( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
CUTTING & GRINDING WHEELS Safety Information Application pictograms
Wear ear protection
Wear eye protection
Wear a dust mask
Cutting only
Grinding wheel
Wear gloves
Read the instructions
Do not use a damaged wheel
STEEL
INOX STAINLESS
MASONRY
CAST IRON
ALUMINIUM NON-FERROUS
How to use the wheel
Angle grinder (grinding)
Use the correct wheel for the application
Angle grinder (polishing)
Type 41
Portable chop saw (cutting off)
Angle grinder (cutting off)
Type 42
Type 27
Type 28
Circular saw (cutting off)
Type 29
Safety Considerations 1. 2. 3. 4. 5. 6. 7. 8.
Always read the safety instructions and standards before using the machine and wheel. Use the correct wheel for the machine and application. Always visually inspect all wheels prior to mounting for possible damage. Never mount a damaged wheel. Always ensure that the spindle speed of the machine is no higher than the operating speed marked on the wheel. Always wear appropriate safety clothing, gloves, hearing, respiratory and eye protection. Never force a wheel onto a machine spindle. Ensure the bore size of the wheel matched the spindle size of the machine. Ensure correct size & type flanges are used. Never use incorrect, damaged, dirty or burred mounting flanges. Ensure the machine is in optimum condition with the correct safety guard in place.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
INFORMATION
Safety pictograms
CUTTING & GRINDING WHEELS DO’s and DONTs for Cutting-Off & Grinding Wheels
DO always handle and store wheels carefully. Cutting-off wheels should be stacked horizontally and flat, preferably on a steel base plate. Depressed centre wheels should be placed on top of each other or stored in the original packaging. DO always visually inspect all wheels before mounting for possible damage in transit. DO always use a safety guard and ensure that it is correctly positioned and securely fitted. It should cover at least one half of the wheel and protect the operator in the unlikely event of a wheel breakage. NON’REINFORCED CUTTING-OFF WHEELS SHOULD ONLY BE USED ON FIXED MACHINES AND SHOULD BE CORRECTLY GUARDED. DO always switch ‘OFF’ the power at supply source and/or remove the plug from the socket before changing the wheel. DO always use the tools supplied by the machine manufacturer to change the wheel. DO always ensure that the spindle speed of the machine does not exceed the operating speed marked on the wheel. DO always use the correct wheel mounting flanges and ensure that they are undamaged, clean and free from burrs. DO SEE EN 12413. DO allow newly mounted wheels to run at operating speed, with the guard in place, for a reasonable time before cutting or grinding. DO always wear EYE PROTECTION. DO always wear appropriate safety clothing such as DUST MASK, GLOVES, EAR PROTECTION, OVERALLS AND SAFETY SHOES. DO always have machine speeds checked regularly, especially after maintenance or repair. Machines fitted with speed control devices (Governors), must be properly maintained at all times. DO check tension of driving belts, where fitted, on a regular basis. Belts must be kept tight to ensure full power transmission. DO always secure the workpiece firmly while it is being cut or ground. DO put portable machines in suitable cradles, when not being used, to avoid damage to the wheel. DO always use a portable machine in a comfortable position, where the workpiece is well balanced and the machine is well supported. DO grind at an angle above 30 degrees to the workpiece with a depressed centre grinding wheel. DO keep the working area around cutting and grinding operations clear. It is very dangerous if an operator trips and falls with an operating machine in his hands. DON’T handle wheels roughly. DON’T use