 1 /4 7 /16 23 /32 7 /8 1

/4 11 /32 29 /32 9 /32 3 /4 1 /8

1 2 2 2 3 3 3 4 5 5 6 7 8 9

23

/32

5

/16 /8 11 /32 9 /16 23 /32 17 /32 7

7

/8 /4 1 /2 3

3 4 4 5 6 7 7 8 9 11 13 14 15 17

11

/32 1 /8 29 /32 11 /16 5 /16 1 /32 13 /16 11 /16 3 /8 5 /32 1 /8 5 /32 23 /32 29 /32

length thickness weight bolt nut each h inch 3 3 4 5 5 6 7 7 7 9 10 11 13 14

i inch

9

/32 29 /32 17 /32 5 /32 15 /16 9 /16 1 /32 25 /32 15 /16 19 /32 5 /8 29 /32 25

/32

17

/32 11 /16 25 /32 29 /32 1 1 1 1 1 1 1 1 1

1

/8 /4 11 /32 3 /4 15 /16 3 /32 3 /16 5 /16 19 /32 1

lbs 0.85 1.48 2.39 3.66 5.42 7.5 9.95 13.45 16.82 29.21 40.86 57.19 77.89 116.77

6 7 8 9 10 11 12 13 14 15 16

17

Shackles

Green Pin® Heavy Duty Shackles bow shackles with safety bolt • • • •

Material Safety Factor Finish Certification

• Note

: : : :

bow and pin alloy steel, Grade 8 quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load : +5% forging tolerance on inside width and length

P-6036 working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 120 95 95 215 89 150 105 108 245 100 200 120 130 288 110 250 130 140 308 115 300 140 150 335 120 400 170 175 387 160 500 180 185 410 160 600 200 205 458 185 700 210 215 468 200 800 210 220 478 200 900 220 230 500 210 1000 240 240 530 210 1250 260 270 600 225 1500 280 290 640 225

1 2 3

width inside

length inside

width bow

length

length bolt

width thickness weight nut each

e mm 144 165 175 200 200 225 250 275 300 300 320 340 360 360

f mm 381 400 500 540 600 650 700 700 700 700 700 700 700 700

g mm 238 275 290 305 305 325 350 375 400 400 420 420 450 450

h mm 667 702 854 921 1018 1137 1213 1267 1287 1294 1320 1360 1430 1480

i mm 440 490 520 560 575 690 710 810 850 870 920 940 1020 1060

j mm 416 485 530 565 585 665 710 775 820 820 860 900 970 1010

width inside

length inside

width bow

length

length bolt

width thickness weight nut each

e inch 5 11/16 6 17/32 6 29/32 7 7/8 7 7/8 8 7/8 9 13/16 10 13/16 11 13/16 11 13/16 12 19/32 13 3/8 14 5/32 14 5/32

f inch 15 15 3/4 19 11/16 21 9/32 23 5/8 25 19/32 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2

g inch 9 11/32 10 13/16 11 7/16 12 12 12 25/32 13 25/32 14 3/4 15 3/4 15 3/4 16 9/16 16 9/16 17 23/32 17 23/32

h inch 26 9/32 27 5/8 33 5/8 36 9/32 40 44 3/4 47 3/4 49 7/8 50 11/16 51 52 53 9/16 56 5/16 58 5/16

i inch 17 5/16 19 9/32 20 1/2 22 22 5/8 27 5/32 28 31 7/8 33 1/2 34 1/4 36 1/4 37 40 1/4 41 3/4

j inch 16 3/8 19 1/8 20 7/8 22 1/4 23 26 1/4 28 30 1/2 32 3/8 32 3/8 33 7/8 35 1/2 38 1/4 39 3/4

k mm 50 60 60 65 70 70 70 70 70 70 70 70 70 70

kg 110 160 235 285 340 560 685 880 980 1100 1280 1460 1990 2400

4 5

In inch

6

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 120 3 3/ 4 3 3/ 4 8 1/ 2 3 17/32 150 4 4 1/ 4 9 5/ 8 3 15/16 200 4 3/4 5 1/8 11 11/32 4 5/16 250 4 7/8 5 1/2 12 1/8 4 17/32 5 7/8 13 3/16 4 23/32 300 5 5/16 400 6 1/2 6 7/8 15 1/4 6 5/16 500 6 7/8 7 1/4 16 5/32 6 5/16 600 7 5/8 8 1/16 18 7 9/32 700 8 1/16 8 1/2 18 7/16 7 7/ 8 800 8 1/ 4 8 5/8 18 13/16 7 7/8 900 8 5/ 8 9 1/16 19 11/16 8 9/32 1000 9 1/16 9 7/16 20 7/8 8 9/32 1250 10 1/4 10 5/8 23 5/8 8 7/8 1500 11 11 7/16 25 3/16 8 7/8

7 8 9 10 11 12 13 14 15 16 18

k inch 2 2 3/ 8 2 3/8 2 9/16 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/ 4

lbs 243 353 518 628 750 1235 1510 1940 2161 2425 2822 3219 4387 5291

dee shackles with safety bolt • • • •

Material Safety Factor Finish Certification

• Note

: : : :

bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : +5% forging tolerance on inside width and length

Shackles

Green Pin® Heavy Duty Shackles

G-6038 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 120 95 95 215

width eye

width inside

length inside

length

d mm 89

e mm 144

f mm 267

g mm 530

length thickness weight bolt nut each h mm 440

i mm 50

kg 110

1 2 3 4 5

In inch

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 120

3 3/4

3 3/4

8

15

/32

width eye

width inside

length inside

length

d inch

e inch

f inch

g inch

h inch

i inch

20 7/8

17 5/16

1

3

17

/32

5

11

/16

10

17

/32

length thickness weight bolt nut each

31

/32

6 7

lbs 243

8 9 10 11 12 13 14 15 16 19

Shackles

Green Pin® Sling Shackles bow shackles with safety bolt • • • • •

P-6033

Material Safety Factor Finish Temperature Range Certification

• Note

: : : : :

bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green -20 °C up to +200 °C at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles are supplied with a Lloyd’s Register of Shipping Certificate on proof load, a MPI certificate and US inspection certificate ±5% forging tolerance on inside width and length

working diameter diameter diameter load

body

pin

eye

width

width

length

width

eye

inside

inside

bow

length

length

width

bolt

thickness bearing nut

surface

weight each

limit

1 2 3 4 5

a

b

c

d

e

f

g

h

i

j

k

l

tons

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

40

55

51

109

45

80

200

140

331

252

235

38

97

22

55

60

57

115

55

85

250

160

396

304

270

45

100

50

75

70

70

140

70

105

290

186

467

359

345

54

120

67

125

85

80

155

85

130

365

220

569

428

410

64

150

105

kg

150

94

95

180

89

140

390

250

627

441

455

50

170

160

200

110

105

200

100

150

480

276

744

474

508

50

205

220

250

126

120

228

110

170

540

300

842

528

600

60

240

320

300

135

134

245

122

185

600

350

926

594

620

70

265

350

400

160

160

295

145

220

575

370

964

686

715

80

320

635

500

170

180

330

160

250

680

450

1107

763

810

90

340

803

600

190

200

350

170

275

740

490

1207

828

913

100

370

980

700

200

215

392

190

300

750

540

1257

878

993

100

400

1260

800

218

230

420

200

325

850

554

1395

959

986

110

420

1430

900

242

255

466

220

350

850

584

1454

1040

1050

120

440

1650

1000

260

270

490

240

380

855

614

1497

1116

1176

120

460

2120

1250

285

300

510

260

430

930

650

1620

1193

1275

150

530

2400

1500

295

320

550

280

460

950

680

1710

1278

1350

160

560

3600

width

width

length

width

length

length

width

eye

inside

inside

bow

In inch

working diameter diameter diameter

6

load

body

pin

eye

bolt

thickness bearing nut

surface

weight each

limit

7

a

b

c

d

e

f

g

h

i

j

k

l

inch

inch

inch

inch

inch

inch

inch

inch

inch

inch

inch

inch

40

2 5/32

2

4

9

1

25

3

5

8

7

5

17

13

55

2 3/8

2

1

4

17

2

5

3

3

9

7

6

5

15

5

12

75

2 3/4

2

3

5

17

2

3

4

1

11

3

7

5

18

3

14

125

3 3/8

3

5

6

1

3

11

5

1

14

3

8

11

22

3

16

tons

8 9 10 11 12 13 14 15 16 20

/4 /4 /32

/32 /32 /32 /8

/32 /32 /4 /32

/32 /8 /8 /8

/8 /8 /8 /8

/32 /16 /16 /16

9 /8 /8 /8

15

9

1

1 1/2

3

10

5

1 3/4

4

1

13

5

2 1/8

4

7

16

1

2 1/2

6

/16 /8 /8

/4 /8 /8 /8

150

3 3/4

3

3

7

1

3

17

5

17

15

3

9

7

24

11

17

3

18

2

6

200

4 5/16

4

1

7

7

3

15

5

29

18

7

10

7

29

5

18

11

20

2

8

250

5

4

3

9

4

5

6

23

21

1

11

7

33

1

20

3

23

5

2 3/8

300

5 5/16

5

5

9

5

4

25

7

9

23

5

13

3

36

1

23

3

24

3

400

5

6 /16

6

5

11

5

5

23

8

11

22

5

14

9

38

28

1

500

6 3/4

7

1

13

6

5

9

7

26

3

17

3

43

5

30

31

7

600

7 1/2

7

7

13

25

6

23

10

7

29

1

19

1

47

1

32

5

36

700

7 7/8

8

1

15

7

7

1

11

13

29

1

21

1

49

1

34

5

39

800

8 5/8

9

1

16

9

7

7

12

3

33

1

21

7

55

37

3

38

900

9 9/16

10

18

11

8

11

13

3

33

1

23

1

41

41

1000

10 1/4

10

5

19

9

1250

11 1/4

11

7

20

1500

11 5/8

12

5

21

/4 /8 /4 /16 /16 /8 /8 /2 /8 /8 /8

/8

/8 /8 /8 /8 /32 /16 /16 /32 /32

11

/16

/32 /16 /16 /32 /32 /16 /32 /2 /8 /16

/32 /32 /32 /32 /16 /8 /8 /16 /4 /4

/8 /8 /4 /8 /8 /4 /8 /2 /2 /2

/8 /8 /8 /4 /16 /4 /4 /4 /8

57

/16 /16 /8 /2

/8 /16 /4 /8

27 /8 /2 /2 /4

/8 /8 /4

13

/16

3

/4

3

353

9

1

705

2 3/4

10

1

772

3 1/8

12

5

1400

3 9/16

13

3

1770

4

14

5

2161

4

15

3

2778

7

4 3/8

16

9

3153

3

4 3/4

17

3

3638 4674

/8 /8 /4 /8

/8 /8

/4

485 /2 /2 /8 /8 /8 /4 /16 /8

7

15

33

5

24

1

59

44

46

5

4 3/4

18

1

1

16

15

36

5

25

5

63

3

47

50

1

6

20

7

18

1

37

3

26

3

67

3

50

53

1

6 3/8

22

11

/16 /8

/8

/8 /8

/8

/8 /4

/4 /8

3

/8

148 232

9

/4

48.5 110

10

/16

lbs

/16

/4 /8

/8

/8

5291 7937

bow shackles with safety bolt • • • • •

Material Safety Factor Standard Finish Certification

: bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 5 x WLL : meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B : hot dipped galvanized (175 ton shackle is painted) : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load

Shackles

Green Pin® Super Shackles

G-5263 working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 3.3 13.5 16 34 13.5 5 16 19 40 16 7 19 22 47 19 9.5 22 25 53 22 12.5 25 28 60 25 15 28 32 67 28 18 32 35 74 32 21 35 38 80 35 30 38 42 89 38 40 45 50 104 45 55 57 57 133 50 85 70 70 159 65 120 83 83 171 75 150* 95 95 215 89 175* 105 108 245 100

width inside

length inside

width bow

length

length bolt

e mm 22 27 31 36 43 47 51 57 60 74 83 105 127 144 165

f mm 51 64 76 83 95 108 115 133 146 178 197 260 329 381 400

g mm 32 43 51 58 68 75 83 92 99 126 138 180 190 238 275

h mm 91 114 136 157 176 197 218 240 262 314 365 468 564 667 702

i mm 81 99 115 131 151 167 179 198 203 244 286 342 400 440 490

width thickness weight nut each j mm 63 79 94 107 124 137 154 170 183 226 264 339 371 416 485

