TECHNICAL DATA SHEET ONEWIPE TM HAND WIPES HW101
Description The TYGRIS OneWipeTM can be used by professionals in all trades and will clean almost anything! These large, strong and absorbent hand wipes contain a powerful heavy-duty cleaner which is proven to remove tough stuff whilst remaining safe for use on hands. Antibacterial in nature, OneWipeTM Hand Wipes require no rinsing of the hands making them not only safe on skin but also an everyday essential for professionals in all trades. The OneWipeTM Hand Wipes are extremely effective for the fast removal of contaminates such as dirt, grease and grime, oil, ink and petrol from hands tools, and work surfaces. They will even clean up adhesive, bitumen, expanding foam, epoxies, jointing compound, mastic, paint, polyurethane, polyester fillers, sealant and many other wet and semi-cured substances. Benefits & Features • • • • •
Highly absorbent material Specially formulated to remove common contaminants found in most trades and industries Anti-bacterial by design 110 wipes per TYGRIS tub Foil sealed for freshness and long storage life
Directions for Use Remove the container lid and tear off the seal. Locate the start of the wipes in the centre of the roll and feed through the opening in the lid. Replace and secure the lid and pull through wipes as required. To prevent wipes from drying out, close the lid cap immediately after use. Use only as directed. Technical Data Appearance:
Perforated, white wipe Cloth Size: 30cm x 20cm 21gsm (dry weight of wipe)
Odour: Contents:
Citrus Scent
Storage:
Health & Safety
Store in the original container in cool dry conditions, between 5˚C and 25˚C Approximately 24 months from date of manufacture when stored away from direct sunlight Consult COSHH/MSDS (available at tygrisindustrial.com)
Pack Sizes
HW101: 110 wipes per TYGRIS tub, 6 tubs per box
Shelf Life:
See tub label for list of ingredients
Note This technical data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.
31 Kyle Road, Irvine KA12 8LE Tel: +44 (0) 1294 311 066 technical@tygrisindustrial.com
Version 2 Page 1 of 1