SHINKO SEIKI GENERAL CATALOG OF VACUUM PUMPS
DRY VACUUM PUMP SSH / SST SERIES OIL ROTARY VACUUM PUMP SR-B / SRP-B / SR /SGD / SVC SERIES WATER-RING VACUUM PUMP SW-S / SW / SW-C / SW-AS / SW-HM SERIES MECHANICAL BOOSTER PUMP SMB / SMB-D SERIES OIL DIFFUSION PUMP SD SERIES VACUUM EXAUST SYSTEM SMB-DP / SMB-RP / SMB-WP / S UNIT SYSTEM VACUUM GAUGE, VACUUM VALVE, VACUUM PARTS
SHINKO SEIKI
Vacuum Pump Selection Flow Chart Select a suitable vacuum pump among Shinko Seiki’s abundant line-ups. We introduce recommended vacuum pump with overall advantages.
Start Selection
Operation Pressure (PA)
1 ~ 2300
1300 ~ 4000
Condensable gas
Yes
or
Condensable gas
Yes
Condensable gas
No
or
Dust powder
or
Dust powder
Dust powder
No
No
Inflammable gas
Inflammable gas
Inflammable gas
or
or
or
pH-
pH-
pH-
Corrosive gas
Corrosive gas
Corrosive gas
Exhaust Condition
Yes Recommended Pump
2300 ~ Atmospheric Pressure
2 6
No 3 5
Yes
Yes 1 4
2 4 6
No 4 5
2 6
No
Yes
4 6
6
Air ejector is needed. 1
2
3
4
5
6
Type of Pump
SMB-DP Vacuum System
SMB-WP Vacuum System
SMB-RP Vacuum System
Dry Vacuum Pump
Oil Rotary Vacuum Pump
Water-Ring Vacuum Pump
Ultimate Pressure (Pa)
0.13
1.3~330
0.13
0.8
0.67
2300
Operational Pressure (Pa)
1000
13000
1300
Pumping Speed (m3/min)
5 ~ 30
1.5 ~ 70
1.5 ~ 160
A. pressure 1~3
4000 0.15 ~ 15
< A. pressure 0.1 ~ 10
Initial cost
High
Low
Running cost
Low
High
Kind of gas
1
2
3
Condensability Coagulability Powder Inflammability Corrosivity : Excellent
: Special work for resistance is needed.
: Oil replacement is needed.
2
4
5
6
Dry Vacuum Pump • Electronics Industry : Pull-up of Si single crystal, Solar battery, Liquid crystal, Semiconductor, IC, Memory tip manufacturing. • Metallurgical Industry : Vacuum heat treatment, Vacuum sintering, Vacuum carburizing, Vacuum fusion. • Pharmaceuticals, Chemicals, Food : Distillation, Reagency, Refinement, Polymerization, Desiccation, Condensation.
• Plastic Industry : Vacuum forming, Extrusion molding, Drying of resin material. • Physical and Chemical Industry : Entire R&D purpose. • Environment Recycling : Biodiesel, Fuel battery, Recovery of Freon.
Vacuum Pump Seeking Environment Performance
SHINKO SEIKI
ECOLOGY
Under the circumstances that environmental measures for the prevention of global warming have become a significant business challenge, SHINKO SEIKI suggest dry vacuum pumps with high efficiency and high reliability, which eliminates wasted oil or water considering the environmental load as well as the reduce of burden on oil replacement work or maintenance. Owing to a uniquely developed screw rotor, machine structure seeking easy maintenance and selectable accessories, we realize stable performance and lengthening of maintenance cycle in the hard processes including suction of condensable gas, powder and product material, which had been considered unsuitable for dry vacuum pumps. As a standard of the next generation vacuum pumps supporting customer’s production, SHINKO SEIKI - Pioneer of vacuum pump - release to the public.
SSH Series
Energy saving pump mounting a high performance DCBL motor. • Economy Power saving effect for approx. Yen 64,000 per year. • Ecology Reduce CO2 amount of emission of approx 1,400 kg per year. Exhaust Speed L/min (m3/h)
Model
POW
ECO
Motor (DCBL) kW
Lubricant Amount L
Suction Port
Exhaust Port
Cooling Water Amount
Size DxWxH
Weight kg
SSH100
1300 (78)
1030 (61.8)
3.7
1
NW50
NW40
5
1126 x 442 x 537
240
SSH150
2100 (126)
1710 (102.6)
5.5
1.1
NW80
NW40
7
1272 x 462 x 565
310
SSH200
3000 (180)
2500 (150)
7.5
1.1
NW80
NW40
7
1316 x 472 x 628
400
Note :
1. Only 200V class is available for the motor (50Hz/60Hz).
SSH 150
SST Series
Multi purpose pump applicable to wide range of applications owing to various accessories • Keep stable operation even in the hard specific environment. • Realize a simple structure enabling maintenance in the setting place. • Make it possible to recover or reproduce sucked processing gas. Model SST 100 SST 150 SST 200
Exhaust Speed L/min (m3/h) 50Hz
60Hz
970 (58.2)
1220 (73.2)
1610 (96.6) 2350 (141)
1970 (118.2) 2800 (168)
Ultimate Pressure Pa 50Hz
60Hz
Motor Lubricant Suction Exhaust kW Amount Port Port L
Cooling Water Amount
Size DxWxH
Weight kg 200
1.0
0.8
3.7
1
VG50
Rc2
5
995 x 490 x 682
1.0
0.7
5.5
1.1
VG80
Rc2
7
1088 x 494 x 720
240
0.9
0.6
7.5
1.1
VG80
Rc2
7
1138 x 500 x 750
400
High discharging efficiency Hight durability
Our own chamfer screw rotor technology (patent obtained)
Image illustration of mounting accessories e.g.) Pump heater, Drain tank, Control panel, etc.
SST 150
3
Oil-Sealed Rotary Pump • Electronics industry : Lamp, Exhaust of display tube, Semiconductor, IC, Production of memory tips. • Electric industry : Condenser, Transformer, Cable, Drying of motor, Impregnation. • Food industry : Vacuum packing, Condensation, Freezing dry.
• Plastic industry : Vacuum forming, Extruding, Drying of resin material. • Heat treatment : Vacuum sintering, Vacuum fusion. • Metal machine industry : Electron beam welding, Vacuum brazing.
SR-B • SRP-B Series
SR Series
Large exhaust volume but compact vacuum pump. Have excellent durability.
Single stage vacuum pump with the most simple structure.
SR-37B II Model
Designated Exhaust Speed L/min (m3/h)
SR-800
Ultimate Min Pressure (Pa) Motor Oil Suction Exhaust Cooling Port Port kW Amount Water Gas Ballast L Dia. Dia. L/min Close Open
Size DxWxH (mm)
Weight kg
Model
Ultimate Min Designated Pressure (Pa) Motor Oil Suction Exhaust Cooling Exhaust Port Port Speed L/min Gas Ballast kW Amount Water L Dia. Dia. 3 (m /h) L/min Close Open
SR-1500B
1540 (92.4)
0.67
67
2.2
4
VG50 PS1/2 Air cooled
820 x 550 x 750
190
SR-500
550 (33)
0.67
133
0.75
2.5
SR-20B II
2024 (122.4)
0.67
67
3.7
5
VG80
PS2
5
677 x 552 x 870
260
SR-800
803 (48.2)
0.67
67
1.5
3
SR-25B II
2520 (151.2)
0.67
67
3.7
5
VG80
PS2
5
677 x 552 x 870
260
SR-30B II
3040 (182.4)
0.67
67
3.7
11
VG80
PS2
5
775 x 590 x 910
400
SR-37B II
3740 (224.4)
0.67
67
5.5
11
VG80
PS2
5
775 x 590 x 910
400
SR-60B II
6180 (370.8)
0.67
67
7.5
20
VG100 80A
5
910 x 720 x 1120
725
SR-75B II
7660 (459.6)
0.67
67
11
20
VG100 80A
5
910 x 720 x 1120
725
SRP-15000B
15300 (918)
0.53
53
22
54
VG150 120A
10
1210 x 1230 x 1680
1560
Note :
