229 Series Telescoping Gages with one telescoping arm
Telescoping Gages Starrett telescoping gages are used for determining the true size of holes, slots, and recesses up to 6" (150mm) (150mm) . The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter enter . These tools must be slightly “rocked” in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn withdrawn . The final hole size is obtained by measuring over the micrometer . gage contacts with a micrometer
1/2-6" / 13-150mm • Features a handle, one rigid contact arm and one spring-tensioned telescoping contact arm
229 Telescoping Gages Range Inch mm 1/2 – 3/4" 13-19mm 3/4 – 1-1/4" 19-32mm 1-1/4 – 2-1/8" 32-54mm 2-1/8 – 3-1/2" 54-89mm 3-1/2 – 6" 89-150mm 229 Telescoping Gage Sets Description Set of 3, 229A, B, C in Case Set of 5, 229A, B, C, D, E in Case
Handle Length Inch mm
2-3/8"
60mm
3-1/4"
82mm
Catalog No . 229A 229B 229C 229D 229E
EDP 50923 50924 50925 50926 50927
Catalog No . S229FZ S229GZ
EDP 50928 50929
Handles can be individually ordered and/or ordered in larger sizes such as 8", 12" or longer, similar to 579 Series listing, upon request .
579 Telescoping Gages Range Inch mm 5/16 – 1/2"
8-13mm
1/2 – 3/4"
13-19mm
3/4 – 1-1/4"
19-32mm
1-1/4 – 2-1/8"
32-54mm
2-1/8 – 3-1/2"
54-89mm
3-1/2 – 6"
89-150mm
Handle Length Inch mm 2-3/8" 60mm 8" 200mm 12" 300mm 2-3/8" 60mm 8" 200mm 12" 300mm 2-3/8" 60mm 8" 200mm 12" 300mm 2-3/8" 60mm 8" 200mm 12" 300mm 2-3/8" 60mm 8" 200mm 12" 300mm 3-1/4" 82mm 8" 200mm 12" 300mm
Catalog No . 579A 579A-8 579A-12 579B 579B-8 579B-12 579C 579C-8 579C-12 579D 579D-8 579D-12 579E 579E-8 579E-12 579F 579F-8 579F-12
EDP 52610 63192 63195 52611 63193 63196 52612 63194 63197 52613 67114 63198 52614 67115 63199 52615 67116 63200
Handles can be individually ordered . Handles longer than 12" (300mm) are available on special order .
302