2 minute read

SERVICE MANUAL

Tractor

PIN ZCF200001 and above

Advertisement

PIN ZDF200001 and above

Part number 47488219

English March 2013 service brakes pump displacement pump control valves

Auxiliary hydraulic pump and lines and towing hitches Frames and ballasting and hitch assembly

T

Introduction

Safety rules

Personal safety

This the safety alert symbol. used alert you potential personal injury hazards. Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual you will find the signal words W and CAUTION followed special structions. These precautions are intended for the personal safety you and those working with you.

Read and understand all the safety messages this manual before you operate service the

DANGER indicates a hazardous situation that, not avoided, will result death serious injury .

W ARNING indicates a hazardous situation not could result death serious injury

CAUTION indicates a hazardous situation not could result minor moderate injury

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation not could result machine property

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property The word Notice used address practices not related personal safety

Information

NOTE: Note indicates additional information that clarifies other information this

Throughout this manual you will find the word Note followed additional information about a other information the The word Note not intended address personal safety property

Remove - 13L single turbo tractors

Install - 13L single turbo tractors

Remove 13L T Stage turbocharger tractors

Install 13L T Stage turbocharger tractors

Engine - Engine and crankcase

Engine - Remove - 9 Liter tractors

Air conditioning - Evacuate - Air conditioning system

Prior operation: Hood - Remove - Hood support frame row crop unit (90.100)

Disconnect air conditioning high and low pressure hoses (1) from compressor Unplug high pressure sending unit (2)

NOTE: Cap and plug disconnected hoses and

Cut ties (1) and unplug harness (2)

Loosen fan from

NOTE: Hub has left hand

With the help assistant turn fan f hub. move out the right hand

Label and disconnect heater hoses (1) and DEF / AdBlue® solenoid hoses (2) .

Disconnect starter connections (1) Remove ground strap from engine block (2)

Engine - Engine and crankcase

Remove left hand air air tube (1) and lower radiator hose (2) Loosen upper radiator hose clamp (3)

Disconnect alternator cable (1) Disconnect fuel line (2)

NOTE: Plug and cap disconnected fuel line and

Secure cooling package with support strap (1) move right hand air air tube (2) and upper radiator hose (3) .

10. Disconnect fuel return line.

NOTE: Plug and cap disconnected hoses and RCPH10FWD017BBC

1 Disconnect drive shaft from RCPH10FWD018BBC

Remove bracket both sides over rear engine mounts.

RCPH10FWD019BBC

Engine - Engine and crankcase

13. Remove front engine mount bracket. RCPH10FWD021BBC

Attach 4130 load rotor lifting bale move engine from tractor over left hand side RCPH10FWD022BBC

47488219 26/02/2013

This article is from: