Ramsey_pages.qxd
1/7/08
11:13 AM
Page 2
WINCHES Patriot 9500UT
NEW!
• Semi-automatic clutch used with wireless remote engages and operates winch up to 50 ft. away • 4-way roller fairlead • Limited lifetime warranty • Automatic load-holding brake • 3-Stage planetary gear system • 105 ft. of 5/16" galvanized aircraft cable with clevis hook and latch
Patriot 9500UT comes with both wireless remote control and 12 ft. wire pendant.
Patriot Series • 4-way roller fairlead • Limited lifetime warranty • 12 ft. wire pendant or wireless remote • Automatic load-holding brake • 3-Stage planetary gear system
Patriot Profile 12,000 Patriot 15,000
Patriot 9500
REP 8.5e
REP 9.5e
• Hawse fairlead • Limited lifetime warranty • 12 ft. wire pendant • Automatic load holding brake • Cam action clutch for free spooling
• Hawse fairlead • Limited lifetime warranty • 12 ft. wire pendant • Automatic load holding brake • Cam action clutch for free spooling
Badger 2500
TR 5000
• Hawse or roller fairlead • Limited lifetime warranty • Motor switch or12 ft. wire pendant • Automatic load holding brake • Cam action clutch for free spooling
• Mounting platform hawse fairlead • Limited lifetime warranty • 12 ft. wire pendant • Automatic load holding brake • Cam action clutch for free spooling • Cable tensioner
RE Series • 4-way roller fairlead • Limited lifetime warranty • 12 ft. wire pendant • Semi-Automatic RAM-LOK clutch disengages for free spooling • Series wound motor with worm gear provides load reversing protection
Winch Ordering Information Part # RAM109198 RAM109159 RAM109160 RAM109194 RAM109196 RAM109153 RAM109154 RAM112158 RAM110597 RAM112162 RAM110414 RAM111073 RAM111090 RAM115102 RAM115101 RAM111077 RAM111008 RAM111037 RAM111040 * ** *** ****
Description Patriot 9500UT* Patriot 15,000 Patriot 15,000* Patriot Profile 12,000 Patriot Profile 12,000* Patriot 9500 Patriot 9500* RE 8000 RE 8000 RE 12,000 RE 12,000 REP 8.5e REP 9.5e Badger 2500 Badger 2500** TR 5000 QM 5000*** QM 8000**** QM 9000****
Capacity 9500 lbs. 15,000 lbs. 15,000 lbs. 12,000 lbs. 12,000 lbs. 9500 lbs. 9500 lbs. 8000 lbs. 8000 lbs. 12,000 lbs. 12,000 lbs. 8500 lbs. 9500 lbs. 2500 lbs. 2500 lbs. 5000 lbs. 5000 lbs. 8000 lbs. 9000 lbs.
Motor 5.5 hp. 12V DC 5.5 hp. 12V DC 5.5 hp. 12V DC 5.5 hp. 12V DC 5.5 hp. 12V DC 5.5 hp. 12V DC 5.5 hp. 12V DC 4.8 hp. 12V DC 2.5 hp. 24V DC 4.8 hp. 12V DC 2.5 hp. 24V DC 2.5 hp. 12V DC 2.5 hp. 12V DC .9 hp. 12V DC .9 hp. 12V DC 1.3 hp. 12V DC 1.3 hp. 12V DC 5.5 hp. 12V DC 4.4 hp. 12V DC
Weight 99 lbs. 150 lbs. 153 lbs. 123 lbs. 125 lbs. 97 lbs. 98 lbs. 130 lbs. 130 lbs. 130 lbs. 130 lbs. 56 lbs. 88 lbs. 21 lbs. 21 lbs. 47 lbs. 75 lbs. 105 lbs. 105 lbs.