1. The weight does not include motor.
VG40
PS1
Size DxWxH (mm)
Weight kg
Air cooled
660 x 380 x 560
74
VG50 PS1/2 Air cooled
730 x 400 x 600
105
2. VF-VG is a flange for JIS B 2290 vacuum system.
Note : 1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. JIS 10K Flange
SGD Series
SVC Series
Compact and high performance Direct-drive vacuum pump.
Two-stage rotary vane type. Excellent ultimate pressure and low vibration.
SGD-600 Model
Designated Exhaust Speed L/min (m3/h) 50Hz
60Hz
SVC-150
Ultimate Pressure Oil Suction Exhaust Motor Amount Port (Pa) Port Gas Ballast kW L Dia. Dia. Close Open
SGD-400 378 (22.7) 454 (27.2) 0.01 1.33 0.75 SGD-600 580 (34.8) 700 (42) 0.01 1.33
1.5
1.5 3
VG40 VG40
PT1
Min. Cooling Water L/min
Size DxWxH (mm)
Weight kg
Air Cooled 238 x 603 x 340
PT1
Air Cooled 304 x 709 x 386
46 52
SGD-900 790 (47.4) 950 (57) 0.01 1.33
1.5
3.5
VG50 PT1 1/2 Air Cooled 304 x 767 x 386
62
SGD-1300 1130 (67.8) 1360 (81.6) 0.01 1.33
2.2
5
VG50 PS1 1/2 Air Cooled 304 x 874 x 386
72
Note :
Model
Ultimate Designated Min Pressure (Pa) Motor Oil Suction Exhaust Cooling Exhaust Port Speed L/min Gas Ballast kW Amount Port Water L Dia. (m3/h) L/min Close Open
Size DxWxH (mm)
Weight kg
SVC-150
158 (9.5)
0.067
1.3
0.4
1.8
Ø 34
PF1
Air cooled
500 x 300 x 370
39
SVC-300
315 (18.9)
0.067
1.3
0.75
2.1
Ø 34
PF1
Air cooled
500 x 300 x 370
43
Note : 1. The weight does not include motor. Outer diameter of hose
2. VF-VG is a flange for JIS B 2290 vacuum system.
1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system.
TP-03/TP-05
By mounting a oil mist trap above the exhaust port of oil-rotary vacuum pump, oil drops and oil mist, produced right after pump operation or during high pressure operation, can be trapped, which creates comfortable working environment. Noise during operation is also reduced.
A D
B
C
Oil Mist Trap
HT-500-HT-3700
A
B
C
A D
HT-75 II/HT-15000 B
C
4
Model
Applicable Pump
TP-03 TP-05 HT-500
Size
Weight kg
SVC-150,300
A (mm) 100
B (mm) 112
C 25A nipple
D -
-
100
136
25A nipple
-
0.7
SR-500
155
252
25A nipple
-
1.8
0.6
HT-800
SR-800
155
300
40A socket
25A socket
2
HT-1500
SR-1500B
290
350
40A socket
40A socket
10
HT-2500
SR-25B II
300
390
50A socket
50A socket
12
HT-3700
SR-37B II
370
411
50A socket
50A socket
18
HT-75 II
SR-75B II
415
811.5
JIS10K-80A
JIS10K-100A
45
HT-15000
SRP-15000B
415
1052
JIS10K-100A
JIS10K-100A
68
Water-Ring Vacuum Pump • Electronics industry : Adsorption of water, Transportation, Vacuum tweezers. • Chemical industry : Recovery of solvent, Alcohol, Fat and oil, Fragrance, Distillation of resin material. • Pharmaceutical industry : Cleansing of medical instruments, Sterilization, Blood, Microorganism, Freezing dry of medical goods.
