Construction Analysis Flipbook Assignment 3

CONSTRUCTI ON ANALYSI S:FLI PBOOK ASSI GNM ENT 3 HAMPTON HOUSE SECTI ON 7A TetWeyCHEN 828678 2017,Semes t er2

FINAL PLAN

FINAL SECTION

STAGE

DEMOLITION & PREPARATION

1

STAGE

GROUND FLOOR FRAMING

2

STAGE

FIRST FLOOR FLOOR FRAMING

3

STAGE

FIRST FLOOR WALL FRAMING

4

STAGE ROOF FRAMING

5

STAGE

6

ROOF BATTENS, GUTTERS, WINDOW, DOOR, SKYLIGHT FRAMING

STAGE

7

METAL DECK CLADDING & SKYLIGHT GLAZING

STAGE TIMBER RAINSCREEN

8

STAGE

9

STAIR FRAME, BALUSTRADE & LOCKUP

STAGE

10

SERVICES ROUGH IN & INSULATION

STAGE INTERNAL LININGS

11

STAGE FIT OUT & FINISHING

12

STAGE

DEMOLITION & PREPARATION

1

STAGE SEQUENCES: 1. Site boundaries fenced and old house demolished 2. Soil excavated and service pipes installed 3. Ground preparared and vapour barrier installed 4. Formwork and reinforcing bars laid out 5. In-situ concrete poured

SL92 SQUARE MESH (200X200MM) SL92 SQUARE MESH (200X200MM) SAND BED (50MM) SAND BED (50MM) CONTROLLED FILL CONTROLLED FILL VAPOUR BARRIER (0.2MM) VAPOUR BARRIER (0.2MM) 3-L8TM TRENCH MESH 3-L8TM TRENCH MESH BLINDING CONCRETE (50MM MINIMUM) BLINDING CONCRETE (50MM MINIMUM)

INTERNAL INTERNAL RIB RIB DETAIL DETAIL

STUD STUD

CAP CAP SLAB THICKENING (150X500) SLAB THICKENING (150X500) SLAB-ON-GROUND 100MM SLAB-ON-GROUND 100MM SL92 SQUARE MESH (200X200) SL92 SQUARE MESH (200X200) TOP 25MM COVER TOP 25MM COVER BFF5088 PVC ELBOW PIPE (56MM) BFF5088 PVC ELBOW PIPE (56MM) DWV50 PVC SEWER PIPE (50MM) DWV50 PVC SEWER PIPE (50MM)

3-L8TM TRENCH MESH 3-L8TM TRENCH MESH BOTTOM 50MM COVER BOTTOM 50MM COVER

EDGE EDGE BEAM BEAM & & SEWER SEWER PIPE PIPE DETAIL DETAIL

BRAC BRAC

CONTROLLED FILL VAPOUR BARRIER (0.2MM) 3-L8TM TRENCH MESH

STAGE

GROUND FLOOR FRAMING

2

STAGE SEQUENCES: 1. Bottom plates laid and timber stud frames erected 2. Noggings fixed in between studs 3. Looped metal straps and wall bracing nailed to frames

BLINDING CONCRETE (50MM MINIMUM)

LEDGER SCREW TRIP-L-GRIP MGP10 LEDGER (90X45MM) INCLINED MGP10 JOIST (90X45MM)

TIMBER STUD (90X45MM)

INTERNAL RIB DETAIL

STUD WALL TO INCLINED JOIST DETAIL

S

CAP SLAB THICKENING (150X500) SLAB-ON-GROUND 100MM SL92 SQUARE MESH (200X200) TOP 25MM COVER

TOP PLATE (90X45MM)

BFF5088 PVC ELBOW PIPE (56MM) DWV50 PVC SEWER PIPE (50MM)

GALVANIZED LOOPED METAL STRAP (30X0.8MM) GALVANIZED FLAT METAL TENSION BRACING GALVANIZED FLATHEAD NAILS (2.8X30MM)

3-L8TM TRENCH MESH BOTTOM 50MM COVER

EDGE BEAM & SEWER PIPE DETAIL

BRACE & STRAP CONNECTION DETAIL TOP PLATE (90X45MM)

SL92 SQUARE MESH (200X200MM) SAND BED (50MM) CONTROLLED FILL VAPOUR BARRIER (0.2MM) 3-L8TM TRENCH MESH BLINDING CONCRETE (50MM MINIMUM)

LEDGER SCREW TRIP-L-GRIP MGP10 LEDGER (90X45MM) INCLINED MGP10 JOIST (90X45MM)

TIMBER STUD (90X45MM)

INTERNAL RIB DETAIL

STUD WALL TO INCLINED JOIST DETAIL

CAP SLAB THICKENING (150X500) SLAB-ON-GROUND 100MM SL92 SQUARE MESH (200X200) TOP 25MM COVER

TOP PLATE (90X45MM)

BFF5088 PVC ELBOW PIPE (56MM) DWV50 PVC SEWER PIPE (50MM)

GALVANIZED LOOPED METAL STRAP (30X0.8MM) GALVANIZED FLAT METAL TENSION BRACING GALVANIZED FLATHEAD NAILS (2.8X30MM)

