TradeZone Caliper Vol191 Apr / May 2023

MACHINE PRIZE BONANZA

MAJOR MACHINE PRIZE PACKAGES 3

1st Prize: RAZORWELD MIG230 4in1

MIG/TIG ACDC/MMA WELDER PACKAGE

C/w XA24 MIG Torch x 4m

ARC T3FX Tig Torch x 4m & Spares

Earth Lead, Arc Lead, Regulator

2nd Prize:

VIPER TIG 180AC/DC WELDER PACKAGE

C/w XA 26FX Tig Torch x 4m & Spares

Earth Lead, Arc Lead, Regulator

3rd Prize: VIPER CUT 30 PLASMA CUTTER PACKAGE

C/w XA-SC40 Plasma Torch x 4m

Earth Lead & Plasma Spares

LET THERE BE LIGHT AND THERE WAS LIGHT

Using LIGHT through optical amplification is an emerging welding technology that is much more efficient and precise than MIG/TIG.

Introducing the Xcel-Arc X1 HAND HELD LASER, the smallest and lightest laser welder in the world. Up to 10 x faster than manual TIG.

Producing faster welding speeds, high weld strength, small heat affected zone, weld different materials and different thickness with high quality. It delivers excellent welding results with much less run costs compared to manual MIG/TIG welding.

As the challenges of metal fabrication industries grow, this new technology can significantly improve fabricators’ efficiency and profitability in a competitive landscape where fast project delivery and effective cost control are vital.

• FAST WELD SPEED

• LESS DISTORTION

• HIGH WELD STRENGTH

• LOWER WELD COST

• LESS CLEAN UP

• EASY TO USE

RAZORWELD TIG320 AC DC

TIG/MMA INVERTER WELDER REVOLUTIONARY DESIGN

• DC TIG

- HF or Lift Arc Start

- Full Weld Sequence Controls

- Full Digital Pulse Controls

• AC TIG

- HF or Lift Arc Start

- Full Weld Sequence Controls

- Full Digital Pulse Controls

- Multiple AC Wave Forms

- AC Frequency Adjustability

- Synergic AC Balance Control

• MIX ARC TIG

- AC weld current mixed with DC

- Increased penetration & weld speed

- AC/DC Mix Hz Adjustability

- AC/DC Mix Cycle Width %

- Use with multiple AC Wave Forms

• Digital Weld Sequence Control

- Pre and Post-Gas Time

- Start & Finish Current

- Up-Slope & Down-Slope

- 2T/2S, 4T/4S Trigger Latch

- Job Memory Storage & Recall

- Spot Timer function

• Digital Pulse Controls

- Peak & Base Current Select

- Pulse Frequency Adjustability

- Pulse Width % Adjustability

• MMA (Stick Electrode)

- DC and AC Current Options

- Ignition Start Current Adjustability

- Ignition Timer Control

- Arc Force Control

• Accessories / Features

- Integral Water-Cooler Included

- 8mtr ARC T4W Tig Torch Included

- Torch rating 280 Amps AC @ 100%

- Remote Amp Control Options

MULTIPLE AC WAVE FORMS & MIX ARC WAVE FORM (AC+DC)

AC SQUARE WAVE: Allows the current to switch from electrode + to electrode - very quickly. This produces high voltage as the current switches polarities allowing the arc to restart easily. The arc can be maintained without the use of high-frequency, the fast transition provides for responsive, dynamic & focused arc for better control.

TRIANGLE WAVE: Characterised by a particularly soft and concentrated arc combining the effect of peak amperage while reducing overall heat input. Leads to quick puddle formation and because of lowered heat input reduces weld distortion especially on thin material. This wave form is ideal for very precise welding of thin aluminium plate.

AC SINE WAVE: It is the standard Wave form, characterised by low noise and excellent arc control, it also gives the soft-arc feel of a conventional power source, while using square transitions to eliminate the need for continuous HF.

AC MIX ARC: This function of MIX AC/DC makes it possible to modulate the welding current, alternating a period of TIG AC with a period of TIG DC-. The efficiency of AC TIG welding can be combined with the high penetration of DC TIG welding, obtaining higher welding speeds and establishing the weld puddle quicker on cold workpieces. Ideal for welding heavier gauge material with less current than AC welding.

Power Supply 415V - 3 Phase

Duty Cycle @ 40°C 30% @ 320A TIG 30% @ 270A MMA

Current Range TIG 10 - 320A

Current Range MMA 10 - 270A

Rated Input Power 10 kVA

Certification Approval AS/NZS60974-1

COMPLETE PACKAGE DEAL

2OO PULSE

EVOLVE 200 PULSE

200 AMP PULSE MIG/TIG/MMA SETTING A NEW STANDARD SYNERGIC OPERATION

• Multifunction MIG/TIG/MMA

• 5” LCD Touch Screen

• Single Pulse & Double Pulse MIG

• Synergic MIG operation with over 100 programs

• MIG Gas/Gasless

• 5kg Spool Capacity

• Spoolgun & Push-Pull Ready

• DC-TIG with HF Start & Gas Solenoid

• TIG Pulse, Slope & Gas Timer Controls

• MMA with Anti-Stick, Arc Force & Power Limit

• Unique EVOLVE Smart App for device connectivity

• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph

Duty Cycle @ 40°C 15% @ 200A @ 25°C 40% @ 200A

Current Range MIG 40 – 200A

Current Range TIG 5 - 200A

Current Range MMA 20 – 180A

Rated Power 11 KVA

Dimensions 605x230x400mm

Weight 17kg

XA-TIG320RZ ACDC-K

$6,81304

$7,835.00 GST Incl.

Comprises RAZORWELD TIG320ACDC Power Source, Water Cooler, Machine Trolley, ARC T4W Water Cooled Tig Torch x 8m with Starter Kit, Earth Lead x 4m, Arc Lead x 4m, Argon Flowmeter Regulator.

