TransNet NZ Ltd HV Juice - August/September 2022

Aug/Sep 2022

HV JUICE

GET SMART Smart Fault Isolation Devices Page 2

Introducing the Slingco Range PAGE 8

www.transnet.co.nz

This Issue NEW ARC RATED RAINWEAR PAGE 6

THE RIGHT 1000V VDE TOOLS FOR THE JOB PAGE 9

GET READY FOR THE LINES COMPETITION 2022 PAGE 12

FIND OUT WHY YOU NEED SMART FID

SMARTER · SAFER · BETTER

The case for Smart Fault Isolation Devices THE PROBLEM

THE SOLUTION

Conventional Expulsion Drop Out Fuses cannot distinguish between transient and permanent faults. If a single EDO fuse blows under a transient fault, it often causes unnecessary long outage before it can be replaced because a crew must investigate and locate a ‘permanent’ fault (which does not exist). EDO fuse operations and failures can produce arcing and cause fires, stress other hardware on the line, create safety issues, and result in costly repairs.

A Fault Isolation Device (FID) is a reusable electronic device, not a single-use thermal fuse. It clearly distinguishes between transient and permanent faults and operates only on permanent faults, saving time and resources on fault identification. FID fuses are activated electronically, and do not produce arcing. When the FID detects a permanent fault it operates all 3 FID fuses automatically and instantly notifies the network owner. FID fuses do not cause unnecessary stress on other hardware on that line.

LEVELLING UP THE FID A Smart FID System enhances a standard FID to work as a Sectionaliser in conjunction with upstream reclosing services. This system gives even more versatility for applications where automation is beneficial.

SMART FID EQUIPPED WITH ARC SHUTTER WORKING AS A STANDALONE DEVICE

SMART FID SYSTEM FEATURES •Quick detection of transient & permanent faults on distribution line •Automatic fault sectionalising for permanent fault in coordination with upstream Reclosing devices •Minimize SAIDI and SAIFI •Highly programmable and versatile •Instant notification of FID operation to the operator’s existing SCADA system or mobile device •Three phases open simultaneously even for a single phase-to-earth fault

POTENTIAL APPLICATIONS • Rural and urban spur lines

• Lightly loaded rural feeders

• Remote end-of-line sections of long feeders

• Can be used as stand-alone device with 200A Arc Shutter for any line with load current not exceeding 200A

• Protection of OH & GM transformers (in conjunction with upstream reclosing devices)

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

NEW TE CONNECTIVITY CABLE CLEATS TE Connectivity’s (TE) cable cleats are engineered to withstand harsh environments and perform under extreme temperatures from -40°C to +120°C. Their compact and stackable design is ideal for installation where space is limited, such as wind farms, data centers and substations.

Our single cable cleats are range-taking to fit cables with an outer diameter up to 135 mm and are suitable for both metric and imperial sized hardware.

The interlocking EPDM molded inserts accommodate cable expansion, contraction, and vibration, as well as offer an increased level of asset protection and reduce mechanical load in vertical applications. To serve a wider application range, our cable cleats are also available as dual and trefoil versions.

EDPM Moulded inserts

FEATURES & BENEFITS • Made from impact-resistant, UV-stabilized, halogenfree, polymeric flame-retardant V0 material for use in harsh environments • High resistance to electromechanical forces • Strong mechanical performance due to innovative rib design and glass fiber reinforced material • Easy and fast installation thanks to simplified design • Flat surface design allows stacked configuration without an adapter • Tested according to IEC 61914 • Interlocking EPDM molded inserts version for increased asset protection • Available with stainless-steel hardware for higher corrosion resistance and mechanical performance

Available in single, dual, & trefoil

strut nut configuration

BUILT TO HANDLE NZ'S EXTREME CONDITIONS Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

New TE Connectivity Cable Cleats offer a highly reliable retention system for cables and terminations in LV, MV and HV applications.