3-L8TM TRENCH MESH BOTTOM 50MM COVER

S

EDGE BEAM & SEWER PIPE DETAIL

STAGE

FIRST FLOOR FLOOR FRAMING

BRACE & STRAP CONNECTION DETAIL

3

CHEMSET DETAIL

CHIPBOARD 300 DEEP FLOOR TRUSS METAL JOIST HANGER

STAGE SEQUENCES: 1. Steel columns bolted to slab 2. Floor trusses erected 3. Chipboard placed above floor trusses

NAILING PLATE MGP10 (45 THICK) PARALLEL FLANGE CHANNEL (200X75MM)

SHS COLUMN (89X89X5.0MM)

FLOOR TRUSS DETAIL TOP PLATE (90X45MM) TOP PLATE (90X45MM) SHS COLUMN (89X89X5.0MM) SHS COLUMN (89X89X5.0MM) SL92 SQUARE MESH (200X200MM) SL92 SQUARE MESH (200X200MM) SAND BED (50MM)

REBATED SLAB (50MM)

CONTROLLED FILL SAND BED (50MM) CONTROLLED FILL VAPOUR BARRIER (0.2MM) VAPOUR BARRIER (0.2MM) 3-L8TM TRENCH MESH 3-L8TM TRENCH MESH BLINDING CONCRETE (50MM MINIMUM) BLINDING CONCRETE (50MM MINIMUM)

REBATED SLAB (50MM) BASE PLATE CFW TO SHS COLUMN (10MM) LEDGER SCREW

BASE PLATE CFW(18X190MM) TO SHS COLUMN (10MM) M16 CHEMSETS

LEDGER SCREW TRIP-L-GRIP

M16 CHEMSETS (18X190MM) NON-SHRINK GROUT (10MM)

TRIP-L-GRIP MGP10 LEDGER (90X45MM)

NON-SHRINK GROUT (10MM)

INCLINED MGP10(90X45MM) JOIST (90X45MM) MGP10 LEDGER INCLINED MGP10 JOIST (90X45MM) TIMBER STUD (90X45MM) TIMBER STUD (90X45MM)

INTERNAL RIB DETAIL INTERNAL RIB DETAIL

STUD WALL TO INCLINED JOIST DETAIL STUD WALL TO INCLINED JOIST DETAIL

CAP

STEEL COLUMN BASE DETAIL STEEL COLUMN BASE DETAIL

SHS COLUMN (89X89X5.0MM)

CAP SLAB THICKENING (150X500)

SHS COLUMN (89X89X5.0MM)

SLAB THICKENING (150X500) SLAB-ON-GROUND 100MM SLAB-ON-GROUND 100MM SL92 SQUARE MESH (200X200) TOP COVER SL92 25MM SQUARE MESH (200X200)

TOP 25MM COVER BFF5088 PVC ELBOW PIPE (56MM) BFF5088 PVC ELBOW PIPE (56MM) DWV50 PVC SEWER PIPE (50MM) DWV50 PVC SEWER PIPE (50MM)

BASE PLATE CFW TO SHS COLUMN (10MM) TOP PLATE (90X45MM) TOP PLATE (90X45MM)

BASE PLATE CFW TO SHS COLUMN (10MM) M16 CHEMSET (18X190MM) M16 CHEMSETGROUT (18X190MM) NON-SHRINK (10MM) NON-SHRINK GROUT (10MM)

GALVANIZED LOOPED METAL STRAP (30X0.8MM) GALVANIZED LOOPED METAL STRAP

GALVANIZED FLAT METAL TENSION BRACING (30X0.8MM) GALVANIZED FLAT METAL TENSION BRACING GALVANIZED FLATHEAD NAILS (2.8X30MM)

3-L8TM TRENCH MESH BOTTOM 50MM COVER 3-L8TM TRENCH MESH BOTTOM 50MM COVER

EDGE BEAM & SEWER PIPE DETAIL EDGE BEAM & SEWER PIPE DETAIL

GALVANIZED FLATHEAD NAILS (2.8X30MM)

BRACE & STRAP CONNECTION DETAIL BRACE & STRAP CONNECTION DETAIL

CHEMSET DETAIL CHEMSET DETAIL

STAGE

FIRST FLOOR WALL FRAMING

4

STAGE SEQUENCES: 1. First floor frames erected 2. Lintels installed for door openings

GALVANIZED LOOPED METAL STRAP (30X0.8MM) MPG10 TOP PLATE (45X90MM) MPG10 JACK STUD (45X90MM) GALVANIZED FLATHEAD NAILS (2.8X40MM)

LINTEL (190X45MM) MPG10 DOUBLE STUD

LINTEL TO DOUBLE STUD DETAIL

R

RIDGE &

STAGE ROOF FRAMING

STAGE SEQUENCES: 1. Structural steel ridge erected 2. Timber hip rafter connected to steel ridge 3. Common and jack rafters installed

5 GALVANIZED LOOPED METAL STRAP GALVANIZED LOOPED METAL STRAP (30X0.8MM) (30X0.8MM) MPG10 TOP PLATE (45X90MM) MPG10 TOP PLATE (45X90MM) MPG10 JACK STUD (45X90MM) MPG10 JACK STUD (45X90MM) GALVANIZED FLATHEAD NAILS (2.8X40MM) GALVANIZED FLATHEAD NAILS (2.8X40MM)

CRANKED PFC RIDGE (200X75MM) CRANKED PFC RIDGE (200X75MM) MS CLEAT CFW TO CRANKED PFC RIDGE MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) (10MM) 2M16 BOLTS (18X190MM) 2M16 BOLTS (18X190MM) F17 KDH HIP RAFTER (2/190X45MM) F17 KDH HIP RAFTER (2/190X45MM)

