Tt magazine issue11

ISSUE 11 • MARCH / APRIL 2015

!NLINE I5N W 0O A EIVE IRST

F EC THE LL R T BAIT I W OF ERS ORD CHOMP S SET FREE IG HOOK 2 &J E PAG TAILS SEE E D E MOR FOR

THE TRADE MAGAZINE

BY ENGINEERS FOR ENGINEERS A LOOK AT WHAT’S INSIDE

MASSIVE

R TOOL POWED E - IN TRA

PAGE

4

Valid from 1 March 2015 to 30 April 2015. While stocks last.

PAGE

3

PAGE

5

PAGE

2

TRADETOOLS We hope you all had a happy festive season and the year ahead is full of promise and opportunity for your businesses or any personal projects. Whatever it is that lies ahead in 2015 we want you to know that we are here to help and that our offering goes far beyond the product in this magazine.

2) Product We have always taken the view of a better and best product strategy, this means we leave the cheap and nasty product to others so we can focus on the customers whose quality standards demand getting it right. This is backed up with the most extensive on the shelf range of cutting tools, machine lubricants, measuring, abrasives and hand and power tools available under one roof in NZ.

3) On-line As much as we like to visit you or help on the phone we realised a few years back the internet was a must in the modern world.

Our www.tradetools.co.nz web site is the best in NZ, we know this from the feedback and significant growth the site has each month.

Talk to us about buying on your account on-line through our store, not only do we send all items FREIGHT FREE that are purchased on line but our resource centre and product catalogue make selection easy.

1) People We have a network of Trade qualified people both in the field and internally to help provide solutions and advice around your Tooling needs.

Our people are all extensively trained and very technically savvy on our core product range to ensure that what we recommend leads to process and performance improvements and ultimately cost reduction.

This will be our 60th year, through all this time we have remained a privately owned NZ company committed to investment in people and technology to keep our reputation with all our customers. Our customer base is as vast as our product range, so there is no problem we haven’t seen or area we can’t assist with.

Contact mark@tradetools.co.nz to tell us about it – from shed based rebuild projects through to multi-million dollar ventures; if there’s great engineering going on, we would love to hear about it!

KEY STEEL COMBO High Quality Bell brand precision ground 300mm lengths of square Key stock ground to very high tolerances, perfectly straight.

Conveniently packed into the most commonly called for sizes as a combo!

Contains one each of 1/8”, 3/16”, ¼”, 5/16”, 3/8”, ½”, 5/8”

$

49.95

W0000338

3

METRIC PACK

Contains one of each of 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm

$

There are many other reasons to use us in 2015, whatever your needs may be, give us a call as we are better placed than we have ever been to see you right in the year ahead.

The first 50 online orders will receive a free Chomp soft bait & jig hook set This month Trade Tools will be giving a fish bait set (hooks and jigs) to the 1st fifty people who order any product from this magazine on-line. No need to do anything other than order, we will simply send them with your order, then you can get fishing.

We would love to publish some pictures of some big fish caught in our next magazine, so please e-mail us (sales@tradetools.co.nz) with your best snaps. *the book pictured is the US Edition we will be selling the NZ & Australia edition

ELECTRICAL BLACK BOOK 1ST EDITION • 210 Full Colour Pages with images • Grease / Tear Proof • Pocket Sized • Layflat format

$

89

FREE

.95

POCKET DIGITAL

8600155

MULTIMETER worth

W0000339

OVER

F F O 0%

0-25mm/ 0-1" 3109-25A INSIZE • Resolution 0 1mm/0 005" • Button function: on/off, set, mm/inch, ABS/INC • SR44 or LR44 battery, automatic power off • Carbide measuring faces, Ratchet Thimble, and supplied with spherical anvil

65

4912480

$25.95 Topics Include:

• Electrical Safety • Laws of Electricity • Electrical Enclosures • Electrical Conductors • Transformers & Motors • Electrical Codes & Standards • Electrical Socket-Outlets & Switches • Electrical Conduit & Conduit Bending • Electrical Formulae & Conversion Factors

250PCE HIGH TENSILE METRIC ZP SET SCREW ASSORTMENT

A selection of M6 - M10 zinc plated bolts, nuts, nyloc nuts, flat and spring washers.

IDEAL FIELD SERVICE KIT

$

99

W0000388

2

Trade Tools is everywhere you need us to be, we have 19 qualified sales representatives covering NZ, our online store is open 24/7 and we operate four retail stores in NZ’s main centres.

Our global supply network is extensive which means that we can get you what you want when you need it.

44.95

MICROMETER EXT DIGITAL

$

5) Coverage

4) Experience

Do you work for a business that has something to crow about?

