thermal arc shop by United Welding Supplies

2013 Product Guide

Contents

Thermal Arc Welding Equipment Part No

Page

W1003605 W1002903

DC Stick + TIG Inverters and AC/DC Machines 161S 175SE

5 6

W1003003 W1003803

175TE 201 TS

7 8

10-3091 10-3091WC

400 TS Air Cooled 400 TS Water Cooled

9 10

W1006306 10-3099 10-3098 10-3098WC 10-9403

202 AC/DC 200 AC/DC 300 AC/DC 300 AC/DC Water Cooled 350 AC/DC MIG Machines Fabricator 181i Fabricator 211i Fabricator 252i Fabricator 250 III Compact Fabricator 320 III Compact Fabricator 320 III Separate Fabricator 400 III Separate Fabricator 500 III Separate PowerMaster Plus 320SP Air Cooled PowerMaster Plus 400SP Air Cooled PowerMaster Plus 400SP Water Cooled PowerMaster Plus 500SP Water Cooled PowerMaster Plus 400SP Robotic PowerMaster Plus 500SP Robotic Digital Torches - Air Cooled Digital Torches - Water Cooled

11 12 13 14 15

W1003186 W1004207 W1004408 FAB250C FAB320C FAB320S FAB400S FAB500S W1000103PP W1000303PP W1000203PP W1000503PP W1000403PP W1000603PP DSA.40 DSW.300/DSW.450

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Tweco Arc Accessories Refer to Page Refer to Page Refer to Page

TWE European MIG Torches Classic Tweco MIG Torches MIG Torch Consumables

50 50 51

161 S

1ph 110/230V Input, 160A Stick Inverter with Lift-Start TIG Function

POWER FACTOR CORRECTION

Processes: STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1003605

30% @ 160A (230v) 35% @ 100A (110v)

10 - 160A 10 - 125A

229 x 135 x 394 mm

7.9 kg

Part No.

Description

W1003605

TA 161S 160 Amp Inverter Package, electrode holder and lead, earth cable and clamp with 50mm connections.

List Price £ 500.00

OPTIONS AND ACCESSORIES 305.050.404 305.050.804 10-9997

TIG Torch with valve SA17V.4m TIG Torch with valve SA17V.8m 50mm² DINSE TIG Torch Adapter

Machine Specifications

83.15 116.40 35.26 I efficiency

Mains Input Voltage Open Circuit Voltage Protection Factor Warranty Period

1ph. 110/230v 71V

IP23S 2 Years

110V = 17.8A 230V = 14.7A

Features

Benefits

Dual Voltage Input Power Excellent Portability Thermal Overload Protection with indicator Automatic Arc Control

Suitable for use on 110 or 230 VAC Weighs less than 8kg and has easy to carry shoulder strap Alerts operator if duty cycle is exceeded or airflow is blocked

50mm Output Terminals Lift Start TIG Dual Voltage Input Power Factor Correction

For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating an inclusion Allow for easy polarity reversal and cable change Provides TIG arc starting without use of high frequency Automatically linking to 110 or 230 VAC ‘The greener option’ offers a higher output while reducing input power consumption!

2 1

Item Description 1 Amperage Control – the amperage control selects the desired amperage between 10–160A (230v) and 10-125A (110v) 2 Warning Indicator – illuminates if machine overheats causing thermal overload 3 Power ON/OFF indicator 4 Process selection switch. Allows operator to choose output function from ‘Lift TIG’ or ‘Manual Arc’ process

WELDING EQUIPMENT

DUAL V OLTAGE 230 / 110 v

STICK (SMAW) INVERTER

WELDING EQUIPMENT

STICK (MMA) INVERTER

ARCMASTER 175 SE

1ph 230V Input, 175A Stick Inverter with Lift-Start TIG function

Processes: STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1002903

20% @ 1750A (TIG) 20% @ 175A (STICK)

5 - 175A

230 x 130 x 330 mm

6.5 kg

Part No.

Description

W1002903

TA 175 SE 175 Amp Inverter Package, electrode holder and lead, earth cable and clamp with 50mm connections.

List Price £ 378.00

OPTIONS AND ACCESSORIES 305.050.404 305.050.804 10-9997

TIG Torch with valve SA17V.4m TIG Torch with valve SA17V.8m 50mm² DINSE TIG Torch Adapter

Machine Specifications

83.15 116.40 35.26 I efficiency

Mains Input Voltage Open Circuit Voltage Warranty Period

1ph. 230v 65V

17A

2 Years

Features

Benefits

Exceptional Performance Excellent Portability

Smooth stable arc with electrodes to 4mm Weighs less than 6.5kg and has easy to carry shoulder strap

Thermal Overload Protection Easy to Use Cable Fitted 50mm Output Terminals Lift Start TIG Over Voltage Protection

Indicator alerts if duty cycle is exceeded or airflow is blocked Simple, user friendly set up and operation Supplied with 230VAC primary cable Allow for easy polarity reversal and cable change Provides TIG arc starting without use of high frequency Full input protection for over voltage Item Description 1 Power on Indicator. Visibly indicates that input power is present 2 Process selection switch. Allows operator to choose output function from ‘Lift TIG’ or ‘Manual Arc’ process 3 Over temperature indicator. Illuminates if machine duty le has been exceeded 4 Weld current control (Amperage). Allows operator to set output welding amperage

ARCMASTER 175 TE

1ph 230V Input, 175A TIG Inverter with HF TIG, Lift-Start TIG and Stick functions

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1003003

20% @ 175A

5 - 175A

225 x 130 x 330 mm

7.5 kg

Part No.

