SERVICE MANUAL
Part number 47924553
1st edition English October 2015
© 2015 CNH Industrial America LLC. All Rights Reserved.
T9.435 / T9.480 / T9.530 / T9.565
T9.600 / T9.645 / T9.700
Tractor PIN ZFF403001 and above
SER VICE MANUAL
Heavy
model
- ] , T9.480 Heavy
wheeled model
- ] , T9.530 Heavy duty wheeled model [ZFF403001 - ] , T9.530 Wheeled scraper model [ZFF403001 - ] , T9.565 Heavy duty wheeled model
- ] , T9.600 Heavy duty wheeled model [ZFF403001 - ] , T9.600 Wheeled scraper model [ZFF403001 - ] , T9.645 Heavy duty wheeled [ZFF403001 - ] , T9.645 Standard wheeled model [ZFF403001 - ] , T9.645 Wheeled scraper model [ZFF403001 - ] , T9.700 Heavy duty wheeled model [ZFF403001 - ] 47924553 29/09/2015
T9.435
duty wheeled
[ZFF403001
duty
[ZFF403001
[ZFF403001
T9.530
Link Product / Engine
T9.645
Product Market Product Engine Heavy duty wheeled model [ZFF403001 - ] Europe F2CFE614A*B
Heavy duty wheeled model [ZFF403001
Europe F3HFE613G*B001
T9.480
- ]
Heavy
wheeled model [ZFF403001 -
Europe F3HFE613B*B001 Wheeled scraper model [ZFF403001 -
Europe F3HFE613B*B001
Heavy duty wheeled model [ZFF403001 - ] Europe F3HFE613B*B001 Heavy duty wheeled model [ZFF403001 - ] Europe F3DFE613J*B001 Wheeled scraper model [ZFF403001 - ] Europe F3DFE613J*B001
Standard wheeled model [ZFF403001 -
Europe F3DFE613G*B001 Heavy duty wheeled [ZFF403001
Europe F3DFE613G*B001
duty
]
]
T9.565
T9.645
]
- ]
Wheeled scraper model [ZFF403001
Europe F3DFE613G*B001
Heavy duty wheeled model [ZFF403001
Europe F3DFE613F*B001 47924553 29/09/2015
- ]
T9.700
- ]
Front bevel gear set and dif ferential
Powered rear axle
Rear bevel gear set and dif ferential
[27.120] Planetary and final drives . . .
Rear control 10] rear Power T f (PT
Contents INTRODUCTION Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [10.001] Engine and crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 [10.216] Fuel tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 [10.202] Air cleaners and lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 [10.310] Aftercooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4 Engine cooling system Fan and drive Selective Catalytic
exhaust treatment Power coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [19.1 10] Flywheel damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.1 T ransmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [21.1 13] Powershift transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.1 [21.135] Powershift transmission external controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2 [21.155] Powershift transmission internal components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.3 Front axle system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reduction (SCR)
Powered front axle
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Final drives Rear axle system
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.3
T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
Power
ake-Of f (PT
47924553 29/09/2015
Pump control valves
Charge pump
displacement pump
Remote control valves
Auxiliary hydraulic pump and lines
Reservoir , cooler , and filters
Combination pump units
High flow hydraulics
Gearbox Brakes and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [33.1 10] Parking brake parking lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.1 [33.202] Hydraulic service brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.2 Hydraulic systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic systems
V
ariable
Hitches,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [37.100] Drawbars and towing hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.1 Frames and ballasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame 10] Drawbar and hitch assembly Steering [41.101] Steering control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.1 [41.200] Hydraulic control components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2 [41.206] Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.3 Cab climate control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V entilation Air conditioning Cab pressurizing system 47924553 29/09/2015
drawbars, and implement couplings
systems Electrical system Harnesses and connectors Alternator Battery Fuel injection system Engine intake and exhaust system T ransmission control system Front axle control system Rear axle control system Rear Power T f (PT control system [55.050] Heating, V entilation, and Air-Conditioning (HV AC) control system . . . . . . . . . . . . . . . 55.1 1 [55.051] Cab Heating, V entilation, and Air-Conditioning (HV AC) controls . . . . . . . . . . . . . . . . . 55.12 [55.404] External lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.13 [55.522] Cab Power T f (PT controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.14 Electronic modules [55.035] Remote control valve electric control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.16 [55.130] Rear three-point hitch electronic control system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.17 [55.988] Selective Catalytic Reduction (SCR) electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . 55.18 F AUL T CODES Platform, cab, bodywork, and decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Engine hood and panels Engine hood and trims operator seat Cab Cab interior 47924553 29/09/2015
Electrical
INTRODUCTION 47924553 29/09/2015 1
Contents INTRODUCTION Foreword - Important notice regarding equipment servicing (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety rules (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety rules - Ecology and the environment (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 T orque - Minimum tightening torques for normal assembly (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 T orque - Standard torque data for hydraulics (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Basic instructions - Shop and assembly (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Hydraulic contamination (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Capacities (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (*) See content for specific models 47924553 29/09/2015 2
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed this manual must carried out only qualified dealership strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall responsible for any subsequent damages.
