Toilets raymor.com.au
Available exclusively at Tradelink
see the full Raymor range visit raymor.com.au
To
What to consider when selecting a toilet Installation Type
Dare we say it, toilets these days are pretty trendy. With a wide range of designs and options to choose from, the toilet you get could make or break your bathroom look. However, you also need to factor in details about plumbing, use and available space.
Back-to-Wall (BTW)
These toilets sit flush to the wall, concealing the inlet and waste pipes. This makes cleaning around the toilet much easier.
Close Coupled (C/C)
The most common and affordable toilet. The cistern sits near the wall and the rear of the pan is offset from the wall.
Wall-faced/Wall-hung
Only the toilet pan is visable, and the cistern in concealed behind the wall. Perfect for small bathrooms. Wall-hung toilets have space underneath and Wall-faced toilets the pan sits on the floor.
Comfort/Easy Height suites
These have an increased pan height for your comfort.
2
Tips for selecting a toilet
Try before you buy
Well, not really. But if possible, sit on the toilet and test how the lid and seat lift. Know what you’re getting.
Keep a record of what you’ve bought
Just in case you need to replace any parts, it always helps if you’ve kept the receipt or noted down the toilet brand and design so that you can replace it with a like-for-like swap-out.
Know your set-out measurements
This is the distance from your wall or floor to the centre of the wastepipe in your floor, depending on the type of toilet you have. You must know this figure. Without it, your toilet might not fit.
Think about the space around you
When planning the position of your toilet, allow at least 20cm on either side for elbow room.
If you’re replacing an existing toilet
Always check with your plumber about your options first. There will be specs that suit your existing bathroom best. With our range, you’re sure to meet these needs with a style you like.
Some councils have water efficiency rules
Toilets come with WELS ratings according to their water efficiency. Some councils require a minimum WELS rating for your toilet, so be sure to check this first.
To see the full Raymor range visit raymor.com.au 3
Rimless Close Coupled Toilet Suites
Classic Rimless Close Coupled Suite
Product Code 194379
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type S Trap
Set Out S Trap set out 153mm as standard
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Seat, Installation Instructions
Classic Rimless Close Coupled Suite 194380
4 Star 3.5L Avg Flush
Vitreous China Rimless P Trap
P Trap Set Out 185mm floor to centre of outlet
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Seat, Installation Instructions
To see the full Raymor range visit raymor.com.au 5
425 395 155 242 FINISHED FLOOR 345 FINISHED FLOOR 708 Set Out Drawing 785 153 FINISHED WALL 340
620 490 50 152 240 75 ø73 16 5 350 405180 37 5 405
Rimless Back to Wall Suites
Atlanta Rimless Back to Wall Suite (Standard Seat)
194381
4 Star 3.5L Avg Flush Vitreous China
Rimless Universal
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 75mm - 200mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Atlanta Rimless Back to Wall Suite (Slim Seat)
Product Code 194382
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 75mm - 200mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Set Out
to Outlet)
- 240
Connector Sold Separately:
Set Out Drawing
Outlet)
To see the full Raymor range visit raymor.com.au 7
185 665 215 (End of Pan
405 90 370 248 418 FINISHED FLOOR 370 95 FINISHED FLOOR 155 Pan Set Out: 145
Optional Pan
136002 FINISHED WALL 755 Optional
Drawing 835 185 665 215 (End of Pan to
405 90 370 248 418 FINISHED FLOOR 370 95 FINISHED FLOOR 155 Pan Set Out: 145 - 240 Optional Pan Connector Sold Separately: 136002 FINISHED WALL 755 Optional
835
Alpha Rimless Back to Wall Suite (Standard Seat)
Product Code 194383
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type Universal
Set Out S-trap set out 75mm - 190mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 145mm - 225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI Universal inlet valve
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Alpha Rimless Back to Wall Suite (Slim Seat)
S-trap set out 75mm - 190mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 145mm - 225mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
Optional Set Out Drawing
Connector:
Optional Set Out Drawing
185 655 175 (End of Pan to Outlet) 395 124.5 365 265 370 FINISHED FLOOR 360 58 FINISHED FLOOR 160 Pan Set Out: 145 - 225 Standard Pan
136002 FINISHED WALL 715
790 185 655 175 (End of Pan to Outlet) 395 124.5 365 265 370 FINISHED FLOOR 360 58 FINISHED FLOOR 160 Pan Set Out: 145 - 225 Standard Pan Connector: 136002 FINISHED WALL 715
790
Edge II Rimless Back to Wall Suite (Slim Seat)
Product Code 202492
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet.