• Food industry : Vacuum Packaging, Vacuum transportation of powder, condensation, Vacuum cooling. • Textile industry : Steam setting of thread, Dehydration of pulp, Drying of wood. • Plastic industry : Vacuum forming, Extruding, Drying of resin material.
SW-S Series
SW Series
Single stage water-ring vacuum pump. Perfectly suitable for operation from atmospheric pressure to 8kPa.
Two-stage water-ring vacuum pump Higher durability than single stage and can reduce the pressure down to around 1kPa.
SW-M Series Type mechanical sealed. SW-S7 Model
Exhaust Speed L/min (m3/h) 50Hz
Ultimate Pressure PA
Water Suction Motor Supply Port Exhaust kW L/min Dia Port Dia.
o
W.T.15 C W/SAE
60Hz
SW-150 Size DxWxH (mm)
Weight kg
SW-S7
90 (5.4) 105 (6.3)
6.7
-
0.4
4
PT1/2
PT1/2
334 x 223 x 277
24
SW-S15
250 (15) 1970 (18)
6.7
-
0.75
5
PT1/2
PT1/2
363 x 240 x 353
24
Model
Exhaust Speed L/min (m3/h) at 20 kPa
50Hz 370 SW-25S (22.2) 700 SW-50S (42) SW-100 IIS 1250 (75) SW-150 S 2100 (126) SW-200 S 2500 (150) SW-300 S 4500 (270)
Ultimate Pressure kPA o
Motor kW
60Hz W.T.15 C W/SAE 450 2.3 1.3 1.5 (27) 850 2.3 1.3 2.2 (51) 1500 2.3 0.8 3.7 (90) 2500 2.3 0.8 5.5 (150) 3000 2.3 0.8 7.5 (180) 11 (50Hz) 5500 2.3 0.8 (330) 15 (60Hz)
Water Suction Exhaust Supply Port Dia Port Dia. L/min
Size DxWxH (mm)
Weight kg
6
VF25
PS1
780 x 445 x 494
50
8
VF25
PS1
820 x 454 x 494
58
10
VF40
PS2
1000 x 590 x 605
120
12
VF50
PS2
1154 x 713 x 625
140
16
VF50
50A
1320 x 795 x 760
185
35
VF50
VG80
1610 x 895 x 877
350
1560 x 1220 x 1200 700 SW-600 IIIS 10000 (600) 2.3 0.8 30 80 VF80 150A Note : 1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. 3. Bland packing or mechanical seal can be selected for sealing parts. JIS 10K Flange
SW-C Series
Sealing water circulating vacuum pump Circulating sealing water enables reduction of amount of drain water. The sealing water is cooled with a heat exchanger. It is a compact unit.