IMPERIAL PACK

Our future is dependent on our ability to grow with our customer’s needs, our commitment to this has remained unchanged for 60 years.

Order Online at www.tradetools.co.nz

STAINLESS TAPE MEASURE

All metallic components are stainless steel for just resistance, class II Accuracy printed blade, nylon coated blade, positive lock holds blade firmly, rubberised case and button.

5 METRE

8 METRE

4928540

4928760

19

$

.95

We accept

$

35

$

24.11 2837576

TOPTUL GCAI150R

AROLUBE LEVER GUN C/W BONUS 300MM EXTENSION

150PCE Trade Quality Toolkit in Blow moulded case size: W580 x D412 x H120MM

• Suits 450Gm cartridge • HD 4 Jaw coupler • Up to 8000psi

AROLUBE TRIGGER GUN C/W BONUS 450MM EXTENSION $ .69

29

• Suits 450Gm cartridge • HD 4 Jaw coupler 2837676 • Up to 6000psi

TMX ROAD BOX

5 Drawer Heavy Duty Toolbox Dimensions: (LxDxH) 910mm x 505mm x 665mm Net Weight: 65kg Combined Drawer Capacity: 475kg Coated Low Friction Slides, Sling it, Chain it or Fork it with built in Grab Points.

$

• 1/4” & 1/2” Drive Metre Sockets • Accessories Standard and Deep • Punch Set • Screw Driver Bits • Torx Bits • E-Torx Sockets • Wrenches • Hammer • Locking Pliers • Screw Drivers • Pilers • Hex Key Set

NEW T OT RANG HE E $

399 3805965

739

W0000385

READY FOR WORK ON THE BACK OF ANY VEHICLE !!

1/2”DR SOCKET SET

43PC COMBINATION MET/AF The TOPTUL GCAD4303 1/2” drive professional socket set comes in a metal case contains the following 43 pieces: • 20 x SOCKETS - 1/2” FLANK DRIVE (6 PNT) 8, 10, 11, 12, 13, 14, 15, 16, 17, 18,19, 21, 22, 23, 24, 26, 27, 29, 30, 32mm • 14 x SOCKETS - 1/2” FLANK DRIVE (6 PNT) 3/8”, 7/16”, 1/2”, 9/16, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4” • 2 x SPARK PLUG SOCKETS - 1/2” DRIVE 16 and 21mm • 1 x RATCHET - 36 TEETH REVERSIBLE WITH QUICK RELEASE - 270mm • 3 X EXTENSION BARS - 75mm, 125mm and 250mm • 1 x UNIVERSAL JOINT

$

WAS

NOW

310 199 $

3806100

TOPTUL PIPE WRENCHES

CAST IRON BODY,CHROME MOLEBDENUM JAWS 3813600 PIPE WRENCH 200MM $19.95 3813610 PIPE WRENCH 250MM $26.50

TOPTUL ADJUSTABLE WRENCHES

3800802 WRENCH ADJ 150MM 3800804 WRENCH ADJ 200MM 3800806 WRENCH ADJ 250MM 3800808 WRENCH ADJ 300MM 3800810 WRENCH ADJ 375MM 3800812 WRENCH ADJ 450MM

All prices exclude GST

$18 $23 $29 $36 $65 $118

3813620 PIPE WRENCH 300MM $31.50

3813630 PIPE WRENCH 350MM $38.50 3813640 PIPE WRENCH 450MM $54.60 3813650 PIPE WRENCH 600MM $84 3813660 PIPE WRENCH 900MM $165.20 3813670 PIPE WRENCH 1200MM $297.50

Phone in your order: 0800 4 TOOLS

3

Hitachi 6MM Variable Speed Grinder

Hitachi 230MM Heavy Duty Angle Grinder • Heat resistant 2000w motor • Strong alloy gearbox with spindle lock • 3-position side handle • Easy to operate trigger switch

$

286

Hitachi 230MM Industrial Angle Grinder

.25

G23SR

• 2400W motor with high overload durability • Super tough alloy outer casting with double- insulated polycarbonate inner layer • Easy to operate trigger switch • 3 position anti-vibration side handle • Tool-less guard adjustment • Low profile head for access into confined areas • Auto -stop brushes and anti- dust airflow for maximum motor protection

E RAD T HT S WIT AY JU IN P

$

219

$

• High powered 790W unit for timber and steel drilling • 13mm keyed chuck • Synchronised 2-speed gearbox • Variable speed and reverse • Built-in safety clutch • Supplied with depth stopper and side handle