Optional S-trap set out 95mm - 220mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve WDI universal inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
Outlet Valve WDI Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Edge II Rimless Back to Wall Suite (Standard Seat)
4 Star 3.5L Avg Flush
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet.
Optional S-trap set out 95mm - 220mm sold seperately.
Soft Close, Quick release with metal hinges
WDI universal inlet valve (bottom right hand or rear left hand entry - adjustable to bottom left hand entry)
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
9
Standard Pan Connector: 136001 Pan Set Out: 65~175 218(End of pan to Outlet) FINISHED FLOOR OPTIONAL PAN CONNECTOR SOLD SEPARATELY: 136002 Pan Set Out: 95~220 218(End of pan to Outlet) FINISHED FLOORFINISHED FLOOR FINISHED FLOOR SET OUT DRAWING FINISHED FLOOR FINISHED FLOOR OPTIONAL OUT DRAWING 700 170 450 390 20 401 795 340 360 90 290 353 185 360 90 340 290 353 795 20 401 450 390 170 700 Standard Pan Connector: 136001 Pan Set Out: 65~175 218(End of pan to Outlet) FINISHED FLOORFINISHED FLOOR SET OUT DRAWING FINISHED FLOOR FINISHED FLOOR OPTIONAL OUT DRAWING 700 170 390340 360 90 185 360 90 340 290 353 795 20 401 450 390 170 700
Edge II Rimless Comfort Height Suite (Standard Seat)
4 Star 3.5L Avg Flush
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 95mm - 220mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
Edge II Rimless Comfort Height Suite (Slim Seat)
4 Star 3.5L Avg Flush
S-trap set out 65mm - 175mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 95mm - 220mm sold seperately.
Soft Close, Quick release with metal hinges
WDI Universal inlet valve
WDI Dual Flush Outlet Valve
Pan, Cistern, Standard Seat, Variance Bend, Installation
Set Out
(End of Pan to Outlet)
Set Out: 145 - 250
Connector Sold Separately: 136002
Set Out Drawing
(End of Pan to Outlet)
Set Out: 145 - 250
136002
218
FINISHED FLOOR Pan
Optional Pan
700 175 FINISHED WALL 295 FINISHED FLOOR 353 782 Optional
Drawing 84 366 99 440 865 185 218
FINISHED FLOOR Pan
Optional Pan Connector Sold Separately:
700 175 FINISHED WALL 295 FINISHED FLOOR 353 782 Optional
84 366 99 440 865 185
Winton Rimless Back to Wall Suite (Slim Seat)
Product Code 203149
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless
Trap Type Universal Set Out S-trap set out 90mm-165mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 150mm-225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve R&T Side entry inlet valve
Outlet Valve R&T Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Winton Rimless Back to Wall Suite (Standard Seat)
Product Code 203150
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless Trap Type Universal Set Out S-trap set out 90mm-165mm as standard.
P-trap set out 185mm floor to centre of outlet. Optional S-trap set out 150mm-225mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve R&T Side entry inlet valve
Outlet Valve R&T Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Outlet)
To see the full Raymor range visit raymor.com.au 11
(End of pan to
Pan Set Out 1 8 53 0 90-165 190 115FINISHED FLOOR 615 135 F I N I S H E D W A L L 8 3 0 4 0 5 3 0 4 1 5 365 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 7 5 0 (End of pan to Outlet) Pan Set Out 1 8 53 0 90-165 190 115FINISHED FLOOR 615 135 F I N I S H E D W A L L 8 3 0 4 0 5 4 5 4 1 5 363 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 7 5 0
Winton Rimless Comfort Height Suite
Product Code 203151
WELS Rating 4 Star 3.5L Avg Flush
Material Vitreous China
Rim Type Rimless
Trap Type Universal
Set Out S-trap set out 90mm-170mm as standard P-trap set out 185mm floor to centre of outlet Optional S-trap set out 150mm230mm sold seperately.