LINTEL (190X45MM) LINTEL (190X45MM)

MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM)

MPG10 DOUBLE STUD MPG10 DOUBLE STUD MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM)

LINTEL TO TO DOUBLE DOUBLE STUD STUD DETAIL DETAIL LINTEL

RIDGE & & HIP HIP RAFTER RAFTER DETAIL DETAIL RIDGE

R R

MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) 2M16 BOLTS (18X190MM) 2M16 BOLTS (18X190MM) MIRTE CUT & FSBW PFC RIDGE (200X75MM) MIRTE CUT & FSBW PFC RIDGE (200X75MM) MS CLEAT CFW TO CRANKED PFC RIDGE MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) (10MM)

RIDGE RIDGE & & HIP HIP RAFTER RAFTER CONNECTION CONNECTION DETAIL DETAIL

RAFTER RAFTER

STAGE

6

ROOF BATTENS, GUTTERS, WINDOW, DOOR, SKYLIGHT FRAMING STAGE SEQUENCES: 1. Box gutters installed 2. Battens laid across rafters 3. Sarking is covered throughout the house 4. Window frames installed

GALVANIZED LOOPED METAL STRAP (30X0.8MM) GALVANIZED LOOPED METAL STRAP (30X0.8MM) MPG10 TOP PLATE (45X90MM) MPG10 TOP PLATE (45X90MM) MPG10 JACK STUD (45X90MM) MPG10 JACK STUD (45X90MM) GALVANIZED FLATHEAD NAILS (2.8X40MM) GALVANIZED FLATHEAD NAILS (2.8X40MM)

LINTEL (190X45MM) LINTEL (190X45MM) MPG10 DOUBLE STUD MPG10 DOUBLE STUD

LINTEL TO DOUBLE STUD DETAIL LINTEL TO DOUBLE STUD DETAIL

ROOF SARKING ROOF SARKING CRANKED PFC RIDGE (200X75MM) CRANKED PFC RIDGE (200X75MM) MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) 2M16 BOLTS (18X190MM) 2M16 BOLTS (18X190MM) F17 KDH HIP RAFTER (2/190X45MM) F17 KDH HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM)

MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM)

RIDGE & HIP RAFTER DETAIL RIDGE & HIP RAFTER DETAIL

PAINTED TREATED PINE BATTEN (40X40MM) PAINTED TREATED PINE BATTEN (40X40MM)

BOX GUTTER BOX GUTTER FLASHING FLASHING DOWNPIPE DOWNPIPE EXTERNAL WALL SARKING EXTERNAL WALL SARKING MGP10 RAFTERS (190X45MM) MGP10 RAFTERS (190X45MM) TRIPLE GRIP TRIPLE GRIP MGP10 TOP PLATE (90X45MM) MGP10 TOP PLATE (90X45MM)

RAFTER TO TOP PLATE DETAIL RAFTER TO TOP PLATE DETAIL

MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) MGP10 HIP RAFTER (2/190X45MM) 2M16 BOLTS (18X190MM) 2M16 BOLTS (18X190MM) MIRTE CUT & FSBW PFC RIDGE (200X75MM) MIRTE CUT & FSBW PFC RIDGE (200X75MM) MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) MS CLEAT CFW TO CRANKED PFC RIDGE (10MM)

RIDGE & HIP RAFTER CONNECTION DETAIL RIDGE & HIP RAFTER CONNECTION DETAIL

TOP PLATE TOP PLATE TRIPLE GRIP TRIPLE GRIP

RAFTER TO SUPPORT CONNECTION DETAIL RAFTER TO SUPPORT CONNECTION DETAIL

STAGE

7

METAL DECK CLADDING & SKYLIGHT GLAZING

STAGE SEQUENCES: 1. Metal deck cladding fixed to battens underneath 2. Flashings installed to junctions 3. Another layer of battens installed above metal deck cladding 4. Battens and metal deck cladding on the roof are cut to make way for skylight and glazing installation

METAL METAL DECK DECK CLADDING CLADDING METAL GASKET DECK CLADDING FOAM FOAM GASKET FOAM GASKET PAINTED TREATED PINE PINE BATTEN BATTEN (40X40MM) (40X40MM) PAINTED TREATED PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING ROOF SARKING ROOF SARKING EDW HEAD HEAD FLASHING FLASHING EDW EDW HEAD FLASHING S06 S06 VELUX VELUX FIXED FIXED SKYLIGHT SKYLIGHT (1140X1180MM) (1140X1180MM) FS 2004 DOUBLE GLAZING FS DOUBLE S062004 VELUX FIXED GLAZING SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

SKYLIGHT & HEAD FLASHING DETAIL SKYLIGHT & HEAD FLASHING DETAIL

S06 S06 VELUX VELUX FIXED FIXED SKYLIGHT SKYLIGHT (1140X1180MM) (1140X1180MM) FS 2004 DOUBLE GLAZING FS DOUBLE S062004 VELUX FIXED GLAZING SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

EDW EDW BOTTOM BOTTOM FLASHING FLASHING EDW BOTTOM FLASHING PAINTED PAINTED TREATED TREATED PINE PINE BATTEN BATTEN (40X40MM) (40X40MM) PAINTED TREATED PINE BATTEN (40X40MM) ROOF ROOF SARKING SARKING ROOF SARKING