The manufacturer and all the organizations its distribution including - without limitationlocal reject any responsibility for damages caused parts and / components not approved the facturer , including those used for the servicing repair the product manufactured marketed the manufacturer any warranty given attributed the product manufactured marketed the manufacturer case damages caused parts and / components not approved the manufacturer .
The manufacturer reserves the right make improvements design and changes specifications any time without notice and without incurring any obligation install them units previously sold. Specifications, descriptions, and illustrative material herein are accurate known time publication but are subject change without case questions, refer your NEW HOLLAND Sales and Service Networks.
INTRODUCTION
47924553 29/09/2015 3
Safety rules
Personal safety
This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury .
Throughout this manual you will find the signal words W and CAUTION followed special These precautions are intended for the personal safety you and those working with
Read and understand all the safety messages this manual before you operate service the
DANGER indicates a hazardous situation not will result death serious injury
W ARNING indicates a hazardous situation not could result death serious injury
CAUTION indicates a hazardous situation not could result minor moderate injury
F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .
Machine safety
NOTICE: Notice indicates a situation not could result machine property
Throughout this manual you will find the signal word Notice followed special instructions prevent machine property The word Notice used address practices not related personal safety
Information
NOTE: Note indicates additional information that clarifies steps, procedures, other information this manual.
Throughout this manual you will find the word Note followed additional information about a other information the manual. The word Note not intended address personal safety property damage.
INTRODUCTION
47924553 29/09/2015 4
Safety rules - Ecology and the environment
air , and water quality important for all industries and life When legislation does not yet rule the treatment some the substances that advanced technology sound judgment should govern the use and disposal products a chemical and petrochemical
Familiarize yourself with the relative legislation applicable your country , and make sure that you understand this Where legislation obtain information from suppliers anticleaning with regard the fect these substances man and nature and how safely and dispose these
Helpful hints
• A void the use cans other inappropriate pressurized fuel delivery systems fill tanks. Such delivery systems may cause considerable
• avoid skin contact with all Most these products contain substances that may harmful your
• Modern oils contain not burn contaminated fuels and waste oils ordinary heating
• A void spillage when you drain fluids such used engine coolant engine hydraulic brake not mix drained brake fluids fuels with Store all drained fluids safely until you can dispose the fluids a proper way that complies with all local legislation and available
• not allow coolant mixtures get into the Collect and dispose coolant mixtures properly
• The air - conditioning system contains gases that should not released into the Consult airtioning specialist use a special extractor recharge the system properly
• Repair any leaks defects the engine cooling system hydraulic system immediately
• not increase the pressure a pressurized circuit this may lead a component
• Protect hoses during Penetrating weld splatter may burn a hole weaken allowing the loss coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful fect the environment the batteries are not properly recycled after Improper disposal batteries can contaminate the groundwater , and NEW HOLLAND strongly recommends that you return all used batteries a NEW HOLLAND dealer , who will dispose the used batteries recycle the used batteries properly . some this a legal
Mandatory battery recycling
NOTE: The following requirements are mandatory Brazil.
