TTI / Honeywell Focus Products

TTI and Honeywell Focus Products

www.ttieurope.com

TTI, Inc. – Never Short on Solutions

HONEYWELL

Introduction Honeywell Sensing and Control components are tailored to exact specifications for stronger performance, longer productivity and increased safety.

Enhanced accuracy and durability are built into every part, improving output and endurance. Discover today, Honeywell’s Focus Products at TTI Europe.

High Sensitivity Latching Hall-Effect Sensor ICs – SS360PT/SS460P Series

SS360PT/SS460P high-sensitivity latching Hall-effect sensor ICs with built-in pull-up resistor are small, sensitive and versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet.

The SS360PT/SS460P offers reliable switching points with a high magnetic sensitivity of 30G typical (55G maximum). This sensor IC does not use chopper stabilisation on the Hall element, providing a clean output signal and a faster latch response time when compared to competitive high sensitivity Hall-effect bipolar latching sensor ICs which do use chopper stabilisation.

Features & Benefits

• High sensitivity • Fastest response time • Bipolar latching magnetics • Built-in reverse voltage capability • Operates from 30G typical at 25˚C and 55G maximum over -40˚C – +125˚C temperature range, allowing for use of smaller magnets or a wider air gap • Internal pull-up Hall IC design simplifies installation and helps reduce component count and system cost • Provides for more efficiency and faster response in commutating a brushless DC motor and offers a clean output signal due to no chopper stabilisation • Well-suited for accurate speed sensing and RPM measurement • Package style options including subminiature SOT-23 surface mount on tape and reel (SS360PT), and the small, leaded, flat TO-92-style (SS460P) • Wide operating voltage range: 3VDC – 24VDC

2 www.ttieurope.com

Markets & Applications

Industrial and Commercial • Brushless DC motor commutation for white goods and other appliances • Flow-rate sensing • Speed and RPM sensing • Tachometer, counter pickup • Motor and fan control Transportation • Speed and RPM sensing • Tachometer, counter pickup • Motor and fan control • Electronic window lift Medical • Equipment with electric motors

HONEYWELL

SMART Position Sensors Honeywell SMART Position Sensors enable highly accurate motion control, improving operational efficiency and safety. The SMART position sensor is one of the most durable, adaptable, and lightweight position sensors available in the industry. Linear, arc, and rotary configurations are available. Series include the SPS Series.

Features & Benefits

• Sensing ranges: – 35mm linear: 0mm – 35mm – 75mm linear: 0mm – 75mm – 225mm linear: 0mm – 225mm – Arc: 0˚ – 100˚ or 0˚ – 180˚ – Rotary: 360˚ • Non-contacting technology • Analog or digital output • Accurate: 35mm measures values down to 0,04mm, 75mm down to 0,05mm, 225mm down to 0,14mm (analog) and 0,0035mm (digital); 100˚ down to 0.06˚; 180˚ down to 0.11˚; rotary ±0.069% FS • Combined patented MR sensor and ASIC technology provide enhanced differentiation and performance • Self diagnostics can reduce equipment downtime • IP67, IP69K allow use in harsh applications

Applications

• Aircraft actuators/ram doors • Boom arm detection • Chassis • Construction/heavy-duty equipment • Cutting and slitting machinery • Elevators • Marine motors • Material handling • Plastic moulding machines • Robotically-assisted surgery equipment • Solar panels • Steering angle • Valves • Wafer handling equipment • Wind turbines • Weapons systems

Zephyr™ Airflow Sensors – HAF Series Honeywell Zephyr™ Airflow Sensors, HAF Series-High Accuracy, ±50 SCCM to ±750 SCCM, 20 SLPM or 200 SLPM provide an analog or digital interface for reading airflow over the specified full-scale flow span and temperature range. Standard flow ranges are ±50, ±100, ±200, ±400, or ±750 SCCM, 20 SLPM or 200 SLPM, as well as custom flow ranges. They are fully calibrated and temperature compensated with an onboard Application Specific Integrated Circuit (ASIC). The HAF Series is compensated over the temperature range of 0˚C to 50˚C and operates across a temperature range of -20˚C to 70˚C. The state-ofthe-art ASIC-based compensation provides analog or digital (I2C) outputs with a response time of 1 ms.