k mm 11 17 20 23 25 28 31 34 19 24 27 33 40 50 60

kg 0.44 0.79 1.26 1.88 2.78 3.87 5.26 6.94 8.79 15 22.0 42.0 70.0 112 160

1 2 3

* = round headed bolt

4 5

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 3.3 /2 /8 1 11/32 /32 5 3 5 5 /8 /4 1 19/32 /8 3 7 3 7 /4 /8 1 7/8 /4 7 7 9.5 /8 1 2 3/32 /8 2 11/32 1 12.5 1 1 1/8 15 1 1/8 1 1/4 2 5/8 1 1/8 18 1 1/4 1 3/8 2 29/32 1 9/32 21 1 3/8 1 1/2 3 5/32 1 3/8 30 1 1/2 1 5/8 3 1/2 1 17/32 40 1 3/4 2 4 1/8 1 25/32 55 2 1/4 2 1/4 5 1/4 2 85 2 3/4 2 3/4 6 1/4 2 9/16 120 3 1/4 3 1/4 6 3/4 2 15/16 150* 3 3/4 3 3/4 8 1/2 3 17/32 175* 4 4 1/4 9 5/8 3 15/16

width inside

length inside

width bow

length

length bolt

width thickness weight nut each

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 4 1/8 5 5 11/16 6 17/32

f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 10 1/4 12 15/16 15 15 3/4

g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 7 3/32 7 1/2 9 11/32 10 13/16

h inch 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/8 18 3/8 22 3/16 26 9/32 27 5/8

i inch 3 3/16 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 8 9 19/32 10 19/32 13 15 3/4 17 5/16 19 9/32

j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 10 3/8 13 5/16 14 5/8 16 3/8 19 1/8

k inch lbs 7 /16 0.97 11 /16 1.74 25 /32 2.78 29 /32 4.14 1 6.13 1 1/8 8.53 1 1/4 11.6 1 11/32 15.3 3 /4 19.38 15 /16 33.07 1 3/32 48.50 1 5/16 92.59 1 19/32 154.32 2 246.92 2 3/8 352.74

* = round headed bolt

6 7 8 9 10 11 12 13 14 15 16

21

Shackles

Green Pin® Polar Shackles bow shackles with safety bolt, for use under extreme climatic conditions • Material • Safety Factor • Standard

G-5163

: bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 8 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B • Finish : hot dipped galvanized • Temperature Range : -40 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity • Note : for shackles with WLL 55 and 85 tons the MBL equals 6 x WLL working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38 25 45 50 104 45 35 50 57 111 50 42.5 57 65 134 57 55 65 70 145 65 85 75 83 163 75

1 2 3

width inside

length inside

width bow

length

length bolt

width thickness weight nut each

e mm 22 27 31 36 43 47 51 57 60 74 83 95 105 127

f mm 51 64 76 83 95 108 115 133 146 178 197 222 260 329

g mm 32 43 51 58 68 75 83 92 99 126 138 160 180 190

h mm 91 114 136 157 176 197 218 240 262 314 358 414 463 556

i mm 83 99 115 131 151 167 179 198 203 244 270 302 330 376

width inside

length inside

width bow

length

length bolt

width thickness weight nut each

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8 5

f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 8 3/4 10 1/4 12 15/16

g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 6 9/32 7 3/32 7 1/2

h inch 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/32 16 5/16 18 1/4 21 29/32

i inch 3 9/32 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 8 9 19/32 10 5/8 11 7/8 13 14 25/32

j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 9 13/16 11 5/16 12 15/16 14

j mm 63 79 94 107 124 137 154 170 183 226 250 287 329 355

k mm 13 17 20 23 25 28 31 34 19 24 27 30 33 40

kg 0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

4 5

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 2 11/32 1 8.5 1 1 1 /8 9.5 1 1 /8 1 1 /4 2 5/8 1 1/8 12 1 1 /4 1 3 /8 2 29/32 1 9/32 13.5 1 3 /8 1 1 /2 3 5/32 1 3/8 17 1 1 /2 1 5 /8 3 1/2 1 17/32 25 1 3 /4 2 4 1/8 1 25/32 35 2 2 1 /4 4 11/32 1 11/32 42.5 2 1 /4 2 9/16 5 9/32 2 1/4 55 2 1 /2 2 3 /4 5 3/4 2 9/16 85 3 3 1 /4 6 7/16 3 15/16

6 7 8 9 10 11 12 13 14 15 16 22

k inch 17 /32 11 /16 25 /32 29 /32 1 1 1/8 1 1/4 1 11/32 3 /4 15 /16 1 3/32 1 3/16 1 5/16 1 19/32

lbs 0.92 1.62 2.59 3.9 5.69 8.06 10.81 14.42 18.06 31.34 43.77 62.46 87.27 136.69

bow shackles with safety bolt, for use under extreme climatic conditions • Material • Safety Factor • Finish

P-6031

: bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 5 x WLL : shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) • Temperature Range : -40 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and EC Declaration of Conformity.

All shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load • Note : +5% forging tolerance on inside width and length working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 120 95 95 215 89 150 105 108 245 100 200 120 130 288 110

width inside

length inside

width bow

length

length bolt

e mm 144 165 175

f mm 381 400 500

g mm 238 275 290

h mm 667 702 854

i mm 440 490 520

Shackles

Green Pin® Heavy Duty Polar Shackles

width thickness weight nut each j mm 416 485 530

k mm 50 60 60

kg 110 160 235

1 2 3 4 5

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 120 3 3 /4 3 3 /4 8 1 /2 3 17/32 150 4 4 1 /4 9 5 /8 3 15/16 200 4 3 /4 5 1 /8 11 11/32 4 5/16

width inside

length inside

width bow

length

length bolt

e inch 5 11/16 6 17/32 6 29/32

f inch 15 15 3/4 19 11/16

g inch 9 11/32 10 13/16 11 7/16

h inch 26 9/32 27 5/8 33 5/8

i inch 17 5/16 19 9/32 20 1/2

width thickness weight nut each j inch 16 3/8 19 1/8 20 7/8

k inch 2 2 3/8 2 3/8

lbs 243 353 518

6 7 8 9 10 11 12 13 14 15 16

23

Shackles

Green Pin® Wide Mouth Towing Shackles bow shackles with safety bolt • Material • Finish • Certification

: bow and pin alloy steel, Grade 8, quenched and tempered : hot dipped galvanized : at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : only to be used for towing!