Comes with wireless remote control Comes with 12' wired remote only Comes with 80' x 1/4" cable Comes with 95' x 5/16" cable
NOTE: All winches come with 12 ft. remote control pendant unless otherwise specified
WWW.CROFTTRUCKSA.COM 2 WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
CALL 210-227-5187 1503 N. BRAZOS SAN ANTONO TEXAS 78207
Ramsey_pages.qxd
1/7/08
11:13 AM
Page 3
WINCHES Quick Mount Systems - Front or Back Mount • Hawse fairlead • 12 Volt electric winch • 3-Stage planetary gear system • Automatic load holding brake • Clutch for free spooling • Weather shielded solenoids • 12 ft. remote control • Anti-theft locking pin • Limited lifetime warranty QM 5000, QM 8000 and QM 9000 will mount into any standard Class III rear receiver hitch with a 5,000 lb. min. WC rating. Receiver must not be recessed more than 1" from bumper face. Additional power leads required.
For Planetary (Patriot and REP Series)
QM 8000
Winch Accessories Wireless Remote Wireless remote works without cables or switches and operates the winch up to 50 ft. away, installs in minutes. Synthetic Winch Rope Technora fiber synthetic rope comes in 100 ft. (30.5M) of 3/8" (9MM) with oversize 1/2" clevis hooks. Lightweight, pliable, easy to handle with strong heat resistance rated for winches up to 9500 lbs. Aluminum Hawse fairlead is recommended to prevent premature wear. Aluminum Fairlead Guides synthetic rope onto winch drum and helps prevent abrasion. Remote Control Pendant Replacement 12' remote control pendant. Safety On / Off Switch In Cab-12 Volt Switch kit turns power off to winch when not in use. On-off switch can be mounted in vehicle cab for easy access.
Mounting Kit Selection Guide
Mounting Channel Used for most general mounting applications. Rated for 5,000 lbs. through 9,500 lbs. off road self-recovery work winches. Not for RE winch models. Accessory Kit The off-road winch accessory kit comes with a 30,000 lbs. (13,607 kgs) maximum capacity swivel side plate shackle-type snatch block with a greasable sheave, forged steel shackle 6'x3' (1,8 m x 7,6 cm) tree trunk saver, leather faced work gloves with protective cuffs and a durable black Cordura® nylon bag. Neoprene Winch Cover Black neoprene cover protects winch from harsh weather elements without tie down straps. Battery Power Leads 24V DC extra long battery leads.
Accessories Ordering Information Part # Description Ship Weight RAM251200 Wireless Remote 4 lbs. RAM251262 Synthetic Winch Rope 11 lbs. RAM251266 Aluminum Fairlead 2 lbs. RAM251110 12' Remote Control Pendant 3 lbs. RAM282062 Safety On / Off Switch In Cab-12V 2 lbs. RAM251053 5' Battery Power Leads-Front Mount 15 lbs. RAM251021 20' Battery Power Leads-Rear Mount 14 lbs. RAM251054 24' Battery Power Leads-Rear Mount 25 lbs. RAM328157 Optional Dust Cover 2 lbs. RAM251126 24' Mounting Channel 17 lbs. RAM251127 30' Mounting Channel 24 lbs. RAM251128 36' Mounting Channel 28 lbs. RAM251215 Accessory Kit 12 lbs. Neoprene Winch Covers 2 lbs. RAM251264 Badger Cover RAM251269 REP 6000/8000/9000 solenoid banded to motor RAM251270 Patriot Profile 6000/8000/9000/9500 solenoid mounted above motor RAM251271 Patriot Profile 6000/8000/9000/9500, REP 6000/8000/9000 without solenoid mounted to winch RAM251259 Patriot 6000/8000/9500 with solenoid assembly mounted above tie bars
WWW.CROFTTRUCKSA.COM WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
Description Chevrolet/GMC 2007-2008 1500 Silverado/Sierra Sierra Grille Guard 2007-2008 2500HD/3500 Silverado/Sierra Sierra Grille Guard Patriot 12/15 Grille Guard 2003-2006 1500 Silverado/Sierra Sierra Grille Guard Sierra Wraparound 2003-2006 1500HD/2500 Silverado/Sierra; 2500HD/3500 Sierra Sierra Grille Guard Sierra Wraparound Grille Guard (Patriot 12,000/15,000) QM Front Receiver 2003-2006 2500HD/3500 Silverado Sierra Grille Guard Sierra Wraparound Grille Guard (Patriot 12,000/15,000) QM Front Receiver 2000-2006 1500 Suburban/Tahoe/Yukon XL/Yukon Sierra Grille Guard Sierra Wraparound Chrysler/Jeep 2007-2008 Jeep Wrangler JK (2dr & 4dr) Original 