non-reinforced cutting-off wheels on portable machines. DON’T store wheels in a damp atmosphere or in extreme temperatures. DON’T use a damaged wheel. DON’T EVER exceed the maximum operating speed marked on the wheel. DON’T force a wheel onto a machine spindle. DON’T use mounting flanges which are incorrect, damaged, dirty or burred. DON’T tighten the mounting nut or locking flange excessively. To do so can distort the flanges. DON’T use blotters with depressed centre wheels less than or equal to 406mm (EN 12413). DON’T use a machine which is not in good mechanical condition. DON’T use a machine without a wheel guard. DON’T use wheels without proper ventilation or dust protection equipment. DON’T apply side pressure to cutting-off wheels. You should not bend the wheel. DON’T stop the wheel by applying pressure to the periphery or face. Always switch the machine off and allow the wheel to stop revolving. DON’T allow the wheel to be trapped or pinched in the cut. DON’T apply excessive pressure onto the wheel so that the driving motor slows down. DON’T grind on the side of cutting-off wheels or depressed centre wheels below 4.0mm thickness. DON’T drop or lower a portable machine by the cable or airline onto the floor. A wheel can be easily cracked, f it is put down hard, by the weight of the machine. This is a common cause of wheel breakage. DON’T grind with a depressed centre grinding wheel at an angle below 30 degrees to the workpiece. DON’T use a machine in a position where you do not have full control of the machine and you are not well balanced.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
INFORMATION
Safety Advise - Do’s
NORTON INDUSTRIAL METAL Metal Grinding Wheels •
Centre Wheels will grind most steel, iron and metal workpieces Also known as DC, Depressed Centre and Raised Hub wheels
DIAMETER X THICKNESS X BORE
BARCODE 9310357-
100 X 6 X 16
265122
A24 Metal DC 15000
50
AD100616
115 X 6 X 22
265139
A24 Metal DC 13000
50
AD115622
125 X 6 X 22
300564
A24 Metal DC 12000
50
AD125622
180 X 6 X 22
300571
A24 Metal DC 8600
25
AD180622
230 X 6 X 22
300588
A24 Metal DC 6800
25
AD230622
GRADE
Max PRODUCT BOX RPM CODE
WHEELS
• Norton Industrial Metal Depressed
Metal Cutting Off Wheels • For cutting most steel and iron •
•
based materials Norton Industrial products are extremely consistent and developed to meet the highest industrial standards There is a bore size to suit all angle grinders and most common electric saws. Ask your Norton Representative for a bore size chart if required for point of sale purposes
HIGH SPEED VS LOW SPEED 300 and 350mm Cutting Wheels : Use Low or Standard Speed wheels for portable electric Cut Off Saws. Use High Speed blades for petrol driven Cut Off Saws.
( 09 ) 834 7119
DIAMETER X THICKNESS X BORE
Max PRODUCT BOX RPM CODE
BARCODE 9310357-
GRADE
100 X 2.5 X 16
264828
A36T Metal
15
100
AC100316
115 X 2.5 X 22
264835
A36T Metal
13
100
AC115322
125 X 2.5 X 22
264842
A36T Metal
12
100
AC125322
180 X 2.5 X 16
300250
A24T Metal
8 500
50
AC180316
180 X 2.5 X 20
300267
A24T Metal
8 500
50
AC180320
180 X 2.5 X 22
300274
A24T Metal
8 500
50
AC180322
200 X 2.5 X 16
300298
A24T Metal
7 600
50
AC200316
200 X 2.5 X 22
300304
A24T Metal
7 600
50
AC200322
200 X 2.5 X 25
300311
A24T Metal
7 600
50
AC200325
200 X 2.5 X 35
300328
A24T Metal
7 600
50
AC200335
230 X 2.5 X 22
300359
A24T Metal
6 600
50
AC230322
230 X 2.5 X 25
300342
A24T Metal
6 600
50
AC230325
230 X 2.5 X 35
300366
A24T Metal
6 600
50
AC230335
300 X 3 X 25
300397
A36P Metal
4 600
10
AC300325
350 X 3 X 25
300410
A36P Metal
3 900
10
AC350325
300 X 3.4 X 20
300694
A24R Hi-Speed
6 400
10
AC300420H
300 X 3.4 X 25
300755
A24R Hi-Speed
6 400
10
AC300425H
350 X 3.4 X 20
300700
A24R Hi-Speed
5 500
10
AC350420H
350 X 3.4 X 25
300762
A24R Hi-Speed
5 500
10