MULTI 230 AC DC 230 AMP AC/DC MIG/MMA 4 IN 1 MULTI PROCESS WELDER

• True 4 IN 1 Multiprocess MIG, AC/DC TIG, MMA

• 5” LCD Screen

• Dual Plug Capable (10A & 15A)

• Power Factor Correction (PFC)

• 100+ Synergic Programs

• Job Memory

• Dual Gas Input

• Geared Wire Drive

• Smart Fan

• Generator Compatible

• Compliant to AS/NZ 60974-1

Power Supply 230V – 1ph

Duty Cycle @ 40°C 10% @ 200A (10)A / 25% @ 230A (15A)

Duty Cycle @ 25°C 40% @ 200A (10A) / 60% @ 230A (15A)

Current Range MIG 25 – 200A (10A) / 25 – 230A (15A)

Current Range TIG 10 – 200A (10A / 15A)

Current Range MMA 10 – 200A (10A / 15A)

Min Generator Power 8.5kVa (10A) / 10kVa (15A)

Dimensions 660x210x330mm

Weight 20kg

$3,595.00 GST Incl. $3,12609

C/w 3m DM26 Suregrip™ Mig Torch with Remote Controls, Arc Set x 4m, Twin Gauge Argon Regulator. Tig Torch is Optional and Extra

XA-MIG200EP-K $2,930.00 GST Incl. $2,54783

XA-MIG230RZMTS-K

C/w 4m XA24 Suregrip™ Mig Torch, ARC 4m T3FX TIG Torch + Spares, Arc Set x 4m, Argon Regulator and 15amp to 10amp converter.

RAZORWELD MIG205-SS

200 AMP MIG-TIG-MMA WELDER

MIG WELDING MADE EASY WITH SMART SET™

SMART SET: You select your wire size & gas type, then turn the amps up or down as required.

• Multifunction MIG/TIG/MMA

• 200 Amp - 230V

• MIG Gas/Gasless, 5kg Spool Capacity

• Smart Set or Manual Operation

• Spool Gun Ready

• DC TIG – Lift Arc with Euro Connect Torch

• TIG Gas Solenoid, Post-Gas & Downslope

• Compliant to AS/NZ 60974-1

Duty Cycle @ 40°C 20% @ 200A

Duty Cycle @ 25°C 45% @ 200A

Current Range MIG 30 - 200A

Current Range TIG-MMA 10 - 200A

Dimensions (mm) 470x190x380

Weight 18.0Kg

C/w 3m XA24 Suregrip™ Mig Torch, Arc Set x 4m & Regulator. Euro Connect Tig Torch is optional and extra

350AMP DC MIG/TIG/MMA

MIG350WRZ

350 AMP - 415V MIG-TIG-MMA WELDER

PUSH-PULL & SPOOL GUN READY

• MIG Gas/Gasless, 15kg Spool Capacity

• Burn Back Control

• Variable Inductance Control

• Spool Gun Ready

• Push Pulll Gun Ready

• Inbuilt Cylinder Rack

• DC TIG - Lift Arc Ignition

• MMA Electrode Hot Start

3 Phase Plug 32Amp 4-Pin

XA-MIG205SS-K

$1,53304

$1,763.00 GST Incl.

500AMP DC MIG/TIG/MMA INDUSTRIAL WORKHORSE

Power Supply 415V - 3 Phase

Duty Cycle @ 40°C 40% @ 350A

Duty Cycle @ 25°C 70% @ 350A

Current Range MIG 40 - 350A

Current Range MMA 20 - 350A

Wire Feeder Type 4 Roll Gear Driven

Dimensions (mm) 900x400x785

Weight 60.0Kg

C/w 4m XA36 Suregrip™ Mig Torch, Arc Set x 4m & Argon Regulator. Tig Torch is optional and extra

XA-MIG350WRZ-SP

$2,60000

• Compliant to AS/NZ 60974-1 $2,990.00 GST Incl.

40 AMP PLASMA CUTTER WITH BUILT IN AIR COMPRESSOR

GREAT FOR THOSE WORK SITES WITH NO AIR SUPPLY CAN ALSO USE EXTERNAL AIR COMPRESSOR

Protection Class IP23

Dimensions (mm) 510x210x380mm

Weight 18Kg

Certification Approval AS/NZ60974-1

C/w 6m SC80 Surecut™ Plasma Torch, Earth Lead, Spares Kit

RAZORCUT PLASMA CUT80

80

Synergic MIG control takes away the guesswork. Simply select your wire size, then turn the Synergic power knob up or down to suit the heat level required for the job.

FULL DIGITAL CONTROL FUNCTIONS

• HF Arc Start

• 2/4T Trigger Function

• AC Square Wave

• AC Balance Control

• AC Frequency Control

• User Friendly Digital Interface

• Full Digital Pulse Functionality

• Remote Amperage Capable

• MMA with VRD

Power Supply 230V - 1Ph Rated Input Power 5.8 KVA Rated Output 5 - 180A TIG Duty Cycle @ 40ºC 15% @ 180A @ 25ºC 40% @ 180A Dimensions (mm) 502x218x382 Weight 12.4Kg Certification Approval AS/NZ 60974-1 230V 10A

NEW RElEasE

I ieff 8.4A

Amp Range MIG 40 - 120A

Amp Range TIG-MMA 20 - 120A

Rated Power 8.0 kVa

C/w Fixed Mig Torch, Earth Lead, Drive Roll Set, 1kg Spool Gasless Wire.

Regulator. Tig Torch is Optional and

DC

C/w ARC T2FX x 4m Flexi-Neck TIG Torch with Starter Kit

VIPER TIG200VP

• DC TIG with HF Arc Ignition

• Pulse Control 0.2~200Hz

• 2T/4T Trigger

• Post Gas & Down Slope Control

• Remote Amp Control

• MMA with VRD

• MMA Arc Force Control

Power Supply 230V - 1Ph

Duty Cycle @ 40°C 30% @ 200A @ 25°C 60% @ 200A

Current Range TIG 10 - 200A

Current Range MMA 10 - 160A

Weight 7.5kg

Certification Approval AS/NZ 60974-1

C/w 8m XA17FX Suregrip™ Series Tig Torch with Remote Amp Control, Arc Set x 4m, Argon Flowmeter Regulator

VIPER CUT30 PLASMA CUTTER

30 AMP - CLEAN CUT 12MM STEEL LONG LIFE CONSUMABLES

$ 93304 230V 10A TIG18OAC

Arc Set x 4m, Argon Flowtube Regulator $1,910.00 GST Incl. $1,66087

TIG2OO

XA-TIG200VP-K $1,073.00 GST Incl.