SKYLIGHT & BOTTOM FLASHING DETAIL SKYLIGHT & BOTTOM FLASHING DETAIL METAL DECK DECK CLADDING CLADDING METAL METAL DECK CLADDING

S06 VELUX FIXED FIXED SKYLIGHT SKYLIGHT (1140X1180MM) (1140X1180MM) S06 VELUX FS 2004 2004 DOUBLE DOUBLE GLAZING GLAZING FS S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

EDW FLASHING FLASHING UNDER UNDER METAL METAL DECK DECK EDW CLADDING CLADDING EDW FLASHING UNDER METAL DECK CLADDING OVERLAPPING ROOF ROOF SARKING SARKING OVERLAPPING OVERLAPPING ROOF SARKING

SKYLIGHT & FLASHING PLAN DETAIL SKYLIGHT & FLASHING PLAN DETAIL

TIMBER TIMBER

STAGE TIMBER RAINSCREEN

STAGE SEQUENCES: 1. Timber rainscreen fixed to battens 2. Rainscreen coated 3 times

8 METAL DECK CLADDING METAL CLADDING FOAM DECK GASKET FOAM GASKET PAINTED TREATED PINE BATTEN (40X40MM) PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING ROOF SARKING EDW HEAD FLASHING

TIMBER RAINSCREEN TIMBER RAINSCREEN PAINTED TREATED PINE BATTEN (40X40MM)

EDW HEAD FLASHING

PAINTED TREATED PINE BATTEN (40X40MM) METAL CLADDING

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN)

METAL CLADDING BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN)

TREATED PINE BATTEN (40X40MM) TREATED PINE BATTEN (40X40MM)

SKYLIGHT & HEAD FLASHING DETAIL SKYLIGHT & HEAD FLASHING DETAIL

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

TIMBER RAINSCREEN DETAIL TIMBER RAINSCREEN DETAIL

TIMBER RAINSCREEN TIMBER RAINSCREEN BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) ROOF SARKING

EDW BOTTOM FLASHING EDW BOTTOM FLASHING PAINTED TREATED PINE BATTEN (40X40MM) PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING

ROOF METALSARKING DECK CLADDING METAL DECK CLADDING PAINTED TREATED PINE BATTEN (40X40MM) PAINTED PINE (40X40MM) BATTEN (40X40MM) TREATEDTREATED PINE BATTEN TREATED PINE BATTEN (40X40MM)

ROOF SARKING

SKYLIGHT & BOTTOM FLASHING DETAIL SKYLIGHT & BOTTOM FLASHING DETAIL METAL DECK CLADDING METAL DECK CLADDING

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

EDW FLASHING UNDER METAL DECK CLADDING EDW FLASHING UNDER METAL DECK

TIMBER RAINSCREEN CONNECTION DETAIL TIMBER RAINSCREEN CONNECTION DETAIL

B

STAGE

9

STAIR FRAME, BALUSTRADE & LOCKUP STAGE SEQUENCES: 1. Stair frames are erected 2. Structural balustrade installed 3. Window and doors fitted and installed

METAL DECK CLADDING FOAM GASKET

TIMBER STRUCTURE BALUSTRADE

PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING

EDW HEAD FLASHING

TIMBER RAINSCREEN

PAINTED TREATED PINE BATTEN (40X40MM) METAL CLADDING

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN)

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

TIMBER RAINSCREEN DETAIL

TIMBER RAINSCREEN

BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) ROOF SARKING EDW BOTTOM FLASHING PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING

300 DEEP FLOOR TRUSS TIMBER SUPPORTS M16 BOLTS (18X190MM) PARALLEL FLANGE CHANNEL (200X75MM)

TREATED PINE BATTEN (40X40MM)

SKYLIGHT & HEAD FLASHING DETAIL

CHIPBOARD

METAL DECK CLADDING PAINTED TREATED PINE BATTEN (40X40MM) TREATED PINE BATTEN (40X40MM)

SHS COLUMN (89X89X5.0MM)

BALUSTRADE DETAIL DETAIL

SWITCH BOX CAVITY IN STUD ELECTRICAL CABLE

STAGE

10

TIMBER STUDS (90X45MM)

SERVICES ROUGH IN & INSULATION

STAGE SEQUENCES: 1. Services roughed into walls, ceilings and floors 2. Insulations fitted between timber studs 3. Furring channels fixed under rafters and floor joists

ROUGH IN & STUD CAVITY DETAIL

TIMB

2/190X45 F17 KDHW RAFTERS (2/190X45MM)

FURRING CHANNEL NAILED TO BOTTOM OF RAFTER

FURRING CHANNEL DETAIL

SWITCH BOX CAVITY IN STUD ELECTRICAL CABLE

TIMBER STUDS (90X45MM)

ROUGH IN & STUD CAVITY DETAIL

2/190X45 F17 KDHW RAFTERS (2/190X45MM)

FURRING CHANNEL NAILED TO BOTTOM OF RAFTER

TIMB

STAGE INTERNAL LININGS

11

STAGE SEQUENCES: 1. Plasterboards are cut and installed 2. Plaster-based cement applied to the gaps and screws 3. First layer of paint goes onto the plasterboard 4. Raised floor battens are laid on ground in preparation for timber floorboards installation 5. Tiles laid in bathroom floor and walls