336.25

D13VB3

$

242

$

E RAD T HT S WIT AY JU IN P

$

329

$

373.75

DV20VB2

E RAD T HT S WIT AY JU IN P

236.25

$

DV18V

Hitachi High Torque Drill • 800W motor • Heavy duty 13mm keyed chuck • Triple reduction gearbox gives maximum speed of 600rpm and a high torque output of 74Nm • The perfect drill for electricians and plumbers who need to drill large holes for wiring or plumbing E • Variable speed and reverse for RAD H T UST T I maximum convenience W AY J IN P • Supplied with an extended side handle and carry case • Optional 2-speed right-angle drill attachment available, to allow drilling in tight spaces

$

$

319

389

• 20mm capacity in concrete • 13mm steel-cased keyless chuck • Powerful 790W motor • Synchronised 2-speed gearbox • Quick ‘impact’ - ‘non-impact’ switching • Convenient variable speed and reverse • Supplied in robust carry case with side handle and depth stopper

Hitachi 18MM Impact Drill

$

461.25

GP3V

Hitachi 20mm Impact Drill

E RAD T HT S WIT AY JU IN P

• Quick “impact” - “non impact” switching • 2-speed gearbox plus reverse • Variable speed by trigger and dial • 13mm keyed chuck • Powerful 690w motor • Tough alloy gearbox

E RAD H T UST T I W AY J IN P

$

386.25

G23MR

Hitachi 2-speed General Purpose Drill

$

• Heavy duty industrial unit • High speed model for small grinding wheels and specialist applications • Super powerful 760w motor • Variable speed range 7,000 - 29,000 rpm • Soft start and constant speed control • Easy to grip slim body - only 200mm circumference

292

E RAD H T UST T I J W AY IN P

$

179

Hitachi High Speed Drill • 10mm keyed chuck • 460W motor • Variable speed and reverse • Maximum no-load speed of 2300rpm – perfect for pilot holes, rivet holes, etc.

• Compact and lightweight unit • Anti-slip rubberised housing

$

148

D10VC2

.75

E RAD H T UST T I W AY J IN P

$

373.75

98

D13VG

TRADE IN ANY OLD POWER TOOL AND SAVE BIG $$$$ 4

Order Online at www.tradetools.co.nz

We accept

ABS DIGIMATIC CALIPERS The ABS (absolute) scale requires no origin setting after power-on and also has no limit to response speed.

The slider provides smooth, stable and comfortable operation.

New-series Digimatic calipers born from Mitutoyo’s technologies accumulated for 30 years since development of digital calipers. Equipped with the same electromagnetic induction type absolute encoder as applied for ABS coolant-proof calipers.

• A battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo’s ABSOLUTE scale.

• The slider configuration features an ergonomic, thumb-friendly shape.

• Step-measurement capable.

WHILE STOCKS LAST!!!

0-150MM

$

169

500-196-30

Thanks to the adoption of the electromagnetic induction type ABS encoder, this caliper can be used without concern for contamination on the scale face during measurement.

0-200MM

$

199

500-197-30

• INC (incremental) measurement function • Low battery alarm • Maximum response speed: Unlimited

All prices exclude GST

Phone in your order: 0800 4 TOOLS

5

TRADEQUIP ENGINE CRANE

20T AIR HYDRAULIC BOTTLE JACK • Hydraulic Lift = 160MM

• Working Pressure = 90-120PSI • Adjustable Height = 85MM • Minimum Height = 265MM • Maximum Height = 510MM • Net Weight = 16.3kg • 20T Capacity

$

FREE

500kg

Engine Stand valued at $200

199

with every Engine Crane purchased

W0000387

• 2 Ton Foldable Engine Crane • 1000kg safe working capacity • Adjustable Boom 250kg, 500kg, 750kg, 1000kg

• 8 TON Long Stroke Lifting Ram,

Lifting Range 600 to 1740MM (from bottom edge of the main boom)

• Over Load protection • Overall Dimensions (Arms

Extended) = 1690MM L x 1028MM W x 1565MM H

$

499

W0000386

ARBOR PRESSES • Cast Iron • Adjustable handle • 4x 90 degree Slotted Round Table

PULL BACK RAM 10000kg Pullback Ram complete with hooks.

Minimum Height = 570MM Maximum Height 700MM.

PRESS 0.5 TON WAS $120, NOW

$

89

W0000371 PRESS 2 TON

$

PRESS 1 TON

WAS $150, NOW

$

109

99

W0000389

W0000382

WAS $360, NOW

$

235

W0000383

PRESS 3 TON

WAS $480, NOW

$

355

W0000384

KINCROME SAFECASE

PRIZE WINNER In issue 9 we gave one lucky customer the chance to win $1,000 worth of Facom Tools.