CUT3O

Power Supply 230V - 1Ph

Duty Cycle @ 40°C 15% @ 30A @ 25°C 30% @ 30A

Current Range 20 - 30A

Cutting Thickness - Clean 12mm Steel

Cutting Thickness - Sever 14mm Steel

Air Flow Draw 6.0 cfm

Air Pressure 70psi

Dimensions (mm) 460x160x320

Weight 11.6kg

• Modern IGBT Technology • Pilot Arc Non Contact Start • 12mm Clean Cut on Steel • Contact Start Capable • Drag Cutting Capable • High Quality Surecut SC40 Torch • Pre-set Air with Auto Drain • Generator Compatible 7.5KVA MIG12O 230V 10A VIPER SYNERGIC MIG120 120 AMP MIG WELDER SYNERGIC MIG165 165 AMP DC MIG/TIG/MMA SINGLE KNOB CONTROL • MIG Gas/Gasless • 1Kg Spool Size • Automatic Burn Back • Small, Compact, Portable • Light Weight 5.2kg • Generator Compatible 4.5kVA Power Supply 230V - 1Ph Duty Cycle @ 40°C 10% @ 120A @ 25°C 25% @ 120A Current Range 40 - 120A Wire Sizes 0.6, 0.8, 0.9mm Rated Power 4.5KVA Certification Approval AS/NZ 60974-1 $400.00 GST Incl. $34783 C/w Fixed Mig Torch, Earth Lead, Spool of Gasless Wire. Regulator is Optional & Extra XA-MIG120V-K 165 230V 10A • MIG Gas/Gasless Capability • Synergic & Manual MIG • MIG Inductance Control • 2T/4T Trigger Control • DC TIG - Lift Arc • 5kg Spool Capacity • Euro Torch Connection • Compliant to AS/NZ 60974-1 Power Supply 230V - 1Ph Duty Cycle @ 40°C 10% @ 165A MIG Duty Cycle @ 25°C 25% @ 165A MIG Current Range MIG 30 - 165A Current Range MMA 20 - 140A Current Range TIG 20 - 160A Dimensions (mm) 500x210x385 Weight 10kg $877.00 GST Incl. $76261 C/w 3m XA15 Suregrip™ Mig Torch, Arc Set x 3m, Twin Gauge Argon

C/w Fixed SureCut™ SC40 Plasma Torch x 4m & Earth Lead x 3m

$ 72000

XA-CUT30V-K $828.00 GST Incl.

LEATHER WELDING BLANKETS HEAVY DUTY SPLIT CHROME LEATHER

Quality leather welding blanket, Kevlar stitched to increase resistance to heat, cuts & abrasion. Ideal for protection from sparks & spatter. Heavy duty metal grommets for tying down.

1.8m Square

PIPE STAND WITH ROLLER HEAD & V HEAD ATTACHMENT IDEAL FOR PIPE SUPPORT DURING WELDING, INSTALLATION AND MARKING OUT

Carrying

PIPE STAND V HEAD ATTACHMENT (S TYPE)

Load Capacity 2500 lb /1135 kg

Weight 3.1 kg

Suitable For Pipe Diameter 1/2 - 12"(12-300mm)

PIPE STAND RUBBER ROLLER HEAD (S TYPE) 24"

Load Capacity 1000 lb /450 kg

Weight 6.7 kg

Suitable For Pipe Diameter 2 - 24"(50-600mm)

PIPE STAND BALL TRANSFER HEAD (STEEL)

Load Capacity(for pair) 1000 lb /450 kg

1pair required per V-head

Sold as a pair(set)

PIPE STAND BALL TRANSFER HEAD (STAINLESS STEEL)

Load Capacity (for pair) 1000 lb /450 kg

1pair required per V-head

Sold as a pair(set)

THE ULTIMATE TIG WELDERS GLOVE MADE FROM GOAT AND DEER SKIN

Developed for the Tig operator, these gloves are constructed out of 3 types of leather, a “Split Deerskin” palm for excellent finger tip sensitivity “Goat Skin” back for dexterity and heat protection and “Cowhide Cuff” for durable wrist and forearm protection. 100% Kevlar stitched for strength and better protection against seam burn out.

$2261

$26.00 GST Incl.

XA-10-1027-L GDS Gloves-Large

XA-10-1027-XL GDS Gloves-X Large

Either size same price.

MACHINE TROLLEY INVERTER WELDERS

• Universal design with cylinder tray

• Easy to assemble kitset

• Heavy gauge metal

• Solid rubber rear wheels

• Good quality front wheel castors

• Top Tray 450 x 500mm

• Size: 700 x 300 x 775mm

XA-TR165-190

$8696

$100.00 GST Incl.

GASLESS MIG WIRE PREMIUM FLUX CORE

XA E71T-GS is designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 1.2mm, without burn-through.

XA E71T-11 most popular all postion general purpose gasless wire for single pass and limited multiple pass welds, ideal for mild steel, galvanised steel up to 12mm material thickness.

SOLID MIG WELDING WIRE, PRECISION LAYER WOUND FOR FEED RELIABILTY

No.8 WIRE ™

HEAVY

DUTY 15 AMP EXTENSION

LEADS

USE THE RIGHT LEAD TO PROTECT YOUR INVERTER WELDER

ALUMINIUM MIG WIRE MARINE GRADE

Xcel-Arc 5356 Aluminium MIG Wire is one of the highest quality aluminium welding wires available due to its consistent feed ability which is accomplished through the use of advanced wire drawing technology and a proprietary triple shaving process. 5356 is sometimes referred to as “marine grade” because it is widely used in the marine industry and it’s very commonly found in general fabrication applications as well. The major element in 5356 wire is 5% magnesium. The wire has excellent weldability and corrosion resistance.

HEAVY DUTY RUBBER SHEATHED & BRAIDED EXTENSION LEADS THAT PREVENT VOLTAGE DROP PROVIDING ADDED PROTECTION AND SAFE USE OF YOUR INVERTER WELDER ON SITE

TIG WELDING TUNGSTEN ELECTRODES

QUALITY WELDING ELECTRODES

NEW CONVENIENT 1KG PACKS

Reduce both wastage and the cost of smaller jobs with new Magmaweld 1kg plastic packs. Also introducing ESR11 General Purpose in 2.0mm diameter, not previously available in larger pack sizes. There’s a broad range of different electrode types and sizes in the 1kg packs so if what you need isn’t shown here, please ask.

GENERAL PURPOSE STAINLESS

v191

• V-Pad

$ CLAF-UG85MC3

CLAF-UM85PMC3

320 x 140mm

CLAF-UM125MC3

50

84 $97.18 GST Incl.

$ 30 +GST 152

$175.15 GST Incl.

Strong Hand Locking C Clamp with Round Tip

• Improved features for professionals and Do-It-Yourselfers.

• Made of heat treated steel and nickel/chrome plated for strength and durability.

• Updated features help you work quickly, safely and efficiently.

Welding Locking Clamp 228mm

• Wide U-Shaped jaw for workpiece visability, weld access and secure holding.

CLAM-02

$ 70 +GST 25

$29.56 GST Incl.

Air Gravity Feed Sand Blaster

• Compact, portable sandblaster with large capacity

• Gravity feed design offers uninterrupted and consistent material flow

• Gravity feed design for high operating efficiency

• Pistol grip for easy and comfortable control

SANB-A3714

$ 50 +GST 131

$151.23 GST Incl.

• Garnet medium for Sandblasters

SAND-W1904

$ 20 +GST 69

$79.58 GST Incl.

Metal Polish 1kg/750mls

• Brilliant high gloss finish

• Cleans, shines & protects

• For all metal surface types

POLM-01

$ 80 +GST 72

$83.72 GST Incl.

$ 70 +GST 207

$238.36 GST Incl.

Strong Hand Locking C Clamp with Swivel Pads

• Improved features for professionals and Do-It-Yourselfers.

• Made of heat treated steel and nickel/chrome plated for strength and durability.

280mm x 102mm

CLAM-PR115S

$ 00 +GST 52

$59.80 GST Incl.

450mm x 114mm

CLAM-PR18S

$ 80 +GST 86

$99.59 GST Incl.

Arrow Magnetic Welding Holders

• Premium quality materials

• Powerful magnet

• Holds work firmly at 45, 90, 135-degree angles

Holds up to 25lb

MAGW-T21130

$ 70 +GST 7

$8.86 GST Incl.

Holds up to 50lb

MAGW-T21131

$ 60 +GST 14

$16.79 GST Incl.

Oxygen Cylinder 1 Litre

• Disposable cylinder means no more wasted cylinder rental

• Maximum run time for Oxygen Cylinder is 20 minutes

• 105L of Oxygen

• Suitable for 1811167-1 Oxyset

GASC-1811320

$ 90 +GST 96

$111.44 GST Incl.

Autosol Rust Ex Heavy Duty Metal Life Saver 250mls

• A powerful heavy corrosion and stain remover that is quick and easy to use

SAVM-34250

$ 50 +GST 15

$17.83 GST Incl.

BONUS GASC-MG9-I

Oxyset Mobile Brazing & Welding System

• Portable Gas Welding System

• Great unit for onsite and hard to reach areas

• Applications include Welding, Soldering, Brazing and Heating

GAST-1811167-1

$ 80 +GST 640

$736.92 GST Incl.

GRADE 80 WELD-ON RING

• Clearly marked showing lift and pull (lashing) rating

• Safety factor 4:1

• Tested and certified to EN1677

BOW SHACKLE

• Hot dipped galvanised including painted yellow pin Alloy Grade S

• Clearly marked with brand, grade, size, rating and ID batch number

and certified to AS2741 • Safety factor 6:1

• Made from C15 carbon steel with zinc plated finish and has a standard larger eye

• Marked with working load limit in tonne

Hot

galvanised body and pin

• Not rated for lifting;

DIN741 Marine & Commercial only

•

colour coded

• Safety factor 7:1

SAFE, STRONG, RELIABLE, PORTABLE POWER

10

Power your 15 Amp tools safely from a domestic power socket

• Comes with RCBO protection

• Weatherproof for outdoor use

• Available from 2 metre to 20 metre lead

• Certified to AS/NZS Standards

• Mounting holes for fixed installation

• Designed and assembled in New Zealand

Code: SM2

Industrial Power Board

Be compliant on site; power your portable tools safely

• 5 x 10A sockets: 250V

• Ground clearance

• Overall RCBO protection

• Lightweight and easy to carry

• Certified to AS/NZS Standards

• Robust, waterproof enclosure with durable handle

32

Distribution Unit

Provides flexibility on site with 32 Amp 3 phase supply

• Impact resistant robust enclosure for outdoor use

• Assembled with standard industrial sockets for easy connection

• Customisation available on request

• Designed for NZ conditions

• Anti-theft locking ring available on request

• Certified to AS/NZS Standards Code:

Code: SM7.05

dipped

Amp Temporary Power

– 15A Power Supply Adaptor

50mm Rubber Wheel Capacity Castors

QUALITY INDUSTRIAL EQUIPMENT

20V Lithium-ion Cordless Grease Gun

630A

• Backlit display provides real time battery level, grease level & grease dispensed operator feedback

• Grease pressures up to 7,250psi (500bar)

• Adjustable delivery rates of 100g/min or 160g/min

• Supplied with 2 x 2Ah batteries & compartmentalised, protective plastic carry case

• Able to dispense up to 16 cartridges before battery recharge is required

• The display turning red indicates a blocked lube point or another issue

• Battery recharge time of 70 minutes

• Optional 4amp battery capable of dispensing up to 32 cartridges also available

• 430A also available for 400g cartridges

12V Diesel Refuelling Tank Kit

52000

• Capable of flow rates of up to 50L/min

• Includes 4m of antistatic fuel delivery hose, 2m of battery cable, a stainless steel & brass fuel filter and a manual nozzle

• Maximum head capacity of 15m

• Self priming vane pump includes a built-in bypass

• Duty cycle of 30 minutes on, 30 minutes off

• Suction capacity of up to 2m

• 52001 as above but 24V

$ 433.60+GST

$498.64 GST Incl

1" Mechanical Diesel Fuel Meter

51008

• Accurate between flow rates of 20L/min & 120L/min

• Mechanical gear meter accurate to ±1.0%

• Maximum working pressure of 142psi (10bar)

• 1" BSP(f) inlet/outlet ports

• Batch total of 999L displayed with easy to read 18mm high digits

• Suitable for gravity feed or pump applications

• Repeatability of ±0.2%

• Field calibration possible

• 3-digit batch display

• Also suitable for use with kerosene

$289.00+GST

$332.35 GST Incl

Lever Action Grease Gun

600A

• Grease pressures of up to 12,000psi (828bar)

• Delivers up to 1.6g of grease per stroke

• Unique Twin-Lock System seals the piston & eliminates the possibility of dummy lubrication

• Ever-Flow System enables the gun to be used with thick/tacky greases even on the coldest winter mornings

• Coarse thread on barrel assembly eliminates the possibility of cross threading

• Light weight aluminium die cast head assembly

• Manufactured in Germany

$79.00+GST

$90.85 GST Incl

EL Series 2 Drum Spill Container

SC60010N

• Designed for static spill containment for up to 2 x 205L drums

• Manufactured from high strength polyethylene that will not rust or corrode

• Compatible with most forklifts & pallet trucks

• Removable platform for ease of cleaning

• 400L capacity

• Dimensions: 1,320mm (L) x 670mm (W) x 450mm (H)

$ 485.52+GST

$558.35 GST Incl

Flip Front Welding Helmet

Polypropylene shell with lift front lens, 51x108mm

Easily adjustable head gear with replaceable sweatband

Fully assembled helmet comes with glass IR shade 10 lens and two polycarbonate cover lenses.