1997-2006 Jeep Wrangler TJ TJ Sport 1986-1995 Jeep Wrangler YJ Original 1970-1986 CJ & Scrambler Original Dodge 2002-2005 1500 Ram Sierra Grille Guard 2003-2005 2500, 3500 Ram Sierra Wraparound Grille Guard (Patriot 12,000/15,000 ) QM Front Receiver Ford 2008 F-250, F-350, F-450, F-550 Super Duty Sierra Wraparound Sierra Grille Guard Patriot 12/15 Grille Guard QM Front Receiver 2004-2008 F-150 (Old body style Heritage models use 2003 kits) Sierra Wraparound Sierra Grille Guard 2003-2006 Ford Expedition Sierra Wraparound Sierra Grille Guard 1999-2003 F-150 4x4;1999-2002 Expedition 4x4 Sierra Grille Guard 2005-2007 F-250, F-350, F-450, F-550 Super Duty/Excursion Sierra Wraparound Sierra Grille Guard Grille Guard (Patriot 12,000/15,000) QM Front Receiver
Part # RAM295959 RAM295952 RAM295954 RAM295933 RAM295932 RAM295936 RAM295937 RAM295369 RAM251078 RAM295934 RAM295935 RAM295369 RAM251078 RAM295921 RAM295922 RAM295378 RAM295241 RAM295150 RAM295137 RAM295930 RAM295938 RAM295371 RAM251253 RAM295950 RAM295951 RAM295957 RAM295958 RAM295943 RAM295942 RAM295945 RAM295944 RAM295919 RAM295947 RAM295946 RAM295374 RAM295375
For Worm Gear (RE Series) Description Part # Chevrolet/GMC 2007-2008 2500HD/3500 Silverado/Sierra RE Grille Guard RAM295953 2003-2006 1500HD/2500 Silverado/Sierra; 2500HD/3500 Silverado/Sierra Grille Guard RAM295367 Dodge 2003-2005 2500, 3500 Ram Grille Guard RAM295370 Ford 2008 F-250, F-350, F-450, F-550 Super Duty RE Grille Guard RAM295955 RE Wraparound RAM295956 2005-2007 F-250, F-350, F-450, F-550 Super Duty/ Excursion Grille Guard RAM295372 Wraparound RAM295373 2001-2004 F-250, F-350, F-450, F-550 Super Duty/Excursion Grille Guard RAM295340
CALL 210-227-5187 3 1503 N. BRAZOS SAN ANTONO TEXAS 78207
As the only approved supplier of winches for the U.S. Military’s HMMWV (Hummer), all Mile Marker Military Hydraulic Winch systems must meet or exceed the following list of Testing, Quality Assurance, and Military Standard Requirements for the U.S. Government. This is only a partial listing of the requirements met or exceeded by Mile Marker Hydraulic Winches.
Specifications •Cable, Type I, Class 2, Construction 4, extra improved plowsteel, galvanized, minimum .375-inch diameter, IAW RR-W-410, 100 feet minimum, lubricated with Amsoil MP/HD (heavy duty metal protector) and installed on winch drum. •Cable, hook, fasteners and swaged sleeve assembled shall withstand a minimum pull of 14,400 lbs. without separation of assembly or deformation of hook. •The winch assembly shall be compatible with hydraulic fluid IAW GM-6297M •Hydraulic motor shall be compatible with and function when subjected to fluid temperatures of -40 to +250 degrees Fahrenheit (-40.0 to +121.1 degrees Celsius) without leakage. Performance requirements All performance requirements shall be initiated with winch assembly sealed to prevent contamination from dust, oil and water and start with five wraps of wire rope on the bare drum. Rated layer load requirements shall start on the third wrap of the tested layer. Also, the timing of the winch shall not be affected if the wire cable becomes crossed wrapped. At that time, the winch shall be stopped and the cable shall be adjusted before continuing with remaining time. A: Hot Temperature Requirements The winch assembly shall be capable of pulling a minimum load of 9,000 lbs. on first layer for a minimum distance of 12 feet. Without stopping, the winch shall be capable of pulling a minimum load of 4,000 lbs. for 55 feet at a minimum ambient temperature of 125 degrees Fahrenheit (51.7 degrees Celsius) during test. Oil Temperature may be cooled to 200 degrees Fahrenheit (93.3 degrees Celsius) if required. B: Cold Temperature Requirement (low gear) The winch assembly shall be capable of pulling a minimum load of 9,000 lbs. on the first layer for a minimum distance of 12 feet. Then, without stopping, the winch shall be capable of pulling a minimum load of 4,000 lbs. for 55 feet at a maximum ambient temperature of -40 degrees Fahrenheit (40 degrees Celsius).
