10 minute read
Protect Your Jobsite with OSHA’s Focus Four Hazards
Ideas to help you underscore your safety efforts
Construction work is a risk. Each year, the industry is rated as one of the most dangerous in America — and for good reason. Your projects are never the same for more than a few days, materials move, people change shifts and deadlines tighten.
These are a few reasons construction fatalities hit a 12-year high back in 2019, according to the Bureau of Labor Statistics. Yet more than half of all fatal injuries were related to just four hazards: falls, electrocutions, being struck by and getting caught in — or between — objects. You may recognize these as the Occupational Safety and Health Administration’s (OSHA) Focus Four Hazards. These hazards are more than a coined term — they’re a tool. As a senior safety consultant, I’ve watched firsthand how these pillars can improve your safety efforts. These strategies and hypothetical scenarios, should provide at least one new idea or reminder to fine-tune your safety efforts. The hypothetical descriptions used below are not based upon any specific individual, entity or set of facts. Fall Hazards
Fall hazards can appear in many forms, and in 2019, they were the leading cause of non-transportation-related fatalities. Any walking or working surface that could cause your workers to lose their balance can qualify as a fall hazard.
The hypothetical scenario: While standing on a loader tire, a technician loses his balance. He falls and strikes his head on the ground 5 feet below, sustaining an injury requiring emergency surgery.
Possible prevention strategies: • Evaluate machinery and other elevated areas technicians may need to access and develop specific procedures to reduce the risk of slips, trips and falls from these areas. • Use a three-point mounting and dismounting technique for heavy equipment. • Add guardrails with the proper height requirements when working above ground. • Require workers to wear fall protection equipment when working higher than 6 feet above the ground. • Train technicians and other employees who may work at elevated positions on proper safety procedures. • Monitor employees and enforce procedures involving heights and property controls. • Provide periodic refresher training on required procedures, machinery and personal protective equipment (PPE). • Seek input from OSHA or the original equipment manufacturer (OEM) regarding best practices to continued on page 59
MATERIALS AVAILABLE FOR PURCHASE:
• 1” MINUS PROCESSED GRAVEL • ¾” & 1½” CRUSHED STONE • SCREENED LOAM • SCREENED SAND
MATERIALS ACCEPTED:
• BROKEN ASPHALT • NON & REINFORCED CONCRETE • CONCRETE WITH WIRE MESH • ROCK • BLASTED LEDGE
NOW AVAILABLE: BOSTON GRAVEL
PLANT LOCATION:
200 LEGACY BLVD. DEDHAM, MA 02026 Plant: 617-590-0024
OFFICE:
1039 EAST STREET DEDHAM, MA 02026 Office: 781-329-4111 Fax: 781-329-1039
HOURS OF OPERATION: MONDAY-FRIDAY: 6:30 A.M. – 4:00 P.M. SATURDAY: 7:00 A.M. – 12:00 P.M.
DELIVERIES AVAILABLE ON LARGE ORDERS. PLEASE CALL FOR PRICING.
Experience and solutions to support you.
A customer service team that knows you.
Serving New England since 2005
Talk to us about how other members are benefiting from our service!
• FMCSA Compliance • Driver Safety 855-238-2381 AdvantageDrugTesting.com
Protect Your Jobsite continued from page 57 safely access hard-to-reach areas of machinery. • Maintain a clutter-free jobsite. Struck-By Hazards
Struck-by hazards are the second most common cause of worker fatalities. You can identify these risks as any flying, falling, swinging or rolling object that could cause forcible contact with a person on your jobsite.
The hypothetical scenario: A subcontractor is working on the third floor and bumps a piece of pipe. The pipe rolls off a ledge and ends up striking a worker on the ground level. The affected worker suffers severe blunt force trauma to their head.
Possible prevention strategies: • Incorporate toe boards, netting, or guardrails if people are working at different heights. • Implement pre-task-planning to reduce the likelihood of overlapping work that could cause injuries across or below from where the task is taking place. • Place warning signs throughout the jobsite to communicate where work is taking place at different heights. • Provide and require hard hats, glasses, high-visibility vests and PPE specific to each task. • Remind employees to stay outside the swing radius of heavy equipment and receive acknowledgment from the operator before they approach. • Only allow trained flaggers to direct traffic. • Secure tools and materials when working overhead. Electrocution Hazards
Like the risks listed prior, electrocution hazards present themselves in a variety of situations. Any situation that could expose someone to a lethal amount of electrical energy is an electrocution hazard.
You may recognize these risks in the form of work that takes place around powerlines or temporary power sources. If you work in a location where wet conditions may impact your project, your team
Boston Area Locations 2 Dexter Street Bo Eve st re on tt, Area MA 02149 Boston Area Locat431 Sec ionsond Street Locations 2 Dexte Everett r , Street MA 021 2 49 Dexter Street Everett, MA 021 Eve49 rett, MA 02149 431 Second Stre 43et 1 Second Street Everett, MA 021 Eve49 rett, MA 02149
BOSTON AREA LOCATIONS 2 Dexter Street Everett, MA 02149
Serves over 2500 customers a week and is one New England's largest buyers, Serves over 2500 customers a week and is one of New England’s largest sellers and processors of scrap metal. For over 60 years our goal has remainedbuyers, sellers, and processors of scrap metal. For over 60 years our goal the same - to provide the best prices in the industry along with top notch has remained the same - to provide the best prices in the industry along with customer service! Call Fred Rogers at 617-595-5505 top notch customer service! Call Fred Rogers at 617-595-5505
Serves over 2500 customers a week and is one New England's largest buyers, sellers and Servesprocessors of over 2500 customers a week and is one New England'sscrap metal. For over 60 years our goal has remained largest buyers, the same - to sellersprovide the and best processors prices in theof scrap industry metal. along For over 60 yearswith top notch our goal has remained customer service! the same - to provide the best pricesCall Fred Rogers at 617-595-5505 in the industry along with top notch customer service! Call Fred Rogers at 617-595-5505
Turn your metal into money today! Minichiello Bros. Inc.,/Scrap-It Inc.
