Engine - Engine and crankcase

Engine - Install W ARNING

Heavy objects!

Lift and handle all heavy components using lifting equipment with adequate capacity . Always support units parts with suitable slings hooks. Make sure the work area clear all bystanders.

Failure comply could result death serious injury

W Arning

A void injury!

W0398A

Handle all parts carefully not place your hands fingers between Use Personal Protective Equipment (PPE) indicated this manual, including protective goggles, gloves, and safety footwear

Failure comply could result death serious injury . W0208A

W Arning

Hot liquid under pressure!

Never remove the filler cap the recovery tank cap while the engine running the coolant Let the system cool. T urn the filler cap the first notch and allow any pressure escape, and then remove the filler Loosen the recovery tank cap slowly allow any pressure

Failure comply could result death serious injury . W0296A

Use overhead hoist (1) lift the engine (2)

Place the engine the chassis mounts.

Install four M14 engine mount retaining nuts (1) .

NOTICE: Ensure that all necessary hoses and electrical connectors have been connected may also necessary connect additional items due other optional systems being installed the tractor

Connect the negative ( ground cable installing bolt (1)

Connect the positive (+) battery cable the starter tor Install the nut and the rubber cover (2)

Connect

Engine - Engine and crankcase

Fill the coolant the proper use Ethylene Glycol coolant

NOTE: Engine coolant capacity 3.8 l ( 1 gal ) Connect the negative ( battery terminal (1)