Enduro Engineering Catalog 2010

Paul Whibley 2009 GNCC & OMA Champion

2 01 0

p r o d u c t

g u i d e

DEBRIS DEFLECTORS KTM Accessories All-New Moto Roost Deflector

The New EE Moto Roost Deflector has been built for durability and functionality.

The mounting hardware consists of a billet T6061 aluminum bracket supporting an open ended Polypropylene rail that will give the support you need yet still flex back under an impact. This system will support the popular EE Roost Deflectors that are available in a variety of colors. A spring loaded aluminum hinge enables the Roost Deflector to pivot forward along with your folding levers in the event of a fall, but will hold in place while blocking debris from other machines.

Bar End Inserts

Ideal for when you would like to remove your Debris Deflectors. Handlebar End Inserts are a great combo when switching from Debris Deflectors to Moto Roost Deflectors.

54-100

Moto Roost Deflector 52-120 52-121 52-123 52-124 52-125 52-126 52-127 52-128 52-129 52-100

$49.95 $49.95 $49.95 $49.95 $49.95 $49.95 $49.95 $49.95 $49.95 $34.95

Moto Roost Deflectors White with Mounting Hardware Moto Roost Deflectors Clear with Mounting Hardware Moto Roost Deflectors Deflectors Blue with Mounting Hardware Moto Roost Deflectors Deflectors Black with Mounting Hardware Moto Roost Deflectors Deflectors Orange with Mounting Hardware Moto Roost Deflectors Red with Mounting Hardware Moto Roost Deflectors Black/Orange with Mounting Hardware Moto Roost Deflector Yellow with Mounting Hardware Moto Roost Deflector Green with Mounting Hardware Moto Roost Deflector Mount Kit

Product of the Year

Triple Clamp Debris Deflector Mount Set

The NEW Enduro Engineering triple clamp Debris Deflector mount, will securely fasten your EE Debris deflector on most top triple clamps with side access pinch bolts. (Not for stock KTM triple clamps) 50-025 $42.95 Triple clamp Debris Deflector mount 50-5125 $64.95 Evolution Debris Deflectors with Triple

Clamp Mounts Silver

www.enduroeng.com • 517-393-2421

$12.95

Handlebar End Inserts

A

Evolution Roost Deflectors

Made of durable Polypropylene, this injection molded deflector is the perfect mate to our aluminum Debris Deflector. Comes complete with all the necessary mounting hardware and are sold in pairs. Installation is quick and easy with nylon mounting straps with molded in nylock nuts. No drilling or tapping needed.

51-120 51-121 51-123 51-124 51-125 51-126 51-127 51-128 51-129

B

$24.95 $24.95 $24.95 $24.95 $24.95 $24.95 $24.95 $24.95 $24.95

White Plastic outer mount Roost Deflectors Clear Plastic outer mount Roost Deflectors Blue Plastic outer mount Roost Deflectors Black Plastic outer mount Roost Deflectors Orange Plastic outer mount Roost Deflectors Red Plastic outer mount Roost Deflectors Black/Orange Plastic outer mount Roost Deflectors Yellow Plastic outer mount Roost Deflectors Green Plastic outer mount Roost Deflectors

Evolution Clamps

50-131B

$42.95 Black Evolution Clamps Neken 2010 for stock 2010 KTM 400-530 XCF-W, 200 XCW, and 150 XC models Silver Evolution Clamps Neken for stock 2010 KTM 400-530 XCF-W, 200 XCW, and 150 XC models Silver Evolution Clamps 7/8” Black Evolution Clamps 7/8” Silver Evolution Clamps Pro Taper Brand(Except EVO ProTaper) Black Evolution Clamps Pro Taper Brand(Except EVO ProTaper) Silver Evolution Clamps Magura Black Evolution Clamps Magura Evolution Clamps Renthal/Neken/EVO Pro Taper 2010 YZ/YZF Sliver Evolution Clamps Renthal/Neken/EVO Pro Taper 2010 YZ/YZF Black

50-131S $39.95

50-132S $39.95 50-132B $42.95 50-135S $39.95 50-135B $42.95 50-136S $39.95 50-136B $42.95 50-137S $39.95 50-137B $42.95

C

A

Contoured

Evolution Debris Deflectors are contoured to follow the natural bend of the handlebar.

More Room

B

Evolution clamps give you more room for cables/hoses.

Evolution Debris Deflectors

Made of top quality 6061-T6 aluminum these Debris Deflectors offer a wide radius bend for more lever room. All hardware is included for ease of installation and zinc plated for durability. Debris Deflectors attach with our new “U” clamps for added cable/hose clearance.

50-5125 50-5131S

$64.95 Silver Evolution w/ Triple Clamp Mounts $59.95 Silver w/Evolution Clamps 2010 Neken for stock 2010 KTM 400-530 XCF-W, 200 XCW, and 150 XC models 50-5131B $67.95 Black w/Evolution Clamps 2010 Neken for stock 2010 KTM 400-530 XCF-W, 200 XCW, and 150 XC models 50-5132S $59.95 Silver w/Evolution Clamps Std 7/8” 50-5132B $67.95 Black w/Evolution Clamps Std 7/8” 50-5135S $59.95 Silver w/Evolution Clamps Pro Taper(Except EVO ProTaper) 50-5135B $67.95 Black w/Evolution Clamps Pro Taper(Except EVO ProTaper) 50-5136S $59.95 Silver w/Evolution Clamps Magura 50-5136B $67.95 Black w/Evolution Clamps Magura 50-5137S $59.95 Silver Debris Deflectors w/Evolution Clamps Renthal/Neken/

EVO Pro Taper/2010 YZ/YZF 50-5137B $67.95 Black w/Evolution Clamps Renthal/Neken/

EVO Pro Taper 50-5137B $67.95 Black Debris Deflectors w/Evolution Clamps

Renthal/Neken/EVO Pro Taper/2010 YZ/YZF 50-6006 $67.95 Black w/Evolution Clamps Renthal Twin Wall

D

C

New laser engraved debris deflector

We now offer Custom Laser Etched Debris Deflectors. Call for details.

Standard Debris Deflectors & Clamps

50-032S 50-032B 50-033 50-033S 50-034 50-035S 50-035B 50-036S 50-036B 50-037S 50-037B 50-4032S 50-4032B 50-4032M 50-4035S 50-4035B 50-4035M 50-4036S 50-4036B 50-4037S 50-4037B

$19.95 $19.95 $9.95 $12.95 $7.95 $29.95 $29.95 $29.95 $29.95 $29.95 $29.95 $39.95 $45.95 $39.95 $49.95 $55.95 $49.95 $49.95 $55.95 $49.95 $55.95

Silver Complete 7/8 clamp set Black Complete 7/8 clamp set Taper lock set Taper lock set for Steel Handlebars Debris Deflector Fastener Assortment Silver Complete Protaper clamp set Black Complete Protaper clamp set Silver Complete Magura/Tag clamp set Black Complete Magura/Tag clamp set Silver Complete Renthal/Neken/EVO Pro Taper/ 2010 YZ/YZF clamp set Black Complete Renthal/Neken/EVO Pro Taper/ 2010 YZ/YZF clamp set Silver 7/8” Debris Deflector set w/hardware Black 7/8” Debris Deflector set w/hardware Mini Silver 7/8” Debris Deflector set w/hardware Protaper Fat Bar Silver Debris Deflector set w/hardware(Except EVO ProTaper) Protaper Fat Bar Black Debris Deflector set w/hardware(Except EVO ProTaper) Mini Protaper Fat Bar Silver Debris Deflector set w/hardware Magura/Tag Silver Debris Deflector set w/hardware Magura/Tag Black Debris Deflector set w/hardware Rentha/Neken/EVO Pro Taper/ 2010 YZ/YZF Silver Debris Deflector set w/hardware Renthal/Neken/EVO Pro Taper/ 2010 YZ/YZF Black Debris Deflector set w/hardware

D

www.enduroeng.com • 517-393-2421

KTM Accessories more

E3 Series Exhaust Systems

The secret is out! The E3 exhaust system is an easy way to get the most from your KTM. This system adds snap off the bottom, and smoothes out the power band without sacrificing top end performance. It was developed from the ground up for off-road use. The sharp black finish gives it a “Works” look and at the same time adds durability. The pipe is also interchangeable with the stock silencer.

Our performance silencer features a two piece billet aluminum end cap that houses a removable screen type spark arrestor. Install the screen to be forest legal or remove the screen for closed course competition. It is also lighter saving almost 2.5lbs over the stock silencer. With the help of Bristol Core cartridge type muffler packing, the silencer is rated to be at or below the 94db requirement.

The E3 silencer is interchangeable with the stock pipe.

Cole Kirkpatrick ’04-’10 KTM Comfort Complete Seats

40-045 40-145 40-146 40-147

$219.95 $149.95 $9.95 $19.95

Exhaust Pipe 2004-2010 250/300 2-stroke E3 Silencer w/ Removable spark arrestor 1998-2010 200-300cc 2-stroke Replacement screen for spark arrestor E3 Silencer replacement end cap

Our complete seats are manufactured right here in the USA. They offer all day riding comfort with a redesigned shape that features a wider top surface and larger radius edges. This combined with our use of injected molded memory foam, will give you the most support of any seat on the market. Seats are available in standard height and tall versions.