TIMBER RAINSCREEN PAINTED TREATED PINE BATTEN (40X40MM) SWITCH BOX CAVITY IN STUD ELECTRICAL CABLE

METAL DECK CLADDING INSULATION PLASTERBOARD (10MM) TIMBER FLOORBOARD

TIMBER STUDS (90X45MM)

FLOOR BATTENS (35X70MM)

RECTANGULAR DOWNPIPE (150X50MM) CONNECTED TO BELOW GROUND WATER TANK

ROUGH IN & STUD CAVITY DETAIL

2/190X45 F17 KDHW RAFTERS (2/190X45MM)

FURRING CHANNEL NAILED TO BOTTOM OF RAFTER

TIMBER STUD TO CONCRETE DETAIL

STAGE FIT OUT & FINISHING

12

STAGE SEQUENCES: 1. Installation of cabinets, joinery in bedrooms, kitchen living area and toilet 2. Finalising electrical elements including lightings, switches and built-in appliances.

3. Installing fittings and fixtures like sinks, basins, sho wers 4. Fixing skirting and architraves throughout building 5. Painting final layer of coat on all walls and ceiling

TIMBER RAINSCREEN

SWITCH BOX CAVITY IN STUD ELECTRICAL CABLE

TIMBER STUDS (90X45MM)

TIMBER RAINSCREEN

PAINTED TREATED PINE BATTEN (40X40MM)

PAINTED TREATED PINE BATTEN (40X40MM)

METAL DECK CLADDING

METAL DECK CLADDING

ROOF SARKING

INSULATION PLASTERBOARD (10MM) TIMBER FLOORBOARD

BOX GUTTER

FLOOR BATTENS (35X70MM)

FLASHING GOES AROUND BOX GUTTER AND FIXED UNDER BATTEN WALL SARKING BEHIND METAL DECK CLAD INSULATION

RECTANGULAR DOWNPIPE (150X50MM) CONNECTED TO BELOW GROUND WATER TANK

ROUGH IN & STUD CAVITY DETAIL

2/190X45 F17 KDHW RAFTERS (2/190X45MM)

FURRING CHANNEL NAILED TO BOTTOM OF RAFTER

TIMBER STUD TO CONCRETE DETAIL

PLASTERBOARD

GUTTER DETAIL

NON-SHRINK GROUT (10MM)

BFF5088 PVC ELBOW PIPE (56MM) DWV50 PVC SEWER PIPE (50MM)

GALVANIZED LOOPED METAL STRAP (30X0.8MM) GALVANIZED FLAT METAL TENSION BRACING GALVANIZED FLATHEAD NAILS (2.8X30MM)

SELECTED DETAILS

3-L8TM TRENCH MESH BOTTOM 50MM COVER

EDGE BEAM & SEWER PIPE DETAIL

BRACE & STRAP CONNECTION DETAIL

CHEMSET DETAIL

TOP PLATE (90X45MM)

ROOF SARKING

SHS COLUMN (89X89X5.0MM)

SAND BED (50MM)

REBATED SLAB (50MM)

CONTROLLED FILL VAPOUR BARRIER (0.2MM) 3-L8TM TRENCH MESH BLINDING CONCRETE (50MM MINIMUM)

BASE PLATE CFW TO SHS COLUMN (10MM) METAL DECK CLADDING LEDGER SCREW

TRIP-L-GRIP FOAM GASKET MGP10 LEDGER PAINTED TREATED(90X45MM) PINE BATTEN (40X40MM) INCLINED MGP10 JOIST (90X45MM) ROOF SARKING

EDW HEAD FLASHING TIMBER STUD (90X45MM)

INTERNAL RIB DETAIL

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

STUD WALL TO INCLINED JOIST DETAIL

M16 CHEMSETS (18X190MM)

CAP

SLAB-ON-GROUND 100MM

NON-SHRINK GROUT (10MM)

NAILING PLATE MGP10 (45 THICK) TIMBER STRUCTURE BALUSTRADE

CHIPBOARD PARALLEL FLANGE CHANNEL (200X75MM) LINTEL (190X45MM)

PAINTED TREATED PINE BATTEN (40X40MM) METAL CLADDING BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN)

STEEL COLUMN BASE DETAIL

SHS COLUMN (89X89X5.0MM)

SKYLIGHT & HEAD FLASHING DETAIL

TIMBER RAINSCREEN DETAIL BASE PLATE CFW TO SHS COLUMN (10MM)

SL92 SQUARE MESH (200X200) TOP 25MM COVER

TOP PLATE (90X45MM)

BFF5088 PVC ELBOW PIPE (56MM)

METAL DECK CLADDING

DWV50 PVC SEWER PIPE (50MM)

FOAM GASKET GALVANIZED LOOPED METAL STRAP S06 VELUX FIXED SKYLIGHT (1140X1180MM) (30X0.8MM) PAINTED TREATED PINE BATTEN (40X40MM) FS 2004 DOUBLE GLAZING GALVANIZED FLAT METAL TENSION BRACING ROOF SARKING

M16 CHEMSET (18X190MM) NON-SHRINK GROUT (10MM)