Features & Benefits

• ±50 SCCM – ±750 SCCM • Total Error Band (TEB) as low as ±0.25% FSS • 20 SLPM and 200 SLPM • Total Error Band is ±0.5%FS or ±4.0 of reading, whichever is greater • Fast response time • Wide range of airflows • Customisable flow ranges and configurable package styles • Full calibration and temperature compensation • High sensitivity at very low flows • Linear output • High stability and accuracy • Low pressure drop • High 12-bit resolution (digital), 0.039%FS resolution (analog) • Low 3.3Vdc operating voltage • ASIC-based I2C output compatibility (digital) • Insensitivity to mounting orientation • Small size • Flexible regulated powers • Choice of port styles • Optimised calibration for many gases

Applications

• Anesthesia delivery machines • Ventricular assist devices (heart pumps) • Hospital diagnostics (spectrometry, gas chromatography) • Nebulizers • Oxygen concentrators • Ventilators • Patient monitoring systems (respiratory monitoring) • Spirometers • Laparoscopy • Air-to-fuel ratio • Fuel cells • Fume hoods • Gas leak detection • Gas meters

www.ttieurope.com 3

HONEYWELL

TruStability® Board Mount Pressure Sensors – HSC, SSC and NSC Series

Honeywell TruStability® Board Mount Pressure Sensors: HSC Series (±1% Total Error Band), SSC Series (±2% Total Error Band): Fully calibrated and temperature compensated using ASIC. Both series have pressure ranges from ultra-low (±2.5mbar to ±40mbar) through low to mid (60mbar to 10bar).

Honeywell TruStability® Board Mount Pressure Sensors: NSC Series: Uncalilbrated, unamplified, uncompensated with a low to mid (60mbar to 10bar) pressure range.

Features & Benefits

• Industry-leading long-term stability, reliability, flexibility, and Total Error Band (HSC, SSC) • Miniature packages with DIP, SIP, and SMT mounting options • Analog Vdc or digital output (I2C- or SPI-compatible) (HSC, SSC); analog mV output (NSC) • Provide high durability amid environmental factors such as temperature and humidity • Industry-leading long-term stability minimises system calibration needs, maximises system performance and helps support system uptime by eliminating the need to service or replace the sensor during its application life • Industry-leading Total Error Band provides the sensor’s true accuracy over a compensated temperature range, eliminating individual sensor testing and calibration (which can increase manufacturing time and process) supporting system accuracy and warranty requirements, helping optimise system uptime and providing excellent sensor interchangeability • Onboard signal conditioning typically allows for the removal of signal conditioning components from the PCB, reducing costs and simplifying production processes

4 www.ttieurope.com

Applications

• Airflow monitors • Anesthesia machines • Barometry • Blood analysis machines • Chemical analysers • Flow calibrators • Gas chromatography • Gas flow • Instrumentation • HVAC • Life sciences • Medical monitors • Oxygen concentrators • Pneumatic controls • Respiratory machines • Sleep apnea monitoring • Therapy equipment • Ventilation

HONEYWELL

Basic Board Mount Pressure Sensors – NBP Series

Honeywell Basic Board Mount Pressure Sensors: NBP Series – Uncompensated/Unamplified are low pressure sensors designed for customers who require a simple, cost-effective, basic performance, mV output, unamplified, uncompensated, high quality, high resolution solution for medical and industrial applications. These unamplified and uncompensated sensors offer infinite resolution of the pressure signal.

They will operate as specified from -40˚C to 125˚C. The NBP Series is ideal for those customers who want to do their own compensation, calibration, and amplification in order to make use of the maximum resolution of the bare sensor output, leveraging a custom algorithm required for the application. The NBP Series sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases and for non-corrosive, non-ionic liquids.

