Engine - Engine and crankcase

39. Install the engine cover (1) . T orque the bolts 23 N·m ( - )

RAIL13SSL0128AA

40. Carefully install the engine hood (1) . T orque the nuts (2) - 6 N·m ( - )

Install the engine hood

Connect the A / C lines (if

Connect all the lights and reattach the harness the

Install the rear trim panels (1) Apply L OCTITE ® 243™ the bolts (2) . T orque the bolts (2) 1 - 1 N·m ( - )

RAIL13SSL0149AA

Next operation:

Charge the A / C system (if See Air conditioning - Charging

Next operation:

Fill the engine oil pan with oil.

Next operation:

Fill the radiator with

Next operation: Connect the battery See Battery - Connect (55.302)

RAIL13SSL0148AA

Radiator - Drain fluid

Remove the radiator cap (1)

Drain the engine coolant system loosening the drain valve (1) , and drain the coolant into a suitable tainer When the radiator empty , tighten the drain valve

NOTE: Rear access door removed for picture clarity

Radiator - Remove W ARNING

Burn hazard! very careful avoid contact with hot fluids. fluid extremely hot, allow cool a moderately warm temperature before proceeding. Failure comply could result death serious injury W0362A

Prior operation:

Drain the coolant See Radiator - Drain fluid (10.400)

Prior operation: Remove the air cooler

Disconnect the upper radiator hose (1) RAPH12SSL0065AA

Disconnect the lower radiator hose (1) .

NOTE: Rear access door removed for picture clarity RAPH12SSL0083AA

Remove the ° overflow hose elbow (1) .

NOTE: Engine hood removed for picture clarity

Remove the radiator hold - down bolts (3) , and remove the radiator (2) RAPH12SSL0066AA

Radiator - Install

Place the radiator (2) above the hydraulic oil cooler stall the radiator hold - down bolts (3) . T ighten the bolts a torque - N·m ( - )

NOTE: Engine hood and rear access door removed for picture clarity

Apply L OCTITE ® 567™ PST P IPE S EALANT the treads the ° overflow hose elbow (1) and install the elbow into the side the radiator T ighten the ° overflow hose elbow (1) two three turns past finger

NOTE: ° overflow hose elbow (1) positioned with the spout facing RAPH12SSL0066AA

Connect the lower radiator hose (1) T ighten the clamp a torque 3 - 4 N·m ( - ) RAPH12SSL0083AA

Connect the upper radiator hose (1) T ighten the clamp a torque 3 - 4 ( - ) . RAPH12SSL0065AA