“Where Your Dreams Begin to Come True�
Low maintenance composite decking system for new projects, renovations and re-surface.
95%
The management team of Northern Composite Products has over 20 years of combined composite knowledge as well as over 125 years of extrusion and injection mold experience. We understand the expansion and contraction of plastics, the effect of water absorption, fading and mildew of the product. We have the technical staff that has worked through challenges in every aspect related to extrusion. We have defined our product from others in the industry using rice hulls as the natural fiber. Northern uses 95% recycled material / natural fiber, glass spheres and other important additives. Northern Composite Products has the leading technology to extrude hollow deck boards. NCP’s board strength is equivalent to most of the solid boards of our competitors. Slide & Go Fastening System is user friendly allowing installation to be easy with a professional result. Slide & GoŽ has a hidden fastening device that equally spaces your deck board, allowing for expansion and contraction. We are confident you will enjoy your low maintenance deck experience.
95% 95%
www.northerncompositeproducts.com
WHY Choose Northern Composite Products? What Makes Our Product Different? Rice Hulls, a natural fiber is a large percentage of our formula used in the process replacing wood. Rice hulls are unique within nature. They contain approximately 20% opaline silica in combination with a large amount of the phenyl propanoid structural polymer called lignin. This abundant agricultural waste has all of the properties one could ever expect of some of the best insulating materials. Recent ASTM testing conducted reveals that rice hulls do not flame or smolder very easily. They are highly resistant to moisture penetration and fungal decomposition and they do not transfer heat very well. They do not smell or emit gases and they are not corrosive with respect to aluminum, copper or steel. In their raw and unprocessed state, rice hulls constitute a Class A or Class I insulation. Northern Composite Products offers numerous profiles that allow installers to “trim out� the entire deck surface project with composite material. The Slide & GoŽ Fastening system is a user friendly approach to deck surface installation.
ADVANTAGES - No painting - Slip resistant - No splinters - Low water absorption - Less likely to allow moisture to propagate mold or fungi - Can be power washed - Wood grain appearance
- Minimal fading - No revealing nails - Low Maintenance - Slide & Go System aligns boards for - Professional construction appearance - 20 year prorated warranty
Northern Composite Products offers a unique SYSTEM for new deck application, or renovations and resurface of existing decks. NCP system consists of deck boards, expansion trim, fascia, hole plugs, and a concealed fastening system. Easy installation guide and various colours. Technical support available.
Manufactured from Unique Material Rice Hulls(Natural fiber)
Glass Spheres(Recycled)
High Density Polyethylene (Recycled)
95% Over 95% Recycled/Natural Fiber (Other formulated additives)
www.northerncompositeproducts.com
FIVE NATURAL WOOD COLOURS CHESTNUT
CN Before
After minimal fading
MAPLE
MP Before
After minimal fading
95%
CEDAR
CR Before
After minimal fading
Heritage Grey
HG Before
95%
After minimal fading
Mahogany
MG Before
After minimal fading
www.northerncompositeproducts.com
NCP DECKING
95%
Each board is available in all 5 colours. Item
Enviroboard (hollow)
DESCRIPTION
Flat wood grain on both sides Available Colors:
CN Varigated
CR
MP
CR
MG
MP
MP
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
HG
MG
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
HG
MG
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
CR
Solid decking board Available Colors:
CN Fascia
MP
Solid grooved board Available Colors:
CN Northernlite
HG
AG
Rolling grove brushed finish and V-grooved Available Colors:
CN Accuspan
CR
V-grooved and flat wood grain Available Colors:
CN Kombiprofil
MP
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
Flat wood grain on both sides 5-1/8 x 15/16 x 12’ 5-1/8 x 15/16 x 16’ 5-1/8 x 15/16 x 20’ Available Colors: Brazilian Cherry and Amazon Grey
BC Euroboard
SIZES(NOMINAL)
HG
MG
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
CR
HG
MG
5/8 x 7-1/2 x 12' 1/2 x 6 x 12' 5/8 x 3-1/2 x 12'
Solid fascia board
Available Colors:
CN
MP
CR
HG
MG
NCP DECKING ACCESSORIES Item
E-trim
DESCRIPTION
SIZES(NOMINAL)
Expansion Trim Slide & Go corner trim and joint mouldings Available Colors:
12' length
CN Dock Material
CR
MP
CR
HG
MG
5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20'
HG
MG
Under construction material 12' length Non structural, used on flat structural surface ie. Concrete and flat roofs. Available Colors:
CN
End Caps
M
Hollow material for docks and other building needs Available Colors:
CN Under Construction
95%
M
CR
HG
MG
T-Trim
Expansion trim for large decks
Fastening clips and driver bit
Hole plugs
www.northerncompositeproducts.com
95%
slip resistant surface.
POWER WASH FRIENDLY.
