Engine - Engine and crankcase

Engine - Install W ARNING

A void injury!

Handle all parts carefully . not place your hands fingers between parts. Use Personal Protective Equipment (PPE) indicated this manual, including protective goggles, gloves, and safety footwear

Failure comply could result death serious injury . W0208A

T o - install the engine, proceed follows:

• Mount the support for the radiator cores the engine with the four Remember insert the washers a spacer the two upper

• - fit the hood damper - connect the per radiator

Refit the support with the grid heater relay and supply cable. Connect the alternator with the charge Connect the supply cable the relay the grid heater

• Reinstall:

• Upper radiator sleeve

• Air cleaner / turbocharger sleeve

• Oil filter collection pipe / air cleaner

• Intercooler right - hand sleeve the left - hand side:

• Intercooler left - hand sleeve

• Refit the lift oil filter including the supply pipe the

• Refit the pump including the oil supply the Reconnect the intake pipe the Connect the inlet pipe and the supply pipe the Steering - O - Matic Also fit the tank and the related

For the TK4050 and TK4060 fit the bypass valve assembly and the oil supply pipe the mission.

• Reconnect the supply the heat exchanger pump the bypass valve assembly Reconnect the return the intercooler assembly

• Reconnect the fuel supply pipe the priming Reconnect the exhaust pipe the injection

• Reconnect the radiator lower sleeve and refit the plug.

• Refit the muf fler and related flame

• Refit the right - and left - hand fan guards.

• Refit the right - and left - hand support the safety

• Fill the engine refrigerant with the product and quantity prescribed Consumables

• Carry out the operations for the implement clutch Clutch - Remove (18.1 10) 47830952

Fuel tank - Remove – Rear

Danger

Heavy objects!

Lift and handle all heavy components using lifting equipment with adequate capacity . Always support units parts with suitable slings hooks. Make sure the work area clear all

Failure comply will result death serious injury . D0076A

Proceed follows:

After disconnecting the operator present loosen the retaining bolts and remove the seat (1)

Loosen the retaining bolts and detach the seat ing (1)

NOTE: The rear tank varies from models TK4020 , TK4030 (special) models TK4040 , TK4050 , TK4060 (open There are slight differences capacity and

Whilst detaching the support (1) (Fig. 2 disconnect the P switch connection (1)

Drain the fuel from the front tank.