AC350425H
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.1.1
NORTON INDUSTRIAL MASONRY
• For grinding of Masonry, cast iron, •
and soft metals such as aluminium Also known as DC, Depressed Centre or Raised Hub Wheels
BOX
PRODUCT CODE
C24 Masonry 15 300
50
CD100616
301332
C24 Masonry 13 300
50
CD115622
125 X 6 X 22
301349
C24 Masonry 12 200
50
CD125622
180 X 6 X 22
300519
C24 Masonry
8 500
25
CD180622
230 X 6 X 22
300526
C24 Masonry
6 800
25
CD230622
DIAMETER X THICKNESS X BORE
BARCODE 9310357-
GRADE
Max RPM
BOX
PRODUCT CODE
100 X 2.5 X 16
265153
C24 Masonry 15 300 100
CC100316
115 X 2.5 X 22
264804
C24 Masonry 13 300 100
CC115322
125 X 2.5 X 22
264811
C24 Masonry 12 200 100
CC125322
180 X 2.5 X 16
300052
C24 Masonry
8 500
50
CC180316
180 X 2.5 X 20
300069
C24 Masonry
8 500
50
CC180320
180 X 2.5 X 22
300076
C24 Masonry
8 500
50
CC180322
200 X 2.5 X 16
300090
C24 Masonry
7 600
50
CC200316
200 X 2.5 X 22
300106
C24 Masonry
7 600
50
CC200322
200 X 2.5 X 25
300113
C24 Masonry
7 600
50
CC200325
200 X 2.5 X 35
300120
C24 Masonry
7 600
50
CC200335
230 X 2.5 X 16
300137
C24 Masonry
6 600
50
CC230316
230 X 2.5 X 22
300151
C24 Masonry
6 600
50
CC230322
230 X 2.5 X 25
300144
C24 Masonry
6 600
50
CC230325
230 X 2.5 X 35
300168
C24 Masonry
6 600
50
CC230335
300 X 3.4 X 20
300670
C24 Hi-Speed
6 400
10
CC300420
300 X 3.4 X 25
300175
C24 Hi-Speed
6 400
10
CC300425
350 X 3.4 X 20
300687
5 500
10
CC350420
350 X 3.4 X 25
300182
5 500
10
CC350425
DIAMETER X THICKNESS X BORE
BARCODE 9310357-
100 X 6 X 16
265160
115 X 6 X 22
GRADE
Max RPM
WHEELS
Masonry D/C Grinding Wheels
Masonry Cutting Off Wheels • For cutting Masonry and cement based products Designed for dry cutting
• • Also able to be used for cutting aluminium and cast iron
SAFETY FIRST Remember - Reinforced wheels can be dangerous if used incorrectly. Always wear eye and hearing protection when using cutting and grinding discs. Respiratory and hand protection is strongly recommended.
C24 Hi-Speed C24 Hi-Speed
HIGH SPEED VS LOW SPEED 300 and 350mm Cutting Wheels : Wheels designated High Speed may be used on petrol powered machines operating at 100 M/S periphery speed. Standard Speed wheels are designed for electric or air tools operating at 80 M/S. It is good operator practice to check that the wheel speed is correct for the machine prior to mounting the wheel.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.2.1
ULTRA THIN METAL C/O WHEELS
Barcode
DIAMETER X THICKNESS X BORE
76 X 1.6 X 10
315762 -
Max RPM
PACK
NZ PRODUCT CODE
25
ACT07519
15 300
25
ACT100116IX
GRADE
447425 4 57A46Z 19 100
100 X 1.0 X 16
931035726 A46T-BF41 6556
115 X 1.0 X 22
447492
57A46Z 13 300
25
ACT115122 IX
125 X 1.0 X 22
447510
57A46Z 12 300
25
ACT125122 IX
• 76mm wheel is designed for sheet metal cutting and automotive panels with 76mm small air cutting-off saws providing a fast, clean cut for small areas.
• 115mm & 125mm X 1.0 mm Ultra thins are primarily for cutting of up to 2.0mm thick sheetmetal.
• Iron, Sulphur and Chlorine Free - suitable for all structural and food grade stainless steel work.
• The thinner blade concentrates the power of the grinder to a small area and so
WHEELS
INOX Ultra Thin Metal Cutting Off Wheels
increases the cutting speed.
NORZON Thin Metal Cutting Off Wheels Barcode
PACK
NZ PRODUCT CODE
4NZ46Z 15 300
25
ACT100116 NZ
643457
4NZ46Z 13 300
25
ACT115122 NZ
125 X 1.6 X 22
643443
4NZ46Z 12 300
25
ACT125122 NZ
180 X 1.6 X 22
376770
4NZ46Z
8 500
25
ACT180222 NZ
230 X 1.9 X 22
376771
4NZ46Z
6 650
25
ACT230222 NZ
DIAMETER X THICKNESS X BORE
315762 -
100 X 1.6 X 16
455920
115 X 1.6 X 22
GRADE
Max RPM
• 1.6 mm thick NorZon 4 blades are specifically designed for cutting stainless steel and other sheet metals up to 3.0mm thick with an excellent balance between cutting speed and wheel life.
Norton Multi Purpose Cutting Off Wheels DIAMETER X THICKNESS X BORE
Barcode
115 X 1.0 X 22
GRADE
Max RPM
PACK
NZ PRODUCT CODE
5450248231400
C60TBF41
13 300
25
ACT115122MP
115 X 1.6 X 22
8711479427534
C46T
13 300
25
ACT115222MP
125 X 1.0 X 22
5450248231585
C46T
12 300
25
ACT125122MP
125 X 1.6 X 22
5711479427541
C46T
12 300
25
ACT125222MP
180 X 1.6 X 22
871179427336
C46T
8 500
25
ACT180222MP
230 X 1.6 X 22
5450248231592
C46T
25
ACT230222MP
-
6 650
• Norton Multi Purpose cutting wheels are designed to cut a wide range of materials including Plastics, Ceramic Tiles, Stone, ferrous and non-ferrous metals.
Norton Aluminium Cutting Off Wheels DIAMETER X THICKNESS X BORE
Barcode 3157624
-
GRADE
Max RPM
PACK
NZ PRODUCT CODE
115 X 1.6 X 22
474339
A30Q
13 300
25
ACT115122ALU
125 X 1.6 X 22
474360
A30Q
12 300
25
ACT125122ALU
• Norton Aluminium cutting wheels are specifically designed for cutting Aluminium and non ferrous metals.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.1
ULTRA THIN METAL C/O WHEELS FLEXOVIT Ultra Thin Metal Cutting Off Wheels Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
76 X 0.89 X 9.5
027089
A60T
23 900
100
3507610
102 X 1.0 X 16
005032
A46T
15 300
100
15102010
102 X 1.6 X 16
004295
A46T
15 300
100
15102016
115 X 1.0 X 22
004288
A46T
13 290
100
15115010
115 X 1.6 X 22
004295
A46T
13 290
100
15115016
115 X 2.0 X 22
038078
A46T
13 290
100
1511522
127 X 1.0 X 22
004271
A46T
12 250
100
15127010
127 X 1.6 X 22
004332
A46T
12 250
100
15127016
127 X 2.0 X 22
038108
A46T
12 250
100
1512722
178 X 2.0 X 22
004318
A46T
8 500
50
15178020
230 X 2.0 X 22
004301
A46T
6 650
50
15230020
WHEELS
DIAMETER X THICKNESS X BORE
• Iron, Sulphur and Chlorine Free - suitable for all structural and food grade stainless steel work.
• Low noise, Low dust and minimal vibration and reduced sparks. • Fast, precise burr free cutting with low energy consumption and reduced operator fatigue.
FLEXOVIT Ultra Thin Metal Cutting Off Wheels DC DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
125 X 2.0 X 22
074564
A46T
12 250
100
7312720
180 X 1.6 X 22
074625
A30V
8 500
50
7318016
230 X 1.9 X 22
074632
A30V
6 650
50
7323019
• Ultra thin premium grade - for cutting stainless steel and hard ferrous metals. • Free of iron, sulphur and chlorine • Excellent cutting performance and life.
FLEXOVIT Ultra Thin Metal Cutting Off Wheels DC DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
115 X 0.8 X 22
074588
A60V
13 300
25
73115080
125 X 0.8 X 22
074618
A60V
12 250
25
73125080
• Ultra thin premium grade - for cutting stainless steel and hard ferrous metals. • Free of iron, sulphur and chlorine • Fast, clean cutting and excellent life.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.2
SPECIALTY WHEELS FLEXOVIT All in One DIAMETER X THICKNESS X BORE
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 2.2 X 22
130291
A46S
15 300
25
7210016
115 X 2.2 X 22
130109
A46S
13 300
25
7211522
125 X 2.2 X 22
130116
A46S
12 250
25
7212522
Cutting, light grinding and polishing with one single product.
