Engine - Engine and crankcase

Remove any supports positioned under the support bracket (1) the front Use a suitable tool fit the transmission the

Apply suitable sealing paste the coupling face (1) the transmission clutch bell.

15. Using a suitable tool, move the engine closer the

16. T ighten the four fastening screws (1) the left - hand side the clutch bell and tighten the prescribed

Repeat for the four fastening screws the right - hand side the clutch bell (1)

T ighten the four retaining nuts (1) the lower side the clutch bell and tighten the prescribed

19. Carefully clean all the parts contaminated any ing paste

Unclamp the chains the eyebolts and free the en-

21. Remove the two eyebolts used lift the engine.

22. Remove any supports positioned under the clutch bell the transmission

Remove any supports positioned under the sion

24. Retrieve and carefully clean the bracket (1) .

25. Correctly position the cable (2) .

Correctly position the bracket (1) its housing the

T ighten the two screws (3) which fix the bracket (1) place.

Carefully clean the area around the sleeve (1) the oil delivery pipe (2)

29. T ighten the sleeve (1) the oil delivery pipe (2) .

30. Retrieve the collar (3) and position correctly its

T ighten the fastening screw (4) the collar (2)

Carefully clean the area around the connector (1) the steering sensor

Correctly position the connector cable (1) the ing sensor

Connect the steering sensor connector (1)

35. Carefully clean the area around the connector (1) the hydraulic fluid pressure sensor

Correctly position the connector cable (1) the hydraulic fluid pressure sensor .

37. Connect the connector (1) the hydraulic fluid sure sensor

MOIL16TR01460AA

Carefully clean the area around the connector (1)

Fasten the connector (1) the support bracket (2)

Connect the connector (1)

41. Carefully clean the area around the sleeve (1) the intermediate delivery pipe connected the sion oil filter

Connect the sleeve (1) the intermediate delivery pipe connected the transmission oil filter

T ighten the two screw collars (2) the sleeve (1) the intermediate delivery pipe connected the mission oil filter

T ighten the screw collar (3) fixing the sleeve (1) the intermediate delivery pipe connected the sion oil filter .

Carefully clean the area around the coupling (1) the intermediate delivery pipe connected the sion oil filter

Correctly connect the coupling (1) the intermediate delivery pipe connected the transmission oil filter

T ighten the coupling (1) the intermediate delivery pipe connected the transmission oil filter

MOIL16TR01458AA

MOIL16TR01457AA

MOIL16TR01456AA

48. Carefully clean the area around the coupling (1) the intermediate dif ferential oil delivery pipe the left - hand side the

49. Correctly connect the coupling (1) the intermediate dif ferential oil delivery pipe the left - hand side the

T ighten the coupling (1) the intermediate dif ferential oil delivery pipe the left - hand side the MOIL16TR01455AA

Carefully clean the area around the couplings (1) the intermediate delivery and return pipes the transmission oil exchanger

Correctly connect (1) the intermediate delivery and turn pipes the transmission oil exchanger

53. T ighten the couplings (1) the intermediate delivery and return pipes the transmission oil exchanger MOIL16TR01454AA

54. Use a suitable hydraulic lift and position under the oil sump the MOIL16TR01451AA

Use a second suitable hydraulic lift and position under the swinging arm (1) MOIL16TR01452AA