A big congratulations goes out to Global Engineering in Kumeu who won this competition.

Manufactured from ultra high impact structural polymer, water tight, vibration and shock proof, dust proof, stackable, chemical resistant, super strong latches, fully lockable. Suitable for photographic and electronic equipment.

K51011 SMALL

W210 x D167 x H90MM

$

30.72

W0000367

NNER

K51011 MEDIUM

WI THE

$

61.42 W0000368

K51012 LARGE

in

W430 x D380 x H154MM

$

98

IS...

BAL GLO RING INEE ENG Kumeu

W330 x D280 x H120MM

.97

W0000369

K51012 EXTRA LARGE W515 x D415 x H200MM

$

133.09 W0000370

6

Order Online at www.tradetools.co.nz

This month we are giving away Chomp soft bait & jig hook sets. SEE DETAILS ON PAGE 2.

We accept

DIXBRO WIRE WHEELS Crimped Bench grinder wheel brushes, roughing for adhesion, finishing for appearance, general cleaning of paint, rust etc, edge blending, deburring.

W150x19MM

$

1022280

F F O % S 0

3HPH AB

Reinfo

OX rced IN

W200x19MM

$

41.90 1022325

tes.

RASIVEcompetitive ra

indin , DC gr cutting

26.12

RY g at VE

!

S BONU

150 MM 0r 200MM, 30G Brushworks Wire Wheel

With every Dixbro Wheel Purchased

110PC METRIC TAP & DIE SET An ideal maintenance set manufactured from Tungsten Alloy Steel M2 thru M18 in ISO Std, Fine & Ext Fine.

Contains: 35 x Taper & 35 x Plug Taps 35 x Button Dies 1 x T-type Tap Wrench 2 x Bar Pattern Tap Wrenches 1 x 25mm OD Die Holder 1 x 38mm OD Die Holder

GET THE LOT!

$

249

W0000171

SUTTON HAND TAP SETS Set of 3, includes: Taper, Intermediate & Bottom

WAS $391, NOW

$

269 6620270

6570210 6570260 6570320 6570380 6570440 6570530 6570610

Sutton M3 hand tap set Sutton M4 hand tap set Sutton M5 hand tap set Sutton M6 hand tap set Sutton M8 hand taps set Sutton M10 hand tap set Sutton M12 hand tap set

$33 $30 $32 $33 $35 $45 $65

119

$

2120460

Using the latest in engineering design and grinding capabilities, the new Series 33. High Performance End Mills handle slotting of difficult materials such as Stainless Steel, Titanium, and Inconel. Ideal for applications struggling with chip evacuation, this 3-Flute design offers increased chip clearance and a reduction in harmonics.

5134900 SERIES 33 3 FLUTE END MILL 3MM

$35.17

5134920 SERIES 33 3 FLUTE END MILL 4MM

$35.17

5134940 SERIES 33 3 FLUTE END MILL 5MM

$35.17

5134960 SERIES 33 3 FLUTE END MILL 6MM

$35.17

5134980 SERIES 33 3 FLUTE END MILL 8MM

$44.05

5135000 SERIES 33 3 FLUTE END MILL 10MM

$64.78

5135020 SERIES 33 3 FLUTE END MILL 12MM

$92.47

5135040 SERIES 33 3 FLUTE END MILL 16MM

$169.76

5135060 SERIES 33 3 FLUTE END MILL 20MM

$326

All prices exclude GST

Phone in your order: 0800 4 TOOLS

7

NEW ZEALAND’S MOST POPULAR ANGLE GRINDER!!

A PROVEN WORKHORSE!!

• G13SB3 • 1300W • Low Profile Head • Sleek Body • 125mm

$

179

WEPBA 17-125Q GRINDER 125mm 1700W Marathon Motor,Safety Clutch,Quick Nut Easy Disc Change - No Tools Required, Auto Balancer, Soft Start, Anti Vibration Handle, Restart Protection, Brake, Deadman Paddle, and Auto Stop Carbon Brushes.

3326200

$

Super Special Price

3332340

WORLD FIRST!!!

