Rev 2:1
649E 649ED 649ES
Powder Coated Finish
BMW 3 SERIES SALOON (E90) 2005-2012, TOURER ESTATE (E91) 2005-2012 & COUPE (E92) 2007-2013 e11*94/20*2933*01 w
Components
Mainframe
Code
Quantity
CB
1
Bolt Kit
Description Crossbar
Code
Quantity
X
6
Description Use existing BMW fixings
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove rear bumper (fixings along lower edge, screws around each wheel arch, remove rear light clusters, one tip screw and one screw by light cluster beneath plastic cap). 2. Ease top edge of bumper off starting at each corner—tip: use releasing fluid to assist on ease of removal. 3. Disconnect reversing sensors where fitted. 4. Temporarily remove rear impact beam and retain fixings. 5. Attach crossbar CB to rear impact beam mountings and replace impact beam and fully tighten using original fixings. 6. Trim bumper lug as shown in diagram and replace bumper. 7. Flange Neck. Attach flange neck F to mainframe CB using fasteners A with type approved towball (not supplied) using fasteners B. 8. Detachable Neck. Attach detachable neck D using fasteners Z. 9. Swan Neck. Attach swan neck S using fasteners A. 9. Tighten all fasteners using a calibrated torque tool to the recommended torque settings on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
649E 649ED 649ES
Powder Coated Finish
BMW 3 SERIES SALOON (E90) 2005-2012, TOURER ESTATE (E91) 2005-2012 & COUPE (E92) 2007-2013
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com