$1999+GST

Detroit 6" Zip Side Safety Boots

Rugged Flex 6" height ankle with water repellent hydro oiled leather for water resistance. Padded tongue and collar for added comfort. PU footbed for all day comfort.

Browguard with Clear Faceshield

Manufactured from High Impact Resistant ABS

Orange brow guard

Easy adjustable Ratchet head gear

Lift-up function

Use with the 'FC' series of visors Complete unit with clear shield

ProFlex 230Ltr Leather Knee Pads

Protects against welding sparks & slag - genuine leather cap is resistant to heat, puncture and abrasion for long-lasting use on the toughest worksites.

Vibram outsole for grip, traction, SRC slip resistant, HRO heat resistant and flexibility with every step. $5714+GST $65.71

$24000+GST $276.00

Grizzly Black Nitrile Gloves

•Industrial strength nitrile gloves

•Hides dirt and grime

•Chemical and puncture resistant

•Proven performer in engineering settings

•Latex

Wise Class 5 Bluetooth Earmuffs

•AS/NZS:1270:2002 Class 5

•Connect to almost any smart device

•Rechargeable lithium ion battery

•8+ hour battery life with 1.5 hour charge time

•Listen to music and take handsfree phone calls

•Built in microphone.

Sqwincher Qwik Stiks 50pack

Electrolyte enhanced beverage for effective hydration.

Low sodium, caffeine free and gluten free. Add one sachet into a 600ml drink bottle with water, shake and drink

Available in Lemon Lime, Orange, Mixed Berry, Cool Citrus, Grape, Lemonade

Coloured T-shirt Rags

Coloured T Shirt Rags available in 10kg or 15kg bags

Ultra Heat Kevlar Welding

•Suitable for welding and foundry work

•Reinforced palm area for extra durability

•Winged thumb for dexterity

•Top quality suede leather

•Cotton lining for comfort

•Protects

Wise Carbon P2 Mask with Valve - 10pk

•Comfort valve helps prevent moisture build up making breathing easier.

•Twin heavy duty straps.

•Adjustable nose piece for custom fit to a wide range of face shapes and sizes.

•Soft foam nose piece for comfortable custom fit

Sqwincher ConcentrateLemon Lime (2LTR)

Electrolyte enhanced beverage for effective hydration.

Low sodium and caffeine free.

2L Bottle mixes to 20L.

Available in Lemon Lime, Orange, Wild Berry, Tropical Cooler, Grape, Lemonade $3329+GST

$38.28 GST Incl.

Zirconia Flap Disc

Made from Premium Zirconia Grain and have a high number of zirconia polyester flaps which provides longer life. Suitable for grinding mild steel aluminium stainless steel and cast iron

FUSION PROBAN WELDERS JACKET LEATHER SLEEVES

Flame-resistant Proban cotton body, leather sleeves Breathable–stays cooler than fully leather jacket

Two sizes: L-XL; 2XL-3XL

(incl.)

FUSION LEATHER WELDERS BLANKET EFLB

Heavy duty chrome leather Kevlar stitched to increase resistance to heat, cuts and abrasion

Size: 1800mm x 1800mm

$106.95+GST

SELL PRICE (excl.) $122.99(incl.)

FUSION PREMIUM WELDERS APRON EFPA

Highly adjustable harness— strapping and quick release buckle for a perfect fit

Sizes: L (100 x 58cm), XL (110 x 63cm)

ESKO GREY WOLF WELDERS GLOVE

High quality cow split leather for comfort and economy

Reinforced palm to first finger for added durability

ESKO BLUE BRUTE PREMIUM WELDERS GLOVE BB160

High quality blue cow split leather Kevlar stitched to withstand high temperatures for longer periods

$14.95+GST SELL PRICE (excl.) $17.19(incl.)

ESKO HOT SHOT WELDERS GLOVE BR160

High quality red split leather Reinforced palm to first finger for added durability Lined and welted

$13.10+GST SELL PRICE (excl.) $15.07(incl.)

FUSION

LONG LIFE

XTREME ZIRCONIA FLAP DISCS

• High performance, zirconia alumina grain

• Heavy cotton cloth with fibreglass backing

Code Description +GST Inclusive 78072761264 125 x 22 mm P40 $5.57 $6.41 78072761265 125 x 22 mm P60 $5.57 $6.41 78072761267 125 x 22 mm P80 $5.57 $6.41 78072761282 125 x 22 mm P120 $5.57 $6.41

COOL CUTTING

NORTON BLAZE X CERAMIC FIBRE DISC

• Specially designed for use on carbon steel

• Ceramic micro-fracturing grain constantly self-sharpens

• A better cut rate and longer disc life

Code Description +GST Inclusive 78072718988 125mm P36 $3.03 $3.48 78072718989 125mm P50 $3.29 $3.78 78072718990 125mm P60 $2.23 $2.56 78072718991 125mm P80 $2.14 2.46

CONFORMABLE

NORTON VORTEX ALUMINIUM OXIDE RAPID BLEND DISCS

• 125 x 22 mm medium grade

• High performance engineered grain for long life

• Fewer steps to a final finish

• Conformable structure gives a uniform finish

CONFORMABLE

NORTON NEX SILICON CARBIDE RAPID BLEND DISCS

• 125 x 22 mm fine grade

• Imparts a high quality, shiny surface finish

• The new 2SF discs have a harder density for longer life and good form holding

• For best results, use at 6000 RPM

COOLER GRINDING

NORTON AIR-COOLED TURBO BACKUP PAD FOR FIBRE DISCS

• Slotted hub design and curved ribs draw heat away from the grinding zone, reducing disc loading and increasing life.

LONG LIFE

NORTON BLAZE RAPID STRIP DISCS

• 125 x 22 mm

• Long lasting grain and advanced resin bond

• Does not shed on rust-encrusted pieces or load on soft metals

FLAP DISCS

$ 24 .29 +GST $ 27.93 Incl. GST 63642573692 SCRATCH FREE

NORTON BEAR-TEX BACKUP PAD FOR SURFACE CONDITIONING DISCS

STRONGER GRIP

• Designed specifically with longer hooks

WIPES RESIDUES

NORTON LIQUID ICE DETAILER SPRAY

• Cleans up excess buffing residue and provides paint protection

$ 43 .57 +GST $ 50.11 Incl. GST 66623321828

RESISTS LOADING

$ 28

• Clean Bond™ technology for reduced smearing

• Acheive a burr-free finish in fewer steps without damaging the base material

• Resists loading on softer materials

Code Description +GST Inclusive 66254441838 127mm Coarse $8.29 $9.53 66254441844 127mm Medium $8.29 $9.53 66254441848 127mm V/Fine $8.29 $9.53

HIGHLY ABSORBENT

NORTON BLUE MAGNET MICROFIBRE CLOTH

• Ultimate performance cleaning cloth for general purpose applications

• Absorbs 8 times its weight in water

Quick Release Coupler

Pressures up to 10,000psi

1/8" BSP (F) inlet

Ultralight 85g only

Hardened 4-jaws

Compact size: 74mm x 16mm

Suitable for all grease gun types

Lever Action Barrel Pump

Delivers up to 500ml per stroke

Lever operated pump

Suitable fluids: diesel, kerosene, lubricating oils to SAE

90, service fluids

Telescopic suction tube 60 – 205L

Flexigun 450g Grease Gun

Delivery pressure up to 68,900kPa (10,000psi)

Flexible 300mm (12") high pressure extension hose

Heavy-duty 1.6mm thick barrel

Maximum viscosity - Up to NLGI 2

Compatible with 450g cartridges

High Vis STARTER KIT - 20L

Lubricant Range - Oils up to SAE140

Delivery Rate - Min 2L/min

Drum size - Nominal 20L (5GAL)

Suction Tube extender & 1.5m clear hose

On demand flow control

Battery - 2.0Ah Li-Ion and charger

Self Priming

$56770+GST

$652.86 GST Incl.

Compressed Air / Water Reel

Hose Size - 3/8"x 20m

Hose Type - Compressed Air

Inlet/Outlet - 3/8"/ 1/4" BSP

Pressure Rating - 275 psi.

Hose Material - Rubberised reinforced PVC

Retracta Oxy/LPG Reel

Hose Size - 1/4"x 15m

Hose Type - Oxy/LPG

Inlet/Outlet - Gas Thread/ Gas Thread

Pressure Rating - 175 psi.

Hose Material - Reinforced Rubber (AS1335)

Quick Release Coupler Long Nose

Pressures up to 10,000psi

1/8" BSP (F) inlet

Measuring 129mm x 16mm

Hardened 4-jaws

Suitable for all grease gun types $5757+GST $66.21

All Purpose Oil Transfer Pump

Suitable for oils up to SAE140 / ISO680 viscosity

Used for engine, gear, transmission, hydraulic oils and pre-mixed engine coolants

Delivers up to 75ml per stroke

Suits between 20L - 25L drums via suction tube extender

Levergun 450g

Delivery pressure up to 82,750kPa (12,000psi)

Rigid 150mm(6") high pressure extension hose

Up to 1.5g per shot

Heavy-duty 1.6mm thick barrel

KY Supergrip 3 Jaw coupler

Compatible with 450g cartridges

P3 Power-Lube 20kg Trolley

P6001 (50:1) Air-operated pump

Maximum pump output pressure: 51,700kPa (7,500psi)

Maximum gun output pressure: 68,900kPa (10,000psi)

Compatible with most 12.5-20kg pails

4m x 6mm ID delivery hose

Output 460g/min (at pump)

BP20S-OHA

$207751+GST

$2389.14 GST Incl.

Suitable for greases up to NLGI 2 P3-OS2

Retracta Oxy/Acet Reel

Hose Size - 5mm twin hose x 15m

Hose Type - Oxy/Acet

Inlet/Outlet - Gas Thread/ Gas Thread

Pressure Rating - 175 psi.

Hose Material - Reinforced Rubber (AS1335)

Retracta Welding Gas

Argon Reel

Hose Size - 5mm (3/16”) x 20m

Hose Type - Welding Gas - Argon

Inlet/Outlet - Gas Thread

Pressure Rating - 200psi

Hose Material - Reinforced Rubber (AS1335)

Hydraulic Crimper 4-70MM²

Comes with eight sets of interchangeable dies (4, 6, 8, 10, 16, 25, 35, 50, 70mm² dies)

Suits lug size 4mm- 70mm²

Overall length 320mm

Up to 45KN crimping force

Stroke- 10mm

$10376+GST

Professional LED Worklight

Top Light with direct beam. Work Light with wide flood beam.

Strong magnets and two 360° rotating hooks allow for hands free operation.

Rechargeable Li-ion battery via USB charging lead. 180° swivel stand with strong inbuilt magnet.

Dead Blow Hammer

Manufactured from nitrile chemical resistance rubber material with a moulded handle for superior comfort and grip

Professional Diamond Tipped Mini Engraver

Handy pocket engraver easily marks glass, ceramic, plastic and hardened metals

Long lasting diamond tip

Suitable for personalising toys, sport equipment, tools, appliances, gifts and trophy’s

$4857+GST

$55.86

Chisel, Pin & Centre Punch Tool Roll - 11pc

Set of 11 chisels and punches in handy canvas tool roll with clip. Quality German Manufactured Product

Aluminium Straight Edge

Features one straight edge and one graduated edge Two square corners with one hanging hole

Manufactured from high grade aluminium.

Protractor 180°

For accurate measurements of 180° with 100mm rule Etched markings for ultimate precision and accuracy Stainless steel deep etched for long term visibility an non glare.

Wire Twist Pliers - 170mm

For installation and twisting of steel fixing wire Features wire cutter, serrated gripping zone, tapered jaw for confined area access and wirelock and twist return mechanism.

Manufactured from drop forged alloy steel for superior strength and durability

$5909+GST

$67.95

Twin & Triple Leg Puller & Bearing Separator Combination Kit

Features hydraulic ram, bearing separator, twin and triple head beam configuration, three leg sizes (100, 150 & 200mm)

Manufactured from drop forged high quality steel, heat treated for strength and durability

$37704+GST

$433.60 GST

Triple Leg Mechanical Puller150mm

Triple leg pullers feature double ended reversible legs to enable both internal and external applications

Designed for easy removal of bearings, pulleys, gears and sprockets

Spread (min/max): 65 - 150mm

Reach: 150mm

$8123+GST

Twin Leg Mechanical Puller150mm

Twin leg pullers feature double ended reversible legs to enable both internal and external applications

Designed for easy removal of bearings, pulleys, gears and sprockets

Spread (min/max): 65 - 150mm

Reach: 150mm

$6194+GST

$71.23 GST

Split Collet Extractor Set - 9pc

Comprehensive split collet extractor set featuring eight variable capacity split collets

Collet size range: 8 -32mm

$26362+GST

$303.16 GST Incl.

PRECISION COMBINATION SET

- Fully hardened & tempered precision rules with deeply etched graduations

- Centrally mounted protractor vial allows unrestricted viewing

- Satin chrome scale plate on protractor

- Rule clamp allows positive location & clamping

- Square head offers the following fixed angles: 15º, 30º, 45º, 60º, 75º & 90º

HEAVY DUTY METALWORKING CLAMPS

- Made from high quality drop forged steel

- Special Hex designed threaded screw end

- Rail dimensions 29.4mm x 15.0mm

- Throat depth 140mm

- Heat treated replaceable circular clamping plates

- Full ball swivel joint allows 35° angle clamping

ENGINEERS VICES

- High quality grey cast iron body & sliding jaws

- Hardened steel replacable

- Fixing hole for bench mount

- Precision milled slide

- Tommy bar will bend before vice is over-stressed

-

GENERAL PURPOSE METALWORKING CLAMPS

- Made from high quality drop forged C45 steel

- Rail dimensions 19.5mm x 9.5mm

- Throat depth 120mm

- Safety end stop

- Ball swivel joint

LOCKING PLIERS & C CLAMPS

- Heat treated, wear resistant serrated & hardened jaws

- High grade chrome molybdenum steel body & jaws

- Screw adjusts to fit the work piece & exerts pressure that is maintained

- Guarded release trigger protects against accidental release

An everyday 1/2Dr Socket set, featuring a solid range of Metric sockets 10-32mm and key drive accessories, stored securely in a Powerbuilt blow molded case

Butane Soldering Iron Set

Gas operated micro soldering device up to 1,300°C / 2,370°F

Powered by butane (lighter fuel) and features a piezoelectric ignition

Portable and lightweight suitable for heating, soldering and heat-shrinking

$8700+GST

$100.05 GST Incl.

Socket Set 1/4" 29pc Combination

With Reversible Ratchet Handle with Quick Release

29 piece ¼" drive

Metric 4-14mm (satin finish)

Imperial 3/16" - 9/16" (mirror) $10200+GST

Combination Wrench Sets

Contractor/Tradie heavy duty storage is the perfect solution for all your on-site tool and equipment storage needs, secure all your professional and personal items on the job site.

Full piano hinged lid and gas struts for easy opening

tamper-proof locking system

Two recessed heavy-duty handles each end Raised skids enable maneuverability with a fork lift Supplied as flat pack, assembly is required.

Ratchet Crimping Tool Kit

Includes 5 exchangeable crimping jaws

Insulated terminal ends, 0.5-6mm2

Non-insulated terminal ends 0.5-10mm2

Open-barrel terminal ends 0.5-6mm2

Insulated cord-End Terminal ends 0.5-4.0mm2

Insulated cord-End Terminal ends 6-16mm2

$20000+GST

Socket Set 1/2" 43pc Combination

With reversible Ratchet Handle with Quick Release

Metric 8-32mm (satin finish) Imperial 3/8" - 1 ¼" (mirror) 16 & 21 mm Spark Plug Socket

Tool Chest Set- 63pc

Includes: Pliers, Hex Key Wrenches Combination Wrenches, Chisel Punches

Socket

Drop forged chrome molybdenum alloy steel. Blades with serrated edges.

High tensile strength and spring for longer life. Solid and comfortable handle with non-slip design. Safety auto latch (D.PAT).

Combination pliers

European type

With bevel

Polished head

Available in a range of sizes

Combination Metric Wrench

Set - 12 8-24mm

Chrome vanadium alloy steel

Chrome plated

Ring and Open end

wrench set in pouch

Sizes: 8-24mm 26pc Metric3/8"DrSocket Set

Combination Metric Wrench Set - 26 Piece 6-32mm

Chrome vanadium alloy steel

Chrome plated

26 Piece Set - Combination (ring and open end)

wrench set in pouch

Sizes: 6-32mm

3/4” DR. Telescopic Lever with Reversible Ratchet

180° swivel ratchet head

3 position ratchet control: forward/ reverse/lock

Telescopic handle: 620~970 mm

15° gear action (24 teeth) 11pc Impact3/4"Dr

Contains: Chrome Vanadium Alloy Steel

1/2" Dr Reversable Ratchet, Powerbar and Sliding T Bar

125mm and 250mm Extension Bar

20.8mm x 1/2 Drive 12 Point Spark Plug Socket

1/2" Dr 12pt Metric Sockets from 10mm to 32mm

1/2" Dr 12pt Imperial Sockets from 5/16" to 1.1/4"

1/2" Drive impact socket set

Contains: 1/2" Drice impact socket set

Contains:

KT4435M series Sockets - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 36

Metric 12pt Sockets: 22mm-50mm.

Imperial 12pt Sockets: 1"- 2"

Includes: Ratchet, Extension Bar, Sliding T Handle

Contains:

drive 12pt standard sockets: 6–22mm 3/8" drive 12pt standard sockets: 1/4–7/8" 3/8" drive reversible ratchet 3/8" drive sliding t–handle 3/8" drive flexible handle 3/8" drive universal joint

11p WrenchR&OESet

3/8"Dr 36pc Combination Socket Set

14pc SpannerR&OESet

Tape Measures

All metallic components are stainless steel for rust resistance. Class II accuracy printed blade, controlled by precise equipment. Nylon coated blade for maximum durability.

Ball Pein Hammer

Hickory Handle.

Hand Brushes

For deburring, paint and rust removal, cleaning, edge blending and surface preparation.

Impact Torsion 36pc Set

This set contains

Crimped Wire Cup Brushes

Allows for softer brushing for surface preparation and light paint, rust and weld scale removal. HD Steel Wire allows it to be used on steel, brass, iron, plastic and wood surfaces.