75-100 75-200 75-300 75-400 75-108 75-208 75-308 75-408

$129.95 $129.95 $129.95 $129.95 $129.95 $129.95 $129.95 $129.95

Standard Soft EE complete seat KTM 2004-07 (except 2007 sx/sxf) Tall Soft EE complete seat KTM 2004-07 (except 2007 sx/sxf) Standard Super soft EE complete seat KTM 2004-07 (except 2007 sx/sxf) Tall Firm EE complete seat KTM 2004-07 (except 2007 sx/sxf) Standard EE Complete seat KTM 2007 SX/SXF, 2008-2010 all 125-530cc Tall Soft EE Complete seat KTM 2007 SX/SXF, 2008-2010 all 125-530cc Standard Soft EE Complete seat KTM 2007 SX/SXF, 2008-2010 all 125-530cc Tall Firm EE Complete seat KTM 2007 SX/SXF, 2008-2010 all 125-530cc

Replacement Foams and Covers for 1998-2010 KTM models

EE offers replacement seat foams and covers for 1998-2003 KTM models.

The foams are available in tall or standard height soft. We are also providing a foam installation service, please call for details.

7504-21-21 7501S 7531S 7502FS 7532S 7514-21-21 75-110 75-118 75-210 75-218

$44.95 $69.95 $69.95 $69.95 $69.95 $44.95 $44.95 $44.95 $44.95 $44.95

Std cover 1998-2003 (Universal/trim to fit most all models) Std soft seat foam 1998-2002 E/XC-M/XC Std soft seat foam 2002-03 SX 2003 EXC Tall soft seat foam 1998-2002 E/XC 1998-2003 M/XC Tall soft seat foam 2002-03 SX 2003 EXC Tall cover 1998-2003 (Universal/trim to fit most all models) Std cover 2004-07 (except SX/SXF models) Std cover 2007 SX/SXF, 2008-2010 KTM all 125-530cc Height Tall cover 2004-07 (except 2007 SX/SXF) Tall cover 2007 SX/SXF, 2008-2010 all 125-530

Silencer Re-Packing Cartridges

Restore lost power and keep the decibels in check when you repack your silencer with Bristol Core cartridges. This drop & load solution eliminates the hassle and mess of the wrapping and taping of conventional muffler packing. In addition, the pre-wrapped cartridge ensures even coverage in the entire silencer for maximum performance.

SS-D1-0016 SS-D1-0017 SS-D1-0018 SS-E1-0115 SS-D1-0045

www.enduroeng.com • 517-393-2421

$19.95 $23.95 $23.95 $23.95 $19.95

Silencer Packing Cartrige OEM 1998-2005 E/XC,M/XC 200-380 Silencer Packing Cartrige OEM 2006-2010 XC-W 200-300 Silencer Packing Cartrige OEM 2006-2010 XC 200-300 Silencer Packing Cartrige OEM 2000-2010 250F/400/450/530 XCF-W,E/XC,M/XC Silencer Packing Cartridge E3 Silencer KTM

Carbon Fiber Exhaust Pipe Guards

4-Stroke Silencer Guards

Tired of burning your pants & boots on the KTM Four-Stroke exhaust?

Solve that problem with this bolt on aluminum guard. Mounting hardware included.

Protect your expensive exhaust system from damage with this tough carbon fiber pipe guard. All mounting hardware is included.

11-060 $34.95 2000-03 250-525 except 2003 450SX 11-061 $34.95 2004-07 250-525 except 2007 sxf 11-062 $34.95 2007-2010 SXF 2008-2010 250-530cc All

11-550 $139.95 2006-2010 KTM 200 xc/ xcw 11-700 $139.95 2003-2010 KTM 250SX 2004-2010 250/300EXC-MXC-XC-XCW 11-745 $139.95 E3 Pipe Guard

Aluminum Skid Plates

Protect your bike’s vulnerable underside from rocks and logs with these light weight and durable skidplates. Skidplates come complete with all the necessary mounting hardware.

24-064 24-066 24-067 24-075 24-076 24-176 24-077

$84.95 $84.95 $84.95 $84.95 $84.95 $84.95 $84.95

2004-2010 125/144/150/200 2004-07 400/450/525 (except 2007 sxf) 2006-07 250xcf/xcf-w 2004-2010 250/300 2stroke 2008-2010 400/450/530 xcf-w/exc 2007-2010 450,505 SXF 2008-2010 450,505 XCF 2008-2010 250sxf/xcf/xcf-w

Clutch Cylinder Protectors Radiator Braces

Saves your slave cylinder and engine case if you throw a chain or fall on a rock. Offers great peace of mind.

11-100 11-101 11-108 11-200

13-090 13-091 13-092 13-093 13-094 13-095 13-096 13-097 13-098

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow $94.95 $94.95 $94.95 $94.95

2000-05 2-stroke 2006-07 2-stroke also fits 07’ 250F xc/xcw 2008-2010 All 125-530cc 2001-07 400/450/525 4-Stroke

$34.95 $34.95 $29.95 $34.95 $29.95 $39.95 $39.95 $39.95 $39.95

1999-2007 125/200 2 piece 1999-2005 250/300/380 2 piece 2000-07 400/450/520/525 except 2007 EXC/SXF models 2006-07 250/300 2 piece 2007 250xcf/xcf-w 2007 EXC 450/525 w/14tooth sprocket 2008-2010 125/144/150/200 models 2008-2010 450/505 sxf,xcf 2008-2010 250/300xc,xc-w,sx 400/450/530 xcr-w,exc 2008-2010 250xcf,xcf-w,sxf

Electronic Odometer Guard

Protect your KTM odometer from crashes and debris using this billet aluminum guard. It features a built in bracket for the headlight switch and it allows you to use the forward handlebar mount on the triple clamp.

16-031 $69.95 2005-2010 (Except 2007-2010 EXC)

www.enduroeng.com • 517-393-2421

KTM Accessories PDS Progressive/ Straight Rate WP Shock Springs-

35-PDS5 thru 35-PDS10 $130.00 PDS 5,6,7,8,10 260mm 35-066 thru 35-096 $104.95 6.6,6.9,7.2,7.6,8.0,8.4,8.8,9.2,9.6 Straight Rate Shock Springs

43mm WP Fork Springs 36-038 thru 36-050 $104.95

.38,.40,.42,.44,.46,.48,.50 43mm

48mm WP Fork Springs

36-136 thru 36-150 $104.95 .36,.40,.42,.44,.46,.48,.50 48mm 2003-07 KTM WP forks, except 2007 SX models Also fits 2008-2010 XC-W/XCF-W/EXC models

48mm Fork Springs for twinchamber SX models

37-138 thru 37-146 $104.95 .38,.40,.42,.44,.46 48mm KTM 2007-2010 SX models, 2008-2010 200 xc models

48mm Fork Springs for twinchamber XC models

38-138 thru 38-150 $104.95 .38,.40,.42,.44,.46,.48,.50 48mm KTM 2008-2010 XC models (except 200xc)

Bar Risers kit


The Enduro Engineering bar riser kit lets you simply raise your handlebars, from 5-30mm depending on what interlocking 6061 aluminum CNC machined pieces you choose.

AXLE PULLS

Make wheel maintenance a breeze with this time saver. Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tire.

23-002 $39.95 Bar Riser Kit 5-30mm fits 2000-2010 85-530cc

48mm WP Fork Seals and Dust Wipers

23-055 $19.95 Front Axle Pull 2003-2010 125-530cc 23-056 $19.95 Rear Axle Pull 2000-2010 125-530cc

36-011 $12.95 Fork Oil Seal 48mm WP sold individually 36-014 $12.95 Fork Dust Wiper 48mm WP sold individually

Suspension

Full line of suspension parts and services available for your KTM. See the back page of the catalog or call for details regarding suspension work.

GPR Steering Stabilizers

Increase your stamina and confidence by reducing head shake and arm pump. Cut down your lap times or go faster in the woods. You can go from one to eight without backing down the rotation. Each kit comes with stabilizer bar mount, bolt on tower and hardware. Please specify color and handlebar size when ordering. We also now offer the version 4.0 which positions the stabilizer out of the way underneath the bar mounts.