Features & Benefits

• Small size • Durable • Flexible • Robust • Package size (as small as 7mm x 7mm) • Many features allow for use in tough environments, including media compatibility options: – Non-gel coating: The input port is limited to non-corrosive, nonionic media such as dry air and gases and should not be exposed to condensation; the gases are limited to media that are compatible with high temperature polyamide, silicone, alumina ceramic, silicon, gold and glass – Gel coating: Uses the same materials in the wetted media path but is protected from condensation • Reflow mounting J-STD-020D, MSL 1 and rapid stabilisation after reflow soldering allow calibration immediately after mounting

Markets & Applications

Medical • Hospital beds • Oxygen concentrators • Wound therapy • Blood pressure monitoring Industrial • HVAC Transmitters • Air movement control • Environmental control • Level indicators • Leak detection • Industrial controls • Pneumatic controls • Other commercial applications

www.ttieurope.com 5

HONEYWELL

HumidIcon™ Digital Humidity/Temperature Sensors

Honeywell HumidIcon™ Digital Humidity/Temperature Sensors are digital output-type relative humidity (RH) and temperature sensors combined in the same package. They feature industry-leading long-term stability, Total Error Band and reliability and provide the lowest total cost solution, true temperaturecompensated digital I2C output, an ultra-small package and are energy efficient.

Features & Benefits

• ±1.7%RH (HIH9000 Series) • ±2.0%RH (HIH8000 Series) • ±3.0%RH (HIH7000 Series) • ±4.5%RH (HIH6000 Series) • ±4.0%RH (HIH6100 Series) • Industry-leading long-term stability (1.2% RH over five years) and reliability (MTTF 9,312,507hr) • True temperature-compensated digital I2C or SPI output •E nergy efficiency • Lowest •U ltra-small package size and options •L owest total cost solution ✱ •T rue, temperature-compensated digital I2C or SPI output ✱ •E nergy efficient: Low supply voltage (2.3Vdc); low power consumption (1μA in sleep mode) ✱

• Package – Choice of ultra-small SOIC-8 SMD (Surface Mount Device) or SIP 4 Pin – Available with hydrophobic filter and condensation-resistance – Tape and reel

• Combined humidity and temperature sensor

• High 14 bit resolution: Helps the user’s system detect the smallest relative humidity or temperature change

• Wide operating temperature range: – -40˚C – 100˚C HIH6000, HIH7000 – -40˚C – 125˚C HIH8000, HIH9000

• Optional one or two percent RH level alarm outputs: Monitors whether the RH level has exceeded or fallen below predetermined levels

• Multi-function ASIC

• Allows for compatibility with battery/wireless applications

• Facilitates dew point measurement due to built-in temperature sensor

• Allows ease of use in microcontroller applications

• Reduces or eliminates OEM calibration during assembly

• Reduces hysteresis through on board calibration

• Allows for use in high volume/automated manufacturing processes at OEM due to packaging

Markets & Applications

Medical • Sleep apnea machines • Ventilators • Neonatal incubators Industrial (focus products HIH7000: accuracy ±3%RH and HIH6000: accuracy ±4.5%RH) • HVAC/R ✱ • Weather stations • Air compressors • Telecom cabinets • Incubator, microenvironments ✱ competitive differentiator

6 www.ttieurope.com

HONEYWELL

Limitless™ Wireless Non-Contact Switches – WLS Series

Limitless™ Wireless Non-Contact Switches, WLS Series are industrial switches that provide non-contact presence/absence detection of a variety of different magnet styles and magnetic actuators installed on products, machines, equipment and more. The Limitless™ WLS Non-Contact Switch’s design features an industrial grade reed switch that customers can choose how it is oriented within the switch’s plastic head, i.e., either top- or side-sensing.

Combining this greater flexibility with proven harsh-duty packaging can result in increased efficiencies and improved safety for industrial machines, equipment, OEMs and operators.