• Note

G-4263 diameter diameter diameter width bow pin eye eye a mm 38 45 50 65 75

b mm 42 50 57 70 83

c mm 89 104 111 145 163

d mm 38 45 50 65 75

width inside

length inside

width bow

length

length bolt

e mm 106 127 146 165 184

f mm 216 248 273 314 330

g mm 159 175 207 213 254

h mm 319 370 411 487 530

i mm 248 296 338 389 432

width inside

length inside

width bow

length

length bolt

e inch 4 3/16 5 5 3/4 6 1/2 7 1/4

f inch 8 1/2 9 3/4 10 3/4 12 3/8 13

g inch 6 9/32 6 7/8 8 5/32 8 3/8 10

h inch 12 9/16 14 9/16 16 3/16 19 3/16 20 7/8

i inch 9 3/4 11 11/16 13 5/16 15 5/16 17

width thickness minimum weight nut breaking each load j k mm mm tons kg 235 19 132 12.5 265 24 180 18 307 27 240 25 343 33 330 48 404 40 600 70

1 2 3 4 5

In inch

6

diameter diameter diameter width bow pin eye eye

7

a inch 1 1/2 1 3/4 2 2 1/2 3

8 9 10 11 12 13 14 15 16 24

b inch 1 5/8 2 2 1/4 2 3/4 3 1/4

c inch 3 1/2 4 1/8 4 11/32 5 3/4 6 7/16

d inch 1 17/32 1 25/32 1 31/32 2 9/16 2 15/16

width thicknessminimum nut breaking load j k inch inch tons 3 9 1/4 /4 132 15 10 7/16 /16 180 12 1/8 1 3/32 240 13 1/2 1 5/16 330 15 7/8 1 19/32 600

weight each

lbs 27.56 39.68 55.12 105.82 154.32

Shackles 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 25

Shackles

Green Pin® Trawling Shackles bow shackles with square headed screw pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

G-4164 working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38 25 45 50 104 45

1

width inside

length inside

width bow

length

length bolt

width

e mm 22 27 31 36 43 47 51 57 60 74

f mm 51 64 76 83 95 108 115 133 146 178

g mm 32 43 51 58 68 75 83 92 99 126

h mm 91 114 136 157 176 197 218 240 262 314

i mm 58 71 82 93 108 120 137 149 164 192

j mm 63 79 94 107 124 137 154 170 183 226

width inside

length inside

width bow

length

length bolt

width

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32

f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7

g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 7/8 5

h inch 3 19/32 4 1/2 5 3/8 6 3/16 6 7/8 7 3/4 8 19/32 9 7/16 10 5/16 12 11/32

i inch 2 9/32 2 25/32 3 1/4 3 11/16 4 1/4 4 3/4 5 3/8 5 7/8 6 1/2 7 9/16

j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 11/16 7 1/4 8 7/8

width bolt head k mm 22 27 32 32 36 41 50 50 60 60

weight each

width bolt head k inch 7 /8 1 3/32 1 9/32 1 9/32 1 7/16 1 5/8 1 31/32 1 31/32 2 11/32 2 11/32

weight each

kg 0.34 0.63 1 1.44 2.21 3.18 4.32 5.67 7.36 12.38

2 3 4 5

In inch

6

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 8.5 1 1 1/8 2 11/32 1 1 1/4 2 5/8 1 1/8 9.5 1 1/8 12 1 1/4 1 3/8 2 29/32 1 9/32 13.5 1 3/8 1 1/2 3 5/32 1 3/8 17 1 1/2 1 5/8 3 1/2 1 17/32 25 1 3/4 2 4 1/8 1 25/32

7 8 9 10 11 12 13 14 15 16 26

lbs 0.75 1.39 2.21 3.17 4.86 7.01 9.52 12.49 16.23 27.29

dee shackles with square headed screw pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

Shackles

Green Pin® Trawling Shackles

G-4154 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89 25 45 50 104

width eye

width inside

length inside

length

length bolt

d mm 13.5 16 19 22 25 28 32 35 38 45

e mm 22 27 31 36 43 47 51 57 60 74

f mm 43 51 59 73 85 90 94 115 127 149

g mm 85 105 125 144 161 179 199 220 239 283

h mm 58 71 82 93 108 120 137 149 164 192

width bolt head i mm 22 27 32 32 36 41 50 50 60 60

weight each

kg 0.32 0.58 0.92 1.33 2.03 2.88 3.96 5.24 6.8 11.22

1 2 3 4 5

In inch

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 1 5 2 /2 /8 1 11/32 5 3 3.25 /8 /4 1 19/32 3 7 4.75 /4 /8 1 7/8 7 6.5 /8 1 2 3/32 8.5 1 1 1/8 2 11/32 1 1/4 2 5/8 9.5 1 1/8 12 1 1/4 1 3/8 2 29/32 13.5 1 3/8 1 1/2 3 5/32 17 1 1/2 1 5/8 3 1/2 25 1 3/4 2 4 1/8

width eye

width inside

length inside

length

length bolt

d inch 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32 1 25/32

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32

f inch 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5 5 7/8

g inch 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8 11 5/32

h inch 2 9/32 2 25/32 3 1/4 3 11/16 4 1/4 4 3/4 5 3/8 5 7/8 6 1/2 7 9/16

width bolt head i inch 7 /8 1 3/32 1 9/32 1 9/32 1 7/16 1 5/8 1 31/32 1 31/32 2 11/32 2 11/32

weight each

6

lbs 0.7 1.28 2.03 2.93 4.48 6.35 8.72 11.56 15 24.74

7 8 9 10 11 12 13 14 15 16

27

Shackles

Green Pin® Sunken Hole Shackles bow shackles with square sunken hole screw pin • • • • •

Material Safety Factor Standard Finish Certification

• Note

: : : : :

bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : key for unscrewing the pin must be ordered separately

