Toilets
To see the full Raymor range visit raymor.com.au
raymor.com.au Available exclusively at Tradelink
What to consider when selecting a toilet
Dare we say it, toilets these days are pretty trendy. With a wide range of designs and options to choose from, the toilet you get could make or break your bathroom look. However, you also need to factor in details about plumbing, use and available space.
Installation Type
Back-to-Wall (BTW)
These toilets sit flush to the wall, concealing the inlet and waste pipes. This makes cleaning around the toilet much easier.
Close Coupled (C/C)
The most common and affordable toilet. The cistern sits near the wall and the rear of the pan is offset from the wall.
Wall-faced/Wall-hung
Only the toilet pan is visable, and the cistern in concealed behind the wall. Perfect for small bathrooms. Wall-hung toilets have space underneath and Wall-faced toilets the pan sits on the floor.
Comfort/Easy Height suites
These have an increased pan height for your comfort.
2
Tips for selecting a toilet
Try before you buy
Well, not really. But if possible, sit on the toilet and test how the lid and seat lift. Know what you’re getting.
Keep a record of what you’ve bought
Just in case you need to replace any parts, it always helps if you’ve kept the receipt or noted down the toilet brand and design so that you can replace it with a like-for-like swap-out.
Know your set-out measurements
This is the distance from your wall or floor to the centre of the wastepipe in your floor, depending on the type of toilet you have. You must know this figure. Without it, your toilet might not fit.
Think about the space around you
When planning the position of your toilet, allow at least 20cm on either side for elbow room.
If you’re replacing an existing toilet
Always check with your plumber about your options first. There will be specs that suit your existing bathroom best. With our range, you’re sure to meet these needs with a style you like.
Some councils have water efficiency rules
Toilets come with WELS ratings according to their water efficiency. Some councils require a minimum WELS rating for your toilet, so be sure to check this first.
To see the full Raymor range visit raymor.com.au 3
Rimless Close Coupled Toilet Suites
To see the full Raymor range visit raymor.com.au 5 Classic Rimless Close Coupled Suite Product Code 194379 WELS Rating 4 Star 3.5L Avg Flush Material Vitreous China Rim Type Rimless Trap Type S Trap Set Out S Trap set out 153mm as standard Seat Type Soft Close, Quick release with metal hinges Inlet Valve WDI Universal inlet valve Outlet Valve WDI Dual Flush Outlet Valve Inclusions Pan, Cistern, Seat, Installation Instructions 425 395 155 242 FINISHED FLOOR 345 FINISHED FLOOR 708 Set Out Drawing 785 153 FINISHED WALL 340 Classic Rimless Close Coupled Suite 194380 4 Star 3.5L Avg Flush Vitreous China Rimless P Trap P Trap Set Out 185mm floor to centre of outlet Soft Close, Quick release with metal hinges WDI Universal inlet valve WDI Dual Flush Outlet Valve Pan, Cistern, Seat, Installation Instructions 620 490 50 152 240 75 ø73 16 5 350 405180 37 5 405
Rimless Back to Wall Suites
Atlanta Rimless Back to Wall Suite (Standard Seat)
194381
4 Star 3.5L Avg Flush
Vitreous China
Rimless Universal S-trap set out 65mm - 175mm as standard. P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 75mm - 200mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Atlanta Rimless Back to Wall Suite (Slim Seat)
Product Code 194382
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type Universal
Set Out S-trap set out 65mm - 175mm as standard. P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 75mm - 200mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
370 248
370
Optional Set Out Drawing
665
(End of Pan to Outlet)
Set Out: 145 - 240
Pan Connector Sold Separately: 136002
370
Optional Set Out Drawing
665
(End of Pan to Outlet)
Set Out: 145 - 240
Pan Connector
Separately: 136002
To see the full Raymor range visit raymor.com.au 7
185
215
405 90
418 FINISHED FLOOR
95 FINISHED FLOOR 155 Pan
Optional
FINISHED WALL 755
835 185
215
405 90
248 418 FINISHED FLOOR 370 95 FINISHED FLOOR 155 Pan
Optional
Sold
FINISHED WALL 755
835
Alpha Rimless Back to Wall Suite (Standard Seat)
Product Code
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type
Set Out S-trap set out 75mm - 190mm as standard. P-trap set out 185mm floor to centre of outlet.
S-trap set out 145mm - 225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet
WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation
Alpha Rimless Back to Wall Suite (Slim Seat)
S-trap set out 75mm - 190mm as standard.
P-trap set out 185mm floor to centre of outlet.
Optional S-trap set out 145mm - 225mm sold seperately.
