Rev 2:1
675E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description
Flange Neck
Code
Quantity
A G
2 2
w493
Description
12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
675E 675ED 675ES
Powder Coated Finish
BMW 5 SERIES SALOON (E60) 2003-2010 & TOURER ESTATE (E61) 2004-2010 e11*94/20*8264*00 w428
Components
Mainframe
Code
Quantity
CB
1
Description Crossbar
Bolt Kit Code
Quantity
Description
WB
8
10mm Large Round Washers
B
8
10x40 Set Screws & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove bumper (2 torx screws behind trim panels in the boot, 5 push clips along wheel arch, plus clips along bottom edge of bumper). Disconnect reversing sensor loom. Remove and discard bumper crush beam. 2. Attach mainframe CB to the existing captive nuts on back panel using set screws B with washers WB. Fully tighten set screws. 3. Refit bumper and reversing sensor loom. Detachable Neck: Atttach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using CPE10 plates (standard orientation) with set screws Y & bolts W Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using fasteners G. 4. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
675E 675ED 675ES
Powder Coated Finish
BMW 5 SERIES SALOON (E60) 2003-2010 & TOURER ESTATE (E61) 2004-2010
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com