95%
www.northerncompositeproducts.com
Why Choose Northern Composites? Low Maintenance Composite Decking for New Projects, Renovations and Re-Surface. Manufactured from Unique Natural Material Rice Hulls, Glass Spheres, High Density Polyethylene and other additives Over 95% Recycled /Natural Fiber
Getting Started
TOOLS REQUIRED
Choose: - Deck board style - Colour (5 colours available) - Matching E Trim and Fascia Boards with Hole plugs - Fastener Kit
- Pencil - Level - Jigsaw - Handsaw - Drill - Chalk Line - Square - Tape Measure Optional: Chop Saw/Table Saw
Fastener Kit includes 250 Fasteners and stainless steel screws, 1 driver bit and installation Instructions (Covers approx. 10‘ X 10’ surface) Fastener Calculation - 2.5 fasteners /sq ft.
QUICK TIPS - Ensure you read the installation guide prior to starting - Ensure you follow proper fastening methods as per installation guide - Do not over torque screws - Leave sufficient overhang on boards for expansion and contraction - To finish off your deck use E Trim and Fascia boards with hole plugs - All sub-sturcture must comply with Local Building Official Code
Visit our website for complete installation instructions, www.northerncompositeproducts.com.
m.
Slide & Go速 Fastening Clip
95% For new decks or resurface
Concealed Fastening System
E-TRIM AND FASCIA BOARDS To finish off your deck use Nothern Composite Products E-Trim and Fascia in conjunction with E-Trim connectors and connector brackets.
E-Trim allows for expansion and contraction. Fascia available to enclose joists. Fascia and hole plugs for a professional finish. Visit our website for complete installation instructions, www.northerncompositeproducts.com. www.northerncompositeproducts.com
CLEANING AND CARE RECOMMENDATIONS Storage Store Northern Composite Products under cover to maintain a clean surface. If stored outdoors, they must be covered with a tarp designed for outside use. Products should be stored in a dry space with bottom supports equally spread apart. Long term storage product should be banded together. Handling - Never dump NCP materials when unloading - When carrying NCP decking, it is easier to carry on edge - Do not slide planks against each other when moving them. When removing deck boards from the skids the boards should be lifted and set them down - Do not slide tools or drag equipment across the top of the planks during construction - Keep the surface of the planks free of construction waste to prevent damage to the planks FOLLOW ALL the guidelines above when handling these planks to minimize scratches, nicks and grooves, and preserve the natural colour and wood grain appearance. Basic Cleaning Recommendations Although NCP products are low-maintenance, NCP recommends periodic cleaning to help maintain the natural wood grain of the product. For best results power wash using dish soap detergent. The recommended maximum pressure is 1700 psi for NCP decks. A fan tip nozzle must be used along with the proper cleaning product. Spray in the direction of the brush/grain pattern to avoid damaging the product. Use caution not to damage the material and always take the proper safety precautions when operating a power washer. Ice and Snow For ice removal; either rock salt or calcium chloride may be used without damage to the surface. However, either of these products may leave a white residue, which may be removed by either rinsing with water or a mild soap/ water solution. If shoveling the deck, a plastic shovel or a shovel with a plastic edge must be used. Ensure you shovel in the same direction the deck boards are installed in length. Going across the deck boards will leave scratch marks. Painting/Staining/Sealing Although NOT recommended, NCP products may be painted or stained. Once the product is painted, stained or sealed, subsequent applications will be necessary to maintain appearance. NCP does not guarantee the performance of anything applied to the product. Wait approximately 4 to 6 weeks or until the product has completed its weathering process before painting or staining. Clean your NCP surface prior to applying paint or stain. Never paint or stain over surfaces that may contain dirt, or mildew. Apply paints and sealers in accordance with the manufacturer’s application instructions. Dirt, Grime, Mold and Mildew Stains NCP products are formulated with 95% natural fiber (Rice Hulls), Recycled bottles glass spheres and other additives. Rice Hulls are highly resistant to moisture penetration and fungal decomposition. Mold, Mildew and Fungi will grow on everything; however the Rice Hulls prevent the mold to grow into the product. NCP recommends products should be periodically hosed or power wash. Even if it appears clean, it is important to prevent build-up of pollen/debris. Mildew stains may occur where moisture, pollens, and/or dirt are present. Mildew needs a food source to grow, which can be grass, pollens, dirt, debris, wood and wood resins. Maintaining a clean, dry surface is the best method for combating mildew. Spot Stains and Scratches Many stains can be cleaned with soap and water. If the stains have set NCP recommends using a wire brush going with the grain to remove the stain. Areas cleaned may lighten; this will require 6 to 10 weeks exposure to the sun to match the remaining product.
“Always wipe up spills immediately to avoid a potential permanent stain”
Stain test and how to clean, care and repair
NCP cedar composite board.
Mustard
Ketchup
Relish
95%
Wine
95%
Cleaned with warm water and regular dish sopa after 24 hours.
Using a brass wire brush removed the remaining stains.
www.northerncompositeproducts.com
Made in Fergus, Ontario, Canada visit us @ www.northerncompositeproducts.com
95%
Slide and Go Patent Pending #2,608,118 E-Trim Patent Pending #2,603,327