28-001OR 28-003 28-005 28-009 28-081BK 28-081OR 28-082BK 28-084OR 28-089 28-090

Russell Bobbitt www.enduroeng.com • 517-393-2421

$449.95 $495.00 $69.95 $59.95 $449.95 $449.95 $495.00 $495.00 $59.95 $59.95

Version 1 Orange Oversize Bars 2000-07 (except 2007 sx/sxf) Version 2 Black 2000-07 (except xc/sx/sxf) Version 1 Fat bar Mount 2001-2010 Version 1 Post Mount 1997-2007 (except 2007 sx/sxf) Version 1 Black 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w Version 1 Orange 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w Version 2 Black KTM 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w Version 4 Orange 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w Version 1 Post Mount 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w Version 2 Post Mount 2007-2010 sx/sxf and 2008-2010 xc/xcf/xc-w/xcf-w

Frictionless Chain Guide Block by BRP

These “Frictionless” Chain Guide Blocks are CAD designed and CNC machined using UHMW-PE composite material. Thanks to its extremely low coefficient of friction (0.14), outstanding abrasion resistance, superior impact resistance, and self-lubricating properties, UHMW-PE is ideal for getting you through the gnarly stuff. Outlasting OEM chain guides, while offering a practically frictionless guide and unbelievable protection for your chain and sprocket.

The BRP Guide Block is able to absorb a hit without bending like the stock aluminum chain guard. Two-piece design easily replaces the OEM chain guide.

19-107 $69.95 BRP Chain Guide 1994-2007 125-525cc Except 2007 SX/SXF 19-108 $69.95 BRP Chain Guide 2008-2010 125-530cc(07’ SX/SXF),

Brake Pads

Replace your worn out brake pads and rotors with Galfer quality replacements.

Available in both Semi Metallic & Full Metallic compounds.

What’s the difference between semi metallic & full metallic? Full metallic pads are designed for maximum wear. Great for muddy conditions.

Semi metallic pads are designed for better pedal feel, lower temperatures and a more progressive braking response, but the life span of the pad is shorter.

17-060 17-073

Ultra Disc Guard with Complete Carrier

17-074

Protect your expensive rear brake rotor with this disc guard. Replaces the entire brake carrier for superior strength and features a replaceable fin.

17-075 17-076 17-077

13-044 $59.95 1996-2003 Rear Disc guard Wrap Around 13-045 $94.95 Rear disc guard complete carrier 2004-2010 All 125-530cc, 13-051 $24.95 Replacement Fin

17-078

Rekluse Z-Start Pro/EXP Clutch Kits

The Z-Start Pro offers unique benefits as a high-end complement to Rekluse industry-leading Z-Start Clutch.

The Z-Start Pro offers features which directly benefit pro-level riders, motocross riders, and any motorcycle or ATV rider.

The Rekluse Core EXP Clutch consists of a center clutch, a matched set of steel drive plates, springs, an EXP friction disk and an EXP pressure plate. All Rekluse Core Clutches work with your bike’s stock friction disks or Rekluse friction disks. One of the primary benefits to the Rekluse Core Clutch is the ability to change from anti-stall mode (Core EXP Clutch) to manual mode (Core Clutch) in a matter of minutes.

RMS-830A RMS-832 RMS-833 RMS-836 RMS-837 RMS-838A RMS-7730 RMS-7732 RMS-7736

$599.00 $599.00 $599.00 $599.00 $599.00 $599.00 $799.00 $799.00 $799.00

2008-09 450,505 XCF 2007-2010 SXF 2008-2010 400-530 EXC,XCRW 2003-07 all RFS Motors 2004-2010 250,300 2stroke 1998-2010 125-200 2006-2010 250 SXF,XCF,XCF-W 2007 SXF 450,505 2008-2010 SXF,XCF 450,505 2008-2010 EXC,XCFW 400-530 2004-2010 SX,XC 250,300

$10.95 Pedal Anchor Kit $27.95 Front brake pads Full Metallic 1994-2010 All 125-530cc, $27.95 Front brake pads Semi Metallic 19942010 All 125-530cc, $27.95 Rear Brake pads Full Metallic 1996-2003 125-525cc Except 2003 sx, $27.95 Rear Brake pads Semi Metallic 19962003 All 125-525cc Except 2003 sx $27.95 Rear Brake pads Full Metallic 2004-2010 (2003 sx) All 125-530cc $27.95 Rear Brake Pads Semi Metallic 20042010 (2003 sx) All 125-530cc,

Sprockets

We have a variety of sprockets available for your KTM. Heavy duty steel front sprockets and light weight aluminum for the rear.

20-013 $16.95 JT 13 Tooth Counter Shaft Sprocket 1998-2010 125-530cc, 20-014 $16.95 JT 14 Tooth Counter Shaft Sprocket 1998-2010 125-530cc, 20-048 $44.95 JT 48 Tooth Rear Sprocket 1991-2010 125-530cc 20-050 $46.95 JT 50 Tooth Rear Sprocket 1991-2010 125-530cc 20-052 $46.95 JT 52 Tooth Rear Sprocket 1991-2010 125-530cc

EK Chains Sport Series O-Ring/ Quadra X-Ring Chain

Solid Rear Rotor

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain.

Also features four point pin riveting, solid bushings and rollers for longer chain life.

17-070 $119.95 Solid Rear Brake Rotor 1990-2010 All 125-530cc Rotor By Galfer

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

Add greater stopping power and better pedal feel. Your brake pads should last up to 3 times longer.

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

Front Wave Rotor

The Front Wave Rotor is an efficient design that uses all the brake pads surface evenly.

17-071 $103.85 Front Brake Rotor 1994-2010 All 125-530cc, Rotor By Galfer

www.enduroeng.com • 517-393-2421

KTM Accessories Vent Hose

Now get rid of that tangled vent hose and add a factory look with our billet one-way breather.

27-002 $14.95 Gas cap breather valve

Longer Throttle Cables

By Motion Pro

These high quality cables are 3 inches longer than stock. The extra length allows you to route the cables around the front of the triple clamp out of the way of your computer, steering dampener, etc.

15-080 $19.95 Longer Throttle Cable 2-Stroke 15-081 $34.95 Longer Throttle Cable 2000-02 KTM 4-stroke 15-082 $34.95 Longer throttle cable 2003-2010 KTM 4-stroke

Power Valve tool

Fine tune your 250 or 300 powervalve with our billet powervalve adjustment tool.

22-2002 $9.95 power valve adjustment tool

Clutch and Brake Lines

This rugged braided stainless steel hose will ensure solid clutch pressure every time. Also features an elbow fitting at the master cylinder to route around handguards. All necessary hardware is included.

Heim Joint Tool by Motion Pro

Removes and replaces KTM Heim joints, Enduro Engineering part # 16-098. Aligns Heim joint for easy installation. Built in stop correctly centers Heim joint in swing arm. Aligns and installs Heim joint seals. Anodized aluminum construction reduces the possibility of damaging your swing arm. Handle includes retention o-ring to hold Heim joint adaptors and Heim joint bearing in place. Ergonomic handle for a comfortable fit.

Made from billet 6061-T6 and anodized Motion Pro blue. Laser engraved Motion Pro logo. Original Motion Pro design.

22-098

Clutch Hose

$54.99 Motion Pro Heim Joint Tool

15-070 $39.95 KTM 1999-2010 125/144/150/200 Clutch Hose 15-071 $39.95 KTM 1999-2005 250/300/380 Clutch Hose 15-072 $39.95 KTM 2000-2010 400-530cc 2006-2010 250/300 2007-2010 250xcf/xcf-w Clutch Hose also fits 2003-09 200-300cc GasGas models

Rear Brake Hose

15-090 $39.95 1990-2003 (except 03’ sx) 15-091 $39.95 2003 SX 125-525cc, 2004-2010 125-530cc

Front Brake Hose

15-095 $59.95 Long 2000-2010 EXC/MXC/XC/XC-W, 15-096 $59.95 Short SX 2000-2010,

Mechanical ODO Cable

Replace your broken odo cable with this inexpensive alternative.

15-060 $15.95 1998-2002

KTM Fork Cap Removal Tool

Make fork cap removal a snap on the 48mm WP SX forks with this handy socket. Works with a 1/2 inch socket wrench. Works on WP fork caps with preload adjusters.

KTM Spoke Wrench

Hard anodized handle with a replaceable tip. This is a must for every KTM riders tool box.

22-4002 $17.95 7.0mm Spoke wrench KTM 1990-2010 All 125-640cc,

22-1001 $22.95 2002-06 sx, 2006-07 xc, 2008-2010 xc-w

Electronic Sensor Wire and Magnet

Running an electronic odo/speedo? This magnet & sensor wire are great to keep as spares or outfit your new bike. Works with enduro timing equipment as well.* (Note: may have to change connectors to fit certain equipment) 16-040 $12.95 Odo Magnet Kit Stock 16-041 $39.95 Electronic Odometer sensor wire Threads into stock brake carrier 16-043 $31.95 OEM sensor wire 2003-04 16-044 $49.99 OEM Odometer Sensor Wire 2005-2010

ReplacementThrottle Tubes

We offer throttle tubes that feature a pop-out end cap to allow easy installation of debris deflectors.

15-084 $15.95 1996-2010 2Stroke 15-085 $15.95 2000-2010 4Stroke

Twin Chamber Fork cartridge holder Tool Take the hassle out of disassembling twinchamber forks with this simple tool.

22-350 $12.95

Billet Shock Spanner Wrench

At last a spanner wrench that makes adjusting your KTM/PDS shock a breeze. Designed to loosen or tighten the shock adjusting collar without having to get out that damaging punch.