G-4169 working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38

1

width inside

length inside

width bow

length

length bolt

width

size hole

weight each

e mm 22 27 31 36 43 47 51 57 60

f mm 51 64 76 83 95 108 115 133 146

g mm 32 43 51 58 68 75 83 92 99

h mm 91 114 136 157 176 197 218 240 262

i mm 51 53 74 85 99 110 122 135 145

j mm 76 93 107 123 141 158 176 192 208

k mm 10 10 10 12 12 16 16 16 16

kg 0.31 0.56 0.98 1.46 2.18 3.06 4.24 5.59 7.37

width inside

length inside

width bow

length

length bolt

width

size hole

weight each

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32

f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4

g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 7/8

h inch 3 19/32 4 1/2 5 3/8 6 3/16 6 7/8 7 3/4 8 19/32 9 7/16 10 5/16

i inch 2 2 3/32 2 29/32 3 11/32 3 29/32 4 5/16 4 13/16 5 5/16 5 3/4

j inch 3 3 11/16 4 1/4 4 7/8 5 9/16 6 1/4 7 7 9/16 8 3/16

k inch 3 /8 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 5 /8 5 /8

lbs 0.68 1.23 2.16 3.22 4.81 6.75 9.35 12.32 16.25

2 3 4 5

In inch

6 7 8 9 P-4170

10 11 12 13 14 15 16 28

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 2 11/32 1 8.5 1 1 1 /8 9.5 1 1/8 1 1/4 2 5/8 1 1/8 12 1 1 /4 1 3 /8 2 29/32 1 9/32 13.5 1 3 /8 1 1 /2 3 5/32 1 3/8 17 1 1 /2 1 5 /8 3 1/2 1 17/32

dee shackles with square sunken hole screw pin • • • • •

Material Safety Factor Standard Finish Certification

• Note

: : : : :

bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : key for unscrewing the pin must be ordered separately

Shackles

Green Pin® Sunken Hole Shackles

G-4159 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89

width eye

width inside

length inside

length

length bolt

size hole

weight each

d mm 13.5 16 19 22 25 28 32 35 38

e mm 22 27 31 36 43 47 51 57 60

f mm 43 51 59 73 85 90 94 115 127

g mm 85 105 125 144 161 179 199 220 239

h mm 51 53 74 85 99 110 122 135 145

i mm 10 10 10 12 12 16 16 16 16

kg 0.34 0.6 0.98 1.26 2.14 3.05 3.56 5.17 6.84

1 2 3 4 5

In inch

P-4170

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 1 5 /2 /8 1 11/32 2 5 3 /8 /4 1 19/32 3.25 3 7 / / 1 7/8 4.75 4 8 7 /8 1 2 3/32 6.5 2 11/32 8.5 1 1 1/8 1 1/4 2 5/8 9.5 1 1/8 1 3 / 1 / 2 29/32 12 1 4 8 1 1/2 3 5/32 13.5 1 3/8 1 5 1 / 1 / 3 /2 17 1 2 8v

width eye

width inside

length inside

length

length bolt

size hole

weight each

6

d inch 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32

e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32

f inch 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5

g inch 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8

h inch 2 2 3/32 2 29/32 3 11/32 3 29/32 4 5/16 4 13/16 5 5/16 5 3/4

i inch 3 /8 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 5 /8 5 /8

lbs 0.75 1.33 2.15 2.77 4.72 6.72 7.84 11.4 15.08

7 8 9 10 11 12 13 14 15 16

29

Shackles

Mooring Shackles bow shackles with screw pin • Material • Finish • Note

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1165 diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

weight each

a mm 32 38 45 50 65

b mm 32 38 45 50 65

c mm 74 89 104 111 145

d mm 64 76 90 100 130

e mm 134 160 189 210 273

f mm 96 114 135 155 195

kg 4.2 7.8 12.5 17.4 35.6

1 2 3 4 5

Crown Shackles dee shackles with round pin, for anchoring applications

6

• • • •

7

Material Finish Pin Note

: : : :

high tensile steel, normalized, Grade 4 self coloured to be fastened by welding non-standard dimensions upon request

8 S-3557

9 10 11 12 13 14 15 16 30

diameter bow

diameter pin

diameter eye

width inside

length inside

weight each

a mm 13.5 16 19 22 28

b mm 16 19 22 25 32

c mm 34 40 47 53 67

d mm 21 27 30 33 42

e mm 49 61 67 73 91

kg 0.3 0.6 0.9 1.3 2.7

Shackles

Crown Shackles dee shackles with round pin, for anchoring applications • • • • •

Material Finish Pin Note Certification

: : : : :

high tensile steel, normalized, Grade 4 self coloured to be fastened by welding non-standard dimensions upon request at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

S-3559 diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 32 42 50 60 65 75 80 90 100 110 130 140 150 160 170 180 190

b mm 35 45 52 68 72 80 90 100 110 125 140 150 160 170 180 190 200

c mm 83 110 134 150 159 172 190 215 245 270 308 335 350 360 390 410 430

d mm 47 60 73 90 100 110 125 140 155 175 200 210 220 235 250 270 280

e mm 111 139 158 211 221 246 276 307 339 385 430 475 525 560 610 650 690

weight each

kg 4 8 13.3 25 32 50 65 94 127 178 269 335 413 500 601 716 839

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 31

Shackles

Shackles generally to DIN 82016 type A bow shackles with screw collar pin • • • • •

S-3461 G-3461

Material Safety Factor Standard Finish Certification

no.

8 10 12 16 20 25

: : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82016 type A hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 8 54 38 45 90 10 60 42 48 96 12 67 47 52 104 16 76 52 60 120 20 85 58 68 136 25 92 63 72 144

width inside

length inside

width bow

weight each

e mm 60 66 73 81 90 100

f mm 152 166 184 210 231 254

g mm 93 102 114 128 140 155

kg 8.44 11 14.5 19.7 29.6 37.4

weight each

1 2 3 4 5

Shackles generally to DIN 82016 type B bow shackles with safety bolt

6

• • • • •

7 8

Material Safety Factor Standard Finish Certification

• Note

9

no.

10

S-3466 G-3466

11 12 13 14 15 16 32

8 10 12 16 20 25 32 40 50 63 80 100

: : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82016 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : with screw collar pin : up to size no. 25 with hand-grip : from size no. 32

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 8 54 38 45 90 10 60 42 48 96 12 67 47 52 104 16 76 52 60 120 20 85 58 68 136 25 92 63 72 144 32 100 70 80 160 40 107 79 90 180 50 120 88 100 200 63 135 96 110 220 80 150 110 125 250 100 165 125 140 280

width inside

length inside

width bow

e mm 60 66 73 81 90 100 110 125 140 155 175 200

f mm 152 166 184 210 231 254 285 315 360 395 447 500

g mm 93 102 114 128 140 155 175 195 220 245 275 305

kg 9.3 12 15.7 21 31.4 39.4 53.3 75.3 105 137 200 300

Shackles

Shackles generally to DIN 82101 type A dee shackles with screw collar pin • • • • •

Material Safety Factor Standard Finish Certification

• Note S-3351 G-3351

no.