Features & Benefits

• Wireless Design • Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point • FCC 15, IC, ACMA, ETSI, COFETEL, WPC and IDA • Up to 305m line-of-sight communication range when used with a Limitless™ wireless monitor or receiver module (sold separately) • Reliable, flexible and secure wireless transmission • Replaceable battery with ultra-low power consumption • Direct or remote mount antenna options • IP67; NEMA 1, 4, 12, 13 • Top- and side-sensing heads • Zinc head and body are phosphate treated and epoxy finished • Allows non-contact actuation • Enables presence/absence detection in remote parts of the application/ machinery where wiring is an issue or not feasible • Able to reconfigure and network multiple switches, or point-to-point with personalised addresses, which allows for adding, subtracting or relocating the WLS Series Non-contact Switches • Reduces installation/maintenance costs with no wires, conduit, strain relief, clips, connectors, connection boxes, etc.

• Eliminates wire connection integrity issues on moving equipment • Consumes ultra-low power to prolong battery life

Applications

• Machine tools • Packaging machinery • Lifts • Agricultural/construction equipment • Industrial machines

www.ttieurope.com 7

CORPORATE HEADQUARTERS

TTI, Inc. 2441 Northeast Parkway Fort Worth, Texas 76106 U.S.A. T: +1 817 740 9000 F: +1 817 740 9898 E: information@ttiinc.com

EUROPEAN HEADQUARTERS

TTI, Inc. Ganghoferstr. 34 82216 Maisach-Gernlinden Germany T: +49 (0) 81 42 66 80 0 F: +49 (0) 81 42 66 80 490 E: sales@de.ttiinc.com

www.ttieurope.com

TTI, Inc. Sales AUSTRIA

T: +359 (0) 52 51 10 59 F: +359 (0) 52 51 10 59 E: sales.varna@bg.ttiinc.com

Frankfurt T: +49 (0) 6102 5999 100 F: +49 (0) 6102 5999 199 E: sales.frankfurt@de.ttiinc.com Hanover T: +49 (0) 5 11 7 80 59 0 F: +49 (0) 5 11 7 42 49 0 E: sales.hannover@de.ttiinc.com Munich T: +49 (0) 81 42 66 80 110 F: +49 (0) 81 42 66 80 199 E: sales.munich@de.ttiinc.com Pforzheim T: +49 (0) 7231 14788 0 F: +49 (0) 7231 14788 99 E: sales.stuttgart@de.ttiinc.com

CZECH/SLOVAK REPUBLIC

HUNGARY

Vienna T: +43 (0) 18 79 85 90 F: +43 (0) 18 79 85 90 10 E: sales.vienna@at.ttiinc.com

BENELUX

Eindhoven T: +31 (0) 40 290 1616 F: +31 (0) 40 290 1610 E: sales.benelux@nl.ttiinc.com

BULGARIA

Brno T: +420 541 126 714 F: +420 541 126 730 E: sales.brno@cz.ttiinc.com

DENMARK

Copenhagen T: +45 (0) 43 29 35 35 F: +45 (0) 43 29 35 30 E: sales.copenhagen@dk.ttiinc.com Hammel T:+ 45 (0) 38 41 31 00 F:+ 45 (0) 70 70 11 74 E: sales.copenhagen@dk.ttiinc.com

FINLAND & BALTIC REGION Espoo T: +358 98 94 65 200 F: +358 98 94 65 210 E: sales.finland@fi.ttiinc.com

FRANCE

Brive T: +33 (0) 5 55 92 92 93 F: +33 (0) 5 55 92 91 90 E: sales.toulouse@fr.ttiinc.com (Covering North Africa) Bron T: +33 (0) 472 81 2030 F: +33 (0) 472 81 2033 E: sales.lyon@fr.ttiinc.com Bruz T: +33 (0)2 99 77 60 84 F: +33 (0)2 99 41 18 47 E: sales.toulouse@fr.ttiinc.com La Ciotat Cedex T: +33 (0) 442 84 4142 F: +33 (0) 442 84 4220 E: sales.marseille@fr.ttiinc.com Toulouse T: +33 (0) 561 15 0228 F: +33 (0) 561 12 4038 E: sales.toulouse@fr.ttiinc.com Trappes T: +33 (0) 130 13 7380 F: +33 (0) 130 13 7399 Email: sales.paris@fr.ttiinc.com