INSIZE THICKNESS GAUGE 2364-10

MAGNETIC SOCKET RAIL

• 0-10MM

• Portable Socket Holder

WAS

94.50

$

• Anodized Aluminum Rail • Construction Super Strong Magnet for solid placement

HIGH QUALITY MEASURING AT GREAT PRICING

• Holds both STD and Deep Sockets • Removable Fasteners

1/4 DRIVE

$

535

33.75

NOW

66.15

$

4827900

3804130

3/8 DRIVE

$

33

.75

DIAL DEPTH GAUGE 0-10MM X 0.01 MM 63MM BASE 2341-101A

1205-1502S CALIPER

3804140

• 150mm/6”, Metric / Imperial Scale WAS $69, NOW • Graduation 0.02MM/0 1” • Made of stainless steel $ • Accuracy +/- 0.03MM 4826260

49

1/2 DRIVE

$

33.75 3804150

1205-2002S CALIPER

• 200MM/8”, Metric / Imperial Scale WAS $76, NOW • Graduation 0.02MM/0 1” $ .20 • Made of stainless steel 4826460

53

25MM DOC ANNULAR CUTTER KIT

14-22mm, 5pc KIT WAS $366, NOW

256

$

2640450

NEW MODEL 1599

HOUGEN ROTACUT SHEET METAL CUTTER SETS

$

2645160

Sizes 8-20mm

HMD914SC MAGNET DRILL 350 RPM

12-52 MM Cap. With 76MM Doc, Swivel Base, New Housing with New Ergonomic Handle and Lighter Weight, Powerful High Torque motor and Gears, Positive Slug Ejection

8

Order Online at www.tradetools.co.nz

115

$

2633100

• 0-10MM • 63MM Stainless Steel base • Supplied with pointed Tip and Ball Tip

WAS

109 $76.30 $

4840820

HMD904S MAGNETIC DRILL 450 RPM The drill of choice for fabrication. Lightweight, compact, powerful, & versatile.

• Large 38mm Ø x 50mm depth of cut capacity • Positive slug ejection • Feed handles quickly change from side to side • Lift detector safety system • Gravity feed coolant system • One stroke lock and unlock handle • Great for horizontal, overhead, tight areas,and getting out over another piece of steel

904S (SWIVEL BASE)

1199

$

2645140

We accept

NOGA RAPID BURR RB1000

WEV 15-125Q INOX GRINDER 1550W Marathon Motor, Safety Clutch Quick Nut Easy Disc Change - No Tools Required, Anti Vibration Handle,Tc Electronics,Soft Start, Restart Protection, and Auto Stop Carbon Brushes.

12mm hexagonal painted handle and S10 Blade. Steel housing for long life of handle.

Blade is replaceable.

PERF ECT LOCA HOLE TION

$

1840490

NOGA PROMO SET Best value on offer here! Includes 10 blades - tool will take all common blades.

SUTTON SPOTTING DRILL SET

$

439 3332320

NEW MODEL NOGA DE-BURRING TOOL SPARE BLADE 10PC PACK SPECIALS NOGA Deburring system, the acknowledged world leader in hand Deburring system/tool, constantly invests in quality product innovations. NOGA’s stated aim is to offer their customers the most competitive and best solutions. Blades made of H.S.S. Hardness 62-64RC.

12.50

Accurate positioning and perfect hole location • Precision drill for machine use • Rigid design for ‘seat’ position accuracy • 90 degree offers hole chamfering and spotting with the one tool WAS $188.05 , NOW • Made from HSS Co. • TiN coated $ • Precise point geometry 2526220 • Sizes 6,8,10, 12 & 16mm

$

23

1840430

149

S35 (10PC) 1841200 Works best on straight edges on most materials.

S150 (10PC) 1841160

S10 (10PC) 1841110

Works best on holes as small as 1.5mm Diameter.

Works best on steel, aluminum and plastic.

Per 10pc Pack

22

$

25

%

BACHO FILE SET

8” engineers handled file set

OF

F

Contains: • 1 x flat bastard • 1 x flat 2nd cut • 1 x round • 1 x half round • 1 x square • 1 x pvc wallet.

WAS $74.95, NOW

55

$

6037100

TAPMATIC self reversing tapping attachments with rubber-flex collet chuck.

For manually operated drilling and milling machines. Since 1952 Tapmatic has manufactured the world’s most popular line of compact self-reversing tapping attachments. Although there are other products available on the market, a Tapmatic head is still the most economical to use. Our customers know they can count on our tools for many, many years of service. Tapmatic offers a complete program of self-reversing tapping attachments to meet the most difficult requirements.

Ruggedly built, these Tapmatic tools provide higher production rates due to: • decrease in tap breakage • reduced cycle time through 1.75 x 1 Increased Reverse Speed USA Manufactured TAPMATIC features an incomparable range of true performance enhancing advantages: • Increased Production • New Durable Rugged Design • New Heavy Duty Ball Clutch.

• Pre-Selective Torque Drive • Self Feed ensures gage perfect threads.

• Re-Entry Cushion eliminates cross threading.

• J6 mounting for RX30 & 50, J3 mounting for 70X, J4 for 90X makes it suitable for any arbor to be fitted.

RX30 JT6 M1.4-M7 TAPPING ATTACHMENT (w/o Collets)

645

$

6522100

RX50 JT6 M3-M12 TAPPING ATTACHMENT (w/o Collets)

KEEP YOUR BLADE CLEAN FOR OPTIMUM PERFORMANCE !!

855

$

6522120

70X JT3 M5-M18 TAPPING ATTACHMENT (w/o Collets)

1150

$

6522140

90X JT4 M10-M30 TAPPING ATTACHMENT (w/o Collets)

1695

$

CHIP BRUSHES

80 X 8mm 100 X 12mm

31

$

1022230

39

$

1022240

Used to clean the gullet from a bandsaw blade and are vital for optimum performance

6522160

“A FULL RANGE OF COLLETS ARE STOCKED AND AVAILABLE ON REQUEST FROM $65”

All prices exclude GST

Phone in your order: 0800 4 TOOLS

9

off ge % 25 Ran tire n E EVACUT 1/2” REDUCED SHANK DRILLS Sizes: 33/64” - 1.1/4” and 13.5mm to 32.0mm

WALTER DEBURRING CUTTERS

• Forward & Reverse Deburring • Dia Range 6-12mm • No of Teeth – 4+6 • Shank DIN 6535 HA

5146100 Walter Prototyp Fwd/Back Deburrer 6mm 5146110 Walter Prototyp Fwd/Back Deburrer 8mm 5146120 Walter Prototyp Fwd/Back Deburrer 10mm 5146130 Walter Prototyp Fwd/Back Deburrer 12mm

$124 $162 $179 $226

CIMDRAULIC® 32/46/68/150

RUKO STEP DRILLS

Made from high-speed tool steel. These robust tools can be centred, drill in and out and de-burr in one motion.

The deep-cut grooves of the stepped bit offer a clean drive and great cutting performance.

4-20mm x2mm

53.90

$

2429220

4-30mm x 2mm

88

$

2429250

High Performance Hydraulic Oil Premium grade hydraulic oil designed for industrial hydraulic systems and fluid power transmission systems.

Features & Benefits • Thermal stability – Resistant to degradation and sludge formation improving system reliability and cleanliness • Oxidation resistant – Extending fluid life and oil drain intervals, providing overall savings in fluid costs and waste oil disposal • Outstanding anti-wear properties – Extends the life of pump and system components, reducing downtime and saving costs on replacement parts • Excellent water separation – resists the formation of emulsions, thus preventing hydraulic system and pump damage • Multi metal compatibility – Protects ferrous and non ferrous system components from corrosion• Low foaming – helps to minimize system cavitation to provide constant pressure transmission ALL GRADES AVAILABLE IN 20 & 205L DRUMS

6-38mm x 2mm

139

$

30% OFF

2429260

CIMGLIDE SLIDEWAY OIL

CIMGLIDE® 68 is a specially formulated MACHINE TOOL lubricant for all horizontal slideways.

Meeting the Cincinnati Machine P47 Specification, it combines mineral oil and extreme pressure additives to assist in eliminating stick-slip to ensure machines run at their optimal performance.

Suitable for use in the following machine tool applications: • Horizontal slideways Feed mechanisms • Tables, Gear boxes & Hydraulic systems • CIMGLIDE® 68 is designed for minimal impact on water based metalworking fluids.

Available in the following sizes: 2831295 Cimglide Slideway 5L 2831300 Cimglide Slideway 20L 2831310 Cimglide Slideway 200L

$32 $105 $800

ALL CIMDRAULIC OILS

COMPARE OUR PRICING COMPARE THE RESULTS! MINERAL - CIMPERIAL 1070

SEMI SYNTHETIC – CIMSTAR 70HFP

SYNTHETIC – CIMTEC C205

Soluble metalworking fluid recommended for a wide variety of heavy duty machining and grinding operations “one fluid for all operations” Suits both individual machine sumps and central system applications.

Recommended for High Fluid Pressure and High Volume. Flow Applications where minimization of foam is critical. It can be used for machining and grinding operations of ferrous and some non-ferrous materials, chlorine free.

Extremely low foaming, clear biostable synthetic for central systems and individual machines. Well suited for applications where foam and ferrous corrosion control are critical. Very resistant to attack by mould and bacteria. Excellent settling properties allowing the mix to remain clean.

Exceptional tramp oil rejection.