EDW HEAD FLASHING

S06 VELUX FIXED SKYLIGHT (1140X1180MM) EDW BOTTOM FS 2004 DOUBLEFLASHING GLAZING

EDGE BEAM & SEWER PIPE DETAIL

PAINTED TREATED PINE BATTEN (40X40MM) BRACE & STRAP CONNECTION DETAIL ROOF SARKING

SKYLIGHT & HEAD FLASHING DETAIL SKYLIGHT & BOTTOM FLASHING DETAIL

PAINTED TREATED PINE BATTEN (40X40MM) BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) METAL CLADDING ROOF SARKING BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) METAL DECK CLADDING PAINTED TREATED PINE BATTEN (40X40MM)

CHEMSET DETAIL TREATED PINE BATTEN (40X40MM)

TREATED PINE BATTEN (40X40MM)

TIMBER RAINSCREEN DETAIL DETAIL TIMBER RAINSCREEN CONNECTION CHIPBOARD

SHS COLUMN (89X89X5.0MM)

TIMBER SUPPORTS

METAL DECK CLADDING FOAM GASKET PAINTED TREATED PINE BATTEN (40X40MM)

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

ROOF SARKING

TIMBER RAINSCREEN S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

EDW HEAD FLASHING

PAINTED TREATED PINE BATTEN (40X40MM)

S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

300 DEEP FLOOR TRUSS BOLTCOLUMN FIXTURES(89X89X5.0MM) (RAINSCREEN FIXED TO BATTEN) SHS TIMBER SUPPORTS ROOF SARKING

BOLT BOTTOM FIXTURES (RAINSCREEN FIXED TO BATTEN) EDW FLASHING

METAL DECK CLADDING M16 BOLTS (18X190MM) PAINTED BATTEN(200X75MM) (40X40MM) PARALLELTREATED FLANGEPINE CHANNEL

ROOF SARKING OVERLAPPING ROOF SARKING TREATED PINE BATTEN (40X40MM)

SKYLIGHT & HEAD FLASHING DETAIL

PARALLEL FLANGE CHANNEL (200X75MM) TIMBER RAINSCREEN CHIPBOARD

METAL CLADDING

PAINTED TREATED PINE BATTEN (40X40MM) EDW FLASHING UNDER METAL DECK CLADDING

SKYLIGHT FLASHING PLAN DETAIL TIMBER RAINSCREEN DETAIL SKYLIGHT &&BOTTOM FLASHING DETAIL

PARALLEL FLANGE CHANNEL (200X75MM)

LINTEL TO DOUBLE STUD DETAIL FLOOR TRUSS DETAIL

MPG10 TOP PLATE (45X90MM) MPG10 JACK STUD (45X90MM) GALVANIZED FLATHEAD NAILS (2.8X40MM)

CHIPBOARD LINTEL (190X45MM)

EDW EDW HEAD HEAD FLASHING FLASHING

METAL METAL CLADDING CLADDING ROOF SARKING EDW BOTTOM S06 VELUX FIXED SKYLIGHT S06 VELUX FIXEDFLASHING SKYLIGHT (1140X1180MM) (1140X1180MM) FS FS 2004 2004 DOUBLE DOUBLE GLAZING GLAZING PAINTED TREATED PINE BATTEN (40X40MM) ROOF SARKING

METAL DECK CLADDING BOLT FIXTURES (RAINSCREEN BOLT FIXTURES (RAINSCREEN FIXED FIXED TO TO BATTEN) BATTEN) PAINTED TREATED PINE BATTEN (40X40MM) EDW FLASHING UNDER METAL DECK CLADDING TREATED PINE BATTEN (40X40MM)

TIMBER SUPPORTS

PARALLEL FLANGE CHANNEL (200X75MM)

LINTEL TO DOUBLE STUD DETAIL

BALUSTRADE DETAIL DETAIL

SKYLIGHT HEAD DETAIL SKYLIGHT&& &BOTTOM HEAD FLASHING FLASHING DETAIL SKYLIGHT FLASHING DETAIL

SKYLIGHT & FLASHING PLAN DETAIL TIMBER TIMBER RAINSCREEN CONNECTION RAINSCREEN DETAIL TIMBER RAINSCREEN DETAIL DETAIL

METAL DECK CLADDING

S06 S06 VELUX VELUX FIXED FIXED SKYLIGHT SKYLIGHT (1140X1180MM) (1140X1180MM) FS FS 2004 2004 DOUBLE DOUBLE GLAZING GLAZING S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING

TIMBER TIMBER RAINSCREEN RAINSCREEN

TRIPLE GRIP MGP10 TOP PLATE (90X45MM)

RAFTER TO TOP PLATE DETAIL

MGP10 HIP RAFTER (2/190X45MM) CRANKED PFC RIDGE (200X75MM) MGP10 HIP RAFTER (2/190X45MM)

PAINTED TREATED PINE BATTEN (40X40MM)

MS CLEAT CFW TO CRANKED PFC RIDGE 2M16 BOLTS (18X190MM) (10MM) 2M16 BOLTS (18X190MM) MIRTE CUT & FSBW PFC RIDGE (200X75MM) F17 KDH HIP RAFTER (2/190X45MM) MS CLEAT CFW TO CRANKED PFC RIDGE (10MM) MGP10 HIP RAFTER (2/190X45MM)

BOX TOPGUTTER PLATE FLASHING TRIPLE GRIP DOWNPIPE EXTERNAL WALL SARKING MGP10 RAFTERS (190X45MM)

MGP10 HIP RAFTER (2/190X45MM)

& HIP RAFTER DETAIL DETAIL RIDGE RIDGE & HIP RAFTER CONNECTION

TRIPLE GRIP MGP10 TOP PLATE (90X45MM)