22-300 $24.95

www.enduroeng.com • 517-393-2421

All PDS shocks with single adjusting collar.

Oil Filters

Lower Heim Joint Kit

We offer these high quality replacement filters for your KTM 4 stroke.

With KTM’s linkless rear suspension the main point of wear in the swingarm is the lower Heim joint that connects the shock to the swingarm. This is a common wear item. Our kit comes complete with bushing, seals and spacers.

18-155 $5.50 Hi-Flo Oil Filter 2000-07 400/450/520/525 (Long) (except 2007 450 sxf) 18-156 $7.95 Hi-Flo Oil Filter (Spin On) 1997-2002 LC4 motor 18-157 $5.50 Hi-Flo Oil Filter 2000-07 400/450/520/525 (Short) (except 2007 450 sxf) 18-655 $5.50 Hi-Flo Oil filter 2006-2010 KTM 250 XCF/SXF/ XCF-W 18-755 $5.60 Hi-Flo Oil filter KTM 2008-2010 450/505/530 SXF/ XCF/EXC/XCRW,

16-098 $29.95 Heim Joint Bearing Kit 1998-2010 125-530cc,

Wheel Bearings and Spacers

Enduro Engineering offers a great selection of replacement spacers, bearings and seals. The spacers are hard anodized for longer wear. These bearings and seals are an economical replacement to the expensive stock ones.

Air Filters

We now offer a high quality replacement air filter for your KTM. The dual element design keeps the dirt out.

Great for a spare on those long weekends.

18-200 $23.95 Hi-Flo Air Filter 2001-07 4stroke, 2004-07 2stroke (except 2007 sx/sxf) 18-210 $23.95 Hi-Flo Air Filter 2007 SX/SXF 2008-2010 All 125-530cc

Trail Tech Endurance Odometer

16-050 $18.95 Rear Wheel Spacer kit KTM 1990-2010 125-530cc, 16-061 $54.95 Rear Wheel Spacers/Bearings/Seals Upgrade w/larger bearings 1990-2010 125-530cc, 16-080 $14.95 Speedo Drive Eliminator 17mm ID KTM 93-99’, Husqvarna 95-99’,

Honda 93-00’ XR600, 96-00’ XR400 16-082 $14.95 Speedo Drive Eliminator 20mm ID KTM 00-02’, 00-02’ Husaberg 16-083 $19.95 Front Wheel Spacer Set 26mm KTM 2003-2010 125-530cc, 16-085 $7.95 Left Side Front Wheel Spacer KTM 00-02’ 16-090 $55.50 Front Wheel Spacer/ Bearing/Seal Kit KTM EXC/MXC 2000-02 16-091 $52.95 Front Wheel Spacer/Bearing/Seal Kit KTM SX 2000-02 16-092 $55.50 Front Spacer/ Bearing/Seal Kit KTM 2003-2010 All 125-530cc,

Endurance is perfect as an OEM replacement speedo or as a special application addition. The no contact magnetic speed sensor can be adapted to any machine with a wheel. Endurance’s time keeping and distance measurements make it an essential off-road digital gauge.

27-020 27-100

$49.95 $79.95

Universal Endurance Mount Odometer 2000-2010 125-530cc,

Replacement Clutch and Brake Levers for KTM By Motion Pro 23-103 $24.90 Clutch lever w/bearing Magura master cylinder 23-104 $15.90 Front Brake lever KTM 2005-2010 125-530cc, 23-105 $43.90 Clutch lever for Brembo master cylinder

Magura Replacement parts 23-004 23-007 23-008 23-009 23-010 23-011 23-012

$5.95 Magura Clutch adjuster knob $12.95 Magura Decompression lever $26.95 Magura 4-stroke cover with decomp mount $10.95 Magura Pivot screw kit $24.00 Magura Hydralic Clutch Bleeder Kit $139.95 9.5 Magura Replacement Master Cylinder $168.00 9.0 Magura Replacement Master Cylinder

www.enduroeng.com • 517-393-2421

KTM Accessories

HUSABERG Accessories KTM Off-Road Lighing Kit

We now have lighting kits for your 2006-’10 XC/XCW’s. The lighting kits are all assembled and ready to bolt on in just minutes. Each kit comes with a headlight, tail light, wiring and the proper KTM fasteners to make installation easy. Keep the clean factory look on your bike with our sano kit. Note: This kit is for off-road use only and is not DOT approved.

30-700 $219.95 2006-07 200/250/300 XC 30-701 $229.95 2008 250/300 XC, 2008-09 200 XC 30-800 $199.95 2006-07 200-525 XC-W/XCF-W, 2007 250/450/525 XCF 30-801 $209.95 2008-2010 200-530cc XC-W/XCF-W, 2009-2010 250/300 XC Also fits 2008-2010 250XCF

License Plate Holder

This holder is made of tough plastic and comes with all the necessary hardware for mounting. The holes are pre drilled to line up perfectly with ’04-’10 KTM EXC rear fenders, all Enduro Engineering Off-Road Lighting Kits, and they will also adapt to almost any off-road rear fender.

22-700 $14.95 License plate holder

Nick Fahringer Clutch Cylinder Protectors

Saves your slave cylinder and engine case if you throw a chain or fall on a rock. Offers great peace of mind.

13-099

$39.95 2009-2010 390/450/570

Rear Fender Rack

A must have for the dual sport and long distance off-road rider. This billet rack set in a stainless steel wire frame is strong and light, the plated finish will keep yours looking great for years. Each rack is supplied with complete instructions and all the necessary stainless steel hardware for easy installation.

22-800 $199.95 2008-2010 125-530cc models 22-804 $199.95 2004-07 125-530cc except SX/SXF models

Sprocket fastening kit

Designed to fit all KTM dirt bikes, contains six Grade 10 steel sprocket bolts and six fuji-style metal locking nuts 18-500 $9.95 Sprocket bolt kit

Rear Brake Light switch for KTM

No more hacking and splicing. These hydraulic rear brake light switches simply plug into the stock KTM wiring harness and your ready to go.

30-101 ’98-’06 KTM EXC, ’06-’10 XC-XCW, will also work with EE off-road lighting kit

Front /Rear Brake Hose 15-091 $39.95 Rear Brake Hose 2009-2010 390/450/570 15-095 $59.95 Front Brake Hose(long) 2009-2010 390/450/570 15-096 $59.95 Front Brake Hose(short) 2009-2010 390/450/570

Replacement Throttle Tube

We offer throttle tubes that feature a pop-out end cap to allow easy installation of debris deflectors.

15-085 $15.95 Replacement Throttle tube

2009-2010 390/450/570

Rekluse Z-Start Pro/EXP Clutch kits RMS-826 $599.00 RMS-827 $599.00 RMS-7727 $799.00

Replacement fastener kits

50 piece fastener replacement kit Great to keep in the tool box or use to dress your ride up.

18-300 $19.95 Euro Style bolt kits

HI LO Wiring Kit for KTM

We have taken the hassle out of wiring your KTM up for dual sport or enduro use. Each hi low kit comes with the necessary wiring to give your KTM a high/low headlight using the stock light switch. Equipped with high quality connectors on one end and the hard to find stock connectors on the other. Each wire is clearly labeled for easy installation.

30-400 $12.95 4 00/450/525/300 EXC 2005-06 also works w/EE pt# 30-800, 30-801 30-500 $19.95 200/250 EXC 2005-06 also works w/EE pt# 30-700, 30-701

www.enduroeng.com • 517-393-2421

Z-Start Pro Clutch 2004-08 400-550cc Z-Start Pro Clutch 2009-2010 390/450/570 EXP Clutch FE 450/570 2009

Sprockets

We have a variety of sprockets available for your Husaberg. Heavy duty steel front sprockets and light weight aluminum for the rear.

20-013

Bar Risers kit

The Enduro Engineering bar riser kit lets you simply raise your handlebars. from 5-30mm depending on what interlocking 6061 aluminum CNC machined pieces you choose.

23-002 $39.95 5-30mm fits 2009-2010 390/450/570

Frictionless Chain Guide Block by BRP The BRP Guide Block is able to absorb a hit without bending like the stock aluminum chain guard. Two-piece design easily replaces the OEM chain guide 19-108 $69.95 2009-2010 390/450/570

AXLE PULLS

Make wheel maintenance a breeze with this time saver. Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tire.

23-055 $19.95 Front 2009-2010 390/450/570 23-056 $19.95 Rear 2009-2010 390/450/570

Spoke Wrench

Hard anodized handle with a replaceable tip. This is a must for every Husaberg riders tool box.

Ultra Disc Guard with Complete Carrier

Oil Filter 18-755 $5.60 2009-2010 390/450/570

Replacement fastener kits

50 piece fastener replacement kit Great to keep in the tool box or use to dress your ride up.

18-300

$19.95 Euro Style bolt kits

Radiator Braces

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow 11-120 $94.95 2009-2010 390/450/570

20-052

EK Chains Sport Series O-Ring/ Quadra X-Ring Chain

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain. Also features four point pin riveting, solid bushings and rollers for longer chain life.