Model
SW-25 SC SW-50 SC SW-100 IISC SW-150 SC SW-200 SC SW-300 SC SW-600 IIISC
SW-AS Series • SW-HM Series All stainless made Hastelloy made Excellent corrosion resistance and durability
SW-25SC
Designated Exhaust H/E Ultimate Speed Pressure PA Motor kw Water L/min (m3/h) Supply at 20kPa L/min o 50Hz 60Hz W.T.15 C W/SAE 370 450 2.3 1.3 1.5 12 (22.2) (27) 700 850 2.3 1.3 2.2 13 (42) (81) 1250 1500 2.3 0.8 3.7 17 (75) (90) 2100 2500 2.3 0.8 5.5 33 (126) (150) 2500 3000 2.3 0.8 7.5 45 (150) (180) 4600 (270)
5500 (330)
2.3
0.8
-
80
SW-300AS
Suction Exhaust Port Port Dia. Dia
Size DxWxH (mm)
Weight kg
Model
VF25
PS1
780 x 630 x 730
135
SW-25 AS
VF25
PS1
820 x 652 x 730
150
SW-50 AS
VF40
50A
1000 x 710 x 890
255
SW-100 AS
VF50
50A
1200 x 770 x 1020
310
SW-200 AS
VF50
50A
1416 x 825 x 1045
450
SW-300 AS
770
SW-100 HM
VF50
80A
1610 x 1100 x 1360
SW-300 HM
10000 (600) 2.3 0.8 30 170 VF80 100A 1850 x 1700 x 1930 1650 Note : 1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. 3. Bland packing or mechanical seal can be selected for sealing parts. JIS 10K Flange
Exhaust principle Vacuum side
Flow chart
Valve
Water Suction Exhaust Motor kW Supply Port Port Dia. L/min Dia
Size DxWxH (mm)
Weight kg 50
1.5
6
VF25
PS1
780 x 445 x 494
2.2
8
VF25
PS1
820 x 454 x 494
58
5.5
12
VF50
50A
1210 x 812 x 730
180
7.5
16
VF50
50A
1302 x 796 x 755
185
11 (50Hz) 15 (60Hz)
35
VF50
VG80
1740 x 895 x 878
350
5.5
12
VF40
VF40
1156 x 834 x 700
100
11 (50Hz) 15 (60Hz)
35
VF50
VF50
1460 x 915 x 827
250
Note : 1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. 3. Bland packing or mechanical seal can be selected for sealing parts. 4. For HM Series, only Mechanical seal type is available. JIS 10K Flange
Air Ejector
Image
By mounting an air ejector on the suction port of water-ring vacuum pump, vacuum under vapor pressure of the sealing water can be obtained. The air ejector starts operation by introducing atmosphere. It also prevents cavitation of water-ring vacuum pump.
Bypass circuit Air
Designated Exhaust Ultimate Speed L/min (m3/h) Pressure PA at 20kPa o 50Hz 60Hz W.T.15 C W/SAE 370 450 2.3 1.3 (22.2) (27) 700 850 2.3 1.3 (42) (51) 1250 1630 2.3 0.8 75) (97.8) 2100 2700 2.3 0.8 (126) (162) 3700 4400 2.3 0.8 (222) (264) 1300 1600 2.3 (78) (96) 3500 4300 2.3 (210) (258)
Valve
Air ejector
to Face Applicable Face Port Length Suction Pump Dia. (mm)
Model A
Water ring vacuum pump
Air Introducing Dia.
Weight kg.
SAE-25
SW-25
208
VF25
VG25
1/4 B
3.6
SAE-50
SW-50
245
VF25
VG25
1/4 B
3.8
SAE-100II
SW-100II
312
VF50
VG40
3/8 B
7
SAE-150
SW-150
382
VF50
VG50
3/8 B
7.4
SAE-200
SW-200
336
VF50
VG50
1/2 B
6
SAE-300
SW-300
450
VF50
VG50
3/4 B
9
SAE-600
SW-600
595
VF80
VG80
1B
24
Note :
5
Exhaust Port Dia.