Description

W1003003

TA 175 TE Inverter Power Source with 17 Style TIG Torch, gas hose, electrode holder and lead, earth cable and clamp with 50mm connections.

List Price ÂŁ 788.00

OPTIONS AND ACCESSORIES W4012800 W4012700 10-9811

Site Carry Case TIG Torch, 17, 3m, 50mm Dinse with 5/8â&#x20AC;?-18 UNF Male gas fitting Plug for Remote or TIG Torch Button

Machine Specifications

Mains Input Voltage Open Circuit Voltage Warranty Period

I efficiency

1ph. 230v 65V

17.9A

2 Years

Features

Benefits

Thermal Overload Protection with Indicator Adjustable Arc Control

Alerts the operator if duty cycle is exceeded or fan is blocked For manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick For TIG welding - the operator can adjust the time for the weld current to ramp down to eliminate craters Provides TIG arc starting without use of high frequency 2T (Normal) for short weld rund and 4T (Latch) for long weld runs Full input protection for over voltage

Adjustable Down Slope control Lift Start TIG Trigger Control Over Voltage Protection

49.58 128.52 26.78

3 4

Item Description 1 Power on indicator 2 Amperage control - the amperage control selects the desired amperage between 5 - 175A 3 Thermal overload indicator 4 Trigger mode selection switch (TIG process only) 5 Adjustable Arc Control (Manual Arc (Stick) process only) or Adjustable Down Slope Control (TIG process only) 6 Manual Arc (Stick), Lift TIG, HF TIG weld process selection control 7 Eight pin socket for torch trigger switch connection (Remote weld current control is not available) 8 50mm Dinse weld terminals

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

DUAL V OLTAGE 230 / 110 v

TIG TOR FITTED A CH REMOTE S STAND ARD

TIG (GTAW) INVERTER

ARCMASTER 201 TS

1ph 110/230V Input, 200A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, 2T/4T Function, Down Slope Timer and Arc Force Control

POWER FACTOR CORRECTION

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1003803

20% @ 200A

10 - 200A (230v) 10 - 160A (110v)

230 x 135 x 445 mm

10 kg

Part No.

Description

W1003803

TA 201TS Inverter Power Source 200 Amp Inverter Package with 26 Style TIG Torch with remote current control, electrode holder and lead, earth cable and clamp with 50mm connections.

List Price £ 1,260.00

OPTIONS AND ACCESSORIES 10-4016 W4013601 10-9811 TM-1MS-5H

Remote Foot Control 7.6m lead and plug TIG Torch, 26, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting Plug for Remote or TIG Torch Button Replacement TIG Torch Trigger

Machine Specifications

I efficiency 110V = 20A Open Circuit Voltage 71V Warranty Period 2 Years 230 = 16A

Mains Input Voltage 1ph. 110/230v IP23S Protection Factor Features

Benefits

Dual Voltage Input Power Thermal Overload Protection Adjustable Arc Control

Suitable for use on 110 or 230 VAC Alerts the operator if duty cycle is exceeded or fan is blocked with indicator For Manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick For TIG welding - the operator can adjust the time for the weld current to ramp down to eliminate craters Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination 2T (Normal) for short weld runs and 4T (Latch) for long weld runs Full input protection for over voltage ‘The greener option’ offers a higher output while reducing input power consumption!

Adjustable Down Slope Control Lift-Start TIG HF Arc Starting Trigger Control Over Voltage Protection Power Factor Correction

1 4 6

312.90 150.20 26.78 13.25

Item 1 2 3 4 5 6

Description Power indicator Light Overheat / Fault Indicator Light 2T/4T Trigger Switch / Hold Stick / Lift TIG / HF TIG Process Switch Down Slope / Arc Force Control Knob Weld Amperage Controk Knob

ARCMASTER 400 TS

400V Input, 400A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3091

25% @ 400A

5 - 400A

420 x 220 x 450 mm

21 kg

Part No.

Description

10-3091

TA 400 TS 400 Amp DC TIG Inverter Power Source with mains cable, TIG torch plug (10-2096) and cable clamp (10-2097)

List Price £ 4,379.00

OPTIONS AND ACCESSORIES CART.2 10-2007 10-2005 10-2096 10-2097 304.090.404

ArcMaster 3.1 Workshop Cart Remote Foot control 7.6m lead and plug Remote Hand Pendant 7.6m lead and plug 14 Pin Plug for Remote or TIG Torch Button Cable Clamp for 14 Pin Plug SA.26.4 TIG Torch