13-045 $94.95 Complete carrier

2009-2010 390/450/570 13-051 $24.95 Replacement Fin

Brake Pads

Removes and replaces Heim joints, Enduro Engineering part # 16-098. Aligns Heim joint for easy installation.

Built in stop correctly centers Heim joint in swing arm.

Aligns and installs Heim joint seals.

27-020 $49.95 Universal Endurance Mount 27-100 $79.95 TrailTech Odometer 2000-2010

20-050

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

eim Joint Tool by H Motion Pro

Endurance is perfect as an OEM replacement speedo or as a special application addition. The no contact magnetic speed sensor can be adapted to any machine with a wheel. Endurance’s time keeping and distance measurements make it an essential off-road digital gauge.

20-048

Protect your expensive rear brake rotor with this disc guard. Replaces the entire brake carrier for superior strength and features a replaceable fin.

22-4002 $17.95 7.0mm 2009-2010 390/450/570

Trail Tech Endurance Odometer

20-014

$16.95 JT 13 Tooth Counter Shaft Sprocket 2009-2010 390/450/570 $16.95 JT 14 Tooth Counter Shaft Sprocket 2009-2010 390/450/570 $44.95 JT 48 Tooth Rear Sprocket 2009-2010 390/450/570 $46.95 JT 50 Tooth Rear Sprocket 2009-2010 390/450/570 $46.95 JT 52 Tooth Rear Sprocket 2009-2010 390/450/570

22-098 $54.99 Heim Joint Tool

Replacement Brake Levers

By Motion Pro

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

Replace your worn out brake pads and rotors with Galfer quality replacements. Available in both Semi Metallic & Full Metallic compounds.

17-073 17-074 17-077 17-078

$27.95 Front brake pads Full Metallic 2009-2010 390/450/570 $27.95 Front brake pads Semi Metallic 2009-2010 390/450/570 $27.95 Rear Brake pads Full Metallic 2009-2010 390/450/570 $27.95 Rear Brake Pads Semi Metallic 2009-2010 390/450/570

Solid Rear Rotor

Add greater stopping power and better pedal feel.

Your brake pads should last up to 3 times longer.

17-070 $119.95 Solid Rear 2009-2010 390/450/570

Front Wave Rotor

The Front Wave Rotor is an efficient design that uses all the brake pads surface evenly.

23-104 $15.90 Front Brake lever 2009-2010 390/450/570 17-071 $103.85 Front Rotor 2009-2010 390/450/570

Lower Heim Joint Kit

With linkless rear suspension the main point of wear in the swingarm is the lower Heim joint that connects the shock to the swingarm. This is a common wear item. Our kit comes complete with bushing, seals and spacers.

Suspension Services

Full line of suspension parts and services available for your Husaberg. See back page of catalog or call for details regarding suspension work.

PDS Progressive/Straight Rate WP Shock Springs

16-098 $29.95 2009-2010 390/450/570

35-PDS5 thru 35-PDS10 $130.00 PDS 5, 6, 7, 8, 10 260mm 35-066 thru 35-096 $104.95 6.6, 6.9, 7.2, 7.6, 8.0, 8.4, 8.8, 9.2, 9.6 Straight Rate Shock Springs

Wheel Bearings and Spacers

48mm WP Fork Springs-

Enduro Engineering offers a great selection of replacement spacers, bearings and seals. The spacers are hard anodized for longer wear. These bearings and seals are an economical replacement to the expensive stock ones.

16-050 $18.95 16-060 $44.95 16-061 $54.95

16-082 $14.95 16-083 $19.95 16-092 $55.50

Rear Wheel Spacer kit 2009-2010 390/450/570 Rear Wheel Spacers/Bearings/Seals 2009-2010 390/450/570 Rear Wheel Spacers/Bearings/Seals Upgrade w/larger bearings 2009-2010 390/450/570 Speedo Drive Eliminator 20mm ID 00-02’ Front Wheel Spacer Set 26mm 2009-2010 390/450/570 Front Spacer/ Bearing/Seal Kit 2009-2010 390/450/570

36-136/36-150 $104.95

.36, .38, .40, .42, .44, .46, .48, .50 48mm Fork Springs for 2009-2010 Husaberg 390/450/570 except 450FX

38-138/38-150 $104.95

.38, .40, .42, .44, .46, .48, .50 48mm Fork Springs Husaberg 2010 450FX

48mm WP Fork Springs for twinchamber FX models

HUSQVARNA Accessories

Bar Adjustment Kit


This kit allows you to fine tune your comfort level by raising or lowering your bar height 23-005

TE 310 Husqvarna Dirt Bike Test

$24.95

All models 2004-2010 5mm and 8mm

Ultra Disc Guard

Protect your expensive rear brake rotor with this disc guard.

Replaces the entire brake carrier for superior strength and features a replaceable fin.

13-030 $94.95

13-031 $94.95

2004-2010 4 stroke models(except 610cc) also fits 2009-2010 125 WR 2000-08 CR/WR 125/250/300 2009-2010 WR 250/300

Suspension

Full line of suspension parts and services available for your Husqvarna. See back page of catalog or call for details regarding suspension work.

Rear Shock Springs

35-256 $104.95 Rear Shock Spring 5.6kg 2004-2010 all models 35-258 $104.95 Rear Shock Spring 5.8kg 2004-2010 all models

Front Fork Springs 36-246 $104.95

36-248 $104.95

Fork Springs .46 50mm Open/Closed Chamber Marzocchi all TE/TXC/WR 2004-10 models Fork Springs .48 50mm Open/Closed Chamber Marzocchi all TE/TXC/WR 2004-10 models

Wheel Bearings and Spacers

The spacers are hard anodized for longer wear. These bearings and seals are an economical replacement to the expensive stock ones.

16-052 $18.95 16-062 $44.95

16-084 $9.95 16-093 $55.50 16-080 $14.95

Rear Wheel Spacer Kit 2001-2010 all models Rear Wheel Spacers/Bearings/Seals Kit 2001-2010 all models Front Wheel Spacer 2001-2010 all models Front Wheel Spacer/Bearing/Seal Kit 2001-2010 all models Speedo Drive Eliminator 17mm ID Husqvarna 95-99’

Brake Pads

Replace your worn out brake pads and rotors with Galfer quality replacements. Available in both Semi Metallic & Full Metallic compounds. What’s the difference between semi metallic & full metallic?

Full metallic pads are designed for maximum wear. Great for muddy conditions. Semi metallic pads are designed for better pedal feel, lower temperatures and a more progressive braking response, but the life span of the pad is shorter.

17-073 17-074 17-075 17-076 17-077 17-078

$27.95 Front brake pads Full Metallic 1995-2009 all models $27.95 Front brake pads Semi Metallic 1995-2009 all models $27.95 Rear Brake pads Full Metallic 1995-2003 all models $27.95 Rear Brake pads Semi Metallic 1995-2003 all models $27.95 Rear Brake pads Full Metallic 2004-09 4 stroke models only $27.95 Rear Brake Pads Semi Metallic 2004-09 4Stroke models only

Sprockets

Aluminum Skid Plates

Protect your bike’s vulnerable underside from rocks and logs with these light weight and durable skidplates. Skidplates come complete with all the necessary mounting hardware.

24-270 $84.95 Skidplate Husqvarna 2008-10 250/310/450/510 TE/TC/TXC except 2010 250 models 24-271 $84.95 Skidplate Husqvarna 1998-2002 2004-10 WR/CR 250/300/360 24-272 $84.95 Skidplate Husqvarna 2010 TC/TXC/TE 250

Trail Tech Endurance Odometer

Endurance is perfect as an OEM replacement speedo or as a special application addition. The no contact magnetic speed sensor can be adapted to any machine with a wheel. Endurance’s time keeping and distance measurements make it an essential off-road digital gauge.

27-020 27-100

$49.95 $79.95

Universal Endurance Mount 2008-2010 TXC 450/TE 610

We have a variety of sprockets available for your Husqvarna.

Heavy duty steel front sprockets and light weight aluminum for the rear.

20-213 20-214 20-250 20-252

$16.95 $16.95 $46.95 $46.95

JT Sprocket 13 Tooth 2001-2010 all 250-610cc JT Sprocket 14 Tooth 2001-2010 all 250-610cc JT Sprocket 50 Tooth 2001-2010 125-610cc JT Sprocket 52 Tooth 2001-2010 125-610cc

EK Chains Sport Series O-Ring/Quadra X-Ring Chain

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain. Also features four point pin riveting, solid bushings and rollers for longer chain life.

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

Oil Filter 18-563 $8.65 HI-Flo Oil Filter Husqvarna 4 stroke models

1997-2010 except 2010 250 TC/TXC/TE

Spoke Wrench Radiator Braces

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow 11-131

$94.95

Hard anodized handle with a replaceable tip. This is a must for every Husqvarna riders tool box.

22-4002 $17.95 7.0mm 2008-2010 125-610cc

Chain Guide Block

The BRP Guide Block is able to absorb a hit without bending like the stock aluminum chain guard. Two-piece design easily replaces the OEM chain guide.

