1 minute read

9.2 Projection into Minimum Yards

9.1.14 Notwithstanding Section 9.1.12, a fence, building, wall, or enclosure is not required if the pool or hot tub is equipped with a CSA certified lockable cover.

9.1.15 The area around an above-ground pool or hot tub shall be sloped to drain either to a lane or road and away from adjacent properties. Pools or hot tubs shall not be drained into the Town’s sanitary system.

9.2 PROJECTION INTO MINIMUM YARDS

9.2.1 The following features and structures may project into a required minimum setback area, subject to the approval of the Development Authority as per Table 9.2:

9.2.2 Notwithstanding Table 9.2, in no situation shall the projection into any required setback be closer than 0.45m (1.5ft) to an adjoining property line.

TABLE 9.2

PROJECTION

Maximum Residential Building and Structure Projections

FRONT YARD SETBACK AREA REAR YARD SETBACK AREA SIDE YARD SETBACK AREA

Eaves 0.6m (2.0ft) maximum

Shade Projections 0.6m (2.0ft) maximum Bay or Oriel Windows 0.6m (2.0ft) maximum

Chimney

0.6m (2.0ft) maximum Belt Courses and Sills 0.6m (2.0ft) maximum

Covered Balconies 0.6m (2.0ft) maximum

Covered Balconies (Apartment Dwelling) 0.6m (2.0ft) maximum

Unenclosed Balconies, Steps and Entrance Ways

2.0m (6.56ft) maximum Uncovered Decks 1.2m (3.9ft) maximum) 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum

0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 0.6m (2.0ft) maximum 1.5m (4.9ft) maximum 0.6m (2.0ft) maximum 3.0m (9.8ft) maximum Not Permitted

This article is from: