MASSIVE EXPANSION OF CHEMICAL PUMP SERIES

KSB SE & CO. KGAA HAS ADDED 19 sizes to its MegaCPK type series. Users can now choose from 55 sizes with more than 78 hydraulic systems for these standardised chemical pumps. The available materials of grey cast iron, nodular cast iron and cast steel, stainless steel, as well as duplex and special alloys such as titanium and Hastelloy, result in an extensive range of applications. Fluids that require heating or cooling can also be handled.

The pumps are characterised primarily by their high output per size and their low energy consumption. Not only does this save on electricity consumption, but it also reduces the user’s initial investment. KSB’s developers have placed particular emphasis on good suction behaviour, with a low NPSH value to minimise the risk of cavitation. This enables smooth and stable pump operation even under difficult operating conditions. It also ensures a high degree of reliability and improves the availability of an entire system.

By using the finite element method (FEM), a calculation method for the simulation of solids, the developers were able to achieve a high degree of strength and rigidity of the installed components while at the same time optimising the use of materials. After optimising all hydraulic contours using computational fluid dynamics (CFD) the improvements were verified in test set ups.

The new seal chamber design allows the installation of gland packings, all common mechanical seals compliant with EN 12756, and many cartridge-type mechanical seals. Fully confined casing gaskets and minimised axial thrust ensure long service life. To control and monitor operation, the pumps can be equipped with speed control, vibration and bearing temperature measurement