Metals: Carbon Steels, High Speed Steel, Cast Steels, Alloy Steels, Tool Steel, Stainless Steel, Cast Iron, Aluminum, Bronze, Brass & Copper Metals.

Duty Range: For moderate to heavy-duty operations.

2831100 Cimperial 1070 - 5L $65 2831110 Cimperial 1070 - 20L $220 2831130 Cimperial 1070 - 200L $1700

10

Order Online at www.tradetools.co.nz

Metals: Most Aluminum Alloys, Cast Iron, Nodular Iron, Carbon Steels, High Speed Steels, High Alloy Steels, Stainless Steels, Most Non-Ferrous Alloys Duty Range: For moderate to heavy-duty operations

2831170 Cimstar 70HFP - 5L $55 2831180 Cimstar 70HFP - 20L $185 2831190 Cimstar 70HFP - 200L $1500

Metals: Cast Iron, Nodular Iron, Carbon Steels, Ferrous metals Duty Range: Moderate to some heavy-duty.

2830960 Cimtec C205 - 5L $39 2830980 Cimtec C205 - 20L $120 2831000 Cimtec C205 - 200L $950

We accept

SOLAR “T” BLOCK HOLDERS Blocks for 150.10a20 blade,block with loose clamp.

12MM “T” BLOCK WAS $87.03, NOW

$

61.40

WAS $87.03, NOW

$

4227100

61.40

4227140

20MM “T” BLOCK

WAS $87.03, NOW

$

16MM “T” BLOCK

61.40

4321220 4321234 4321235 4321250 4321284 4321290 4321330

R217.69-1616.0-10-2A R217.69-1820.0-10-2A R217.69-1820.0-12-2AN R217.69-2020.0-10-3A R217.69-2225.0-10-3A R217.69-2525.0-10-3A R217.69-3232.0-10-3A

$338.06 $349.96 $349.96 $369.59 $389.16 $389.16 $401.06

SECO TURBO 10 CUTTERS

For light duty, high precision applications, Seco Turbo 10 is the answer. The free cutting, low power consumption design makes it ideal for smaller machines and setups that lack stability. Like all Turbos, these cutters are constructed of hardened steel cutter bodies for strength & rigidity. Diameter range available 16-100 mm.

INSERTS

4132240 4133280 4133320 4133440 4133520 4133440

25MM “T” BLOCK WAS $118.59, NOW

$

4227180

TURBO 10 MILLING CUTTER

83.00

4227220

XOEX10T308FR-E05 H15 (Steel) XOMX10T304TR-ME07 MP2500 XOMX10T304TR-ME07 F40M XOMX10T308TR-ME07 F40M (S/steel) XOMX10T308TR-M09 MP2500 (Ali) XOMX10T308TR-M09 F40M

$19.95 $17.43 $17.22 $17.22 $17.43 $17.22

30%

SAVING

6 40 RICO THREAD FILE SET

• Thread File Sizes: File 1: 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0 Pitch File 2: 11, 12, 13, 14,16, 18, 20, 24 tpi File 3: 3, 9, 10, 12, 16, 20, 27, 28, 32 tpi • Thread Pitch gauges – SAE & Metric

75.00

$

3033580

WAS 107.87 THATS OVER

30% OFF 222 LOW STRENGTH FOR SMALL FASTENERS.

243 THREADLOCKER OIL RESISTANT/MEDIUM STRENGTH

263 THREADLOCKER MEDIUM TO HIGH STRENGTH.

2828140 10ml $14.41 2828150 50ml $44.59

2828170 10ml $14.33 2828180 50ml $44.51

2828210 10ml $14.30 2828220 50ml $45.14

Recommended for low-strength threadlocking of adjusting screws, countersunk head screws and set screws.

All prices exclude GST

A general purpose, medium strength threadlocker with improved oil tolerance.

For fasteners between 6 to 20 mm diameters.

A permanent threadlocker for fasteners up to 20 mm diameter. High lubrication for easy assembly. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.

Phone in your order: 0800 4 TOOLS

11

SOLID CARBIDE TOOLING We get many enquiries about the range of Solid Carbide Tooling available and when you should use Solid Carbide Tools in preference to HSS Tools. Questions regarding their suitability for machining different types of materials and machines are common. This month I will review a few of the Solid Carbide Cutters available now and their applications.

Q. Are Carbide Cutters only for High Tech Machines?

Q. What are the main requirements for using Solid Carbide Tooling?

Q. Can Solid Carbide Cutters only be used for Finishing Cuts?

A. One of the main requirements when using Solid Carbide Tools is a solid setup.

This applies to both the machine and your workpiece. Because of the Hardness of Carbide it does not tolerate vibration very well. Weak workpiece setup or poor machine conditions will cause the Carbide Tools to fail.