19-130 $69.95

19-131 $69.95

2004-2010 4 Stroke models, 2009-2010 125 CR/WR 2000-08 CR/WR 125/250/300, 2009-2010 WR 250/300

All models 2004-2010 except 610cc

www.enduroeng.com • 517-393-2421

HONDA Accessories more

Aluminum Skid Plates

Protect your bike’s vulnerable underside from rocks and logs with these light weight and durable skidplates.

Skidplates come complete with all the necessary mounting hardware.

CRF-X 250 Honda Dirt Bike Test

24-670 $84.95 2004-09 CRF250X 24-671 $84.95 2005-09 CRF450X Replacement parts are available, call for details.

Wheel Bearings and Spacers

Axle Pulls

Make wheel maintenance a breeze with this time saver.

Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tire.

23-061 $19.95 Rear Axle Pull 2000-09

(Except 2009-10 CRF250R/450R) 23-050 $19.95 Front Axle Pull Handle Insert 2001-2010

Ultra Disc Guard with Complete Carrier

Protect your expensive rear brake rotor with this disc guard. Replaces the entire brake carrier for superior strength and features a replaceable fin.

13-061 $94.95 complete carrier 2003-2010

Enduro Engineering offers a great selection of replacement spacers, bearings and seals. The spacers are hard anodized for longer wear. These bearings and seals are an economical replacement to the expensive stock ones.

16-650 $18.95 16-660 $44.95

16-683 $19.95

16-684 $19.95 16-692 $55.50 16-693 $55.50 22-1002 $22.95

Rear Wheel Spacer Kit CR/CRF/CRFX 2000-2010 Rear Wheel Spacers/Bearings/Seals Kit CR/CRF/CRFX 2000-2010 Front Wheel Spacer Speedo Drive Eliminator Kit CRF-X 2004-09 Front Wheel Spacer Kit CRF/CR 2002-2010 Front Wheel Spacers/Bearings/Seals Kit CRF-X 2004-09 Front Wheel Spacers/Bearings/Seals Kit CR/CRF 2002-2010 Rear Wheel Bearing Collar removal/Seal Driver Tool 2000-2010

Handlebar Riser Mounts

Rekluse Z-Start Pro/EXP Clutch Kits

The Z-Start Pro offers unique benefits as a high-end complement to Rekluse industry-leading Z-Start Clutch. The Z-Start Pro offers features which directly benefit pro-level riders, motocross riders, and any motorcycle or ATV rider.

The Rekluse Core EXP Clutch consists of a center clutch, a matched set of steel drive plates, springs, an EXP friction disk and an EXP pressure plate. All Rekluse Core Clutches work with your bike’s stock friction disks or Rekluse friction disks. One of the primary benefits to the Rekluse Core Clutch is the ability to change from anti-stall mode (Core EXP Clutch) to manual mode (Core Clutch) in a matter of minutes.

RMS-812 RMS-819 RMS-7713 RMS-7714

$599.00 $599.00 $799.00 $799.00

The Enduro Engineering bar mount riser kit replaces your stock mounts, moving your handlebars 5/8” forward and 5/8” higher than stock.

Twin Chamber Fork cartridge holder Tool

Take the hassle out of disassembling twinchamber forks with this simple tool.

22-350 $12.95

23-601 $69.95 2000-07 CR 125/250/500 2004-2010 CRF/CRFX 250/450 7/8” Handlebar Riser Mounts 5/8” forward 5/8” riser 23-602 $69.95 2000-07 CR 125/250/500 2004-2010 CRF/CRFX 250/450 1 1/8” Handlebar Riser Mounts 5/8” forward 5/8” riser

Z-Start Pro Clutch CRF250X 2004-09 Z-Start Pro Clutch CRF450X 2005-09 EXP Clutch CRF450 2002-08 EXP Clutch CRF450 2009-2010

Radiator Braces

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow 11-160 11-161 11-163 11-164 11-165 11-166

$94.95 $94.95 $94.95 $94.95 $94.95 $94.95

2004-07 cr250 Radiator Brace 2004-09 crf/crfx 250 Radiator Brace 2005-08 crf 450 Radiator Brace 2005-09 crfx 450 Radiator Brace 2009-2010 CRF450R Radiator Brace 2010 CRF250R Radiator Brace

Replacement fastener kits Replacement Seat Foam & Covers 7560S $69.95 Std Seat Foam Honda CRFX250 2004-09 7560T $69.95 Tall Seat Foam Honda CRFX250 2004-09 7561S $69.95 Std Seat Foam Honda CRFX450 2005-09 7561T $69.95 Tall Seat Foam Honda CRFX450 2005-09 7504-21-21 $44.95 Std seat cover KTM 1998-2003

(Universal/trim to fit most all models) 7514-21-21 $44.95 Tall seat cover KTM 1998-2003

(Universal/trim to fit most all models)

54 piece fastener replacement kit. Great to keep in the tool box or use to dress your ride up.

18-400 $15.95 Jap Style bolt kits

Sprocket fastening kit

Designed to fit all Honda dirt bikes, contains six Grade 10 steel sprocket bolts and six fuji-style metal locking nuts 18-500

$9.95

YAMAHA Accessories Sprockets

We have a variety of sprockets available for your Honda. Heavy duty steel front sprockets and light weight aluminum for the rear.

20-613 20-6113 20-6114 20-648 20-651 20-653

$16.95 $16.95 $16.95 $44.95 $46.95 $46.95

JT Sprocket 13 Tooth Honda 2004-10 CRF/CRFX 250 2004-07 CR 125 JT Sprocket 13 Tooth Honda 2002-10 CRF/CRFX 450 1988-2008 CR 250 JT Sprocket 14 Tooth Honda 2002-10 CRF/CRFX 450 1988-2008 CR 250 JT Sprocket 48 Tooth Honda 1984-2010 CR 125/250 2002-2010 CRF/CRFX 250/450 JT Sprocket 51 Tooth Honda 1984-2010 CR 125/250 2002-2010 CRF/CRFX 250/450 JT Sprocket 53 Tooth Honda 1984-2010 CR 125/250 2002-2010 CRF/CRFX 250/450

EK Chains Sport Series O-Ring/ Quadra X-Ring Chain

Aluminum Skid Plates

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain. Also features four point pin riveting, solid bushings and rollers for longer chain life.

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

Protect your bike’s vulnerable underside from rocks and logs with these light weight and durable skidplates. Skidplates come complete with all the necessary mounting hardware.

Matt Bucher

24-570 $84.95 2007-09 WR250F 24-571 $84.95 2007-09 WR450F 24-572 $84.95 2005-2010 YZ 250

Brake Pads

Replace your worn out brake pads and rotors with Galfer quality replacements. Available in both Semi Metallic & Full Metallic compounds.

17-088 $27.95 Rear Brake Pads 2003-2010 CR/CRF 17-083 $27.95 Front Brake Pads 2003-2010 CR/CRF

Frictionless Chain Guide Block by BRP The BRP Guide Block is able to absorb a hit without bending like the stock aluminum chain guard. Two-piece design easily replaces the OEM chain guide.

19-160 $69.95 2008-2010 CRFX 450 2007-2010 CRF 250R/250X/450R

Oil/Air Filters

We now offer high quality replacement oil and air filters 18-116 $3.75 Hi-Flo Oil Filter 2004-2010 CRF/CRFX 250/450 18-1018 $23.95 Hi-Flo Air Filter 2003-2010 CRF/CRFX 250/450

except 2010 CRF250

Suspension

Full line of suspension parts and services available for your Honda. See back page of catalog or call for details regarding suspension work.

Radiator Braces

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow 11-150 $94.95 11-151 $94.95

11-152 $94.95

11-153 $94.95 11-154 $94.95 11-155 $94.95 11-156 $94.95

2005-2010 yz250 Radiator Brace 2000-05 yz250f/05-06 wr250f Radiator Brace 2003-05 yz450f/05-06 wr450f Radiator Brace 2006 yz250f/450f Radiator Brace 2007-09 yzf/wr 450/250 Radiator Brace 2010 YZF250 Radiator Brace 2010 YZF450 Radiator Brace

AXLE PULLS

Make wheel maintenance a breeze with this time saver. Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tire.

23-050 $19.95

23-051 $19.95

23-061 $19.95

Front Axle Pull Handle Insert Yamaha 2003-10 Rear Axle Pull Yamaha 2003-10 125/250/450 except 2009-2010 YZF Rear Axle Pull Yam 2009-2010 YZF

Ultra Disc Guard with Complete Carrier

Protect your expensive rear brake rotor with this disc guard. Replaces the entire brake carrier for superior strength and features a replaceable fin.

13-052 $94.95

13-053 $94.95

13-054 $94.95

13-055 $94.95

Rear disc guard complete carrier 2003-04 Rear disc guard complete carrier 2005 Rear disc guard complete carrier 2006-2010 125-450 YZ,YZF,WR (Except 2009-2010 YZF) Rear disc guard complete carrier 2009-2010 YZF 250,450

www.enduroeng.com • 517-393-2421

YAMAHA Accessories Brake Pads

Replace your worn out brake pads and rotors with Galfer quality replacements Available in both Semi Metallic & Full Metallic compounds.