could face an even higher risk of electrocutions. The hypothetical scenario: An employee is using a circular saw to complete a task, which relies on a generator for power. After a brief rainfall, the employee resumes using the saw where a puddle has formed around the electrical cord without a ground fault circuit interrupter in place and an electrical current from the saw’s connection electrocutes the employee. Possible prevention strategies: • Request employees to complete a job hazard analysis before completing work involving electrical equipment. • Set a cadence for evaluating the age and wear of electrical equipment. • Color code extension cords to confirm the date range of the latest inspection. continued on page 61 100 Fremont Street Worcester, MA 01603 431 Second Street Everett, MA 02149
Turn your metal into money today!
Minichiello Bros. Inc./Scrap-It Inc.
NOW OPEN West eld, Massachusetts!
As a new member of UCANE, JDC is committed to being your trusted resource and partner for equipment rental and more.
Trained & Certi ed Service Technicians JDC’s FleetForce™ boasts the largest equipment line-up providing you more options, more capabilities, and more versatility.
With the largest in-stock selection of parts, tools, and accessories, JDC’s PartsForce™ is accessible where and when you need it.
Our technical expertise is second to none. That’s JDC Know-How™
300,000+ OEM Parts In-Stock
DOHENY KNOW-HOW
Bond or Insurance Problems?Bond or Insurance Problems? Bond or Insurance Problems?
Let us improve upon your current program.Let us improve upon your current program.Let us improve upon your current program. We can help!We can help!We can help!
• Problem Obtaining Bonds? • Slow Service? • Uncompetitive Terms?• Problem Obtaining Bonds? • Slow Service? • Uncompetitive Terms?• Problem Obtaining Bonds? • Slow Service? • Uncompetitive Terms? • Bid Bonds • Performance & Payment Bonds • Bid Bonds • Performance & Payment Bonds • Bid Bonds • Performance & Payment Bonds • High Insurance Premiums? • Inadequate Coverage? • Poor Service?• High Insurance Premiums? • Inadequate Coverage? • Poor Service?• High Insurance Premiums? • Inadequate Coverage? • Poor Service? • All Forms of Liability and Property Insurance • All Forms of Liability and Property Insurance • All Forms of Liability and Property Insurance • Newton Johnson, President • Oscar B. Johnson, Executive Vice President• Newton Johnson, President • Oscar B. Johnson, Executive Vice President• Newton Johnson, President • Oscar B. Johnson, Executive Vice President • Mark D. Leskanic, Vice President • Christopher Clark, Account Executive• Mark D. Leskanic, Vice President • Christopher Clark, Account Executive• Mark D. Leskanic, Vice President • Christopher Clark, Account Executive
Eastern States InsuranceEastern States InsuranceEastern States Insurance
Insurance Bonds Employee Benefits Risk ManagementInsurance Bonds Employee Benefits Risk ManagementInsurance Bonds Employee Benefits Risk Management
50 Prospect Street | Waltham, Massachusetts 02453 | (781) 642-9000 | (781) 647-3670 fax | esia.com50 Prospect Street | Waltham, Massachusetts 02453 | (781) 642-9000 | (781) 647-3670 fax | esia.com50 Prospect Street | Waltham, Massachusetts 02453 | (781) 642-9000 | (781) 647-3670 fax | esia.com
Protect Your Jobsite continued from page 59 • Contact utility companies to de-energize and ground power lines before working near power lines. • Use ground fault circuit interrupters when using electrical equipment. • Ensure ground pins are included on all electrical plugs. • Establish a methods of procedure (MOP) requirement where employees list out the steps they’ll take before working with, or near, energized electrical equipment. • Require clothing that covers most surface areas of the body in case of sparks.
Caught-In or -Between Hazards
While caught-in or -between hazards are the last risk mentioned on this list, they require the same dedication as the three discussed above. These hazards are anything that could squeeze, catch, crush, pinch, or compress a person between two or more objects.
The hypothetical scenario: An employee begins work in a 10-foot-deep trench without proper shoring installed. The trench collapses, burying the employee. Trained personnel dig the employee out and the employee survives with severe injuries.
Possible prevention strategies: • Install shoring, sloping, shielding and benching systems based on soil classifications before starting trench work. • Assign a competent person to be present for trench examinations and — if necessary — system implementation. • Place ladders within 25 feet of workers for trenches deeper than 4 feet. • Equip noise and light features that activate when heavy equipment moves forward or backward. • Provide PPE such as hard hats, safety shoes and high-visibility vests. Commit to a Safer Year
Timelines, planning and quality all contribute to an effective project. But every year, the most successful projects finish with the least number of injuries.
Remember, others are here to support your efforts. Consult your local experts, insurer and OSHA guidelines for more help managing the complex risks your team faces. Good luck in the year ahead.
Written by Larry Barone. Reprinted from constructionbusinessowner.com n
New England’s Only 1st Source Elite Marketer of Chevron Quality Lubricants
On & Off-Road Diesel Fuel, Diesel Exhaust Fluid, Propane & Heating Oil Available in Select Markets of Our Service Area. Complete Line of Lubricants For All Industries:
New England’s Premier DEF Manufacturer of Ocean Blue Diesel Exhaust Fluid
Off Highway & Construction On Highway Fleets Automotive Marine Railroad Industrial Plants
Experienced Sales & Customer Service Personnnel Ready To Help You With Your Lubricant Needs.