Soft Close, Quick release with metal
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
Out
-
136002
194383
Universal
Optional
Valve
Instructions
hinges
185 655 175 (End of Pan to Outlet) 395 124.5 365 265 370 FINISHED FLOOR 360 58 FINISHED FLOOR 160 Pan Set Out: 145
225 Standard Pan Connector:
FINISHED WALL 715 Optional Set Out Drawing 790 185 655 175 (End of Pan to Outlet) 395 124.5 365 265 370 FINISHED FLOOR 360 58 FINISHED FLOOR 160 Pan Set Out: 145 - 225 Standard Pan Connector: 136002 FINISHED WALL 715 Optional Set
Drawing 790
Edge II Rimless Back to Wall Suite (Slim Seat)
Product Code 202492
WELS Rating 4 Star 3.5L
Material Vitreous China
Rim Type Rimless Trap Type
Flush
Set Out S-trap set out 65mm - 175mm as standard. P-trap set out 185mm floor to centre of outlet.
S-trap set out 95mm - 220mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI
(bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
inlet
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation
Edge II Rimless Back to Wall Suite (Standard Seat)
4 Star
S-trap
185mm
out
WDI
to centre of outlet.
- 220mm sold seperately.
release with
(bottom
-
WDI Dual Flush Outlet
Pan, Cistern, Standard
hand or rear left
to bottom left hand entry)
Variance Bend,
9
Avg
Universal
Optional
universal
valve
Instructions
3.5L Avg Flush
set out 65mm - 175mm as standard. P-trap set out
floor
Optional S-trap set
95mm
Soft Close, Quick
metal hinges
universal inlet valve
right
hand entry
adjustable
Valve
Seat,
Installation Standard Pan Connector: 136001 Pan Set Out: 65~175 218(End of pan to Outlet) FINISHED FLOOR OPTIONAL PAN CONNECTOR SOLD SEPARATELY: 136002 Pan Set Out: 95~220 218(End of pan to Outlet) FINISHED FLOORFINISHED FLOOR FINISHED FLOOR SET OUT DRAWING FINISHED FLOOR FINISHED FLOOR OPTIONAL OUT DRAWING 700 170 450 390 20 401 795 340 360 90 290 353 185 360 90 340 290 353 795 20 401 450 390 170 700 Standard Pan Connector: 136001 Pan Set Out: 65~175 218(End of pan to Outlet) FINISHED FLOORFINISHED FLOOR SET OUT DRAWING FINISHED FLOOR FINISHED FLOOR OPTIONAL OUT DRAWING 700 170 390340 360 90 185 360 90 340 290 353 795 20 401 450 390 170 700
Edge II Rimless Comfort Height Suite (Standard Seat)
4 Star 3.5L Avg Flush
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet.
Optional S-trap set out 95mm - 220mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
Edge II Rimless Comfort Height Suite (Slim Seat)
4 Star 3.5L Avg Flush
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet.
Optional S-trap set out 95mm - 220mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
366
Optional Set Out Drawing
865 185
295
(End of Pan to Outlet)
Set Out: 145 - 250
Pan Connector Sold Separately: 136002
Optional Set Out Drawing
865
(End of Pan to Outlet)
Set Out: 145 - 250
Connector Sold Separately: 136002
218
FINISHED FLOOR Pan
Optional
700 175 FINISHED WALL
FINISHED FLOOR 353 782
84
99 440
218
FINISHED FLOOR Pan
Optional Pan
700 175 FINISHED WALL 295 FINISHED FLOOR 353 782
84 366 99 440
185
Winton Rimless Back to Wall Suite (Slim Seat)
Product Code 203149
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type Universal Set Out S-trap set out 90mm-165mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 150mm-225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve R&T Side entry inlet valve
Outlet Valve R&T Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Winton Rimless Back to Wall Suite (Standard Seat)
Product Code 203150
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type Universal Set Out S-trap set out 90mm-165mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 150mm-225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve R&T Side entry inlet valve
Outlet Valve R&T Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
To see the full Raymor range visit raymor.com.au 11
(End of pan to Outlet) Pan Set Out 1 8 53 0 90-165 190 115FINISHED FLOOR 615 135 F I N I S H E D W A L L 8 3 0 4 0 5 3 0 4 1 5 365 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 7 5 0 (End of pan to Outlet) Pan Set Out 1 8 53 0 90-165 190 115FINISHED FLOOR 615 135 F I N I S H E D W A L L 8 3 0 4 0 5 4 5 4 1 5 363 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 7 5 0
Product
Rimless Comfort Height Suite
90mm-170mm
out 185mm
to
150mm230mm
S-trap
seperately.