www.transnet.co.nz

PORTABLE IP54 EARTH ANALYSER

mi3290

E

L

Metrel earth analyser

NTIAL TOO SSE

HEAVY DUTY ENT I AL TOO

GL

GF

GP

a a a a a a a a a a

a a a a a a

a a a a a a

AVAILABLE IN FOUR DIFFERENT SETS

L

E

SS

SET SPECIFICATIONS GX MEASUREMENT METHODS Ground Z 2-pole a Ground Z 3-pole a Ground Z 4-pole a Single/multi/sweep frequency a Wenner 4-pole a Schlumberger 4-pole a Selective (iron clamp) a Stakeless 2-clamps a Transient Impulse Impedance a HF 25 kHz Impedance a Step / Touch a Voltage potential a Low Impedance 4-point a Low Resistance 200 mA a Tower Passive one rod / Flex clamps a Tower FOP / 1xFlex clamp GX1 Tower FOP / 4xFlex clamp GX4 Mono Tower FOP / Flex clamp a MEASUREMENT ACCESSORY • Current earth spike, 90 cm, 2 pcs • Potential earth spike, 50 cm 2 pcs • G clamp • Shielded test lead on reel, 75 m • Test lead on reel 50 m, 3 pcs (black, a green, blue) • Test lead, 5 m, 2 pcs (blue, red) • Set of test probes, crocodile clip and 2m test lead, 4 pcs Flex clamp 5 m with 15 m shielded x4 (GX4) cable x1 (GX1) Iron clamp, 2 pcs a Kelvin clamp with 2,5 m cable, 2 pcs a Step Contact Meter Measuring Set a

ALL SETS CONTAIN:

a a a a a a Option a

a

a

GX

PLUS

GL

a

GF

GP

x1 a a a

CONTACT US TO ORDER YOURS Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

NEW LINK CONNECTOR FOR LV PILLARS

TAPPAT BOLTED 3 WAY LINK CONNECTOR

Works with solid, stranded, sector, & rounded conductors

FEATURES • 3x mains connections up to 300mm² and 6x service connections, 4x50mm² and 2x70mm² tap connections • Supplied with shrouds to insulate the contact blocks and are rated to 1kV. The polycarbonate cover is fixed into place via a removable screw • Mains connections made by M22 grub screw to predetermined torque setting dependent on cable size • Service connection made via M10 tinned brass grub screws • Mains connections made via easy-to-install dovetail connection system complete with integrated stopper • Contact block tin plated extruded aluminium • Serrated contact face for better electrical contact surface area and fracturing aluminium oxide layer • Range taking mains connections 185mm² up to 300mm²

Contact us now for more information.

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

PREPARE FOR STORMY WEATHER

SUITABLE FOR INFRASTRUCTURE & ROADING, OIL & GAS, MINI

ARC RATED RAINWEAR

29CAL INHERATEX BIB TROUSER 12017NT / COLOUR: Navy / SIZES: XS-4XL, 6XL, 8XL

FEATURES

STANDARDS

• Arc Rated / Inherent FR / Antistatic

ISO11612:2015 Class A1 B1 C1 F1.ISO 11611:2015 Class 1. A1, ISO14116 Index 3/5H/40. ASTM F1959/F1959M-14E1, 61482-1-2:2014, EN1149-5:2008.

Water Resistance H20:16,000+mm.

Breathability: 4,000g/m2/24hr.

• Elasticated waist • FR cotton lining • Covered elastic shoulder straps • Zipped gusset with velcro tabs at bottom outer leg • Front chest pocket • Completely seam sealed • Segmented FR Ultra-Flect retroreflective tape

FABRIC 300D Poly Oxford, anti-static carbon grid, with Modacrylic liner, and FR cotton lining.

• Arc rating: ATPV = 29Cal/cm2 • PPE Category Level 3 in accordance with NFPA 70E

FEATURES • Arc Rated / Inherent FR / Antistatic • Large Front Pockets • Segmented FR reflective tape • Long tail design for extra coverage

Class 2. ISO 14116 Index 3/5I/40.

EN1149-3:2008. EC 61482 -1-1:2019.

FABRIC 360gsm Inherent Modacrylic blend inner and Poly outer.

• ATPV 16cal/cm2 STANDARDS

16CAL TTMC-W17 SOFTSHELL JACKET

TTMC-W17 (CoPTTM). AS/NZS 4602.1:2011 + AMDT 2:2020 Class DN. AS/NZS 1906.4:2010 Class F. ISO11612:2015. A1, B1, C1. ISO 11611

29CAL TTMC-W17 X-TAPE INHERATEX JACKET 32317ONX / COLOUR: Orange/Navy / SIZES: XS-4XL, 6XL, 8XL

FEATURES

STANDARDS

• Arc Rated / Inherent FR / Antistatic

TTMC-W17 (CoPTTM). AS/NZS 4602.1:2011+ AMDT 2:2020 Class DN. 1906.4.2010 Class F. ISO11612:2015 Class A1 B1 C1 F1. ISO 11611:2015 Class 1, A1. ISO14116 Index 3/5H/40. ASTM F1959/F1959M E1, 61482-1-2:2014, EN1149-5:2008. Water Resistance H20:16,000+mm. Breathability: 4,000g/m2/24hr.

• 2-way YKK zip at centre front • Has internal zip to attach Arcguard rain vest • Waterproof zipped pockets with storm cover • -nternal mobile phone pockets • Removable hood can be tucked into collar • Storm cuffs • Completely seam sealed • Segmented Ultra-Flect FR retro-reflective tape with X-back for front to back differentiation • Arc rating: ATPV = 29Cal/cm2

FABRIC 300D Poly Oxford, anti-static carbon grid, with Modacrylic liner, and FR cotton lining.

• PPE Category Level 3 in accordance with NFPA 70E

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

pop'n'work pop up work tents

ING, & UTILITIES

new range

Pop 'N' Work pop up work tents and umbrellas have been made in America for over 35 years. Available in a range of sizes and styles, these high quality shelters are easy to use and protect field staff from UV and rain when working in the elements.

Features & Benefits • Safe and comfortable work environment • Made from a lightweight, UV stable protective polyester • Water repellent • Flame resistant to CPAI-84 standards • Pitched roof provides extra headroom and structural strength to hang tools and lights • Reduced weather related delays and increased productivity • Sizes from 4' x 4' up to 12' x 10' • 2 year guarantee on the frame

INDUSTRY APPLICATIONS • • • • • • •

Telecom Welding Oil and Gas Utilities Railroad Construction Emergency Response

TIME SAVING • • • •

Set up in seconds No loose parts Lightweight and durable Convenient Pop'N'Work Quick-Pack tent rolls up into carrying case, no separate bag needed

ENGINEERED FOR DURABILITY • Exclusive Pop'N'Work unified frame made with cold rolled steel and fibreglass is virtually unbreakable

Contact us today for more info and to order A l l S p e c i a l s a n d P ro d u c t s fe a t u re d i n T R A N S N E T J U I C E a re ava i l a b l e f ro m a l l g o o d e l e c t r i c a l w h o l e s a l e r s .

view the whole range

NEW PRODUCT RANGE - SLINGCO

INTRODUCING

Slingco is an award-winning supplier of high-quality cable grip and wire rope products, with over 40 years of industry experience.

Slingco products are used in safety critical applications for a wide range of markets. With sectors including oil & gas, civil engineering, aerospace, transport, utilities, marine/ offshore and the military, there’s no room for error.

POLE STAND

Slingco products are designed and manufactured to the highest specifications and tested to destruction. If products don’t meet and exceed the most stringent national and international standards they’re not good enough for our customers.

REEL LIFTER

• CABLE GRIPS • HYDRAULIC HOSE HARNESS • ROLLERS • CRIMP TOOLS • PULLING ROPE DIRT TARP

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

AND MORE!

www.transnet.co.nz

KNIPEX CUTTING TOOLS

Insulated tools are a matter of trust Professionals trust their tools. This trust is vital when working on electrical installations.

In this case, the electrician holding the pliers is also holding their life in their hands.

Our insulated tools therefore not only meet statutory requirements, but also offer the greatest possible safety, reliability and performance.

Every insulated tool undergoes, one by one, a dielectric strength at 10,000V AC before we sell it. This means that work in the area up to 1,000V AC has a safety buffer of ten times the permitted maximum limit. Other procedures check the reliability of the insulation towards heat, cold, tensile and impact force.

KP9536280 Insulated Ratchet Cable Cutters

KP9852 Cable Knife FEATURES • 1000V VDE dual component handles • Ergonomically designed handle with comfortable slip guard • Thumb recess and "finger hook" ensure a good transmission of force when the blade is pulled • Transparent protective cap • Special tool steel, oilhardened blade • Solid, fixed straight blade

Precision ground cutting blades for clean and smooth cuts. Single handed operation with little hand force required due to a high transmission ratio and 2-stage ratchet drive mechanism. 1000V VDE IEC/EN 60900.

FEATURES • 1000V VDE dual component handles • Black lacquered head

KP7406200 High Leverage Diagonal Cutting Pliers

KP9536280

KP9516200 Twin Cut Cable Shear FEATURES • 1000V VDE dual component handles • Chrome plated head • Precision ground blades for smooth cutting without crushing and deformation of cables

FEATURES

KP9852

• Integrated forged axle for heavy duty cutting • Suitable for all types of wire including piano wire • High cutting performance with minimum effort • Precision cutting edges additionally inductionhardened • Chrome vanadium heavyduty steel, forged, multi stage KP7406200 oil-hardened

FEATURES

KP0206200 High Leverage Combination Pliers

• 1000V VDE dual component handles • Chrome plated head • Fine-scored jaws for pulling and twisting

These pliers feature fine scored jaws, nut grip, extra long cutting edges and large bearing close to the cutting edge providing 35% less effort to cut. Powerful ergonomic handle design.

