2.5m#DB.35ALONG x 35mm ID, BLACK/YELLOW "Uninsulated or inadequate covering will not protect anyone from electric shock. Never assume that an existing line covering is insulated." - 'Working near low voltage overhead electrical lines' guide, Worksafe IF YOU CAN'T ISOLATE, USE Insulating overhead electric lines is an important way to minimise risk when working up to 0.5m away. In accordance with Worksafe guidelines, our Tiger Tails: Comply with AS 4202 Have a voltage rating suitable for low voltage overhead electric lines Provide mechanical and environmental protection as well as giving a visual reminder that the overhead line is close READ WORKSAFETHEGUIDEDON'TTAKECHANCESWITHWORKERSAFETY This Month FREEWHILESTOCKSLAST www.transnet.co.nz LV JUICE PACK OF BOB'S thisonoverWhenBILTONGyouspend$400(+GST)oneinvoicemonth 2022September FREE TESTING WITH OUR RUBBER GLOVES PAGE 2 PREPARE FOR AN EV FUTURE PAGE 4 TRANSNET'S ONE STOP CALIBRATION SHOP PAGE 8
Incorporating high dielectric and physical strength, flexibility and durability, these gloves have earned a reputation for superior performance – meeting and exceeding the requirements of current ASTM D120 specifications. *On all new glove purchases HIGH DIELECTRIC GLOVESRUBBERSTRENGTH FREE GLOVE TESTING BEFORE DISPATCH TRANSNET MONTHLY GIVEAWAY SUPPORTING KIWI BUSINESSES At TransNet we're always looking for the real deal, so for this month's giveaway we've gone for a NZ made, NZ grow, protein-rich snack with no nasties like artificial flavors, preservatives, colors, or added nitrates/nitrites. Bobs Food Company manufactures NZ beef biltong and pure NZ beef sticks that are tender and easy to eat. Using the best topside available they slowly air dry spiced topside steaks to perfection and then thinly slice and package these tasty morsels. We hope one of these will get you through a long day when you're on-the-go! https://bobsbiltong.co.nz/ testingfree*TRANSNETTESTLABTRANSNETTESTLAB www.transnet.co.nzPh 0800 442 182 +64 9 274 3340 sales@transnet.co.nz
CRIMP CONNECTIONS WITH EASE ENVIRONMENTALLY SEALED HEATSHRINKABLE CRIMP CONNECTORS ENVIRONMENTALLY SEALED HEATSHRINKABLE | CRIMP CONNECTORS | FEATURES • Crimp link inside sealant-lined heatshrink sleeve • Adhesive lining enhances protective qualities • Completely environmentally sealed - protects from water, condensation, salt, and corrosion • Provides strain relief • Protects vibrationagainst • Fully connectioninsulates • UL, CUL and Lloyds listed APPLICATIONS • Automotive/truck wiring, repair, maintenance & accessory installations • OEM automotive/truck wire harness fabrication • Commercial (pumps/pools/spas)wiring • Marine electronics • Fleet maintenance • Appliances D40600030.38-0.95mmD406000123-6mm2 1.2-2.5mmD40600022 Sold in packs of 20 Cat No. Description BNB-03C8 HAND CRIMPER FOR HEATSHRINK STYLE CONNECTORS HEATSHRINK CONNECTOR CRIMPER Professional quality crimper, designed specially for crimping heatshrink style crimp connectors without damaging the insulation. FEATURES • Suitable for red, blue and yellow heatshrink crimp connectors • Machined dies • Length – 260mm use durasealwith All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.
ARE YOU READY EVERYTHING YOU NEED FOR PREPARE FOR AN EV FUTURE In applications where there is no wall to secure a charge station, the TransNet e-Mobility EV pedestal does the job. Our pedestal stands are designed and manufactured right here in New Zealand, specifically for use with Wallbox charge stations. Their sleek design, robust materials and custom nature make them the perfect choice for any landscape requiring charge infrastructure. This product offers a fully customisable solution for ground mount, wall mount, ceiling mount etc with custom branding and a multitude of charger combinations. Contact us for information on how to get your custom pedestals underway. CUSTOMISATIONS AVAILABLE • Panel Branding • Charger type (chargers not included and will incur additional cost) • Charger position (choice of front & back) • Number of chargers (up to two per pedestal) • Ceiling mount, Cable tray mount, Wall mount, Ground mount - whatever your application we have a solution EV CHARGER PEDESTAL KIT FREESTANDING PEDESTAL FOR WALLBOX EV CHARGE STATIONS PEDESTAL FEATURES • Powder coated Aluminium frame • Visually appealing • Standard Pedestal dimensions (mm): 1530H x 298W x 150D • Sturdy base plate to fasten in place • Customisable Perspex panels laser cut to fit desired charger configuration • Designed with the electrician in mind, these units are very simple to work on • Quality materials chosen for durability • Designed and manufactured in NZ CHARGER OPTIONS • Accommodates any Wallbox AC chargers, e.g. Commander 2 or Copper SB EVC-PED/COMPLETE-KIT Standard Kit with covers & junction box, contact us for customisations MADE IN NEW ZEALAND *Pedestal only INSTALLATION www.transnet.co.nzPh 0800 442 182 +64 9 274 3340 sales@transnet.co.nz
READY FOR EV? FOR EFFICIENT EV CHARGING CABLE TRAY CHARGER MOUNT FOR EASY CABLE TRAY INSTALLATION IN CARPARKS PEDESTAL SUPPLY PIT SUPPLY PIT FOR WALLBOX EV CHARGER PEDESTAL INSTALLATION EVC TERMINATION PIT MAKES ELECTRICAL SUPPLY OF UP TO 6 WALLBOX PEDESTALS EASY & EFFICIENT EV READY KIT PREPARES HOUSE FOR FUTURE EV (powerpointCHARGINGnotincluded) evc.co.nz | +64 9 274 3340 | ev@transnet.co.nz All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.