WHEELS
• • • • • •
Barcode
9314188
Low vibration; comfortable operation. The fine grit provides an excellent and uniform finishing result. Very smooth grinding result with an incredible clean surface. Low cutting temperature due to special filters. Free of iron, sulphur and chlorine.
FLEXOVIT Mega-View Grinding and Finishing Wheels DIAMETER X THICKNESS X BORE
• • • • • •
( 09 ) 834 7119
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
115 X 4.0 X 22
130208
A36T
13 300
20
72511536
115 X 4.0 X 22
130215
A60T
13 300
20
72511560
125 X 4.0 X 22
130222
A36T
12 250
20
72512536
125 X 4.0 X 22
130239
A60T
12 250
20
72512560
Continuous view of the work piece. Cool grinding thanks to 3 slots in the wheel. Light grinding and blending in one action. Long life. Low vibration and comfortable grinding. Uniquely patterned face prevents loading.
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.3
CUTTING OFF WHEELS FLEXOVIT Cutting Off Wheels Type 41 DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 2.5 X 16
001287
FH38
15 300
100
1010216
115 X 2.5 X 22
001324
FH38
13 300
100
1011522
125 X 2.5 X 22
001454
FH38
12 250
100
1012722
150 X 2.5 X 22
001676
FH38
10 200
50
1015222
180 X 2.5 X 16
001751
FH38
8 500
50
1017816
180 X 2.5 X 20
001805
FH38
8 500
50
1017820
180 X 2.5 X 22
001843
FH38
8 500
50
1017822
200 X 2.5 X 16
001935
FH38
7 650
50
1020316
200 X 2.5 X 22
001973
FH38
7 650
50
1020322
200 X 2.5 X 25.4
002031
FH38
7 650
50
1020325
200 X 2.5 X 35
002116
FH38
7 650
50
1020335
230 X 2.5 X 16
002161
FH38
6 650
50
1023016
230 X 2.5 X 22
002208
FH38
6 650
50
1023022
230 X 2.5 X 25.4
002246
FH38
6 650
50
1023025
230 X 2.5 X 35
002338
FH38
6 650
50
1023035
254 X 3.1 X 25.4
008019
2UU
7 650
50
2025425
GRADE
Max RPM
PACK
PRODUCT CODE
A60TB
30 550
25
3505010
WHEELS
General Purpose
• General purpose cutting of ferrous metals. • Excellent cutting performance and life.
Iron Free DIAMETER X THICKNESS X BORE
Barcode
9314188
50 X 0.89 X 9.53 76 X 0.89 X 9.53
027089
A60TB
25 000
50
3507510
100 X 2.5 X 16
006039
FH38
15 300
100
1810216
115 X 2.5 X 22
006169
FH38
13 300
100
1811522
125 X 2.5 X 22
006299
FH38
12 250
100
1812722
180 X 2.5 X 22
006558
FH38
8 500
50
1817822
230 X 2.5 X 22
006688
FH38
6 650
50
1823022
• Standard grade—for cutting stainless steel and ferrous metals. • Free of iron (I/F). • Excellent cutting performance and life.
GRADE
Max RPM
PACK
PRODUCT CODE
007043
A36S
5 100
20
1930525
356 X 3.0 X 25.4
007173
A36S
4 400
10
1935625
406 X 3.0 X 25.4
007302
A36S
3 850
10
1940625
Barcode
DIAMETER X THICKNESS X BORE
9314188
300 X 3.0 X 25.4
• General purpose cutting of stainless steel and ferrous metals (bar, tubing, etc.). • Fast cutting and excellent life. ( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.4
CUTTING OFF WHEELS FLEXOVIT Cutting Off Wheels Type 41 DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 2.5 X 16
005025
FH38
15 300
100
1610216
115 X 2.5 X 22
005155
FH38
13 300
100
1611522
125 X 2.5 X 22
005285
FH38
12 250
100
1612722
180 X 2.5 X 22
005582
FH38
8 500
50
1617822
230 X 2.5 X 22
005674
FH38
6 650
50
1623022
• For cutting non-ferrous metals such as aluminium, copper, brass and bronze. • Has a load resistant bond.