1. VF-VG is a flange for JIS B 2290 vacuum system.
Mechanical Booster Pump • Space development : Space chamber, Fuel firing test, Vacuum heat insulation • Nuclear power industry : Accelerating device, Nuclear fusion, Ultrapure refining • Machinery industry : Turbine balance test, Electronics beam welding
SMB Series
• Metallurgical industry : Vacuum fusion, Vacuum degassing, Vacuum heat treatment • Electronics industry : FPD, Solar battery, Liquid crystal, Vacuum thin film • Chemical industry : Oil refinement, Solvent recovery, Vacuum distillation
Mechanical booster pump which is essential to high efficiency vacuum system and has excellent exhaust characteristic Exhaust Speed m3/hr
Model
Suction side Ultimate Limit Pressure Motor Pressure kPa kW Pa 60Hz 50Hz 60Hz
50Hz SMB-200 SMB-C06(M) SMB-C15(M) SMB-C25
SMB-CO6
160
190
0.2
130
150
430
500
600
0.13
1.6
500
600
330
13.3
1250
1500
0.13
1.5
1.3
3.7
SR-37B II
1050
1250
300
6.3
5.3
5.5
SW-600 III
2100
2500
0.13
1.6
7.5
SR-75 II
2100
2500
10
1.6
7.5
SMB-C06 ~ SW-300
4800
0.13
2.7
15
SRP-15000 B
4400
11
1.3
11
SMB-C15 ~ SW-600III SMB-C25 ~ SRP-15000
SMB-C5000
SMB-D Series
6.3
5.3
Min. Suction Exhaust Lubricant Cooling Amount Water Port Port L Dia. Dia. L/min
Back Pump
1.5
SR-500
1.5
SW-100 II
1.3
2.2
SR-1500B
10.7
3.7
SW-300
13.3
1.3
Size DxWxH (mm)
Weight kg
0.4
3
VG 80
VF 50
930 x 367 x 565
120
1.4
3
VG 100
VG 80
906 x 330 x 410
160
1.8
3
VG 150
VF 100 1075 x 410 x 520 270
6
5
VG 200
VF 150 1246 x 450 x 550 395
6
5
VG 250
VG 200 1400 x 1250 x 990
730
VG VF SMB -10000 10500 0.07 1.3 22 8 350 250 1665 x 1790 x 1175 2500 Note : 1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. 3. “M” at the end of model number stands for magnet coupling which can start from atmospheric pressure.
Mechanical booster pump of aluminum alloy which realizes weight saving Exhaust Speed m3/hr
Model
SMB-600D(M)
Note :
Back Pump
50Hz
60Hz
75
90
0.01
0.75
SVC-300
70
80
400
0.75
SW-50
215
255
0.01
1.5
SR-800
200
240
400
1.5
SW-150
430
510
0.01
2.2
SR-1500B
SMB-100D(M) SMB-300D(M)
Ultimate Pressure Motor kW Pa
Min. Lubricant Cooling Amount Water L L/min
Suction Port Dia.
Exhaust Port Dia.
Size DxWxH (mm)
Weight kg
VG50
VF40
580 x 237 x 228
20.4
0.2
3
0.34
3
VG80
VF50
712 x 275 x 282
35
0.6
3
VG100
VF80
780 x 353 x 342
576
1. The weight does not include motor. 2. VF-VG is a flange for JIS B 2290 vacuum system. 3. “M” at the end of model number stands for magnet coupling which can start from atmospheric pressure.
SMB-100DM
Options : Integrate to the reduction of exhaust time Magnet Coupling (Atmospheric drive)
Bypass Valve (Loosening limit pressure of suction)
Inverter Control (Atmospheric drive)
Aftercooler (Cooling of exhaust gas)
Oil Diffusion Pump
SD Series
Essential pump to the exhaust system which performs large exhaust amount at high vacuum level Effective in the case of requiring ultimate pressure at 10-5~10-1 Pa Model
B
C
(H)
A
Cooling Water Suction Exhaust Standard Amount Port Dia. Port Dia. Aux. Pump L/min
Size A x B x C x (H) (mm)
Weight kg 6
SD-3S
300
0.12
0.35
1.5
VG80
VF25
SVC-150
300 x 110 x 110
SD-4S
450
0.18
0.4
2
VG100
VF25
SR-500
335 x 130 x 150
8
SD-6S
1000
0.45
0.55
3
VG150
VF50
SR-1500
535 x 180 x 220
16
0.75
1.3
4
VG200
VF50
SR-1500
565 x 220 x 230
30
1.3
1.5
5
VG250
VF50
SR-25B II
630 x 260 x 270
2.7
2.6
10
VG350
VF100
SR-37B II 830 x 350 x 370 x (1000)
3.5
3.3
12
VG400
VF100
SR-75B II 870 x 380 x 400 x (1200)
200
6
6
15
VG550
VF150
SR-75B II
370
SD-8S
1700
SD-10S
3000
SD-14
5000
SD-16
7000
SD-22
13000
Note :
SD-16
Exhaust Ultimate Critical Oil Back Amount Speed Pressure Pressure Power L/min Pa L Pa
3x10-5
13
10
1. SD-3S ~ SD-10S Stainless steel made, SD14 ~ SD22 Iron made+Ni plating. 2. Subsidiary stand is included for model SD-14 and bigger. 3. Water cooling baffle (option) is not included.
