1 minute read
Engine - Engine and crankcase
Disconnect and remove the lines from the cab air ditioning and heating (if any) (1) and (2)
Advertisement
Place a suitable container under the drain plug (1) for the gearbox - transmission Loosen the Drain the oil.
Detach the supply and return pipes for the transmission cooling oil the connection point (1) Release the pipes from their anchorage the engine
Raise the rear the tractor with a hydraulic Place a mechanical jack stand under the reduction gear case. Use a pneumatic gun remove the retaining nuts the left - hand rear Then remove the
10. Remove the front, central, and rear retaining bolts the guard the front - wheel drive control Then remove the guard (1)
1 Remove the snap ring (2) and move the front sleeve (1) the direction indicated the arrow order release from the groove the front
Remove the bolts that secure the central support (1) the drive shaft. Remove the shaft complete with the Also remove the shim that adjusts the clearance the shaft the
Loosen the Detach the suction tube (1) the oil filter from the transmission (2)
14. For machines with a hydraulic lift and mid mount disconnect the oil supply tube the distributor the lift and the mid mount valves (1) , any , the connection point (3) Remove the transmission oil filter (2)
MOIL13TR02888AB
Disconnect all the electrical connections that prevent the detachment the engine from the box - transmission case, such main connections (1) , main cab connection and power (2) , engine control unit connections (3) , fuse compartment (4) , and extensions according the tractor MOIL13TR02889AB
Loosen the retaining bolts (1) Remove the top tor guard (2) Remove all the remaining free wire
MOIL13TR02942AA
Loosen the strap the inlet the tubing (1) that supplies water the radiator . Disconnect the tube. Drain and recharge the engine
Loosen the retain Disconnect the tube (2) that returns the coolant the engine. MOIL13TR02877AB
Engine - Engine and crankcase
19. Loosen the strap. Disconnect the tube (1) that goes from the air cleaner the
Then remove the hood support (2) removing the two bolts (3)
MOIL13TR02890AB
Loosen the strap (1) Disconnect the tube (2) that connects the air cleaner the injection
Disconnect the hydraulic steering lines (1) Release the lines from the front axle
MOIL13TR02891AB
MOIL13TR02881AB
Hook the rear the engine a hoist using chains ropes for lifting and Position a fixed jack stand (2) under the clutch case (1) near the engine attachment Apply the hand brake. WLAPL4S10C129A