Machine Specifications Mains Input Voltage Protection Factor

3ph. 380/415v IP23S

Open Circuit Voltage Warranty Period

289.00 396.93 660.14 48.04 8.05 108.22

65V 3 Years

I efficiency 14A

Features

Benefits

Smart Logic® Thermal Overload Protection with Indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts the operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches Allows remote devices to be connected for controlling amperage and output contactor Alerts operator of power supply abnormalities VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Allowing for 5 welding programmes to be saved for maximum flexibility as standard features Provides TIG arc starting without use of high frequency For STICK welding - Provides ease of arc starts Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Gives memory rogrammes which can easily be saved and recalled to give job settings to the operator at the push of a button

Programmable Lift Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter Memory Settings

Item Description 1 2

6 3 5

3 4 5 6 7

Pulse Function - enables the TIG current pulse functions Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is being adjusted on the Sequence Graph TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) Digital LED Display - Welding amperage and parameter values are displayed in this window, internal warnings such as over temperature, lor ow high input voltage applied are signalled to the operator by a warning sound and error message on the screen Save/Load Buttons (400 TS) - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programmes Process Button - This button slects between STICK, HF TIG or Lift TIG mode Control knob - allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

TIG (GTAW) INVERTER ARCMASTER 400 TS WATER COOLED PACKAGE

400V Input, 400A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3091WC

25% @ 400A

5 - 400A

420 x 220 x 450 mm (P/S)

21 kg

Part No.

Description

10-3091WC

TA 400 TS 400 Amp DC TIG Inverter Power Source with water-cooler, workshop cart, SA18 TIG Torch, TIG adaptor, coolant, mains cable, TIG plug and cable clamp

List Price £

OPTIONS AND ACCESSORIES

CART.2 ArcMaster 3.1 Workshop Cart WC.ARCM3.1 ArcMaster Cooler 10-2007 Remote Foot control 7.6m lead and plug 10-2005 Remote Hand Pendant 7.6m lead and plug 10-2096 14 Pin Plug for Remote or TIG Torch Button 10-2097 Cable Clamp for 14 Pin Plug 302.050.404 SA.18.4 TIG Torch GAS50381 TIG Torch Adaptor 7-3580 Torch Coolant (3.8l) Machine Specifications Mains Input Voltage 3ph. 380/415v Open Circuit Voltage Protection Factor IP23S Warranty Period

65V 3 Years

5,880.00

289.00 1134.00 396.93 660.14 48.04 8.05 134.82 20.48 21.79 I efficiency 14A

Features

Benefits

Smart Logic® Thermal Overload Protection with Indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Programmable Lift Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter Memory Settings

Item Description

1 2

2 7

6 3 5

3 4 5 6 7

TIG (GTAW) INVERTER

ARCMASTER 202 AC/DC

1ph 230V Input, 200A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1006306

20% @ 200A

5-200A

400 x 240 x 475 mm

22 kg

Part No.

Description

W1006306

Arcmaster 202 AC/DC 200 Amp AC/DC TIG Inverter Power Source with 3m 26 Style TIG Torch with remote current control, electrode holder and lead, gas hose, earth cable and clamp with 50mm connections

List Price ÂŁ 1,575.00

OPTIONS AND ACCESSORIES 10-4016 W4013601 10-9811 TM-1MS-5H

Remote Foot Control 7.6m lead and plug TIG Torch, 26, 3m, 50mm Dinse with 5/8â&#x20AC;?-18 UNF Male gas fitting Plug for Remote or TIG Torch Button Replacement TIG Torch Trigger

Machine Specifications Mains Input Voltage Protection Factor

Features

1ph. 230v IP23S

Open Circuit Voltage Warranty Period

72V 2 Years

312.90 150.20 26.78 13.25

I efficiency 15.5A

Benefits

Thermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blocked Simple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button switches Adjustable Arc Control For manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick Remote Receptacle Allows remote devices to be connected for controlling amperage and output contactor Lift Start TIG Provides TIG arc starting without use of high frequency HF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contamination TIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control

1 2

6 5

1 2 3 4 5 6 7 8

- Selection key for Stick or TIG mode - Selection key for Pulse - Selection key for Purge - Programme reverse button - Amperage control knob - Programme advance button - 2 stroke or 4 stroke mode indicator - Selection key for HF or Lift Arc TIG

WELDING EQUIPMENT

TIG To remotercch with control s urrent as stanudpplied ard

WELDING EQUIPMENT

TIG (GTAW) INVERTER

ARCMASTER 200 AC/DC

1ph 230V Input, 200A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3099

25% @ 200A / 40% @ 160A

5 - 200A

360 x 180 x 420 mm

17 kg

Part No.