KP2616200 Long Nose Pliers with Cutter

FEATURES • 1000V VDE dual component handles • Chrome plated head KP9516200

KP2616200

KP0206200

Trust the best - order yours today P h Testing0dielectric 8 0strength, 0 442 182 subjecting each pair of pliers +64 9 274 3340 to a load of 10,000 V AC.

sales@transnet.co.nz

www.transnet.co.nz

MAKE SAFETY A PRIORITY

6 piece brass stand off set 111BSOS

This stand off set contains 3x25mm and 3x50mm long extensions and is used when the earth link is inserted into DIN fuse carriers that are deeply recessed. The stand off allows the earthing harness to suspend nicely without any undue pressure on the earth harness lugs or fuse carrier.

Removing this pressure prevents potential damage to both the earth harness lug and fuse carrier. They are used in conjunction with the 1115281041T LV Din Earthing Sets.

LV DIN EARTH SET FOR FUSE OUTLET

This earthing set is designed for earthing of LV DIN switches and is suitable for indoor and outdoor use. The set consists of short-circuiting cartridges, short-circuiting Cu cables in transparent insulation, earthing Cu cable, earthing clamp and insulating pole enabling you to safely attach the set. The insulating pole is made of glass fibre laminate which is suitable for its high electrical and mechanical resistance and stability. Produced according to standards CSN EN 61230, IEC 1230, PNE 35 9705, DIN 46 235.

FEATURES

for fuse outlet

• Delivered in a sturdy plastic storage box • Instructions for use and test certificate included • 24 month warranty for manufacturing defects

BE F ORE SH I P

transnet test lab

RE

G

TES

ED

P IN

T

• Type-tested according to standards CSN 35 9700, PNE 35 9705, CSN EN 61230 and IEC 1230 • Each set comes tested, tagged, and ready to go into service

use with lV Din earth set

ADY FOR USE CAT No. 1115281041T

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

LV OVERHEAD FUSE SWITCHES

Insulation Piercing Fuse Connectors up to 160 amp (K292)

K491

Continuous electrical path, no rivets/bolts/joints to loosen over time

Optional highly visible numbering plate

Spring element accommodates expansion & contraction due to heat cycling

Features

• Continuous electrical path from pierce point to fuse contact. No screws or rivets - one piece of machined material to make the connection between conductor and fuse link • Cable entry on underside creates natural cable drip loop (K491) • Spring element incorporated into fuse contact design for consistent contact during electrical cycling • Sealed cable entry point membrane, pierced only when the cable is installed • Fuse carrier is retained in the body of the housing even without fuse link • Test points on each terminal, accessible without removing fuse carrier base

• Drain holes and moisture step, to stop moisture entering piercing chamber • Optional high visibility numbering system (K491) • Shear indicator on bolt for visual confirmation shear head has been removed

K291 Spring Element Easy path out of the connector for any moisture Shear Bolt

• Fuse centering feature – helps guide fuse insertion from the ground • UV Stabilised materials used for longevity • Fully tested to IEC269-2-1 • 25 years proven reliable service in NZ

Bolt end does not damage stranded cables

• Unit is self-supported whilst being mounted on bracket – no need to hold while tightening

Membrane pierced on cable insertion

Cat No. K491 K291 K292

Ph 0800 442 182 +64 9 274 3340

Piercing teeth and contact are one piece

Fuse Link Style 22X58MM BARREL

sales@transnet.co.nz

NH00 DIN

Guides to centre fuse on contacts

Cable Range (mm²)

Amps

6-35 6-95 6-95

100 100 160

www.transnet.co.nz

GLOVES ON Sustainability, xxx Innovation READY TO & GO In The Lines Comp Is Back In 2022

sales@transnet.co.nz

Connexis Annual Connection 2022

TransNet Tonga

27-29 SEPTEMBER, LEVIN

Auckland 78 Cryers Road East Tamaki Auckland NEW ZEALAND Ph 0800 442 182 PO Box 39 383 Howick, Auckland Wellington 10 Petone Ave Petone Wellington NEW ZEALAND Ph 04 576 2530 PO Box 39 383 Howick, Auckland NEW ZEALAND

Nuku'alofa Lakalakaimonu Multi Utility Complex Taufa'ahau Road Poutaha Nuku'alofa TONGA Ph +67 627 939 PO Box 2932 Nuku'alofa TONGA transnet@kalianet.to

LINE MECHANIC COMPETITION TRANSNET: PREMIER SPONSOR

CABLE JOINTER COMPETITION TE CONNECTIVITY: PREMIER SPONSOR Placeholder, not for Printing Logo use must be approved Min Size 17mm Height

Cxxxxxx

See you there

TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.