Batteries are made lead plates and a sulfuric acid Because batteries contain heavy metals such CONAMA Resolution 401 / 2008 requires you return all used batteries the battery dealer when you replace any not dispose batteries your household
Points sale are obliged to:
• Accept the return your used batteries
• Store the returned batteries a suitable location
• Send the returned batteries the battery manufacturer for recycling
INTRODUCTION
47924553 29/09/2015 5
SER VICE MANUAL
T9.435 Heavy duty wheeled model [ZFF403001 - ] , T9.480 Heavy duty wheeled model [ZFF403001 - ] , T9.530 Heavy duty wheeled model [ZFF403001 - ] , T9.530 Wheeled scraper model [ZFF403001 - ] , T9.565 Heavy duty wheeled model [ZFF403001 - ] , T9.600 Heavy duty wheeled model [ZFF403001 - ] , T9.600 Wheeled scraper model [ZFF403001 - ] , T9.645 Heavy duty wheeled [ZFF403001 - ] , T9.645 Standard wheeled model [ZFF403001 - ] , T9.645 Wheeled scraper model [ZFF403001 - ] , T9.700 Heavy duty wheeled model
- ] 47924553 29/09/2015
Engine
[ZFF403001
Contents Engine[10.001] Engine and crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 Fuel tanks Air cleaners and lines [10.310] Aftercooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4 Engine cooling system Fan and drive [10.500] Selective Catalytic Reduction (SCR) exhaust treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7 47924553 29/09/2015
EngineEngine and crankcase - 001 T9.435 Heavy duty wheeled model [ZFF403001 - ] , T9.480 Heavy duty wheeled model [ZFF403001 - ] , T9.530 Heavy duty wheeled model [ZFF403001 - ] , T9.530 Wheeled scraper model [ZFF403001 - ] , T9.565 Heavy duty wheeled model [ZFF403001 - ] , T9.600 Heavy duty wheeled model [ZFF403001 - ] , T9.600 Wheeled scraper model [ZFF403001 - ] , T9.645 Heavy duty wheeled [ZFF403001 - ] , T9.645 Standard wheeled model [ZFF403001 - ] , T9.645 Wheeled scraper model [ZFF403001 - ] , T9.700 Heavy duty wheeled model [ZFF403001 - ] 47924553 29/09/2015 10.1 [10.001] / 1
Install
Remove - 13L single turbo (*)
Install - 13L single turbo (*)
Remove - 13L dual stage turbo (*)
Install - 13L dual stage turbo (*)
Service instruction - 13L single turbo valve cover access (*)
Service instruction - 13L dual stage turbo, valve cover access (*)
Contents EngineEngine and crankcase - 001 SER VICE Engine Change fluid - Changing engine oil and filter (*) 3 Remove(*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
(*)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (*) See content for specific models 47924553 29/09/2015 10.1 [10.001] / 2
Engine - Engine and crankcase
Engine - Change fluid - Changing engine oil and filter
NOTE: Reduce 300 hours less NEW HOLLAND AMBRA UNITEK MASTERGOLD SBL - 4 not Change the engine oil and filter every 600 hours once a year before whichever occurs Y our dealer has approved oil and filters. not use other types oil
NOTE: For best results change the oil and filter while the engine still warm the touch from operation (not hot). The tractor must a level Remove the engine side shields. engine
Remove the oil pan drain plug and drain the oil from the engine into a container
After all oil has install new washer 98474302 drain center washer plug and install drain T orque drain plug N·m ( )
Clean the area around the filter head and housing the left side the Place a container under the oil filter and turn the filter housing counterclockwise loosen with a ( 2 ) After all oil has drained from the filter , remove the housing with filter
Install the new filter cartridge and O - Lightly oil new Oring.
Reinstall the filter assembly onto the tractor . not over tighten O - ring will
RAIL13TR04406AA 1
RCPH10FWD928BAM 2 47924553 29/09/2015 10.1 [10.001] / 3
Fill with new oil into the engine oil fill (1) .
NOTE: T otal oil refill capacity will determined how completely the crankcase not fill above the high mark the dipstick (2) when refilling.
Operate the engine for five minutes 1000 RPM . Check for oil leaks the filter base and drain
Stop the W ait approximately five minutes for the oil return the oil pan. Check the oil level the dipstick (2) and add oil
13L engines
Remove the oil pan drain plug and drain the oil from the engine into a container
After all oil has install new washer 98474302 drain plug, center washer plug and install drain T orque drain plug N·m ( )
Place a container under the oil filter the left side the Use a ( 0.75 ) socket open drain bottom This will allow oil drain from the After oil turn the filter housing counterclockwise loosen with a ( 2 ) wrench and remove the filter
Install the new filter cartridge and O -
Reinstall the filter assembly not over tighten the O - ring will leak.
Engine - Engine and crankcase
RAIL13TR04406AA 3
RAIL14TR00085AA 4
47924553 29/09/2015 10.1 [10.001] / 4
RCPH10FWD928BAM 5
Fill with new oil into the engine oil fill (1) .
NOTE: T otal oil refill capacity will determined how completely the crankcase not fill above the high mark the dipstick (2) when refilling.
Operate the engine for five minutes 1000 RPM . Check for oil leaks the filter base and drain
Stop the W ait approximately five minutes for the oil return the oil pan. Check the oil level the dipstick (2) and add oil
Engine - Engine and crankcase
RAIL13TR01857AA 6 47924553 29/09/2015 10.1 [10.001] / 5
Engine - Engine and crankcase
Engine - Remove -
Prior operation: Hood support - Remove – Row crop frame, engine (90.102)
Disconnect the driveshaft from the engine.
Label and disconnect the heater hoses from the
NOTE: Plug and cap all disconnected hoses and
Label and disconnect the two hoses for the diesel sions fluid tank
1
RAIL13TR02967AA
2
RAIL13TR02966AA
3 47924553 29/09/2015 10.1 [10.001] / 6
RAIL13TR02969AA
Engine - Engine and crankcase
Loosen the hose clamp (1) the turbo.