Seat Type Soft Close, Quick release with metal hinges
Inlet Valve R&T Side Entry Inlet Valve
Outlet Valve R&T Dual Flush Outlet Valve
Inclusions Pan, Cistern, Standard Seat, Variance Bend, Installation Instructions
Outlet)
12
(End of pan to Outlet) Pan Set Out 4 5 5 4 5 8 8 0 370 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 8 0 0 FINISHED FLOOR 620 (End of pan to
Pan Set Out 1 8 5 4 5 5 4 5 8 8 0 3 0 90-170 190 115 F I N I S H E D W A L L 370 265 FINISHED FLOOR 375 128 1176860 3 0 6 0 8 0 0 FINISHED FLOOR 135620
Rimless Inwall Toilet Suites
Edge II Rimless Wall Faced Pan & Slim Seat
Product Code 203147
WELS Rating 4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless Trap Type Universal Set Out P-trap set out 185mm S-trap set out 90mm -105mm as standard
Extended S-trap set out 150mm-165mm optional (136002 sold seperately)
Reduced S-trap set out 60-90mm optional (181055 sold separately)
Extended S-trap set out 95-125mm optional (181054 sold separately)
Seat Type Soft close slim seat, quick release metal hinges
Edge II Rimless Wall Faced Pan & Standard Seat
Product Code 203148
WELS Rating 4 Star 3.5L Avg Flush (when paired with 133137 in wall cistern - sold separately)
Material Vitreous China
Rim Type Rimless
Trap Type Universal Set Out P-trap set out 185mm S-trap set out 90mm -105mm as standard
Extended S-trap set out 150mm-165mm optional (136002 sold seperately)
Reduced S-trap set out 60-90mm optional (181055 sold separately)
Extended S-trap set out 95-125mm optional (181054 sold separately)
Seat Type Soft close seat, quick release metal hinges
Cistern
Compatibility Compatible with 133137 in wall cistern (sold separately)
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
Compatibility Compatible with 133137 in wall cistern (sold separately)
Cistern
Inclusions Wall Faced Pan, Slim Seat, Variance Bend, Floor fixing, Installation Instructions.
To see the full Raymor range visit raymor.com.au 15
363 275 FINISHED FLOOR FINISHED FLOOR End of pan to Outlet 560 Pan Set Out F I N I S H E D W A L L 1 8 5 4 0 5 35 90~105 130 363 275 FINISHED FLOOR FINISHED FLOOR End of pan to Outlet 560 Pan Set Out F IN I S HE D W A L L 1 8 5 4 05 35 90 105 130
Cistern
In Wall Cistern
Product Code
WELS Rating 4 Star 3.5L Avg Flush
Material Foam insulated ABS tank Width 480mm Thickness 90mm Height 1140mm Height adjusment range 150mm
Operation Mechanical Compatability Suitable for Raymor Wall Faced Pans 203147, 203148
Inlet Valve Side entry inlet valve (fixed top left water point) Outlet Valve
dual flush outlet valve
Buttons Not included
Inclusions Cistern, Installation instructions
16
133137
4.5/3L
Buttons
Dual Flush Plate, Round, Stainless Steel
Product Code 133599
Material Stainless steel
Finish Brushed Width 236mm Height 152mm Plate thickness 11.5mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
17
Dual Flush Plate, Round, Matte Black
Product Code 153204
Material ABS
Finish Matte Black Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Brushed Nickel
Product Code 275326
Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
18
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Round, Matte Silver
Product Code 285372
Material ABS
Finish Matte Silver
Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Round, Chrome
Product Code 153205
Material ABS
Finish Chrome plated Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 19
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Rectangular, Black
Product Code 275327
Material ABS
Finish Matte Black Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Chrome
Product Code 153203
Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
20
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Rectangular, Matte Silver
Product Code 285373
Material ABS
Finish Matte Silver Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Rectangular, Brushed Nickel
Product Code 275328
Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 21
1 5 2 236 1 0 10 15 3 0 1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Oval, Chrome
Product Code 275329
Material ABS
Finish Chrome Plated Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Brushed Nickel
Product Code 275331
Material ABS
Finish Brushed Nickel Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
22
1 5 2 236 1 0 10 15 3 0
1 5 2 236 1 0 10 15 3 0
Dual Flush Plate, Oval, Black
Product Code 275330
Material ABS
Finish Matte Black Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
Dual Flush Plate, Oval, Matte Silver
Product Code 285374
Material ABS
Finish Matte Silver Width 236mm Height 152mm
Plate thickness 8mm
Operation Mechanical, half and full flush
Compatibility Suitable for installation with In Wall cistern 133137
Inclusions Flush plate, Installation instructions
To see the full Raymor range visit raymor.com.au 23
1 5 2 236 1 0 10 15 3 0 1 5 2 236 1 0 10 15 3 0
24 @Raymorau facebook.com/Raymorau raymor.com.au