Replacement Seat Foam & Covers

7550S $69.95 7550T $69.95 7551S $69.95 7551T $69.95 7504-21-21 7514-21-21

Std Seat Foam 2007-09 WR250/450F Tall Seat Foam 2007-09 WR250/450F Std Seat Foam 2002-2010 YZ125/250 Tall Seat Foam 2002-2010 YZ125/250 $44.95 Std seat cover (Universal/trim to fit most models) $44.95 Tall seat cover (Universal/trim to fit most models)

Yamaha Oil/Air Filters

Frictionless Chain Guide Block by BRP The BRP Guide Block is able to absorb a hit without bending like the stock aluminum chain guard. Two-piece design easily replaces the OEM chain guide.

19-150

We now offer a high quality replacement oil and air filters 18-141 $4.49

18-4012 $23.95

17-087 $27.95 Rear Brake Pads 2003-2010 YZ/YZF 17-083 $27.95 Front Brake Pads 2003-2010 YZ/YZF,

$69.95 2008-2010 YZ 125/250 2007-2010 WR/YZF 250/450

Sprockets

We have a variety of sprockets available for your Yamaha. Heavy duty steel front sprockets and light weight aluminum for the rear.

20-513 $16.95 20-5113 $16.95 20-5114 $16.95 20-548 $44.95

20-550 $46.95

20-551 $46.95

JT Sprocket 13 Tooth Yamaha 2001-10 WR/YZF 250 2005-10 YZ 125 JT Sprocket 13 Tooth Yamaha 2000-10 WR/YZF 450 1999-2010 YZ 250 JT Sprocket 14 Tooth Yamaha 2000-10 WR/YZF 450 1999-2010 YZ 250 JT Sprocket 48 Tooth Yamaha 2007-10 WR250 2001-10 YZF 250 1999-2010 YZ 250 2000-10 WR/YZF 426/450 2005-10 YZ 125 JT Sprocket 50 Tooth Yamaha 2007-10 WR250 2001-10 YZF 250 1999-2010 YZ 250 2000-10 WR/YZF 426/450 2005-10 YZ 125 JT Sprocket 51 Tooth Yamaha 2007-10 WR250 2001-10 YZF 250 1999-2010 YZ 250 2000-10 WR/YZF 426/450 2005-10 YZ 125

EK Chains Sport Series 
 O-Ring/ Quadra X-Ring Chain

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain. Also features four point pin riveting, solid bushings and rollers for longer chain life.

Hi-Flo Oil Filter Yamaha 2003-10 WR/YZF 250/450 except 2010 YZF450 Hi-Flo Air Filter Yamaha 1997-2010 YZ250 2001-10 YZF 250 1998-2009 YZF 400/426/450 2001-02 WR 426

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

Suspension

Full line of suspension parts and services available for your Yamaha.

See back page of catalog or call for details regarding suspension work.

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

Replacement fastener kits

Rekluse Z-Start Pro/EXP Clutch Kits

The Z-Start Pro offers unique benefits as a high-end complement to Rekluse industry-leading Z-Start Clutch. The Z-Start Pro offers features which directly benefit pro-level riders, motocross riders, and any motorcycle or ATV rider.

The Rekluse Core EXP Clutch consists of a center clutch, a matched set of steel drive plates, springs, an EXP friction disk and an EXP pressure plate. All Rekluse Core Clutches work with your bike’s stock friction disks or Rekluse friction disks. One of the primary benefits to the Rekluse Core Clutch is the ability to change from anti-stall mode (Core EXP Clutch) to manual mode (Core Clutch) in a matter of minutes.

RMS-870 RMS-871 RMS-873 RMS-7770 RMS-7773

$599.00 $599.00 $599.00 $799.00 $799.00

Z-Start Pro Clutch YZ250 1999-2010 Z-Start Pro Clutch 250 YZF/WR 2001-2010 Z-Start Pro Clutch 450 YZF/WR 2007-09 EXP Clutch YZ250 1999-2010 EXP Clutch YZF/WR450 2005-2009

Twin Chamber Fork cartridge holder Tool

Take the hassle out of disassembling twinchamber forks with this simple tool.

54 piece fastener replacement kit.

Great to keep in the tool box or use to dress your ride up.

18-400 $15.95 Jap Style bolt kits

22-350 $12.95

Wheel Bearings and Spacers

Enduro Engineering offers a great selection of replacement spacers, bearings and seals. The spacers are hard anodized for longer wear. These bearings and seals are an economical replacement to the expensive stock ones.

16-550 $18.95 16-560 $44.95

16-583 $19.95 16-584 $19.95 16-592 $55.50 16-593 $55.50

Rear Wheel Spacer Kit Yamaha YZ/YZF/WR 2002-2010 Rear Wheel Spacers/Bearings/Seals Kit Yamaha YZ/YZF/WR 2002-2010 Front Wheel Spacer Kit Yamaha WR 2005-2010 Front Wheel Spacer Kit Yamaha YZ/YZF 2008-2010 Front Wheel Spacers/Bearings/Seals Kit Yamaha WR 2005-2010 Front Wheel Spacers/Bearings/Seals Kit Y Yamaha YZ/YZF 2008-20102010

Sprocket fastening kit

Designed to fit all Yamaha dirt bikes, contains six Grade 10 steel sprocket bolts and six fuji-style metal locking nuts 18-500

$9.95

KAWASAKI/ SUZUKI Accessories

Bar Risers mounts

The Enduro Engineering bar mount riser kit replaces your stock mounts, moving your handlebars 5/8” forward and 5/8” higher than stock.

23-601 $69.95 7/8” Handlebar Riser Mounts Kawasaki 2002-2007 KX 125/250/500 1995-2005 KDX 200/220 2004-2010 KXF 250/450 2008-2010 KLX 450 23-602 $69.95 Bar Riser Handlebar Mounts Kawasaki 2002-2007 KX 125/250/500 1995-2005 KDX 200/220 2004-2010 KXF 250/450 2008-2010 KLX 450

Paul Whibley

Axle Pulls

Make wheel maintenance a breeze with this time saver. Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tire.

23-050 $19.95 Front Axle Pull Handle

Insert 2003-10 (125-450cc) 23-061 $19.95 Rear Axle Pull 2003-10 125/ 250/ 250F/ 450F

Ultra Disc Guard with Complete Carrier

Protect your expensive rear brake rotor with this disc guard. Replaces the entire brake carrier for superior strength and features a replaceable fin.

13-071 $94.95 ‘ 04-06’ RMZ250, 2004-2010 KXF250 2006-2010 KLX/KXF450 13-072 $94.95 2007 RMZ450, 2007-2010 RMZ250 13-073 $94.95 2008-2010 RMZ/RMX 450

Suspension Services Full line of suspension parts and services available for Kawasaki and Suzuki See back page of catalog or call for details regarding suspension work.

Brake Pads

Replace your worn out brake pads and rotors with Galfer quality replacements. Available in both Semi Metallic & Full Metallic compounds.

17-083 $27.95 Front Brake Pads 2003-10 KX/KXF 17-087 $27.95 Rear Brake Pads 2003-10 KX/KXF

Replacement fastener kits

Rekluse Z-Start Pro/EXP Clutch Kits

The Z-Start Pro offers unique benefits as a high-end complement to Rekluse industry-leading Z-Start Clutch. The Z-Start Pro offers features which directly benefit pro-level riders, motocross riders, and any motorcycle or ATV rider.

The Rekluse Core EXP Clutch consists of a center clutch, a matched set of steel drive plates, springs, an EXP friction disk and an EXP pressure plate. All Rekluse Core Clutches work with your bike’s stock friction disks or Rekluse friction disks. One of the primary benefits to the Rekluse Core Clutch is the ability to change from anti-stall mode (Core EXP Clutch) to manual mode (Core Clutch) in a matter of minutes.

RMS-840 RMS-845 RMS-861 RMS-7745 RMS-864 RMS-867 RMS-7764

$599.00 $599.00 $599.00 $799.00 $599.00 $599.00 $799.00

Rekluse Z-Start Pro Clutch Kawasaki KX250F 2009-10 Rekluse Z-Start Pro Clutch Kawasaki 450 KXF/KLX 2006-10 Rekluse Z-Start Pro Clutch Kawasaki KX250F 2004-08 Rekluse EXP Clutch Kawasaki KXF/KLX450 2006-10 Rekluse Z-Start Pro Clutch Suzuki RMZ450 2008-09 Rekluse Z-Start Pro Clutch Suzuki RMZ250 2007-09 Rekluse EXP Clutch Suzuki RMZ4540 2008-09

54 piece fastener replacement kit. Great to keep in the tool box or use to dress your ride up.