TOP QUALITY EVERYDAY APPROVALS UL E85381 (Black only) MIL-DTL-23053/4 Class 3 (Black only) 3:1 Shrink ratio only (excludes sizes 9/3,19/6) VG 95343 (clear 3:1 only) VDE 0341/Pt 9012 (clear 3:1 only) dwp thin heatshrinkwall Semi-flexible, general purpose adhesive-lined, moisture proof heatshrinkable tubing, with high shrink ratio. TE Connectivity's DWP heatshrink is designed to provide moisture proof sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components. APPLICATIONS • Environmental sealing • Cable insulation • Connector insulation for control wiring TECHNICAL DATA • Operating Temperature -55°C to 110°C • Minimum temperatureshrink80°C • Minimum full recovery temperature 110°C • Shrink ratio 3:1 • Black (clear ATUM 40/13 only) • Adhesive lined Cat No. Ø A B C D Insert kV Rating 1035EN 25 32 35 9 M6 3.3 1035FN 25 32 35 9 M8 1040FN 35 40 40 10 M8 1050GN 31 41 50 10 M10 1050HN 31 41 50 10 M12 LV STANDOFF INSULATORS FEATURES • Octagon shaped for easy installation • High dielectric strength • Arc quenching and tracking • Wear and corrosion resistant • High quality finish and appearance • High mechanical strength • Dimensional stability • Moulded-in, brass inserts • Chemical and oil resistant These insulators are moulded from high electrical grade, red Polyester Reinforced Resin (DMC), fitted with brass inserts and are extremely cost-effective with no compromise of quality. Crompton Greaves manufactures a range of busbar supports with octagonal centreband to compliment their range of switchboard and control panel accessories. innow!stock All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.
mi3100stl78promo mi3100s multifunction installation tester + martl78 continuity wire + bentrod kit ESSENTIAL TESTER PROMO KIT The MI3100S EurotestEASI enables online voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of loop impedance limits and RCDs for PASS/FAIL evaluation of test results. site • Built-in NZ fuse tables for automatic PASS/FAIL evaluation of the line / loop impedance result in accordance to AS/ NZS 3000 • Monitoring of all 3 voltages in real-time • Automatic polarity reversal on 200mA continuity test • Earth loop impedance test without tripping the RCD • Built-in charger and rechargeable batteries as standard accessory • Automated RCD testing procedure, RCD tripping time, or RCD tripping current measurement from 50V to 1000V • Continuity of conductors with 200 mA test current with polarity change • Continuity of conductors with 7 mA test current without RCD tripping • Line/loop impedance with PSC • Earth loop impedance • TRMS voltage and frequency • 3-phase rotation • RCD testing (general and selective, type AC, A, F) • Earth resistance (3-wire method) with optional S-2026, 20m Earth Testing Set kit includes 50m $1950.00wirecontinuity&bentearthpeg+GST www.transnet.co.nzPh 0800 442 182 +64 9 274 3340 sales@transnet.co.nz
FINDMOREOUTOur onsite Auckland test lab checks all brands of test & measurement equipment quickly and expertly. All checks and calibrations are traceable as our instruments are calibrated by IANZ Accredited or equivalent labs. BASIC CHECK Most suitable for Digital Multimeters, Clamp Meters, Voltage Testers (e.g., Duspols) and similar lower cost instruments. CHECKCALIBRATION This procedure is most suitable for mid-range, multifunctional instruments like Electrical Installation Testers, Appliance Testers, Micro-Ohm Testers and Insulation Resistance Testers (up to 10kV) - or similar. FULL CHECK This procedure is recommended for highly accurate and complex instruments like Power Quality Analysers, top range Installation Testers, Process Meters etc. INSPECTION We can do an inspection when you’re not 100% sure what the problem is. We’ll do a detailed check and confirm any out-ofrange readings, or tests that it is unable to perform. REPAIR If you already know where the issue lies, then your instrument is due for a repair. Usually, but not always, this means your instrument will have go back to the manufacturer. This may take several weeks before you get it back, but it will return completely checked and up to manufacturer’s original specifications. CALIBRATIONLABINACTIONPlaceholder, not for Printing Logo use must be approved Min Size 17mm CxxxxxxHeight TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification. OUR ONE STOP SHOP DOES IT ALL TransNet Calibration Lab Auckland 78 Cryers Road East Howick,POPhNEWAucklandTamakiZEALAND0800442182Box39383Auckland Wellington 10 Petone Ave sales@transnet.co.nzNEWHowick,POPhNEWWellingtonPetoneZEALAND045762530Box39383AucklandZEALAND TransNet Nuku'alofaTonga Lakalakaimonu Multi Utility Taufa'ahauComplex Road PhTONGANuku'alofaPoutaha+67627 939 PO Box transnet@kalianet.toTONGANuku'alofa2932