Description

List Price £

10-3099

TA 200 AC/DC 200 Amp TIG Inverter Power Source with mains cable and Tig plug (10-9811)

3,413.00

OPTIONS AND ACCESSORIES 10-4016 10-9811 304.090.404

Remote Foot control 7.6m lead and plug Plug for Remote or TIG Torch Button SA.26.4 TIG Torch

Machine Specifications Mains Input Voltage Protection Factor

1ph. 230v IP23S

Features

Open Circuit Voltage Warranty Period

312.90 26.78 108.22

65V 3 Years

I efficiency 22A

Benefits

Smart Logic® Eliminates damage if the machine is accidentally installed to the improper voltage Thermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blocked Simple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button switches Remote Receptacle Allows remote devices to be connected for controlling amperage and output contactor Warning Circuitry Alerts operator of power supply abnormalities VRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Lift Start TIG Provides TIG arc starting without use of high frequency HF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contamination TIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Parameter Memory Settings Gives memory rogrammes which can easily be saved and recalled to give job settings to the operator at the push of a button

Item Description 1 2 3 4 5

6 7

Pulse Function - enables the TIG current pulse functions Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is being adjusted on the Sequence Graph TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) Digital LED Display - Welding amperage and parameter values are displayed in this window, internal warnings such as over temperature, lor ow high input voltage applied are signalled to the operator by a warning sound and error message on the screen Control knob - allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value Process Button - This button slects between STICK, HF TIG or Lift TIG mode AC/DC Button - Selects between AC or DC welding output

ARCMASTER 300 AC/DC

3ph 400V Input, 300A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/ Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3098

25% @ 300A / 40% @ 250A

5 - 300A

420 x 210 x 450 mm

24 kg

Part No.

Description

10-3098

TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source with mains cable, TIG plug (10-2096) and cable clamp (10-2097)

List Price £ 5,472.00

OPTIONS AND ACCESSORIES CART.2 WC.ARCM3.1 10-2007 10-2005 10-2096 10-2097 GAS50381 304.090.404

289.00 1134.00 396.93 660.14 48.04 8.05 20.48 108.22

ArcMaster 3.1 Workshop Cart ArcMaster Cooler Remote Foot control 7.6m lead and plug Remote Hand Pendant 7.6m lead and plug 14 Pin Plug for Remote or TIG Torch Button Cable Clamp for 14 Pin Plug 50mm2 DINSE TIG Torch adapter SA.26.4 TIG Torch - air cooled

I efficiency

Machine Specifications Mains Input Voltage Protection Factor

3ph. 400v IP23S

Open Circuit Voltage Warranty Period

65V 3 Years

12A

Features

Benefits

Smart Logic® Thermal Overload Protection with Indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Programmable Lift Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter Memory Settings

1 2

9 8

7 3

Item Description 1 Pulse Function - enables the TIG current pulse functions 2 Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is being adjusted on the Sequence Graph 3 TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) 4 Digital LED Display - Welding amperage and parameter values are displayed in this window, internal warnings such as over temperature, lor ow high input voltage applied are signalled to the operator by a warning sound and error message on the screen 5 Save/Load Buttons (400 TS) - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programmes 6 Process Button - This button slects between STICK, HF TIG or Lift TIG mode 7 Control knob - allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

TIG (GTAW) INVERTER

ARCMASTER 300 AC/DC WATER-COOLED PACKAGE

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3098WC

25% @ 300A / 40% @ 250A

5 - 300A

420 x 210 x 450 mm

24 kg

Part No.

Description

10-3098WC

TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source with watercooler, workshop cart, 4m SA18 TIG Torch, TIG Adaptor, coolant, mains cable, TIG plug and cable clamp

List Price £

OPTIONS AND ACCESSORIES CART.2 WC.ARCM3.1 10-2007 10-2005 10-2096 10-2097 302.050.404 GAS50381 7-3580

289.00 1134.00 396.93 660.14 48.04 8.05 134.82 20.48 21.79

ArcMaster 3.1 Workshop Cart ArcMaster Cooler Remote Foot control 7.6m lead and plug Remote Hand Pendant 7.6m lead and plug 14 Pin Plug for Remote or TIG Torch Button Cable Clamp for 14 Pin Plug SA.18.4 TIG Torch - water cooled TIG Torch Adaptor Torch coolant (3.8l)

I efficiency

Machine Specifications Mains Input Voltage Protection Factor

6,983.00

3ph. 400v IP23S

Open Circuit Voltage Warranty Period

65V 3 Years

12A

Features

Benefits

Smart Logic® Thermal Overload Protection with Indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Programmable Lift Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter Memory Settings

1 2

9 8

7 3

ARCMASTER 350 AC/DC

3ph 400V Input, 350A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control & IP & RPI Adjustment

Processes: STICK / LIFT TIG / HF TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

10-9403

40% @ 350A / 60% @ 300A

3 - 350A

704 x 279 x 460 mm

Part No.

Description

10-9403

TA 350 AC/DC 350 Amp AC/DC TIG Inverter Power Source with HD Inverter Cart, HD Cooler TIG, mains cable, and TIG plug (C04025)

Weight 39 kg List Price £ 6,757.00

OPTIONS AND ACCESSORIES 10-9996 010330 C04025 GAS50381 302.050.404

312.90 427.78 34.20 20.48 134.82

Thermal Arc Remote Foot Control 7.6m lead and plug Thermal Arc Remote Hand Control 10m RC01 5 Pin TIG Plug 50mm2 DINSE TIG Torch adapter SA.18.4 TIG Torch - water cooled

I efficiency

Machine Specifications Mains Input Voltage Protection Factor

3ph. 400v IP23

Open Circuit Voltage Warranty Period

57V 2 Years

14.3A

Features

Benefits

Smart Logic® Thermal Overload Protection with Indicator Simple to use Control Panel Interface Automatic Arc Control