0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25

: : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type A hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : shackle no. 0.1 will not have any markings as it is too small

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 0.1 5 4 5 10 0.16 6 5 6 12 0.25 8 7 8 16 0.4 10 8 10 20 0.63 12 10 12 24 1 15 13 16 32 1.6 19 17 20 40 2 21 19 22 44 2.5 23 21 24 48 3.15 26 24 27 54 4 29 27 30 60 5 33 30 36 72 6.3 37 34 39 78 8 41 38 45 90 10 45 42 48 96 12 50 47 52 104 16 55 52 60 120 20 61 58 68 136 25 67 63 72 144

width inside e mm 7 8 11 14 17 21 27 30 33 38 42 47 53 60 66 73 81 90 100

length inside f mm 15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221

weight each

kg 0.017 0.024 0.054 0.097 0.18 0.3 0.57 0.975 1.3 1.85 2.53 4 5.3 7.9 10 13.5 19.2 28 34

1 2 3 4 5

Shackles generally to DIN 82101 type B dee shackles with counter sunk screw pin • • • • •

Material Safety Factor Standard Finish Certification

• Note S-3352 G-3352

no.

0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10

6

: : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : shackle no. 0.1 will not have any markings as it is too small

working thickness thickness diameter diameter width load bow bow pin eye inside limit a b c d e tons mm mm mm mm mm 0.1 5 4 5 10 7 0.16 6 5 6 12 8 0.25 8 7 8 16 11 0.4 10 8 10 20 14 0.63 12 10 12 24 17 1 15 13 16 32 21 1.6 19 17 20 40 27 2 21 19 22 44 30 2.5 23 21 24 48 33 3.15 26 24 27 54 38 4 29 27 30 60 42 5 33 30 36 72 47 6.3 37 34 39 78 53 8 41 38 45 90 60 10 45 42 48 96 66

length inside f mm 15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147

7 8 9

weight each

10

kg 0.014 0.023 0.052 0.093 0.173 0.29 0.543 0.95 1.23 1.8 2.6 3.8 5.2 7.6 9.7

11 12 13 14 15 16 33

Shackles

Shackles generally to DIN 82101 type C dee shackles with safety bolt • • • • •

Material Safety Factor Standard Finish Certification

• Note

no.

S-3356 G-3356

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 34

0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25 32 40 50 63 80 100

: : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type C hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : with screw collar pin : up to size no. 25 with hand-grip : from size no. 32

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 0.4 10 8 10 20 0.63 12 10 12 24 1 15 13 16 32 1.6 19 17 20 40 2 21 19 22 44 2.5 23 21 24 48 3.15 26 24 27 54 4 29 27 30 60 5 33 30 36 72 6.3 37 34 39 78 8 41 38 45 90 10 45 42 48 96 12 50 47 52 104 16 55 52 60 120 20 61 58 68 136 25 67 63 72 144 32 74 70 80 160 40 84 79 90 180 50 93 88 100 200 63 101 96 110 220 80 115 110 125 250 100 130 125 140 280

width inside e mm 14 17 21 27 30 33 38 42 47 53 60 66 73 81 90 100 110 125 140 155 175 200

length inside

weight each

f mm 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221 246 276 307 339 385.5 430

kg 0.113 0.2 0.37 0.686 1.125 1.5 2.15 2.93 4.7 6.33 8.5 10.8 14.4 20.5 29.5 36 49 75 100 140 200 280

Shackles 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 35

Shackles

Yellow Pin Shackles bow shackles with screw collar pin • • • •

Material Standard Finish Note

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

G-3161 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

1 2 3

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

weight each

a mm 5 6 8 10 11 13 16 19 22 25 28 32 35 38 45

b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50

c mm 14 16 19 23 27 30 38 46 53 61 68 76 84 92 106

d mm 9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73

e mm 22 29 31 37 43 48 60 71 84 95 108 119 133 146 177

f mm 15 20 21 26 29 33 43 50 58 68 74 82 92 98 127

kg 0.03 0.05 0.09 0.14 0.17 0.33 0.62 1.07 1.64 2.28 3.36 4.31 6.14 7.81 12.61

4 5

Yellow Pin Shackles bow shackles with safety pin

6 • • • •

7 8

Material Standard Finish Note

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

G-3163

9

working load limit

10

tons 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

11 12 13 14 15 16 36

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

weight each

a mm 13 16 19 22 25 28 32 35 38 45

b mm 16 19 22 25 28 32 35 38 42 50

c mm 30 38 46 53 61 68 76 84 92 106

d mm 20 27 32 36 43 46 51 57 60 73

e mm 48 60 71 84 95 108 119 133 146 177

f mm 33 43 50 58 68 74 82 92 98 127

kg 0.36 0.76 1.23 1.79 2.57 3.75 5.32 7.19 9.44 15.4

Shackles

Yellow Pin Shackles dee shackles with screw collar pin • • • •

Material Standard Finish Note

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

G-3151 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

diameter bow

diameter pin

diameter eye

width inside

length inside

weight each

a mm 5 6 8 10 11 13 16 19 22 25 28 32 35 38 45

b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50

c mm 14 16 19 23 27 30 38 46 53 61 68 76 84 92 106

d mm 9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73

e mm 27 22 26 32 37 41 51 60 71 81 90 100 111 122 146

kg 0.01 0.05 0.08 0.13 0.2 0.27 0.57 1.19 1.43 2.16 3.06 4.11 5.28 7.24 12.14

1 2 3 4 5

Yellow Pin Shackles dee shackles with safety pin

6 • • • •

Material Standard Finish Note

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

7 8

G-3153 working load limit tons 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

diameter bow

diameter pin

diameter eye

width inside

length inside

weight each

a mm 13 16 19 22 25 28 32 35 38 45

b mm 16 19 22 25 28 32 35 38 42 50

c mm 30 38 46 53 61 68 76 84 92 106

d mm 20 27 32 36 43 46 51 57 60 73

e mm 41 51 60 71 81 90 100 111 122 146

kg 0.34 0.67 1.14 1.75 2.52 3.45 4.91 6.24 8.4 14.26

9 10 11 12 13 14 15 16 37

Shackles

Shackles generally to B.S. 3032 table 3 large bow shackles with screw collar pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 3 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

