Material Safety Data Sheet Parting Paste for Flow-Punch-Forming Art.No. 370ST4810 and 370ST4802 1.
Address of manufacturer / deliverer Centerdrill GmbH Valterweg 19 – D - 65817 Eppstein / Ts. Tel.: +49 (0) 6198 585897 – Fax: +49 (0) 6198 – 585899 info@centerdrill.de – www.centerdrill.de
2.
Chemical Composition Free from sulphur, chlorine and heavy metals. Does not contain any dangerous components (93/112/EWG)
3.
Risks / Hazards No special measures are required if used correctly.
4.
First aid measures Contact with the eyes: Skin contact: If mistakenly swallowed:
Flush eyes with plenty of water. Get medical attention if any irritation develops at all. Clean with water and soap. Do not induce vomiting. Wash mouth and drink plenty of water. Seek medical advice if uneasiness develops.
5.
Fire fighting measures Fire distinguishing agents: N.A. Safety measures for fire fighting: N.A.
6.
Accidental release measures Do not let excessive quantities into the canalization or in water bodies. For the correct disposal fill in suitable container. Clean contaminated patch with water.
7.
Handling and storage Handling:
8.
Avoid contact with eyes. Avoid long lasting contact with skin.
Storage:
Suitable material for container: Stainless steel or plastic. When not in use close container tightly.
Handling:
Follow the usual safety measures for the exposure to chemicals.
Exposure controls / personal protection Does not contain anything for which a limit value is determined Page 1 of 3
Centerdrill GmbH Valterweg 19 D-65817 Eppstein Geschäftsführerin: Julia Bormet
Tel. +49 (0) 61 98 / 58 58 -97 Tel. +49 (0) 61 98 / 58 58 -99 info@centerdrill.de www.centerdrill.de
Bankverbindung: Taunus Sparkasse BLZ: 512 500 00, Kto.-Nr.: 2218402, SWIFT Code: HELADEF1TSK IBAN: DE07512500000002218402
Ust-IdNr.: DE815279852 Amtsgericht: Königstein /Ts. Handelsregister Königstein/Ts. HRB 7941