THE U.S. MILITARY TRUSTS ONLY MILE MARKER HYDRAULIC WINCHES FOR THEIR HUMVEES (HMMWVS) - YOU CAN TOO. Mile Marker sells a hydraulic winch for civilian and commercial applications. If you are a serious off-roader or have commercial trucks that travel off roads – you need a Mile Marker hydraulic winch. See page 3.
PAGE 1
2009 PRODUCT CATALOG
C: Functional Requirement (low gear) The winch assembly shall be operated with a 24-28 VDC electrical power source and a 1.5 GPM 1300 PSI minimum to 4 GPM 1500 PSI maximum hydraulic power source. Winch shall be capable of continuously pulling a minimum line load of 4,000 lbs. for a minimum distance of 55 feet, within a maximum time period of 28 minutes at an ambient temperature of 60 to 90 degrees Fahrenheit (15.6 to 32.2 degrees Celsius). D: Rated Layer Load Requirements The winch assembly shall be capable of continuously pulling each layer of wire rope at the rated layer line load as specified in the following:
LOW GEAR Layer number Min. rated line load (lb.) Rope capacity (ft.) Max load/stall (lb.) Max amp draw
1 9000 17 10500 2
2 7500 20 9200 2
3 6100 24 7900 2
4 5000 28 6500 2
High GEAR Layer number Min. rated line load (lb.) Rope capacity (ft.) Max load/stall (lb.) Max amp draw
1 1200 17 1700 2
2 1100 20 1600 2
3 1000 24 1450 2
4 800 28 1400 2
E: Durability Requirements (low gear) The winch assembly shall be capable of completing a minimum of 50 durability cycles, one cycle shall be capable defined as follows: The winch assembly shall pull a minimum load of 4,000 lbs. a minimum distance of 60 feet within a maximum time period of 28 minutes, at an ambient temperature between 60 and 90 degrees Fahrenheit (15.6 to 32.2 degrees Celsius). At the start and every 10 cycles, check cable for wear. F: Functional Requirement (high gear) The winch assembly system shall be operated with a 24-28 VDC electrical power source and a 1.5 GPM 1300 PSI minimum to 4 GPM 1500 PSI maximum hydraulic power source, Winch shall be capable of continuously pulling a minimum line load of 600 lbs. for a minimum distance of 55 feet within a maximum time period of five minutes, at ambient temperatures between 60 and 90 degrees Fahrenheit (15.6 to 32.2 degrees Celsius). G: Durability Requirements (high gear) The winch assembly shall be capable of completing a minimum 50 durability cycles. One cycle means the winch assembly shall pull a minimum load of 600 lbs. a minimum distance of 55 feet within a maximum time period of five minutes, at an ambient temperature between 60 and 90 degrees Fahrenheit (15.6 to 32.2 degrees Celsius). At the start of each cycle and every 10 cycles, check cable for wear. •The winch shall be equipped with two speed (gearing) settings (low and high). the winch shall also be equipped with a locking and free spool setting. •The handles which engage and disengage the winch settings shall be permanently stamped IAW MIL-STD-130, with the words low, high and free. When levers are engaged in positions, as noted in the table below, the winch shall operate as indicated in mode columns below:
Lever #1 Free Low Low Free
Lever #2 Free High Free High
Position Free spool Lock Low gear High gear
Submergence Requirement: •The winch solenoid assembly shall meet the requirements of MIL-STD-1184, type II, class II, test method 100. •The winch solenoids shall be powered by a 24-28 VDC power source. A hydraulic pump shall provide 1300 PSI minimum pressure at 1.5 GPM minimum flow to the hydraulic motor, and a maximum of 3.5 GPM and at 1500 PSI. Initial Production Inspection (IPI) •Complete dimensional and tolerance verification. Complete performance verification of noted test requirements. Material/finish certification verification.