RAFTER TO TOPCONNECTION PLATE DETAIL DETAIL RAFTER TO SUPPORT

MGP10 HIP RAFTER (2/190X45MM)

2M16 BOLTS (18X190MM) TIMBER RAINSCREEN

MIRTE CUT & FSBW PFC RIDGE (200X75MM) TIMBER RAINSCREEN SWITCH BOX CAVITY IN STUD ELECTRICAL CABLE

PAINTED TREATED PINE BATTEN PFC (40X40MM) MS CLEAT CFW TO CRANKED RIDGE (10MM) METAL DECK CLADDING

PAINTED TREATED PINE BATTEN (40X40MM) TOP PLATE METAL DECK CLADDING TRIPLE GRIP ROOF SARKING

INSULATION PLASTERBOARD (10MM) TIMBER FLOORBOARD

TIMBER STUDS (90X45MM)

FLOOR BATTENS (35X70MM)

BOX GUTTER FLASHING GOES AROUND BOX GUTTER AND FIXED UNDER BATTEN WALL SARKING BEHIND METAL DECK CLAD

RIDGE & HIP RAFTER CONNECTION DETAIL RECTANGULAR DOWNPIPE (150X50MM)

CONNECTED TO BELOW GROUND WATER TANK

ROUGH IN & STUD CAVITY DETAIL

2/190X45 F17 KDHW RAFTERS (2/190X45MM)

FURRING CHANNEL NAILED TO BOTTOM OF RAFTER

M16 M16 BOLTS BOLTS (18X190MM) (18X190MM) PARALLEL PARALLEL FLANGE FLANGE CHANNEL CHANNEL (200X75MM) (200X75MM)

SHS SHS COLUMN COLUMN (89X89X5.0MM) (89X89X5.0MM)

BALUSTRADE BALUSTRADE DETAIL DETAIL DETAIL DETAIL

EXTERNAL WALL SARKING

MGP10 HIP RAFTER (2/190X45MM)

300 300 DEEP DEEP FLOOR FLOOR TRUSS TRUSS TIMBER TIMBER SUPPORTS SUPPORTS

DOWNPIPE

SHS COLUMN (89X89X5.0MM)

SHS COLUMN (89X89X5.0MM)

CHIPBOARD CHIPBOARD

FLASHING

M16 BOLTS (18X190MM)

OVERLAPPING ROOF SARKING TREATED TREATED PINE PINE BATTEN BATTEN (40X40MM) (40X40MM)

RIDGE & HIP RAFTER DETAIL

MPG10 DOUBLE STUD

FLOOR TRUSS DETAIL TREATED PINE BATTEN (40X40MM)

TIMBER RAINSCREEN BALUSTRADE CONNECTION DETAIL DETAIL DETAIL

BOX GUTTER

MGP10 RAFTERS (190X45MM) MGP10 HIP RAFTER (2/190X45MM)

300 DEEP FLOOR TRUSS

TIMBER TIMBER STRUCTURE STRUCTURE BALUSTRADE BALUSTRADE TIMBER RAINSCREEN S06 VELUX FIXED SKYLIGHT (1140X1180MM) TIMBER TIMBER RAINSCREEN RAINSCREEN FS 2004 DOUBLE GLAZING BOLT FIXTURES (RAINSCREEN FIXED TO BATTEN) PAINTED PAINTED TREATED TREATED PINE PINE BATTEN BATTEN (40X40MM) (40X40MM)

MGP10 HIP RAFTER (2/190X45MM)

ROOF SARKING GALVANIZED LOOPED METAL STRAP

(30X0.8MM) BALUSTRADE DETAIL DETAIL

METAL METAL DECK DECK CLADDING CLADDING

ROOF ROOF SARKING SARKING

F17 KDH HIP RAFTER (2/190X45MM)

SHS COLUMN (89X89X5.0MM)

METAL DECK CLADDING

FOAM GASKET FOAM GASKET S06 VELUX FIXED SKYLIGHT (1140X1180MM) FS 2004 DOUBLE GLAZING PAINTED PAINTED TREATED TREATED PINE PINE BATTEN BATTEN (40X40MM) (40X40MM)

2M16 BOLTS (18X190MM)

METAL JOIST HANGER NAILING PLATE MGP10 (45 THICK) TIMBER STRUCTURE BALUSTRADE

PAINTED TREATED PINE BATTEN (40X40MM)

MS CLEAT CFW TO CRANKED PFC RIDGE (10MM)

M16 BOLTS (18X190MM)

300 DEEP FLOOR TRUSS

METAL DECK CLADDING

CRANKED PFC RIDGE (200X75MM)

300 DEEP FLOOR TRUSS MPG10 DOUBLE STUD

TIMBER STRUCTURE BALUSTRADE TIMBER TIMBER RAINSCREEN RAINSCREEN

GALVANIZED FLATHEAD NAILS (2.8X30MM) 3-L8TM TRENCH MESH BOTTOM 50MM COVER

MPG10 JACK STUD (45X90MM) 300 DEEP FLOOR TRUSS GALVANIZED FLATHEAD NAILS (2.8X40MM) METAL JOIST HANGER

TIMBER RAINSCREEN

TREATED PINE BATTEN (40X40MM)

SLAB THICKENING (150X500)

GALVANIZED LOOPED METAL STRAP (30X0.8MM)

CHIPBOARD MPG10 TOP PLATE (45X90MM)

SL92 SQUARE MESH (200X200MM)

FURRING CHANNEL DETAIL

TIMBER STUD TO CONCRETE DETAIL

INSULATION

RAFTER TO SUPPORT CONNECTION DETAIL PLASTERBOARD

GUTTER DETAIL

SELECTED PHOTOGRAPHS Stage 1

Stage 2

Stage 3

Stage 4

Stage 5

Stage 6

Stage 7

Stage 8

Stage 9

Stage 10

Stage 11

Stage 12

NARRATION TRANSCRIPT BY: TET WEY CHEN, 828678 0. Hey, how’s it going, I’m Tet Wey Chen. My project study is the Hampton House by Jackson Clement Burrows.