Subsidiary stand
6
1200 x 480 x 600 x (1400)
56 120
Vacuum Exhaust System â&#x20AC;˘ Essential system requiring a large capacity exhaust or ultimate pressure to the high vacuum level. â&#x20AC;˘ We suggest the most suitable vacuum systems according to applications of customers.
SMB-DP Series
Since neiter sealing liquid nor oil is necessary, it is suitable for applications of pharmaceutical, food and semiconductor which require the cleanliness of products. The model contributes to reducing environmental load by substantially reducing waste water and oil. Sucked processing gas can be retrieved or recoverd.
SMB-RP Series
According to operational pressure and exhaust time, the most suitable combination can be suggested. It realizes to obtain high vacuum at low cost.
SMB-WP Series
Using a number of mechanical booster pumps and air ejectors, the ultimate pressure at 1 Pa can be obtained, which is impossible to meet with a single water ring vacuum pump. At the same time, vapor or organic solvent can be steadily exhausted.
SMB-C06WPC
Model No. Description
DP
1
2
SMB-
Also available is a sealing water circulating type which largely saves displacement capacity.
1 Mechanical booster pump model no. 2 Backing pump model DP .... Dry Vacuum Pump RP .... Oil Rotary Vacuum Pump WP .... Water ring Vacuum Pump
SMB-DP Flow Chart
SMB-RP Flow Chart
SMB-WP Flow Chart V.S. V.S.
V.S.
V.S.
MB MB
MB
AEJ
RP
DP
: Vacuum Valve
V.S.
: Vacuum Switch
WP
: Below Flange
S Unit
Light and compact, high performance unit combining SMB-D with SGD
Model
Exhaust Speed L/Min (m3/hr)
Ultimate Pressure Pa
Pump Model
Motor kW
50Hz
60Hz
S104(M)
1250 (75)
1500 (90)
SMB-100D(M)
0.75
SGD-400
0.75
S306(M)
3600 (216)
4250 (255)
SMB-300D(M)
1.5
S609(M)
7200 (432)
8500 (510)
Note :
0.01
SGD-600
1.5
SMB-600D(M)
2.2
SGD-900
1.5
Min. Cooling Water L/min
Suction Port Dia.
Exhaust Port Dia.
Size WxHxL (mm)
Weight kg
3
VG50
Rc1
262 x 523 x 647
93.5
3
VG80
Rc1
347 x 614 x 747
149
3
VG100
Rc1/2
377x 711 x 817
185
1. (M) represents for Magnet Coupling, which enables start operation at atmospheric pressure.
S104M
7
Vacuum Gauge / Vacuum Valve / Vacuum Parts
Analog type Pirani Vacuum Gauge
Measurable range 0.2~2000Pa Model
PG-SX
PG-SY
PG-SSW
PG-SSY
Measurable range
20~2000
0.2~100
0.2~2000*1
0.2~100
Measured Point Recorder output (mV)
AC100V 20VA
Outer Dimension (HxWxL)
PG-SSW
PG-MW2
Digital Type Pirani Vacuum Gauge
190 x 125 x 260 (Portable type) 3.3
3.3
3.4
190 x 125 x 210 ( Portable type) 2.55
2.6
Tube
PG-85 Ø15 2pcs.