- UNLIMITED DUTY CYCLE – PULLS ALL DAY AND ALL NIGHT ·POWERFUL ·RUGGED AND RELIABLE AS A HUMVEE -THOUSANDS IN USE IN THE DESERTS, JUNGLES, FORESTS AND ANYWHERE THERE ARE HUMVESS -THOROUGHLY TESTED BY TACOM
·WATERPROOF ·FAST WITH 2 SPEEDS ·EASILY CONNECTS TO THE POWER STEERING PUMP – NO PTO REQUIRED. -ALLOWS YOU TO USE THE VEHICLE’S DRIVE TRAIN IN THE RECOVERY.
2009 PRODUCT CATALOG
PAGE 2
HYDRAULIC WINCHES
LEGENDARY POWER... TRUE CONTINUOUS DUTY CYCLE...
TWO SPEED Spool Cable
and light loads quick and effortlessly in high gear; drop into low gear for serious pulling power.
SUBMERSIBLE Com-
pletely sealed from the elements; Can operate under water.
SMOOTH OPERATION
Planetary Gear Train is the smoothest running self-recovery system available.
The Mile Marker Hydraulic Winch BUILT TO LAST Heavy System has been a Duty Aluminum & self-recovery icon for over Ductile Iron Bodies and Stainless Steel 15 years. This legendary system Hardware provide a utilizes the vehicle’s OEM power steering lifetime of abuse. pump as its power source. Everyday, more than 200 million power steering pumps operate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump. Steering is arguably the most important function while driving, so the power steering pump has evolved into the most reliable system on vehicles today. Mile Marker chose to design a winch to use this continuous reliable power supply over the battery power used by competitors. After rigorous testing, we learned it was the right choice. The Mile Marker Hydraulic Winch can run continuously under load without any battery drain. This Hydraulic Winch System is the choice of the U.S Army, as Mile Marker became the primary self-recovery outfitter for the HMMWV (Hummer) as well as many other tactical vehicles around the globe.
NEW!
18,000 LB Capacity See Page 5
HYDRAULIC WINCHES H18K: 18,000 POUND
PAGE 5
Mile Marker introduces its largest winch ever: The 18,000 Pound Hydraulic Winch. This powerful, compact unit is a versatile tool that can accommodate endless applications.
H SERIES HYDRAULIC
PAGE 6
The H-Series Hydraulic Winch Line offers the most versatility in mounting and installation options. With a completely independent solenoid control valve and multi-directional motor positions, the H Series is the professional choice for a custom recovery system application.
HI SERIES HYDRAULIC
PAGE 7
The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. This outfit is designed to be installed with a permanent location in mind.
HYDRAULIC WINCHES
HYDRAULIC WINCHES
H-18K
PAGE 3
PRODUCT CATALOG
PRODUCT CATALOG
PAGE 4
18K HYDRAULIC WINCH
H SERIES
NEW!