Annular Cutter 5pc

30mm Deep HSS Annular cutters: 12, 14, 18, 22mm

Pilot Pin

Fully ground step hardened teeth Precision ground flutes to reduce friction and increase feed rates.

Twistknot Wire Cup Brushes

Ideal for hard/aggressive brushing and contaminant removal. Great for paint, rust and weld scale removal also. Twistknot XHD wire is a premium tenacious wire providing faster, more aggressice cut together with longer life.

236pc Extra Deep Tool Box Set-Metric

48pce Metric/Imperial 1/4" Drive Std & Deep Socket Set: 4-13mm & 5/32-1/2"

Metric/Imperial 3/8" Drive Std & Deep Socket Set: 8-22mm & 3/8-13/16"

Metric/Imperial 1/2" Drive Standard Socket Set: 10-32mm & 3/8-1.1/4"

Stubby and Std Ring & Open End Wrenches: 6-21mm & 7/16-3/4"

2 x Adjustable Wrenches: 150mm & 200mm

4pce Internal & External Circlip Plier Set:7"

2pce Lock Grip - 9" & Groove Joint - 10" Plier Set

14pce Hex Key Sets: 2.5-10mm & 3/32-3/8"

33pce Bit Set (including #2 Square Drive)

3 x Pliers: Combination, Long Nose & Diagonal Cutting

8 x Screwdrivers: Phillips, Pozi, Square & Slotted

9 x 3/8" Drive Bit Sockets: H3-H12 (Hex) & T30-T40 (Torx)

1 x Ball Pein Hammer: 16oz

1 x Aviation Tin Snips: 10"

1 x Flat Chisel: 15mm

1 x Centre Punch

Viper Jobber Drill Set V3M

Up to 2X faster drilling speeds versus conventional HSS drill bits.

118° Split Point (>3.5mm & 9/64") - Minimises wandering when starting

Made from European M2 High Speed Steel (HSS)Bright Finish - For general purpose applications, non-ferrous metals & plastics

$16900+GST

Venom Cutting Paste

400 gram

Reduces torque and friction.

Produces extremely high quality surface finish.

Mild clinging action adheres to tool and part when vertical work is required.

Clamp Aluminium One Hand

Aluminum alloy clamp

Maximum clamping force up to 350kgs

Recip Saw Set 5 Piece

Wood/Metal Cutting

Specially for wood and metal cutting. Made from Cobalt Bi- Metal HSS for flexibility, heat and break resistance.

Black Book Engineers V3

Pocket sized format makes this book an ideal reference in any tool kit.

Lay flat format with wire binding for ease of use on workbench

Matt laminated grease-proof pages

Hose Reel Air/Water

Auto lock / auto rewind

Turbo

• Ergonomic handle design for precise operation

• Continuous on/off switch

Adjustable hose stop 2 m leader hose with brass fittings Wall mount with pivot $6159+GST

• Adjustable flame with on/off control

• Fully functional flame even when inverted

• Solders 3.18 - 76 mm (1/8 - 3") copper pipe

• Brazes 1.5 - 25.4 mm (1/16 - 1") copper pipe

Air Hose Assembly BLUE FLEX

Hose with QD Coupler & Connector

Blue Flex Hose Assembly with Connector and Coupler fitted. Available in made up lengths 10, 15, 20 & 30 metres with fittings.

Suction Spray Gun

High production suction spray gun. Ideal for auto refinishing. Fully adjustable wide spray fan pattern control.

Fluid tip 1.8 mm, Fluid inlet 3/8“ NPS, Air consumption 198-255 lpm (7-9 cfm)

$13900+GST

$159.85 GST Incl.

73AS Rivet Assortment Kit

900- piece assortment kit containing aluminium/steel blind rivets and drill bits.

-900 pieces

-Steel / Aluminium

-73AS4-2 - 73AS6-5

-Drill bits to suit

$8700+GST

73ASL Rivet Assortment Kit

277- piece assortment kit containing large flange aluminium/steel blind rivets.

-277 pieces

-Steel /Aluminium

-73AS6-4 - 73AS6-14

Drill bits to suit

$8700+GST

John Guest Fitting Assortment

Tube/ Pipe Cutter

AGA Approved -15 to 150 C 3900KPA

Thread Tape

For Stainless steel fittings stops galling & seizing

Steel Bundy Tube

AGA Approved -15 to 150 C 4900KPA

Stainless Steel Ball Valves

The RMC Stainless Steel Ball Valves range in size from 15 to 50mm.

Brass Fitting Assortment 131pc NPT

DTE 25 Ultra Hydraulic Oil 20L

Mobil DTE 25 is a super-premium ISO

Viscosity Grade (VG) 46 antiwear hydraulic oil.

The advanced technology formulation has been shown to reduce hydraulic oil consumption significantly.

$13644+GST

$156.68 GST Incl.

Soluble Cutting Oil 20L

Solex is a high grade base stock blended with emulsifier and bactericide to provide a general purpose soluble oil concentrate.

General purpose metal cutting and machining coolant. Used in industrial applications where a general purpose soluble oil is required. Mix at 5% to 10% concentration with clean fresh water to form a white emulsion.

$23017+GST

$264.70 GST Incl.

Mineral Sponge Absorbent 22L Bag

• Absorbs immediately on contact

• Strong wicking action

• All natural

Anti-Spatter

Keeps nozzles, diffusers, tips and shrouds clear of spatter build-up

Helps maintain optimum equipment performance and lifespan

Prevents weld spatter from sticking to tables, jigs and other metal work surfaces

Heavy Duty Degreasing Safety Towel

Specially dual textured, the scrubbing side removes grease and oil whilst the softer side provides lint-free wiping

Safely removes grease, oil, wet paint, carbon, graphite, tar, soot, grime, and much more. Ready-to-use, non-toxic, non-citrus formula with no added colour or scent.

Magic Mud

Magic Mud

100% natural hand cleaner removes grime, dirt and smells. Leaving your hands feeling fresh & supple.

Handy everywhere including any workshop, farm, garage, shed, car or boat, even the household kitchen and laundry.

$2217+GST $25.50

• Suitable for use on more hazardous chemical spills than most other spill absorbents $12.60+GST

are a fair-minded company and try to exceed the requirements of the 'Fair Trading" legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologise and try to take all reasonable measures to fix the issues for you.