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts the operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating and inclusion Allows remote devices to be connected for controlling amperage and output contactor Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Adjusts the amperage value for the positive/cleaning cycle in AC welding, giving heat input and bead control to the weld profile Adjusts the arc polarity to give precise arc ignition at the tungsten point Gives memory rogrammes which can easily be saved and recalled to give job settings to the operator at the push of a button

Remote Receptacle Lift Start TIG HF Arc Starting TIG Pulser & Sloper IP Adjustment RPI Adjustment Parameter Memory Settings

F1 - Welding mode setting key «MMA»/«TIG 2 stroke»/«TIG 4 stroke» F2 - SET UP setting key F3 - PULSE ON/OFF setting Key F4 - Low current adjustment setting key F5 - PULSE frequency adjustment setting key F6 - AC ON/OFF setting key F7 - AC frequency adjustment setting key F8 - Cleaning/penetration balance setting key F9 - Setting key for SETUP choice and for parameters: pregas, initial current, up-slope time F10 - Setting key for SETUP choice and for parameters: post gas duration, final current F11 - Digital display F12 - Digital display F13 - Knob for all parameters adjustment F14 - Knob for down slope time adjustment F15 - Indicator «MMA welding» F16 - Indicator «2 stroke TIG welding» F17 - Indicator «4 stroke TIG welding» F18 - Indicator «current in A» displayed on F11 F19 - Indicator «value in %» displayed on F11 F20 - Indicator «time in s» displayed on F11 F21 - Indicator «frequency in Hz» displayed on F11

Please note:

F22 - Indicator «dimension in mm» displayed on F11 F23 - Indicator «pre gas duration» in modification F24 - Indicator «initial current» in modification F25 - Indicator «up-slope time» in modification F26 - Indicator «PULSE mode» ON F27 - Indicator «AC mode» ON F28 - Indicator «final current» in modification F29 - Indicator «post gas duration» in modification F30 - Indicator main supply default F31 - Indicator cooler unit default

To fit a 3 piece water cooled TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997)

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

INVERTER MIG (GMAW) MACHINE

FABRICATOR 181i

1ph 230V Input, 180A Compact MIG & Multiprocess Inverter 5kg/7.5kg wire spool capacity

Processes: MIG / FLUX CORED / STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1003186

20% @ 180A

10 - 180A

410 x 210 x 450 mm

14.6 kg

Part No.

Description

W1003186

Fabricator 181i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm knurled and hard wire and 1 - 1.2mm soft wire, gas hose, Tweco MIG Torch, earth cable and clamp, mains cable

List Price ÂŁ 977.00

OPTIONS AND ACCESSORIES 62020 62022 62179 62024 62028 62023 WS180XE-10-3035 310.050.002 10-4016 W7004930 W4015300 W4014700

0.6/0.8mm Hard Wire V groove feed roll 0.9/1.2mm Hard Wire V groove feed roll 0.8/1.0mm Soft Wire U groove feed roll 0.9/1.2mm Soft Wire U groove feed roll 0.8/0.9mm Cored Wire V knurl feed roll 1.2/1.6mm Cored Wire V knurl feed roll Tweco Weldkill 180A MIG Torch, 3m 17V Tig Torch with 4m Lead 7.6m Foot Control Replacement Gas Hose Soft Carry Bag Basic Utility cart

29.88 29.88 29.88 29.88 29.88 29.88 90.15 121.09 312.90 20.88 50.40 326.00

I efficiency

Machine Specifications Mains Input Voltage 1ph. 230v Welding Current Range 10 - 180A Protection Factor IP23S Warranty Period 2 Years

16.6A Wire Drive Type MIG MMA TIG

Welding Output

2 Roll 20% @ 180A 20% @ 175A 25% @ 175A

Features

Benefits

Digital Meters Thermal Overload Protection with Indicator Adjustable Burn Back Control Trigger Latching Facility Reverse Polarity Facility 50mm Output Terminals

Allows the operator to easily check and adjust parameters Alerts operator if duty cycle is exceeded or airflow is blocked Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs in MIG and TIG modes Allows use of self shielding wires for outdoor applications Allows for easy polarity reversal and cable change

3 4

Item 1 2 3 4 5 6 7 8 9

Description Power Indicator Thermal Overload Indicator Digital Voltage Meter Push-Button Process Selection Push-Button Trigger Mode Control Variable Inductance Control Multifunction control - Infinitely Variable Voltage / Down Slope / Arc Force Control Amperage Control Digital Amperage Meter

INVERTER MIG (GMAW) MACHINE

FABRICATOR 211i

1ph 110/230V input, 210A Compact MIG & Multiprocess Inverter 15 kg Wire Spool Capacity

POWER FACTOR CORRECTION

Processes: MIG / FLUX CORED / STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1004207

20% @ 210A (230V) 20% @ 140A (110V)

10 - 210A (230V) 10 - 140A (110V)

435 x 266 x 617 mm

26 kg

Part No.