18-400 $15.95 Jap Style bolt kits

Radiator Braces

Sprocket fastening kit

11-170 11-171 11-172 11-173 11-174 11-180 11-181 11-182 11-183 11-184

18-500

Strong yet light weight, these aluminum braces protect your radiators from getting twisted and bent without sacrificing airflow $94.95 $94.95 $94.95 $94.95 $94.95 $94.95 $94.95 $94.95 $94.95 $94.95

Suzuki 2008-09 RMZ 450 Suzuki 2008-09 RMZ 250 Suzuki 2010 RMX 450 Suzuki 2010 RMZ 450 Suzuki 2010 RMZ 250 Kawasaki 2008-2010 klx450 Radiator Brace Kawasaki 2008-09 KXF450 Radiator Brace Kawasaki 2009 KXF 250 Radiator Brace Kawasaki 2010 KXF 450 Radiator Brace Kawasaki 2010 KXF 250 Radiator Brace

Designed to fit all Kawasaki and Suzuki dirt bikes, contains six Grade 10 steel sprocket bolts and six fuji-style metal locking nuts $9.95

www.enduroeng.com • 517-393-2421

UNIVERSAL Accessories Route Sheet Holder

Features a snap on top, water tight seal, and crack resistant plastic.

14-049 14-052

$8.95 Replacement lense for Route Chart Holder $22.95 Route chart holder Black

PitStop Gas Can Bag

Take the hassle out of carrying multiple items to the gas stop with the PitStop Gas Can Bag. Built with industrial straps and clips to insure that your items stay intact. With two zipper pockets on both sides and a Velcro access tool pouch on the back, there’s plenty of room for chain lube, cold drinks, rain jackets, tools, food and whatever else you may need.

Universal Mounting Bracket Score Card Holders

Made of weather proof vinyl, includes a Velcro strip to stay securely fastened. Easily mounts to any fender.

12-039 $9.95 Black Scorecard Holder

22-900 $49.95 PitStop Gas Can Bag

Tool Tote rear fender bag

This rear fender bag features all leather construction with a hard plastic bottom for durability. Sewn in nylon straps help hold items securely in place. All mounting hardware is included. Limited lifetime warranty*.

22-500 $49.95 Tool tote rear fender bag

Grip Heaters

Now there is a handy little device to keep track of hours on your motor. Keep track of motor hours for maintenance and services like oil changes, valve adjustments, piston and ring replacements, etc. Works on any motor! Just wrap the single wire around the spark plug wire and your all set!

Dimensions are 2.125” L x 1.490” W x 0.550” D 30-001 $39.95 Universal Hour Meter

Now get rid of that tangled vent hose and add a factory look with our billet one-way breather.

27-002

$14.95 Gas cap breather valve

www.enduroeng.com • 517-393-2421

Replacement fastener kits Rim Decals

Are your black wheels all scratched and dinged? Our Rim Decal kit will help hide those scars. The decals are made from a thick vinyl with 3M adhesive. One kit will dress up a complete front and rear (18” or 19”) rim.

25-118

Sprocket fastening kit

Vent Hose

Pedal Achor Kit

Universal Hour Meter

15-054 $29.95 Grip Heaters

18-500 $9.95 Sprocket bolt kit

16-035 $34.95 Universal Computer Mount

17-060 $10.95 Pedal Anchor Kit

Keep your hands loose and warm with these easy to install grip heaters. Includes all the hardware and a hi-low switch. Works with any bike with a lighting coil. Made famous at Dirt Rider Magazine’s 24 Hour Test!

Designed to fit all Japanese and most European dirt bikes, contains six Grade 10 steel sprocket bolts and six fuji-style metal locking nuts

Now mount your accessories with ease. This bracket kit works with steering stabilizers, tapered bars or both.

$29.95 Enduro Engineering Rim Decal Kit

Seat Covers License Plate Holder

This holder is made of tough plastic and comes with all the necessary hardware for mounting. They will also adapt to almost any off-road rear fender.

22-700 $14.95 License plate holder

We offer durable semi grip replacement seat covers 7504-21-21 $44.95 Std seat cover (Universal/trim to

fit most models) 7514-21-21 $44.95 Tall seat cover (Universal/trim to

fit most models)

54 piece fastener replacement kit. Great to keep in the tool box or use to dress your ride up.

18-300 18-400

$19.95 Euro Style assorted bolt kit $15.95 Jap Style bolt kits

EK Chains Sport Series O-Ring/ Quadra X-Ring Chain

Thick side plates, longer wear life and fatigue strength make this sealed o-ring chain a bargain. Also features four point pin riveting, solid bushings and rollers for longer chain life.

EKO-116 EKX-116 EKO-120 EKX-120 EKO-ML EKX-ML

$62.26 $90.71 $64.52 $93.93 $5.36 $5.36

EK Chain Sport Series Oring 116 link EK Chain Quadra X-ring 116 link EK Chain Sport Series Oring 120 link EK Chain Quadra X-ring 120 link EK Sport Series Master Link EK Quadra Master Link

SUSPENSION Enduro Engineering Suspension Services

For over 20 years EE has been a leader in Off-Road Suspension development. The one thing that we feel sets us apart from the rest, is our staff, all of us here at EE are riders like our customers. Our staff has either raced or ridden in just about every inch of this country from the East coast to the West coast. Competed in every type of off-road event from Moto to the ISDE. So no matter where you ride we have experience in that type of terrain and can offer you the best suspension set-up for those conditions. We use a philosophy to personalize your suspension based on your individual needs, so we look at your likes, dislikes, style of riding, ability and area that you ride. We use this to give you a custom suspension setting, tailored for you, not a cook book setting. So whether you’re a trail rider, racer or something in between, we have what you need, from our championship winning revalving service, oil changes and springs. Please feel free to give our sales staff a call if you have any questions about our suspension services.

35-001 35-002 36-003 36-004 36-005 36-006 36-007

$159.95 Shock Revalve $64.95 Shock Oil Change $169.95 Fork Revalve $49.95 Fork Oil Change $64.95 Fork Seal Change $199.95 Twin Chamber Fork Revalve $99.95 Twin Chamber Fork Oil Change

Enduro Engineering Terms & Conditions

Terms: We Accept VISA, MasterCard, American Express, & Discover. We also ship COD (Dealers Only) dealer net 30, with approved credit.

Prices: Prices are subject to change without notice. Please call (517) 393-2421 or Email info@enduroeng.com if you have questions. Dealers may only discount products up to 10% less than the published suggested retail. Any dealer who is found to discounting products beyond the allowed discount may be terminated as an Enduro Engineering dealer.

Shipping: All orders are shipped UPS ground unless otherwise specified. Dealer and retail orders over $300.00 receive free ground shipping in the contiguous 48 states. Orders to Alaska & Hawaii that are over $300.00 will receive discounted shipping.

Backorders: Backorders are kept and filled as soon as possible. Prior to a backorder release, each customer will be contacted for order verification. All backorders in the contiguous 48 states are shipped free freight. E3 Exhaust Products and Seat Products are exempt from free backorder shipping. If you need to cancel a backorder please call or email.

Returns: We hope that you are satisfied with your purchase. In the event of a return, please call to be issued a return authorization number. No returns will be accepted without a return authorization number. Opened merchandise may be subject to a 15% restocking fee. This will be determined when you call to receive a return authorization number.

No returns accepted after 60 days.

Warranty & Disclaimer:

All parts manufactured, designed or sold by Enduro Engineering, Inc. (EEI) are to be installed by a licensed motorcycle dealer or a licensed motorcycle technician. Motorcycles can be dangerous.

Serious injury, death and property damage can result from the use of motorcycles. This risk is increased by improper installation or misuse of aftermarket parts. EEI’s customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance of their motorcycles. In the event of a possible defect in material or design, or any other defect in a part manufactured, designed or sold by EEI, the responsibility of EEI is limited to either a refund of the purchase price or the replacement of the part if EEI determines the part to be defective, and subject to EEI’s inspection of the part within thirty (30) days from the date of purchase. (Note: any attempted repairs or modifications made to EEI products will void this limited warranty).

EEI, under no circumstances will be responsible for incidental and/or consequential damages, property damage, personal injury damage, or damage, injury, cost or expense of any kind or nature whatsoever. By purchasing an EEI product or a product sold by EEI, you (1) acknowledge the above disclaimer and agree to its terms; (2) agree that any claim brought against EEI arising from and/or pertaining to or otherwise related to a part manufactured, designed or sold by EEI must be brought in the Michigan State Courts located in the County of Ingham or in the Federal District Court for the Western District of Michigan and that Michigan law shall apply on all issues; and (3) any claim against EEI must be brought within one (1) year of purchase of the product.

EEI makes no other warranty, express or implied, including without limitation any warranties of merchantability and fitness for a particular purpose.

www.enduroeng.com • 517-393-2421

World Headquarters

6081 S. Martin Luther King Blvd.

Lansing MI 48911 PHONE: 517-393-2421 FAX: 517-393.0632 www..enduroeng.com

West Coast Distribution and Suspension Service Center Steahly OffRoad

3850 Pioneer Rd. Medford, OR. 97501 Phone: 541-535-4896 Fax: 541-535-4881 Toll Free- 800-800-2363