TransNet NZ Ltd LV Juice - November 2022

DUCT SEALING SYSTEM FOR POWER CABLES

Avoid flooding from unsealed cable pipes and ducts. TE's Rayflate Duct Sealing System has been designed for use on power cables to provide a watertight seal when used with plastic, concrete or steel ducting systems. Once installed the seals can provide immediate access in clean and dry conditions, eliminating the need to pump manholes dry before work can begin.

FEATURES

• Versatile wraparound suitable for new cable installations or existing applications

• Installation in a few minutes

• Each Rayflate seal covers a large range of cable and duct diameters

• Can be installed with water flowing out of the duct, saving installation time

The Rayflate seal consists of an inflatable bladder coated on both sides with a sealant strip. After the product is wrapped around the cable and slid into the duct the bladder is inflated with a gas pressure tool, pressing the sealant coating against the duct wall and the cable. An automatic gel valve system reliably retains the gas pressure in the seal.

• Quick and easy removal from a duct or pipe by deflation

• Environmentally friendly - no resins

• Performance tested

• Ideal for substation basements, cable vaults, & access manholes

VIEW THE ENTIRE RANGE SPECIFICATIONS ON OUR WEBSITE 

TRANSNET MONTHLY GIVEAWAY SUPPORTING KIWI BUSINESSES

What lolly is more classically Kiwi than a Jaffa? We're not sure there is such a thing, and since we're such big fans of local favourites we went back to our friends at the LollyShop in Christchurch for some of their sweet and colourful chocolate

orange treats for this month's giveaway. As a family business they knew their iconic lollies well and were able to help us out. The weather's heating up so eat fast before they melt in your hand, and if there

https://lollyshop.co.nz/

are any left (not likely!) you can always enjoy another Kiwi classic pastime and find a steep street to race them down.

TE Connectivity’s (TE) cable cleats are engineered to withstand harsh environments and perform under extreme temperatures from -40°C to +120°C. Their compact and stackable design is ideal for installation where space is limited, such as wind farms, data centers and substations.

Our single cable cleats are range-taking to fit cables with an outer diameter up to 135 mm and are suitable for both metric and imperial sized hardware.

The interlocking EPDM molded inserts accommodate cable expansion, contraction, and vibration, as well as offer an increased level of asset protection and reduce mechanical load in vertical applications. To serve a wider application range, our cable cleats are also available as dual and trefoil versions.

FEATURES & BENEFITS

• Made from impact-resistant, UV-stabilized, halogenfree, polymeric flame-retardant V0 material for use in harsh environments

• High resistance to electromechanical forces

• Strong mechanical performance due to innovative rib design and glass fiber reinforced material

• Easy and fast installation thanks to simplified design

• Flat surface design allows stacked configuration without an adapter

• Tested according to IEC 61914

• Interlocking EPDM molded inserts for increased asset protection

• Supplied with stainless-steel hardware for higher corrosion resistance and mechanical performance

BUILT TO HANDLE NZ'S

CONDITIONS

TE Connectivity Cable Cleats offer a highly reliable retention system for cables and terminations in LV, MV and HV applications.

LIGHT, TOUGH, TUDS UNDERGROUND PIT RANGE EXTENDED

The new addition to the TUDS family of underground pits might just be the game-changer you’ve has been waiting for.

Manufactured from innovative fibreglass reinforced composite material these pits are strong, lightweight, and corrosion resistant. The modular design, bolt free assembly and flat packed for shipping and storage make these pits perfect for any installation.

SMART DESIGN

The sidewall BeamStructure reinforces and locks the pit into the ground making it much stronger once installed. Modular design makes for simple on-site adjustments to pit depth.

WIDE RANGE

From 300mm to 1200mm across and 300mm to 900mm deep, this range offers a solution for almost any application.

LIGHTWEIGHT

90% lighter than the concrete alternative, each panel is easily lifted by one person.

STRONG

The complete rated to requirements AS3996:2019 B/C applications.

TOUGH,

STRONG complete unit is requirements of

AS3996:2019 for Class applications.

SMC MATERIAL

Resistant to temperature fluctuations, non-conductive, anti-corrosion, transparent to radio waves, non-leaching.

EASY INSTALL

The knock down panel and bolt free design coupled with flat pack design and no need for large lifting equipment saves time and money.

TESTED

Not only has the strength of the pit been tested from the top of the lid,but the strength of the sides is just as important. This unit has been tested for side wall strength too.