Description

W1004207

Fabricator 211i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm knurled and hard wire and 1 - 1.2mm soft wire, gas hose, Tweco MIG Torch, electrode holder and lead, earth cable and clamp with 50mm connections

List Price £ 1,292.00

OPTIONS AND ACCESSORIES 62020 62022 62179 62024 62028 WS220XE-10-3035 SG160XTA12-3035 310.090.001 10-4016 W4014700 W4015001 W4015002 872726 W7004930

0.6/0.8mm Hard Wire V groove feed roll 0.9/1.2mm Hard Wire V groove feed roll 0.8/1.0mm Soft Wire U groove feed roll 0.9/1.2mm Soft Wire U groove feed roll 0.8/0.9mm Cored Wire V knurl feed roll Tweco Weldkill 220A MIG Torch, 3m Tweco Spool Gun, 4m 26V Tig Torch with 4m Lead 7.6m Foot Control Basic Utility Cart Single Cylinder Professional Cart Dual Cylinder Professional cart Consumables Storage Box Replacement Gas Hose

Machine Specifications Mains Input Voltage Welding Current Range Protection Factor Warranty Period

1ph. 230/110V 10 - 210A IP23S 2 Years

29.88 29.88 29.88 29.88 29.88 99.06 498.75 165.59 312.90 326.00 389.00 536.00 14.00 20.88

Wire Drive Type MIG MMA TIG

Welding Output

2 Roll 20% @ 210A 25% @ 200A 20% @ 200A

I efficiency 110V = 19.6A 230V = 15A

Features

Benefits

Dual Voltage Input Power Adjustable Burn Back Control Reverse Polarity Facility Power Factor Correction

Suitable for use on 110 or 230 VAC Gives precise wire burn back for diameter of wire and good re-striking capability Allows use of self shielding wires for outdoor applications ‘The greener option’ offers a higher output while reducing input power consumption!

Spool Gun Ready

1 9

For easy aluminium welding

2 3 4 5 6

Item 1 2 3 4 5 6 7

7 8 9

WELDING EQUIPMENT

DUAL V OLTAG 230 / 110v E

WELDING EQUIPMENT

INVERTER MIG (GMAW) MACHINE

FABRICATOR 252i

1ph 230V input, 300A Compact MIG & Multiprocess Inverter 15 kg Wire Spool Capacity

POWER FACTOR CORRECTION

Processes: MIG / FLUX CORED / STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1004408

40% @ 250A

5 - 300A

440 x 260 x 600 mm

29.6 kg

Part No.

Description

W1004408

Fabricator 252i Compact MIG Inverter with 0.9/1.2mm and 0.6/0.9mm V groove feed rolls, gas hose, earth cable and clamp with 50mm connections, mains cable, Tweco TWE2, 3m MIG Torch

List Price £ 2,232.00

OPTIONS AND ACCESSORIES

Feed rolls are supplied as singles. Please order both a top and bottom feed roll

407002-001 375832 407002-002 171115-003 170924-010 408023-002 161.550.307 W4013601 10-4016 SG200TA-25-3545 W4014700 W4015001 W4015002 872726 W7004930

29.88 29.88 29.88 29.88 29.88 29.88 122.09 150.20 312.90 598.50 326.00

(Top) Feed Roll, 0.6-1.2mm Hard Wire, 1.2mm Flux Cored Wire (Top) Feed Roll, 0.8/0.9mm Flux Cored Wire (Bottom) Feed Roll, 0.6-0.9mm Hard Wire, 0.8/0.9mm Flux Cored Wire (Bottom) Feed Roll, 1.2mm Hard Wire (Bottom) Feed Roll, 1.2mm Flux Cored Wire (Top or Bottom) Feed Roll, 1.2mm Soft Wire Tweco TWE2.3E 250A MIG Torch, 3m 26 Tig Torch with 4m Lead 7.6m Foot Control Tweco Spool Gun, 8m Basic Utility Cart Single Cylinder Professional Cart Dual Cylinder Professional cart Consumables Storage Box Replacement Gas Hose

Machine Specifications Mains Input Voltage Welding Current Range Protection Factor Warranty Period

1ph. 230V 5 - 300A IP23S 2 Years

389.00 536.00 14.00 20.88

I efficiency 16A Wire Drive Type Welding Output

MIG MMA TIG

2 Roll 40% @ 250A 40% @ 230A 40% @ 250A

Features

Benefits

Dual Voltage Input Power Adjustable Burn Back Control Reverse Polarity Facility Power Factor Correction

Spool Gun Ready

For easy aluminium welding

2 1 9

3 4 5 6

Item 1 2 3 4 5 6 7 8 9

Description Power Indicator Thermal Overload Indicator Digital Voltage Meter Push-Button Process Selection Push-Button Trigger Mode Control Advanced Feature Button. Primary Function Adjust Weld Process Digital Amperage Meter

WELDING EQUIPMENT

WORKSHOP CARTS 3 IN 1 SERIES SINGLE CYLINDER CART Cat. No. W4015001 Designed for Fabricator 211i and 252i, with 1 gas cylinder attached. Includes storage draw at the front of the cart, and 1 toolbox for consumables storage which slots into the side of the cart. Spare Consumables box Cat. No. 872726

3 IN 1 SERIES DUAL CYLINDER CART Cat. No. W4015002 Designed for Fabricator 211i and 252i, with 1 gas cylinder attached. Includes storage draw at the front of the cart, and 1 toolbox for consumables storage which slots into the side of the cart. Spare Consumables box Cat. No. 872726

3 IN 1 SERIES UTILITY CART Cat. No. W4014700 Suitable for Fabricator 181i, 211i and 252i, as well as most small welding or cutting inverters.