GERMANY

Berlin T: +49 (0) 30 8877 40 200 F: +49 (0) 30 8877 40 299 E: sales.berlin@de.ttiinc.com Dortmund T: +49 (0) 2301 91 304 0 F: +49 (0) 2301 91 304 11 E: sales.dortmund@de.ttiinc.com

Budapest T: +36 1 40 22 111 F: +36 1 40 22 105 E: sales.hungary@hu.ttiinc.com

ROMANIA

Cluj Napoca T: +40 (0) 264 439 103 F: +40 (0) 264 439 106 E: sales.romania@ro.ttiinc.com

RUSSIA

Saint Petersburg T: +7 812 9726498 F: +7 812 4962053 E: sales.russia@ru.ttiinc.com

SOUTH AFRICA

Johannesburg T: +27 (0) 11 795 2691 F: +27 866 719 753 E: sales.southafrica@za.ttiinc.com

SPAIN

T: +972 (0) 9 7687777 F: +972 (0) 9 7667107 E: sales@il.ttiinc.com

Barcelona T: +34 (0) 93 645 25 75 F: +34 (0) 93 645 25 93 E: sales.barcelona@es.ttiinc.com Madrid T: +34 (0) 91 416 11 90 F: +34 (0) 91 416 12 90 E: sales.madrid@es.ttiinc.com Vizcaya T: +34 (0) 94 623 25 80 F: +34 (0) 94 623 25 81 E: sales.bilbao@es.ttiinc.com

ITALY

SWEDEN

IRELAND

T: +353 (0) 21 480 8070 F: +353 (0) 21 432 3350 E: sales.ireland@ie.ttiinc.com

ISRAEL/Net-Aye

Bologna T: +39 051 632 1863 F: +39 051 713 100 E: sales.milan@it.ttiinc.com Civitanova Marche T: +39 0733 70 474 F: +39 0733 70 92 22 E: sales.milan@it.ttiinc.com Florence T: +39 055 0946 378 F: +39 055 0946 379 E: sales.milan@it.ttiinc.com Milan T: +39 02 822 521 F: +39 02 822 522 33 E: sales.milan@it.ttiinc.com Naples T: +39 081 64 12 33 F: +39 081 71 47 859 E: sales.milan@it.ttiinc.com Padova T: +39 049 774 683 F: +39 049 792 7738 E: sales.milan@it.ttiinc.com

Gothenburg T: +46 (0) 31 741 12 90 F: +46 (0) 31 741 12 91 E: sales.gothenburg@se.ttiinc.com Stockholm T: +46 (0) 8 594 11 800 F: +46 (0) 8 594 11 801 E: sales.stockholm@se.ttiinc.com

NORWAY

UNITED KINGDOM

Drammen T: +47 32 20 09 50 E: sales.norway@no.ttiinc.com

POLAND

Kwidzyn T: +48 (0) 55 279 67 57 F: +48 (0) 55 279 75 50 E: sales.poland@pl.ttiinc.com

PORTUGAL

T: +351 252 493084 F: +351 252 493084 E: sales.barcelona@es.ttiinc.com

SWITZERLAND

Baar T: +41 (0) 41 76741 90 F: +41 (0) 41 76741 99 E: sales.swiss@ch.ttiinc.com

TUNISIA

T: +216 71433144 F: +216 71428539 E: sales.tunis@fr.ttiinc.com

TURKEY

Istanbul T: +90 216 339 2247 F: +90 216 339 2257 E: sales.istanbul@tr.ttiinc.com Basildon T: +44 (0)1268 889520 F: +44 (0)1268 888047 E: sales.essex@uk.ttiinc.com High Wycombe T: +44 (0)1494 460000 F: +44 (0)1494 460090 E: sales.london@uk.ttiinc.com Military Aerospace Office T: +44 (0)1268 889520 F: +44 (0)1268 419225 E: mil-aero@uk.ttiinc.com Stevenage T: +44 (0)1438 794170 F: +44 (0)1438 791139 E: power@uk.ttiinc.com

Contact TTI today to find out what a true specialist can offer.

HON1112V1

TTI, Inc. – Never Short on Solutions