In this video, I will be going through Section 7A of the house which is based on the stairway, water closet and the skylight.

1. Before the construction has begun, the boundaries of the site are fenced to prevent damage to adjacent properties. The old single-storey bungalow was demolished and previous underground pipes were removed prior to excavation. New water and sewerage pipes are installed in my section in preparation for water closet on the ground floor. The sand bed and blinding concrete are levelled and prepared before laying a sheet of vapour barrier on top. This layer of barrier prevents water from getting to the slab. Timber formworks are fixed, followed by square reinforcing mesh under the classification of SL92 with a diameter of 9mm bars in a grid of 200mm apart. Bar chairs are used to achieve sufficient cover of concrete over the mesh. Once everything is set out, in-situ concrete is poured in accordance with AS 2870 Residential Slab and Footing.

2. After a week of curing, the slab is firm enough to be worked on. Ground floor timber structures are firstly erected. Continuous rows of noggings are installed in between stud walls. Wall bracings, are permanently fixed to studs to resist horizontal racking forces applied to the building, and the top plate is fixed to timber studs with looped metal straps. These metal connections are required to be corrosion protected according to AS 1684 Residential Timber Framed Construction.

3. Then, the building’s structural steel frames are erected. Square hollow sections are welded to base plates with continuous fillet and bolted into the concrete slab with two M16 chemsets. Non-shrink grout will also be applied under the base plates to provide good contact with the concrete slab. 300 deep floor trusses are erected on the first-floor frame. The benefit of these floor trusses are its lightweight capabilities and its open-web structure, it offers more flexibility for plumbing and electrical services to be installed without the necessity of cutting or drilling holes. A layer of chipboard is placed above the floor trusses for safety precautions and a surface for trades to work on the first floor.

4. After the floor frames are done, the first-floor timber structures are erected. Similarly, all metal connections are required to be corrosion protected. Openings such as doors are framed with double studs and lintel.

5. Next, Cranked Parallel Flange Channel is installed as the ridge of the roof. 10mm thick cleat plates are welded to the PFC with continuous fillet. This is followed by bolting double Kiln-Dried Hardwood HIP RAFTERS to the cleat plates with M16 bolts to fix the ridge and hip rafters together. With the structural members in place, the next step is to lay timber rafters across the roof at 450 centres. The rafters are notched at one end and it is connected to the top plates with triple grips.

6. Quickly after the timber structures are complete, battens are laid on top in perpendicular to the rafters. Then, the guttering installers begin to install box gutters around the perimeters of the roof. A layer of reflective foil sarking is then covered throughout the house, and house is now waterproofed. External window frames are installed and the sarkings are cut around it and overlapped to make way for openings.

7. After that, the metal deck cladding is fixed to the battens underneath, and flashings are installed to places where water may collect. Another layer of batten is fixed on the cladding. These battens are treated and painted black because they will be exposed to weather conditions. The battens and metal deck cladding on the roof are cut to make way for skylight and glazing installation. A Velux double glazed fixed skylight is installed with EDW flashing to divert water around the opening.

8. The façade of the building is finished with Spotted Gum timber rainscreen. It will be fixed to the painted battens on metal cladding. The rainscreens are then coated 3 times for optimum weathering protection. The excess edges of the timber rainscreen will be trimmed later for its final appearance.

9. Stair frames as well as structural balustrade frames are erected prior to lock-up stage to prevent glazings from being damaged. Timber supports are bolted to the PFC to allow the balustrade to be installed directly above it.

After that, external windows and doors are installed and the house can be properly secured. It is now safe to bring in appliances and fixtures which might otherwise run the risk of being stolen.

10. Multiple trades are working concurrently at this stage to rough in services such as heating system, water pipes, gas pipe, electrical cables and sewerage pipes. Electrical cables are fitted by the electrician in accordance with AS 3000. Pink Batt insulations are fitted between studs and rafters, and Furring channels are fixed under rafters and floor joists to hold them in place.

11. Plasterers are deployed to install Gypsum plasterboards for the internal linings. The plasterboards are delivered to site in standard sizes, they will have to cut it into appropriate sizes, install them and finish the edges in accordance to AS 2588. Raised floor battens are laid on ground in preparation for timber floorboard installation.

Tiles are laid in bathrooms and walls. However, my section of water closet is finished with plasterboard and timber floorboards instead of tiles so long as the floor is water-resistant according to AS 3740.

12. Finally, trades are working simultaneously for finishing touches of the house. Installation of cabinets and joinery in rooms are done. Electrical elements including lightings, switches and appliances has been finalised. Skirtings and architraves are fixed throughout the building and a final layer of paint is painted on all walls and ceilings.