ROLL CAGE Cat. No. W4015104 Suitable for Fabricator 211i Cat. No. W4015101 Suitable for Fabricator 252i

FABRICATOR 250C III COMPACT

3ph 400V Input, 250A Compact MIG Machine with 10 Voltage settings

Processes: MIG / FLUX CORED Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

FAB250C

30% @ 250A

40 - 250A

800 x 380 x 870 mm

76 kg

Part No.

Description

FAB250C

Fabricator 250C III Conventional MIG System with, Wheel Kit/Cylinder Tray, gas hose, 0.8-1.0mm Feed Roll

List Price ÂŁ 1,470.00

OPTIONS AND ACCESSORIES 2187 2189 2511 2269 2316 2513 2319 2321 WS220XE-10-3035 WS220XE-12-3035

0.6/0.8mm Hard Wire V groove feed roll 1.0/1.2mm Hard Wire V groove feed roll 1.2/1.6mm Hard Wire V groove feed roll 1.0/1.2mm Soft Wire U groove feed roll 1.2/1.6mm Soft Wire U groove feed roll 1.6/2.0mm Cored Wire V knurl feed roll 1.0/1.2mm Cored Wire V knurl feed roll 1.2/1.6mm Cored Wire V knurl feed roll Tweco Weldskill 200A MIG Torch, 3m Tweco Weldskill 200A MIG Torch, 3.6m

Machine Specifications Mains Input Voltage 3ph. 400V Open Circuit voltage 19.4 - 45.4V Voltage Settings 10 Warranty Period 2 Years

Features

38.38 38.38 38.38 38.38 38.38 38.38 38.38 38.38 99.06 105.74

Wire Feed System Specifications Wire Feed Spped Range Wire Drive Type Hard Wire Soft Wire Wire Diameter Range Cored Wire

I efficiency 1 - 19 m/min 2 Roll 0.6 - 1.6 mm 1.0 - 1.6 mm 1.0 - 2.0 mm

10A

Benefits

Thermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blocked Allows operator to set dedicated on/off times to produce uniform short runs Stitch Timer Control Spot Timer Control Consistently timed, uniform spot welds

2 3 4

Item 1 2 3 4 5 6

Description Power LED Wire speed selection Interval time selection Spot time selection Thermal Overload indicator Voltage control

Please note: The wire feed unit is a two roll system, therefore any one of the above drive rolls is required to make a set

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

FABRICATOR 320C III COMPACT

3ph 400V Input, 340A Compact MIG Machine with 12 Voltage settings

Processes: MIG / FLUX CORED Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

FAB320C

20% @ 340A

40 - 340A

800 x 380 x 870 mm

99 kg

Part No.

Description

FAB320C

Fabricator 320C III Conventional MIG System with, Wheel Kit/Cylinder Tray, gas hose, 1.0-1.2mm Feed Rolls

List Price ÂŁ

OPTIONS AND ACCESSORIES 2187 2189 2511 2269 2316 2513 2319 2321 161.560.307 161.560.407 161.560.457

0.6/0.8mm Hard Wire V groove feed roll 1.0/1.2mm Hard Wire V groove feed roll 1.2/1.6mm Hard Wire V groove feed roll 1.0/1.2mm Soft Wire U groove feed roll 1.2/1.6mm Soft Wire U groove feed roll 1.6/2.0mm Cored Wire V knurl feed roll 1.0/1.2mm Cored Wire V knurl feed roll 1.2/1.6mm Cored Wire V knurl feed roll Tweco TWE4.3E 400A MIG Torch, 3m Tweco TWE4.4E 400A MIG Torch, 4m Tweco TWE4.45E 400A MIG Torch, 4.5m

Machine Specifications Mains Input Voltage 3ph. 400V Open Circuit Voltage 18.2 - 44.9V Voltage Settings 12 Warranty Period 2 Years

1,838.00

38.38 38.38 38.38 38.38 38.38 38.38 38.38 38.38 160.81 169.74 177.18

Wire Feed System Specifications Wire Feed Spped Range Wire Drive Type Hard Wire Soft Wire Wire Diameter Range Cored Wire

1 - 19 m/min 4 Roll 0.6 - 1.6 mm 1.0 - 1.6 mm 1.0 - 2.0 mm

I efficiency 10.8A

Features

Benefits

Thermal Overload Protection with Indicator Spot Timer Control Stitch Timer Control Adjustable Burn Back Control Trigger Latching Facility Electronic feedback of wire speed Voltage and amp meters at wfu Pre + post gas control Initial Speed Control

Alerts operator if duty cycle is exceeded or airflow is blocked Consistently timed, uniform spot welds Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Constant wire feed speed Allows operator to see parameters at working area Allows operator to change pre + post gas times to suit applications Allows operator to change initial wire speed time for soft start applications

320

7 6 5

Item 1 2 3 4 5 6 7

Description Thermal overload warning light Digital meters Control Knob Cold wire inch Gas purge Mode selector Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set

FABRICATOR 320S III SEPARATE WITH WIRE FEED UNIT

3ph 400V Input, 340A MIG Machine with separate wire feed unit and 12 Voltage settings

Processes: MIG / FLUX CORED Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

FAB320S

20% @ 340A

40 - 340A

1360 x 380 x 870 mm

120 kg

Part No.