4 pcs.
6 pcs.
3.4
2.5
Code
Single core shielded wire 2.5 m 2 pcs.
4 pcs.
6 pcs.
Note : 1. There is a panel type and portable type. 2. SGP gauge port to install a tube is necessary.
Measurable range 0.1~2000Pa Model
PG-DP2
PG-C1
Measuring range (Pa)
0.1~2000
Measured point
2 points (concurrent measurement)
1 point
Pressure Indication
4 digits
Significand 2 digits, Exponent part 1 digit*1
Recorder output (DC mv) 0~100 (before shipment) / 0~10 (switchable) Data output
0~100.75
RS-232C
RS-485 2 lines*2 (≥AC/DC 400V 0.5A)
Contact
PG-DP2
6 points
Only meter, No contact output
0-10 (Recorder with 10 kΩ or more input impedance is used.)
Power (50/60Hz)
Accessory
PG-MW6
4 points
2 line*2
1 line*2
PG-MW4 0.2~2000*1
2 points
Contact
Weight (kg)
PG-MW2
Power (50Hz/60Hz)
AC100V 7VA
AC100/200V 7VA
Outer Dimension (HxWxL)
132.5 x 110 x 228
78 x 71 x 110
Weight (kg)
1.6
0.35
Tube
PG-85 Ø15 2 pcs.
PG-85 Ø15 1 pc.
Code
2-core shielded wire 2.5 m 2 pcs.
2-core shielded wire 2.5 m 1 pc.
PG-C1
Accessory
Note : 1. PG-C1 is a controller only. 2. SGP gauge port to install a tube is necessary. 1. Indicator MM-C1 (Option) is needed. 2. 2 lines per one measured point.
Digital type Ionization Vacuum Gauge
Measurable range 10-5~0.1Pa Model
9710
IG-C1 1 x 10-5 ~ 1 x 10-1
Measuring range (Pa) Measured point
1 point
1 point
Pressure Indication
Significand 2 digits, Exponent part 1 digits
Significand 2 digits, Exponent part 1 digit*1
Recorder output (DC mv) 0~100 (before shipment) / 0~10 (switchable) RS-232C
RS-485
Contact
2 lines ( AC/DC 2A)
2 lines( DC12~24V 2A)
Power (50Hz/60Hz)
9710
AC100V 50VA at measurement 140VA at electron impact
Outer Dimension (HxWxL)
132.5 x 220 x 228
Weight (kg)
6
Accessory
IG-C1
0-10
Data output
140 x 100 x 220 3.5
Tube
SVG-3 Ø15 1 pc.
Code
4-core VCT wire 2 m 1 pc.
Note : 1. IG-C1 is a controller only. 2. SGP gauge port to install a tube in necessary. 1. Indicator MMC-C1 (Option) in needed.
Vacuum Valve
Vacuum Parts SBF Bellow Flange
SNV-L Pneumatic Vacuum Valve (L type)
Vacuum Switch
1B ~ 22B SV-L Manual Vacuum Valve (L type) 3/4B ~ 14B SNV-S Pnematic Vacuum Valve (Straight type)
SNV-2L To prevent vibration of piping from vacuum pump
1B ~ 22B SV-S Manual Vacuum Valve (Straight type) 3/4B ~ 14B SV-2S
Inlet Dust Filter For suction of dust powder
High accuracy, long like vacuum switch. Useful for start-up of mechanical booster pump and operation of vacuum valve, air ejector
ตัวแทนจำ�หน่าย / Distributor Union Tech Engineering Co.,Ltd.
บริษัท ยูเนี่ยน เทค เอ็นจิเนียริ่ง จำ�กัด
84 Leabklongsong Rd., Bangchan, Klongsamwa Bangkok 10510 Thailand Tel: 02-907-3530 Fax: 02-907-3531 E-mail: sales@uniontech-vacuum.com www.uniontech-vacuum.com