12 Winton
Code 203151 WELS Rating 4 Star 3.5L Avg Flush Material Vitreous China Rim Type Rimless Trap Type Universal Set Out S-trap set out
as standard P-trap set
floor
centre of outlet Optional
set out
sold
Seat Type Soft Close, Quick release with metal hinges Inlet Valve R&T Side Entry Inlet Valve Outlet Valve R&T Dual Flush Outlet Valve Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions (End of pan to Outlet) Pan Set Out 4 5 5 4 5 8 8 0 370 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 8 0 0 FINISHED FLOOR 620 (End of pan to Outlet) Pan Set Out 1 8 5 4 5 5 4 5 8 8 0 3 0 90-170 190 115 F I N I S H E D W A L L 370 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 8 0 0 FINISHED FLOOR 135620
Rimless Inwall Toilet Suites
Edge II Rimless Wall Faced Pan & Slim Seat
Product Code 203147
WELS Rating 4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless
Trap Type Universal Set Out P-trap set out 185mm S-trap set out 90mm -105mm as standard
Extended S-trap set out 150mm-165mm optional (136002 sold seperately)
Reduced S-trap set out 60-90mm optional (181055 sold separately)
Extended S-trap set out 95-125mm optional (181054 sold separately)
Seat Type Soft close slim seat, quick release metal hinges Cistern Compatibility Compatible with 133137 in wall cistern (sold separately)
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Edge II Rimless Wall Faced Pan & Standard Seat
Product Code 203148
WELS Rating 4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless Trap Type Universal
Set Out P-trap set out 185mm S-trap set out 90mm -105mm as standard
Extended S-trap set out 150mm-165mm optional (136002 sold seperately)
Reduced S-trap set out 60-90mm optional (181055 sold separately)
Extended S-trap set out 95-125mm optional (181054 sold separately)
Seat Type Soft close seat, quick release metal hinges Cistern Compatibility Compatible with 133137 in wall cistern (sold separately)
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
To see the full Raymor range visit raymor.com.au 15
363 275 FINISHED FLOOR FINISHED FLOOR End of pan to Outlet 560 Pan Set Out F I N I S H E D W A L L 1 8 5 4 0 5 35 90~105 130 363 275 FINISHED FLOOR FINISHED FLOOR End of pan to Outlet 560 Pan Set Out F IN I S HE D W A L L 1 8 5 4 05 35 90 105 130
16 In Wall Cistern Product Code 133137 WELS Rating 4 Star 3.5L Avg Flush Material Foam insulated ABS tank Width 480mm Thickness 90mm Height 1140mm Height adjusment range 150mm Operation Mechanical Compatability Suitable for Raymor Wall Faced Pans 203147, 203148 Inlet Valve Side entry inlet valve (fixed top left water point) Outlet Valve 4.5/3L dual flush outlet valve Buttons Not included Inclusions Cistern, Installation instructions Cistern
Buttons
Dual Flush Plate, Round, Stainless Steel
Product Code 133599
Material Stainless steel Finish Brushed Width 236mm Height 152mm Plate thickness 11.5mm
Operation Mechanical, half and full flush Compatibility Suitable for installation with In Wall cistern 133137 Inclusions Flush plate, Installation instructions
17
Dual Flush Plate, Round, Matte Black Product Code 153204 Material ABS
Finish Matte Black Width 236mm Height 152mm Plate thickness 8mm Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Brushed Nickel
Product Code 275326 Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
18
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Round, Matte Silver
Product Code 285372 Material ABS
Finish Matte Silver Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Chrome
Product Code 153205 Material ABS
Finish Chrome plated
Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 19
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Rectangular, Black
Product Code 275327 Material ABS
Finish Matte Black Width 236mm Height 152mm
Plate thickness 8mm Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Chrome
Product Code 153203 Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
20
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Rectangular, Matte Silver
Product Code 285373 Material ABS
Finish Matte Silver Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Brushed Nickel
Product Code 275328 Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 21
1 5 2 236 1 0 10 15 3 0 1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Oval, Chrome Product Code 275329 Material ABS
Finish Chrome Plated Width 236mm Height 152mm Plate thickness 8mm Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Brushed Nickel
Product Code 275331 Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
22
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Oval, Black
Product Code 275330 Material ABS
Finish Matte Black Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Matte Silver
Product Code 285374 Material ABS
Finish Matte Silver Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 23
1 5 2 236 1 0 10 15 3 0 1 5 2 236 1 0 10 15 3 0
Whilst all care has been taken to ensure that all details are correct at the time of print, we reserve the right to correct any errors, inaccuracies or omissions. Tradelink excludes liability for any advice or information contained in this catalogue. Readers should rely on their own enquiries in making any decisions about any of the products in this catalogue. ©Tradelink Pty Ltd 2022
24 @Raymorau facebook.com/Raymorau raymor.com.au