Toolholders with adequate gripping pressure are also required.

A. Whilst Solid Carbide Cutters are very good for finishing they can also be used for roughing cuts. Some cutters like the SGS “Z Carb” have an Unequal Helix Geometry which reduces the chance of vibration, and so increases performance and tool life.

Q. What Cutting Speeds do you need for Solid Carbide Tools?

A. Although you can run Carbide Tools at low speeds to obtain maximum tool life and performance, Solid Carbide cutters can be run at three to four times the speeds you would use for HSS. With some of the coatings now available the cutting speeds can be seven or eight times faster. Although the feed per tooth remains much the same, your table feed is greatly increased because of the higher RPM table read.

Example: To cut a 10mm wide by 5mm deep slot in 4140 Steel using 3 Flute cutters. HSS Uncoated Cutter – 11m/min (350 rpm) @ .041mm/tooth (43mm/min table feed) Carbide TiCN Cutter – 82m/min (2600 rpm) @ .043mm/tooth (335mm/min table feed).

A. No. Solid Carbide cutters are available in many different types, from standard 2, 3 or 4 flute Uncoated Slot Drills and End Mills which can be used on any machine, through to the more complex cutters designed for use on CNC Machines.

This type of cutter is a very good option for both roughing and finishing. These types of cutters are also available with a corner radius or chamfer to provide a stronger cutting edge.

Q. What materials can you machine with Solid Carbide Cutters?

A. The range of materials is really unlimited.

Cutters are available with different tooth geometry and coatings to machine from Free Cutting Steel through to Difficult Stainless Steels, Hardened Die Steels up to 65HRc, Titanium Alloys and Nickel. There is also a range specifically designed to machine Aluminium and Plastics.

Q. How do the cutters for Aluminium differ from the standard ones?

A. Cutters for Aluminium and Plastics have a very sharp cutting edge and an open flute design. These features, when combined with a 45o high helix flute angle (which increases

the effective cutting rake angle without reducing edge strength), provide excellent chip evacuation, therefore allowing much higher cutting speeds and feed rates. Cutters such as the SGS SKI-CARB® can operate at up to 50,000 rpm with 12.7 m/min feed rate.

Q. What cutters should I use for Hardened Tool Steel?

A. As I mentioned earlier we can provide cutters to machine up to 65HRc. These cutters are generally made from specially engineered carbide which offers maximum hardness and fracture resistance. These cutters feature extreme negative radial rake which signifi cantly increases edge strength. The cutters also feature multiple cutting edges to increase rigidity and feed rate capabilities, while a high helix angle (45o or 50o) increases shearing ability without reducing edge strength. The combination of these features improves surface finishes by reducing cutter deflection and maintaining a more constant cutter to workpiece contact. Depending on the coating, these cutters can often be run without coolant.

Q. What is the advantage of running these cutters on 65HRc toolsteel without coolant?

A. The elimination of flood coolant often improves tool life. Milling in hardened steel generates extremely high temperatures and the rapid quenching of flood coolant can cause thermal shock, which reduces tool life. Semi cooling or chip removal by Air and Oil blast stabilizes the tool temperature. This can only be performed when your tool is coated with an effective heat resistant coating.

TOPTUL 186PC PRO 9 DRAWER TOOL KIT

• 1/4”, 3/8” & ½” DR Comb Met & AF sockets & accessories • 15º Offset Standard Combination Wrenches 6-24mm & ¼” – 1” • Adjustable Wrenches 200 & 250mm • Locking Plier Curved Jaw 250mm • 90º & Straight Circlip Pliers (Int & Ext) • Linesman, Diagonal, L/Nose & Water Pump Pliers • Flat. Phillips pozi & Square Screwdrivers • 1/2” Dr Impact Driver • Quick Change Bit Holder 1/2” Dr x 5/16” FL, PH & PZ Insert Bits • Long Ball Point Hex Key Wrench Sets Met & Imp • Pin Punch Set • 24oz Ball Pein Hammer • Heavy Duty Hacksaw 12”

186 PC

1099

$

3811115

0800 4 TOOLS •

www.tradetools.co.nz

DISCLAIMER: We are a fair minded company and try to exceed the requirements of fair trading legislation in NZ. All Prices exclude GST and are current at the time of publication.

Stocks however may not always be available, but we can generally offer a substitute if you contact us to discuss. Errors and omissions can happen too; the images printed are sometimes generic (and may in the odd case be completely incorrect). Once again if it looks wrong or too good to be true, contact us so we can set the record straight!