Clutch - Clutch and components

Clutch and components - Dynamic description

NHIL16CT00305F A 1

(1) Clutch cover (4) Release bearing (7) Clutch release lever (10) Flywheel

(2) Clutch disc (5) Release bearing hub (8) Clutch lever shaft Diaphragm boss (3) Diaphragm spring (6) Clutch main shaft (9) Pressure plate

The clutch assembly bolts the flywheel and the clutch main shaft (6) connects the diaphragm boss the clutch assembly with The pressure plate will compress the clutch the force the diaphragm spring (3) When the engine the clutch assembly , clutch disc and clutch main shaft rotate together When the operator depresses clutch the clutch lever (7) pushes the release bearing hub (5) toward the the release bearing (4) installed the end the release bearing hub pushes the center the diaphragm spring (3) the clutch assembly . a result, the edge the diaphragm separated from the pressure plate (9) which then separated from the clutch disc (2) the clutch disc between the flywheel and pressure plate loses the clutch disc and diaphragm stop but the flywheel and clutch cover continue the rotating force the flywheel not transferred the clutch main resulting the interruption power from the

Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL.NOWAITING

NOTE:

If there is no response to click on the link above, please download the PDF document first and then clickonit.

Clutch - Clutch and components

Clutch and components - Exploded view

Clutch control mechanism - Detailed view

NHIL16CT00312F

(1) Clutch pedal (Mechanical transmission)

(2) Pin

(3) W asher

(4) Cotter pin

(5) Clutch rod assembly

(6) Return spring

(7) Pedal pad (Rubber)

(8) Clutch pedal

(9) Spring pin

Clutch - Clutch and components

Clutch and components - Disassemble the clutch W ARNING

A void injury!

Handle all parts carefully . not place your hands fingers between parts. Use Personal Protective Equipment (PPE) indicated this manual, including protective goggles, gloves, and safety footwear

Failure comply could result death serious injury .

Prior operation: Engine - Remove (10.001)

Install a 380003436 (1) into the center hole the clutch assembly (2)

Remove the six x x mounting bolts (3) from the clutch assembly (2)

Remove the clutch assembly (2)

NOTICE: During assembly torque these bolts29.4 N·m (0.0 )

Remove the clutch cover (1) and the clutch disc (2)

NOTICE: Replace the clutch disc assembly with a new one

• Engine side (1)

• T ransmission side (2)

• Clutch (3)

NOTICE: Make sure that the boss the clutch disc with the short end facing the engine assembly