Remove the air intake tube (2) from the
Disconnect the power cable (1) from the starter
Disconnect the wire (2) from the starter
Remove the bolt (3) and disconnect the ground strap from the engine
Remove the left hand charged air cooler
NOTE: Plug and cap disconnected tubes and
RAIL13TR03051AA 4
RAIL13TR02970AA 5
6 47924553 29/09/2015 10.1 [10.001] / 7
RAIL13TR02978AA
Disconnect the lower radiator hose the
Remove the right hand charged air cooler
Engine - Engine and crankcase
7 1
8
9 47924553
10.1 [10.001] / 8
RAIL13TR02971AA
Attach a support strap the cooling package frame and the chassis frame shown support the cooling
RAIL13TR02973AA
RAIL13TR02972AA
29/09/2015
13. Remove the clamp (1) securing the upper radiator tube the bracket the Remove the upper radiator tube (2)
Cut the ties securing the harness and disconnect the harness.
Loosen the viscous drive from the
NOTE: The fan pulley hub left handed
Engine - Engine and crankcase
RAIL13TR02974AA
1 1
RAIL13TR02976AA
47924553 29/09/2015 10.1 [10.001] / 9
RAIL13TR02979AA
17. With the help assistant remove the fan out the right hand side the
Disconnect the harness lead the air conditioner high pressure switch (1) and the clutch activation lead (2)
Use a breaker bar relieve the tension the tine belt and remove the belt from the air conditioner compressor pulley .
Engine - Engine and crankcase
RAIL13TR02977AA
RAIL13TR02981AA
47924553 29/09/2015 10.1 [10.001] /
RAIL13TR02987AA
20. Support the compressor and remove the four ing
RAIL13TR02986AA
Set the compressor the right hand front tire and secure with holding straps shown.
RAIL13TR02982AA
Disconnect the power cable (1) from the alternator
Disconnect the exciter wire (2) from the alternator
RAIL13TR02983AA
Engine - Engine and crankcase
47924553 29/09/2015 10.1 [10.001] / 1 1
Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL.NOWAITING
NOTE:
If there is no response to click on the link above, please download the PDF document first and then clickonit.
24. Disconnect the harness (1) .
Remove the bolt (2) securing the harness the gine
RAIL13TR02985AA
Unplug the connector (1)
Disconnect the main harness (2) from the engine troller .
Disconnect the cable (3) from the junction
Cut the tie (4) securing the harness and cable gether
Move the harness (5) out from behind the junction box and the engine stay with the chassis during the engine
RAIL13TR02988AA
Remove the nut and bolt (1) securing the cable the
Remove the bolts (2) securing the bracket the gine block.
RAIL13TR02984AA
Engine - Engine and crankcase
47924553 29/09/2015 10.1 [10.001] /
33. Remove the bolt (1) securing the harness the gine
Disconnect the fuel inlet hose (2)
NOTE: Plug and cap all disconnected fuel hoses and tings.
RAIL13TR02993AA
Disconnect the fuel return
RAIL13TR02991AA
Remove the right and left hand hold down
NOTE: Left hand side Remove both
RAIL13TR02989AA
Engine - Engine and crankcase
47924553 29/09/2015 10.1 [10.001] /
37. Remove the front hold down bracket.
Attach the 4130 load rotor lifting bale equivalent overhead crane and engine lift brackets.
NOTE: The engine lifting brackets are for vertical lifting only Any lifting device that not vertically line with the lifting brackets can damage the engine rocker arm cover cause bracket
Remove the
Engine - Engine and crankcase
RAIL13TR02994AA
RAIL13TR02992AA
47924553 29/09/2015 10.1 [10.001] /
RAIL13TR02990AA
Engine - Engine and crankcase
Engine - Install -
Set the engine place the chassis.
NOTE: The engine lifting brackets are for vertical lifting only Any lifting device that not vertically line with the lifting brackets can damage the engine rocker arm cover cause bracket RAIL13TR02990AA 1
Remove the 4130 load rotor lifting bale equivalent from the engine lift brackets. RAIL13TR02992AA 2
Install the front hold down bracket.
T orque the lower engine mount frame bolts (1) - 107 N·m ( - )
T orque the ISO mount nut and bolt 160 - 220 N·m ( 1 - 162 ) . RAIL13TR02994AA 3
47924553 29/09/2015 10.1 [10.001] /
Engine - Engine and crankcase
Install the right and left hand hold down brackets.
NOTE: Left hand side Install both T orque the bolts 125 - 150 N·m ( - 1 1 1 )
RAIL13TR02989AA 4
Connect the fuel return
NOTE: Remove the plugs and caps from the disconnected fuel hoses and fittings.
RAIL13TR02991AA 5
Route the harness and secure the engine block with the original bolt (1)
Connect the fuel inlet hose (2)
47924553 29/09/2015 10.1 [10.001] /
RAIL13TR02993AA 6