Rev 2:4
283E 283ES 283ED
Powder Coated Finish
MERCEDES A CLASS (W176) (Exc AMG) 2012MERCEDES B CLASS (W246) (Exc AMG) 2012MERCEDES CLA CLASS (C117) (Exc AMG) 2013E11 55R-0110409 w1029
Components Code Mainframe
Quantity
Description
Bolt Kit Code
Quantity
Description
CB
1
Crossbar
WA
14
12mm Large Round Washers
LB
1
Left Bracket
B
12
12x35 Bolts, Nuts & Grip Washers
RB
1
Right Bracket
C
2
12x35 Bolts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.
Remove bumper, undo tip screws (1 each side of wheel arch) plastic push clips (2 each side: 1 situated in the wheel arch and 1 at the bottom). There are 2 fixings to bumper support in the centre on lower edge of the bumper.
2.
Remove rear panel trim inside the boot to reveal 2 apertures (these will be hidden behind adhesive underseal). There are 2 nuts with fixed washers inside the back panel on long bolts.
3.
Remove trim to access light clusters, undo 2 fasteners each side and unplug cluster before removing.
4.
Gently ease off bumper.
5.
Remove bumper support beam, 4 fixings altogether.
6.
Insert brackets LB & RB into chassis and loosely attach using bolts C with washers WA. Loosely attach brackets LB & RB to the back panel using bolts B and washers WA.
7.
Attach crossbar CB to brackets LB & RB using bolts B with washers WA underneath.
8.
Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
Detachable Neck: Attach to crossbar CB using bolts Z. Swan Neck: Attach to crossbar CB with CP10 plates (standard orientation)using set screws Y & bolts W. Flange Neck: Attach to crossbar CB using bolts A, then attach type approved (not supplied) to flange neck using bolts G.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:4
238E 238ES 238ED
Powder Coated Finish
MERCEDES A CLASS (W176) (Exc AMG) 2012MERCEDES B CLASS (W246) (Exc AMG) 2012MERCEDES CLA CLASS (C117) (Exc AMG) 2013-
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
238E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com