WHEELS
Aluminium
Masonry DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 3.2 X 16
030140
FH64
15 300
100
4010216
115 X 3.2 X 22
030188
FH64
13 300
100
4011522
125 X 3.2 X 22
030355
FH64
12 250
100
4012722
180 X 3.2 X 16
030799
FH64
8 500
50
4017816
180 X 3.2 X 20
030836
FH64
8 500
50
4017820
180 X 3.2 X 22
030874
FH64
8 500
50
4017822
200 X 3.2 X 16
031024
FH64
7 650
50
4020316
200 X 3.2 X 22
031062
FH64
7 650
50
4020322
200 X 3.2 X 25.4
031109
FH64
7 650
50
4020325
200 X 3.2 X 35
031192
FH64
7 650
50
4020335
230 X 3.2 X 16
031284
FH64
6 650
50
4023016
230 X 3.2 X 22
031321
FH64
6 650
50
4023022
230 X 3.2 X 25.4
031369
FH64
6 650
50
4023025
230 X 3.2 X 35
031451
FH64
6 650
50
4023035
• General purpose dry cutting of most masonry products (e.g. brick, concrete pavers, ceramic and stone).
• Also suitable for non-ferrous metals • Long life
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.5
CUTTING OFF WHEELS FLEXOVIT Type 42 Pipeliners DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 3.4 X 16
063179
A30S
15 300
100
6310234
115 X 3.4 X 22
063308
A30S
13 300
100
6311534
125 X 3.4 X 22
060277
A24/30
12 250
100
6012734
180 X 3.4 X 22
060536
A24/30
8 500
50
6017834
230 X 3.4 X 22
060703
A24/30
6 650
50
6023034
• General purpose cutting ferrous metals including structural settle and sheet
WHEELS
General Purpose DC PIPELINER
metals.
• Excellent cutting performance and life. • Suitable for notching.
Iron Free DC PIPELINER DIAMETER X THICKNESS X BORE
• • • •
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
115 X 3.4 X
067177
A30S
13 300
100
6711534
125 X 3.4 X
068143
A24/30
12 250
100
6812734
180 X 3.4 X
068402
A24/30
8 500
50
6817834
Standard grade—for cutting stainless steel and ferrous metals. Free of iron (I/F). Fast cutting and excellent life. Suitable for notching
Mega-Inox DC PIPELINER DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
115 X 2.5 X 22
002543
A24V
13 300
100
7411525
125 X 2.5 X 22
002529
A24V
12 250
100
7412725
180 X 2.5 X 22
002505
A24V
8 500
50
7417825
180 X 3.0 X 22
002499
A24V
8 500
50
7417830
230 X 2.5 X 22
002482
A24V
6 650
50
7423025
• Premium grade—for cutting stainless steel and ferrous metals. • Free of iron, sulphur and chlorine. • EXcellent cutting performance and life.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.6
GRINDING WHEELS FLEXOVIT Grinding Wheels Type 27 DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 6.0 X 16
063254
A30S
15 300
50
6310260
115 X 6.0 X 22
063384
A30S
13 300
50
6311560
• General purpose grinding of ferrous metal welds and structural steels. • Excellent grinding performance and stock removal.
A24/30T DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
125 X 6.8 X 22
060352
A24/30T
12 250
50
6012768
180 X 4.5 X 22
060574
A24/30T
8 500
40
6017845
180 X 6.8 X 22
060611
A24/30T
8 500
25
6017868
230 X 6.8 X 22
060796
A24/30T
6 650
10
6023068
WHEELS
A30S General Purpose
• General purpose grinding of ferrous metal welds and structural steels. • Excellent grinding performance and life.
A24/30P DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
180 X 6.8 X 22
061496
A24/30P
8 500
25
6117868
230 X 6.8 X 22
061731
A24/30P
6 650
10
6123068
• For grinding harder metals (e.g. alloy steels, hard facing, Ni-hard, etc.). • Excellent grinding performance and fast stock removal.
Iron Free DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 6.0 X 16
067122
A30S
15 300
50
6710260
115 X 6.0 X 22
067252
A30S
13 300
50
6711560
125 X 6.8 X 22
068228
A24/30T
12 250
50
6812768
180 X 6.8 X 22
068488
A24/30T
8 500
25
6817868
230 X 6.8 X 22
068617
A24/30T
6 650
25
6823068
• Standard grade—for general purpose grinding of stainless steel and harder ferrous metals.
• Free of iron (I/F). • Excellent grinding performance and stock removal.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.7
GRINDING WHEELS FLEXOVIT Grinding Wheels Type 27 DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 6.0 X 16
069102
A30S
15 300
50
6910260
115 X 6.0 X 22
069232
A30S
13 300
50
6911560
125 X 6.8 X 22
070313
A24/30P
12 250
50
7012768
180 X 6.8 X 22
070535
A24/30P
8 500
25
7017868
230 X 6.8 X 22
070665
A24/30P
6 650
25
7023068
• For grinding non-ferrous metals such as aluminium, copper, brass and bronze. • Has a load resistant bond.
WHEELS
Aluminium
Masonry DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 6.0 X 16
075103
C30R
15 300
50
7510260
115 X 6.0 X 22
075233
C30R
13 300
50
7511560
125 X 6.8 X 22
075363
C30R
12 250
50
7512768
180 X 6.8 X 22
075622
C30R
8 500
25
7517868
230 X 6.8 X 22
075882
C30R
6 650
25
7523068
• General purpose grinding of most masonry products (e.g. brick, concrete and stone).
• Also suitable for non-ferrous metals.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.8
FLEXIBLE WHEELS FLEXOVIT Grinding Wheels Type 27 DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 3.0 X 16
221104
AC46
15 300
20
8210246
115 X 3.0 X 22
221586
AC46
13 300
25
8211546
125 X 3.0 X 22
222071
AC46
12 250
25
8212746
125 X 3.0 X 22
222118
AC60
12 250
25
8212760
• Used for light weld grinding and polishing of most metals including aluminium. • Excellent performance and finish. • Special plastic backing pad must be used and in included in each standard
WHEELS
AC Series—Flexible Wheels
pack.
WA Series—Flexible Wheels DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
100 X 3.0 X 16
220107
WA46
15 300
20
82310046
115 X 3.0 X 22
220206
WA46
13 300
25
82311546
125 X 3.0 X 22
220305
WA46
12 250
25
82312546
180 X 3.0 X 22
220404
WA46
8 500
10
82318046
• Used for light weld grinding and polishing of stainless steel. • Excellent performance and finish. • Special plastic backing pad must be used and in included in each standard pack.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.9
HIGH SPEED WHEELS FLEXOVIT High Speed Petrol Saws—Demolition Saws DIAMETER X THICKNESS X BORE
Barcode
9314188
GRADE
Max RPM
PACK
PRODUCT CODE
302 X 3.4 X 20
008149
2UU
6 200
20
2030220
300 X 3.4 X 22
008224
2UU
6 200
20
2030522
305 X 3.4 X 25.4
008279
2UU
6 200
20
2030525
356 X 3.8 X 20
008408
2UU
5 460
10
2035620
406 X 4.4 X 20
004202
2UU
4 780
10
2040620
406 X 4.4 X 25.4
008668
2UU
4 780
10
2040625
305 X 3.4 X 25
010531
A36Q AL
6 200
10
2330525
356 X 3.8 X 25
016373
2UE
5 460
10
2835625
356 X 4.0 X 25.4
005735 65A243P
5 500
10
3135602
WHEELS
Metal Cutting
• 2UU760SS - General purpose for structural steels, pipe and tube etc. • 2UE790QR - Specially manufactured for rail cutting. Also suitable for some harder materials.
• A36Q ALU - Cutting non-ferrous metals, aluminium, bronze and brass. • 65A243P - Rail Cutting
Masonry Cutting GRADE
Max RPM
PACK
PRODUCT CODE
031673
FH64
6 200
20
4030220
305 X 3.4 X 22.2
031710
FH64
6 200
20
4030522
305 X 3.4 X 25.4
031758
FH64
6 200
20
4030525
356 X 4.1 X 20
033172
FH3714
5 460
10
4335620
356 X 4.1 X 25.4
033257
FH3714
5 460
10
4335625
FH3714
3 820
10
4340625
Barcode
DIAMETER X THICKNESS X BORE
9314188
302 X 3.4 X 20
406 X 4.2 X 25.4
• FH64 & FH3714 - Dry cutting of concrete, blocks, pipe, bricks. Fast dry cutting long life.
( 09 ) 834 7119
Free Fax 0800 40 40 44
sales.nz@saint-gobain.com
3.3.10