working load limit

diameter bow

diameter pin

diameter eye

inside width

inside length

width bow

weight each

a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 57 60 67 73 79 86 95 108 117

b mm 10 13 16 19 22 25 28 32 35 38 44 48 51 54 57 63 67 73 79 86 92 102 117 127

c mm 19 25 32 38 44 51 57 63 70 76 89 94 102 108 114 127 133 146 159 171 184 203 235 254

d mm 13 16 22 28 35 41 44 51 57 63 70 76 86 92 98 105 111 121 133 146 159 171 197 216

e mm 28 41 54 70 86 98 108 124 137 152 168 187 206 222 238 257 273 302 330 359 387 429 483 533

f mm 19 25 32 41 51 57 64 73 83 89 98 111 121 130 140 152 162 178 197 213 229 254 286 308

kg 0.12 0.18 0.37 0.72 1.20 1.85 2.61 3.78 5.17 6.46 8.34 11.1 14.5 17.8 25.5 34.4 36.8 45 62.2 81.8 95 131 194 274

S-2761 E-2761 G-2761

tons 0.15 0.45 0.75 1.25 2 2.75 3.75 4.75 5.75 7.25 8.5 9.5 11.5 13 15 18.5 20 25 30 35 40 50 65 80

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 38

Shackles

Shackles generally to B.S. 3032 table 4 small bow shackles with screw collar pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 4 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

working load limit

diameter bow

diameter pin

diameter eye

inside width

inside length

width bow

weight each

a mm 6 10 13 16 19 22 25 28 32 35 38 41 44 48 51 54 57 63 70 76 79 89 102 114

b mm 10 13 16 19 22 25 28 32 35 38 44 48 51 54 57 60 63 70 79 86 89 98 114 127

c mm 19 25 32 38 44 51 57 63 70 76 89 95 102 108 114 121 127 140 159 171 178 203 229 254

d mm 13 16 22 28 35 38 44 51 57 60 67 73 79 86 92 95 105 114 127 137 143 159 184 206

e mm 25 38 51 64 76 89 102 114 127 140 152 165 178 191 203 216 229 254 279 305 318 356 406 457

f mm 16 22 29 38 44 51 60 67 76 83 89 98 105 114 121 127 137 152 168 184 191 213 244 273

kg 0.11 0.17 0.35 0.66 1.06 1.68 2.47 3.48 4.79 5.95 7.55 9.79 12.5 15.3 21.8 28.9 30.9 37.8 52.6 69.5 78.1 109 163 235

S-2765 E-2765 G-2765

tons 0.2 0.5 1 1.5 2 3 4 5 6.25 7.5 9.25 10.5 12.5 14.25 16.5 18.5 20 25 30 35 40 50 65 80

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

39

Shackles

Shackles generally to B.S. 3032 table 2 large dee shackles with screw collar pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 2 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

S-2751 E-2751 G-2751 working load limit tons 0.25 0.5 0.75 1.5 2 3 3.75 5 6 7 9.5 11.25 13 14.25 16.25 18 20 25 30 35 40 50 65 80

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 40

diameter bow

diameter pin

diameter eye

inside width

inside length

weight each

a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 54 57 64 70 76 79 89 102 114

b mm 10 13 16 19 22 25 28 32 35 38 45 48 51 54 57 60 64 73 79 86 89 102 114 127

c mm 19 25 32 38 44 51 57 64 70 76 83 89 95 108 114 121 127 146 159 171 178 203 229 254

d mm 13 19 28 32 38 44 51 54 60 67 70 76 83 92 98 105 108 121 133 146 149 171 191 219

e mm 25 38 54 64 73 83 95 105 114 127 137 146 156 178 187 197 210 235 260 279 292 330 375 419

kg 0.11 0.17 0.35 0.66 1.02 1.57 2.3 3.2 4.3 5.4 6.8 8.7 11 14.3 20 26.4 28.3 35 49 63.6 71.7 101 151 215

Shackles

Shackles generally to B.S. 3032 table 1 small dee shackles with screw collar pin • • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 1 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

S-2755 E-2755 G-2755 working load limit tons 0.3 0.6 1 1.75 2.5 3.5 4.5 5.5 7 8 10.75 13 14.75 16.75 19 20 25 30 35 40 50 65 80

diameter bow

diameter pin

diameter eye

a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 54 60 64 70 73 83 92 102

b mm 10 13 16 19 22 25 28 32 35 38 45 48 51 54 57 60 70 73 79 83 95 108 117

c mm 19 25 32 38 44 51 57 64 70 83 89 95 102 108 114 121 140 146 159 165 190 216 235

width inside d mm 9.5 16 22 25 32 35 38 44 48 54 60 64 70 73 76 83 92 98 108 111 127 140 156

length inside

weight each

e mm 22 35 48 57 70 83 92 105 114 127 140 149 162 171 184 197 219 229 254 264 298 333 368

kg 0.1 0.16 0.31 0.59 0.98 1.55 2.2 3.1 4.2 5.1 6.6 8.1 10.5 13.3 19.2 22.4 25.3 31.5 47 60.2 68.5 98 147

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 41

Shackles

Fishing Shackles bow shackles with square head screw pin and one flattened eye • Material • Safety Factor • Finish

: high tensile steel : MBL equals 6 x WLL : painted red

P-3780 h

working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm 2 16 13 16 31 26 4.75 25 19 22 46 34 6.5 29 22 25 53 43

g

c

width inside

length inside

width bow

f mm 21 32 37

g mm 44 65 71

h mm 33 42 51

weight each

kg 0.36 1.06 1.60

f

1

b

a

2 3 e

4

d

5

Fishing Shackles bow shackles with square sunken hole screw pin and one flattened eye

6 • Material • Safety Factor • Finish

7 8

: high tensile steel : MBL equals 6 x WLL : painted red

P-3790 h

9 10

working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm

g

11

2 4.75 6.5

c

12

f b

a

13 14

i

15

e d

16 42

16 25 29

13 19 22

16 22 25

31 46 53

26 34 43

width inside

length inside

width bow

size hole

weight each

f mm

g mm

h mm

i mm

kg

21 32 37

44 65 71

33 42 51

10 12 12

0.30 0.93 1.46

Shackles

Fishing Shackles dee shackles with square head screw pin and one flattened eye • Material • Safety Factor • Finish

: high tensile steel : MBL equals 6 x WLL : painted red

P-3785 working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm

g

2 4.75 6.5

c

16 25 29

13 19 22

16 22 25

31 46 53

26 34 43

width inside

length inside

weight each

f mm

g mm

kg

21 32 37

41 60 71

0.36 1.06 1.60

f

1

b

a

2 3 4

e

d

5

Fishing Shackles dee shackles with square sunken hole screw pin and one flattened eye

6 • Material • Safety Factor • Finish

: high tensile steel : MBL equals 6 x WLL : painted red

7 8

P-3795 working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm 2 16 13 16 31 26 4.75 25 19 22 46 34 6.5 29 22 25 53 43

g

c

width inside

length inside

size hole

weight each

f mm 21 32 37

g mm 41 60 71

h mm 10 12 12

kg 0.30 0.93 1.46

9 10 11

f

12

b

a

13

h

14 15

e d

16 43

Shackles

Fishing Shackles bow shackles with square head screw pin • Material • Safety Factor • Finish

: mild steel : MBL equals 5 x WLL : painted blue

P-3764 working load limit tons 1.5 2.5 3 4 5 6.5 8 9

1

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm 13 16 20 22 25 28 32 36

b mm 16 20 22 25 28 32 36 38

c mm 32 40 48 53 60 67 71 76

d mm 25 32 38 44 51 56 64 70

e mm 48 64 79 87 100 114 126 140

f mm 36 48 60 66 75 86 96 105

weight each

kg 0.37 0.71 1.24 1.68 2.42 3.42 4.85 6.32

2 3 4 5

Fishing Shackles dee shackles with square head screw pin

6 • Material • Safety Factor • Finish

7 8

: mild steel : MBL equals 5 x WLL : painted blue

P-3754

9

working load limit

10

tons 1.5 2.5 3 4 5 6.5 8 9

11 12 13 14 15 16 44

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 13 16 20 22 25 28 32 36

b mm 16 20 22 25 28 32 36 38

c mm 32 40 48 53 60 67 71 76

d mm 25 32 38 44 51 56 64 70

e mm 48 64 75 83 100 104 120 131

weight each

kg 0.36 0.69 1.18 1.61 2.35 3.22 4.63 5.96

Shackles

Fishing Shackles dee shackles with square head screw pin • Material • Finish • Note

: high tensile steel : self coloured : not to be used for lifting applications

S-3770

a

e

b

d

c

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 14 16 20 22

b mm 14 16 20 22

c mm 29 32 38 46

d mm 28 32 36 44

e mm 56 64 60 88

weight each

kg 0.36 0.53 0.84 1.38

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 45

Shackles

Commercial Shackles bow shackles with screw collar pin • Material • Finish • Note

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

S-1161 E-1161

1 2 3 4 5

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65

b mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65

c mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130

d mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130

e mm 20 24 32 40 44 48 56 64 80 88 100 112 128 152 180 200 228 260

f mm 15 18 24 30 33 36 42 48 60 66 75 84 96 114 135 150 171 195

weight per 100 pcs kg 1.54 2.66 6.29 12.3 16.4 21.2 33.7 50.3 98.3 131 192 270 403 674 1120 1536 2276 3375

Commercial Shackles bow shackles with square head screw pin

6 • Material • Finish • Note

7 8

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1164

9 10 11 12 13 14 15 16 46

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm 6 8 10 11 12 14 16 20 22 25 28 32 38

b mm 6 8 10 11 12 14 16 20 22 25 28 32 38

c mm 12 16 20 22 24 28 32 40 44 50 56 64 76

d mm 12 16 20 22 24 28 32 40 44 50 56 64 76

e mm 24 32 40 44 48 56 64 80 88 100 112 128 152

f mm 18 24 30 33 36 42 48 60 66 75 84 96 114

weight per 100 pcs kg 2.7 6.4 12.5 16.6 21.6 34.3 51.2 100 133 195 275 410 686

Shackles

Commercial Shackles bow shackles with counter sunk screw pin • Material • Finish • Note

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

S-1162 E-1162 diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm 8 10 11 12 14 16 20 22 25

b mm 8 10 11 12 14 16 20 22 25

c mm 16 20 22 24 28 32 40 44 50

d mm 16 20 22 24 28 32 40 44 50

e mm 32 40 44 48 56 64 80 88 100

f mm 24 30 33 36 42 48 60 66 75

weight per 100 pcs kg 6 11.6 15.5 20.1 31.9 47.6 93.1 124 182

1 2 3 4 5

Commercial Shackles dee shackles with screw collar pin

6 • Material • Finish • Note

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

7 8

S-1151 E-1151 diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65

b mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65

c mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130

d mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130

e mm 19 25 32 38 44 51 53 64 76 89 100 115 127 152 180 200 220 247

9

weight per 100 pcs

10

kg 1.47 2.56 6.06 11.8 15.8 20.5 32.5 48.5 94.7 126 185 260 388 650 1080 1480 2192 3252

11 12 13 14 15 16 47

Shackles

Commercial Shackles dee shackles with square head screw pin • Material • Finish • Note

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1154

1 2

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 6 8 10 11 12 14 16 20 22 25 28 32 38

b mm 6 8 10 11 12 14 16 20 22 25 28 32 38

c mm 12 16 20 22 24 28 32 40 44 50 56 64 76

d mm 12 16 20 22 24 28 32 40 44 50 56 64 76

e mm 24 32 40 44 48 56 64 80 88 100 112 128 152

weight per 100 pcs kg 2.6 6.17 12.0 16 20.8 33.1 49.4 96.4 128 188 265 395 661

3 4 5

Commercial Shackles dee shackles with counter sunk screw pin

6 • Material • Finish • Note

7 8

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

S-1152 E-1152

9 10 11 12 13 14 15 16 48

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 8 10 11 12 14 16 20 22 25

b mm 8 10 11 12 14 16 20 22 25

c mm 16 20 22 24 28 32 40 44 50

d mm 16 20 22 24 28 32 40 44 50

e mm 32 40 44 48 56 64 80 88 100

weight per 100 pcs kg 5.72 11.2 14.9 19.3 30.7 45.8 89.5 119 175

Shackles

Commercial Shackles danlino V shackles with square head screw pin • Material • Finish • Note

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1170 diameter bow

diameter pin

diameter eye

width inside

length inside

a mm 32

b mm 32

c mm 64

d mm 78

e mm 120

weight per 100 pcs kg 470

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 49