H-18K
18,000 LB Capacity (8164 kg) PN: 70-58000C
H9000
PRODUCT FEATURES: Part Number Rated line pull Gear Train Gear Ratio Motor
PRODUCT FEATURES: •Stainless Steel Tiebars •96’ of 1/2” Cable Capacity on Short Drum (29.2 m of 12.7 mm cable) •168’ of 1/2” (12.7 mm) Cable Capacity on Long Drum (56.4 m of 12.7 mm cable)
70-58000C 18,000 lbs (8164 Kgs)
Planetary, Hardened Steel Gear 18:1 High Gear, 6:1 Low Gear 11.9 C.I (195 CC) 19.01” X 9.99” X 9.96” Short Drum
Dimensions (LxWxH)
(483 mm X 254 mmX 253 mm)
24.01” X 9.99” X 9.96” Long Drum (610 mm X 254 mmX 253 mm)
Kgs
1 6000 2722 2 4917 2230 3 4167 1890 4 3600 1633 5 3183 1444 6 2850 1293 * Layers 5 and 6 do not comply with SAE J706 Standard
•2 Speed •Freespooling •Mechanical Lock •Can Use Underwater •Corrosion Resistant •Stainless Steel Tie Bars and Fasteners •100 Feet Galvanized Aircraft Cable •Reversible Mounting on 3 Sides (H12000 Only) •Ductile Iron Body (H12000 Only)
Gear Train Gear Ratio
Planetary 6:1
Motor
9k: 14 cubic inch 10.5k: 17.9 cubic inch 12k: 19.5 cubic inch
Control Pendant
Not Included, Requires 34 Series Kit
Cable
3/8” X 100’ (nominal 14,400 lbs)
Drum Size:
2.5” X 9” (63.5 mm X 228.6 mm) H9000, H10500: 93 lbs (42.2 kgs) H12000: 98 lbs (45 kgs) 4 Bolt Pattern, 4.5” X 10”,
Net weight
0.5” Galvanized Aircraft Cable Nominal Breaking Strength = 26,600 lbs
Bolt Pattern
Drum Size: Diameter/Length Flange Diameter
4.0” X 5” (101.6 mm X 127 mm) - Short Drum 4.0” X 10” (101.6 mm X 254 mm) - Long Drum
Power Steering Min. Requirements:
Net weight
127 lbs (57.6 Kgs) with out cable - Short Drum 157 lbs (57.6 Kgs) with out cable - Long Drum
Bolt Pattern
6.48” X 8” (164.6 mm X 203.2 mm) - Short Drum 11.48” X 8” (164.6 mm X 291.6 mm) - Long Drum 8 bolts, 5/8”-11
9” (228.6 mm)
High Speed Performance Specification (max. 1500 PSI) (max 103.4 bars)
Lbs
12,000 LB (5443 kg) Capacity PN: 70-52000C
PRODUCT SPECIFICATIONS:
Recommended Cable
Complying Standards SAE J706
PERFORMANCE: Rated Line Pull
H12000
10,500 LB (4763 kg) Capacity PN: 70-50050C
The Mile Marker H Series Hydraulic Winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. This system is independent from its solenoid control valve to give more freedom in mounting options and vehicle application. The installation of one of the H Series models (H9000, H10500, and H12000) requires a vehicle specific 34-Series valve adapter kit (see application chart on page 8).
Mile Marker introduces its largest winch to date: the H18K. Offering a full 18,000 pounds of pulling and recovery power, this hydraulic winch can be utilized in many applications from Military Vehicles, to Industrial Utility Vehicles, to Commercial Tow and Recovery Vehicles and beyond. Requiring only a hydraulic flow of 4 gpm at 1500 psi, this winch can be powered by either stock power steering pumps, or PTO systems.
LAYER
•POWER STEERING PUMP POWERED •100% DUTY CYCLE •SUBMERSIBLE
H10500
9,000 LB (4082 kg) Capacity PN: 70-50080C
•FAST LINE SPEED •OEM POWER PUMP STEERING OR PTO DRIVEN •VERSATILE DESIGN ADAPTS TO MANY APPLICATIONS •AVAILABLE IN BOTH SHORT AND LONG DRUM VERSIONS
•2 Speed winch •Free Spooling •Mechanical Lock •Heavy Duty Disc Brake •Heavy Duty Engagement Clutch •Fast line speed •Fast Line Speed •Sealed Against Elements •Can Use Under Water •Corrosion Resistant Aluminum Body
HYDRAULIC WINCH
Line Speed Short Drum
H9000 3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars) Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 6.16 9,000 33.6 1,500
2 7.48 7,300 38.4 1,200
(9.53 mm X 30.5 m)
(114.3 mm X 254 mm)
3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
H10500
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars) 3 8.8 6,200 48 1,000
4 10.5 5,400 57 900
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 2 5.65 6.43 10,500 8,500 31 36 1,600 1,300
3 7.41 7,400 42 1,200
4 8.58 6,400 48 1,000
H12000
Cable Capacity At 15 GPM (56.8.1 L/m)
PERFORMANCE:
34 SERIES ADAPTER KIT REQUIRED. SEE APPLICATION CHART ON PAGE 8.
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
At 4 GPM (15.1 L/m)
At 10 GPM (38 L/m)
Long Drum
fpm
mpm
fpm
mpm
fpm
mpm
ft
m
ft
m
11.8 14.4 17.0 19.6 22.3 24.9
3.6 4.4 5.2 6.0 6.8 7.6
29.5 36.0 42.5 49.1 55.6 62.2
9.0 11.0 13.0 15.0 17.0 19.0
51.1 62.4 73.7 85.1 96.4 107.8
15.6 19.0 22.5 25.9 29.4 32.9
10.6 23.3 37.6 54.7 74.0 96.0
3.1 7.0 11.5 16.7 22.6 29.3
20.6 45.0 74.0 106.0 144.0 185.0
6.3 13.7 22.6 32.3 43.9 56.4
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
Low Speed Performance Specification (max. 1500 PSI) (max 103.4 bars) Rated Line Pull
Lbs Kgs 1 18000 8165 2 14750 6690 3 12500 5670 4 10800 4899 5 9550 4332 6 8550 3878 * Layers 5 and 6 do not comply with SAE J706 Standard
PAGE 5
PRODUCT CATALOG
Line Speed At 4 GPM (15.1 L/m)
At 10 GPM (38 L/m)
fpm 3.9 4.8 5.7 6.5 7.4 8.3
fpm 9.8 12.0 14.2 16.4 18.5 20.7
mpm 1.2 1.5 1.7 2.0 2.3 2.5
mpm 3.0 3.7 4.3 5.0 5.7 6.3
Cable Capacity At 15 GPM (56.8.1 L/m) fpm 17.0 20.8 24.6 28.4 32.1 35.9
mpm 5.2 6.3 7.5 8.6 9.8 11.0
Short Drum ft 10.6 23.3 37.6 54.7 74.0 96.0
m 3.1 7.0 11.5 16.7 22.6 29.3
Long Drum ft 20.6 45.0 74.0 106.0 144.0 185.0
m 6.3 13.7 22.6 32.3 43.9 56.4
HYDRAULIC WINCHES
HYDRAULIC WINCHES
LAYER
PRODUCT CATALOG
PAGE 6
HI SERIES HI9000
HYDRAULIC WINCH
HI10500
9,000 LB (4082 kg) Capacity PN: 75-50080C
HI12000
10,500 LB (4763 kg) Capacity PN: 75-50050C
34KIT
HI9000 3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars) Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 6.16 9,000 33.6 1,500
2 7.48 7,300 38.4 1,200
4 10.5 5,400 57 900
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars) 1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
34-5020-14 34-5010-12 34-5010-13
Motor
9k: 14 cubic inch 10.5k: 17.9 cubic inch 12k: 19.5 cubic inch
Control Pendant
Illuminated Joystick Remote, 12’
34-5010-09 34-5020-07
Cable
3/8” X 100’ (nominal 14,400 lbs)
34-5010-07H
Drum Size:
2.5” X 9” (63.5 mm X 228.6 mm) H9000, H10500: 103 lbs (47 kgs) H12000: 110 lbs (50 kgs) 4 Bolt Pattern, 4.5” X 10”,
Bolt Pattern
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
34-5020-06 34-5020-04 34-5020-05 34-5010-34 34-5020-35 34-5020-10
(114.3 mm X 254 mm)
3.5 GPM @ 1500 psi
Illuminated Joystick Remote Control 3 7.41 7,400 42 1,200
1997+ ford F-150, Expedition 78-96 Ford full size. 97-98 F250, F350 78-98 Ford full size (with hydroboost) 72-77 Ford full size 83-92 Ford Ranger, 90-94 Explorer 92-96 Ford Ranger, 95-96 Explorer 99-04 Ford 250, 350, 450, 550, Excursion 2005 and up Ford 250, 350,450, 550, Excursion 02+ Ford Ranger/Sport Trac
DODGE
(13.25 L/m @ 103.4 bars)
1 2 5.65 6.43 10,500 8,500 31 36 1,600 1,300
88+ GM C/K,99+ Tahoe/Suburban, Silverado 72-87 GM C/K, 88-91 RV series GM S-series GM S-series w/4.3L Vortec
FORD
(9.53 mm X 30.5 m)
HI10500
HI12000
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
35 SERIES ADAPTER KIT REQUIRED. SEE APPLICATION CHART ON PAGE 8.
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars) 3 8.8 6,200 48 1,000
CHEVY/GMC
Planetary 6:1
Power Steering Min. Requirements:
PERFORMANCE:
Included in Kit: 12 ft. lead remote control, All hoses and fittings included, Power in and Power out, Remote Solenoid-activated control valve (draws only 2 amps), Adapter for vehicle specific power steering pump. Rated to 7 gpm. Required for H Series Winches.
Gear Train Gear Ratio
Net weight
REMOTE SOLENOID VALVE
34-5010-15
PRODUCT SPECIFICATIONS:
•2 Speed •Mechanical Lock •Freespooling •Integrated Solenoid Valve •Can Use Underwater •Corrosion Resistant •Stainless Steel Tie Bars and Fasteners •100 Feet Galvanized Aircraft Cable •Reversible Mounting on 3 Sides (H12000 Only) •Ductile Iron Body (H12000 Only)
HSERIES
HISERIES
VEHICLE SPECIFIC APPLICATIONS
INTEGRATED SOLENOID VALVE
12,000 LB (5443 kg) Capacity PN: 75-52000C
The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, solenoid control valve, remote control, roller fairlead with fasteners, and winch cable. To adapt to your vehicle’s power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) require a vehicle specific 35-series vehicle adapter kit (see page 8).
PRODUCT FEATURES:
HYDRAULIC WINCH ADAPTER KITS
•POWER STEERING PUMP POWERED •100% DUTY CYCLE •INTEGRATED SOLENOID VALVE •SUBMERSIBLE
4 8.58 6,400 48 1,000
34-5010-24 34-5020-23 34-5010-20 34-5020-22
INTERNATIONAL
Dodge 94+full size Dodge 72-93 full size Dodge Dakota 4 cylinder Dodge Dakota 6 & 8 cylinder
34-5010-18
Truck & Scout
34-5010-50 34-5020-51 34-5020-55
Jeep Cherokee Jeep CJ, Scrambler Jeep YJ, TJ & Rubicon
Jeep
35KIT
To be used to adapt power steering pump to HI Series Winch System. Includes vehicle specific power steering pump fittings and adapters.
PART NUMBER:
APPLICATION:
35-5020-15
GM, Dodge, International, Chevrolet, H2
35-5020-22
2003 & up Durango
35-5020-07
Ford, up to 1998
35-5020-34
Ford 1999 to 04; F-150 1997 to 04
35-5020-10
Ford SportTrac/Ranger
35-5020-51
Jeep
35-5020-31
Nissan
35-5020-41
Toyota
35-5020-45
Land Rover
35-5020-17
AM General–Hummer H1
35-5020-35
2005 and up Ford Super Duty
35-5020-36
2007 Ford F-550 Only
35-5020-81
Chevy 5500
NISSAN 34-5010-30 34-5010-31
34KIT
Nissan 86-93 except Pathfinder 91-95, 94-96 truck 91-95 Nissan Pathfinder, 94-96 truck
TOYOTA 34-5020-41
Toyota All
LAND ROVER AM GENERAL 34-5010-17 34-5010-15
HI (Civilian) H2
34-5010-01 34-5011-00
General kit; does not include PS pump Valve only; 24-volt system (No hose, fittings)
34-5010-80
(International 7400)
HYDRAULIC WINCHES
GENERAL KIT MEDIUM DUTY TRUCKS
PAGE 7
PRODUCT CATALOG
Land Rover Discovery 94-98
35KIT PRODUCT CATALOG
PAGE 8
HYDRAULIC WINCHES
34-5010-45