Description

FAB320S

Fabricator 320S III Conventional MIG System with Separate Wire Feed Unit, 5m Interconnection Cable, gas hose, 1.0-1.2mm Feed Rolls, mains cable

List Price ÂŁ 2,363.00

OPTIONS AND ACCESSORIES VM0393E VM0394E 2187 2189 2511

5m Interconnecting cable assy a/c 242.38 10m Interconnecting cable assy a/c 427.35 0.6/0.8mm Hard Wire V Groove Feed Roll 38.38 1.0/1.2mm Hard Wire V Groove Feed Roll 38.38 1.2/1.6mm Hard Wire V Groove Feed Roll 38.38

2269 2316 2513 2319 2321

1.0/1.2mm 1.2/1.6mm 1.6/2.0mm 1.0/1.2mm 1.2/1.6mm

Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Cored Wire V Groove Feed Roll Cored Wire V Groove Feed Roll

38.38 38.38 38.38 38.38 38.38

Recommended Torches 161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A)

160.81 169.74 177.18

Wire Feed System Specifications Wire Feed Spped Range Wire Drive Type Hard Wire Soft Wire Wire Diameter Range Cored Wire

Machine Specifications Mains Input Voltage 3ph. 400V Open Circuit Voltage 18.2 - 44.9V Voltage Settings 12 Warranty Period 2 Years

1 - 19 m/min 4 Roll 0.6 - 1.6 mm 1.0 - 1.6 mm 1.0 - 2.0 mm

I efficiency 10.8V

Features

Benefits

320

7 6 5

Item 1 2 3 4 5 6 7

Description Thermal overload warning light Digital meters Control Knob Cold wire inch Gas purge Mode selector Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

FABRICATOR 400S III SEPARATE WITH WIRE FEED UNIT

3ph 400V Input, 420A Separate MIG Machine with 20 Voltage settings, Digital Meters, micro processor control

Processes: MIG / FLUX CORED Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

FAB400S

30% @ 420A

55 - 420A

1360 x 380 x 870 mm

133 kg

Part No.

Description

FAB400S

Fabricator 400S III 420A Separate MIG system with 1.6m interconnection, 1.0-1.2mm feed rolls, feeder wheel kit, mains cable

2,468.00

OPTIONS AND ACCESSORIES VM0263E VM0266E VM0267E 2187 2189 2511

1m Interconnecting cable assy a/c 177.95 5m Interconnecting cable assy a/c 253.56 10m Interconnecting cable assy a/c 484.33 0.6/0.8mm Hard Wire V Groove Feed Roll 38.38 1.0/1.2mm Hard Wire V Groove Feed Roll 38.38 1.2/1.6mm Hard Wire V Groove Feed Roll 38.38

2269 2316 2513 2319 2321

1.0/1.2mm 1.2/1.6mm 1.6/2.0mm 1.0/1.2mm 1.2/1.6mm

Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Cored Wire V Groove Feed Roll Cored Wire V Groove Feed Roll

38.38 38.38 38.38 38.38 38.38

Machine Specifications Mains Input Voltage Open Circuit Voltage Protection factor Warranty Period

3ph. 400V

160.81 169.74 177.18

Wire Feed System Specifications Wire Feed Spped Range Wire Drive Type

19.3 - 48V IP 21 2 Years

Hard Wire Soft Wire Cored Wire

Wire Diameter Range

I efficiency 1 - 19 m/min 4 Roll Geared 0.6 - 1.6 mm 1.0 - 1.6 mm 1.0 - 2.0 mm

13.7A

Features

Benefits

Alerts operator if duty cycle is exceeded or airflow is blocked Consistently timed, uniform tack welds Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Constant wire feed speed Allows operator to see parameters at working area Allows operator to change pre + post gas times to suit applications Allows operator to change initial wire speed time for soft start applications

400

7 6 5

Item 1 2 3 4 5 6 7

Description Thermal overload warning light Digital meters Control Knob Cold wire inch Gas purge Mode selector Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set

FABRICATOR 500S III SEPARATE WITH HIGH SPEED WIRE FEED UNIT 3ph 400V Input, 520A separate MIG Machine with 30 Voltage settings, Digital Meters, micro processor control

Processes: MIG / FLUX CORED Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

FAB500S

25% @ 520A

70 - 520A

1430 x 440 x 870 mm

161 kg

Part No.

Description

FAB500S

Fabricator 500S III 520A Separate system with 1.6m interconnection A/C, 1.0/1.2 mm feed rolls, feeder wheel kit, mains cable

OPTIONS AND ACCESSORIES A.028E VM0263E VM0266E VM0267E VM0264E VM0265E VM0268E 7-3580

Water Cooler w/flow sensor c/w fittings 1.6m Interconnecting cable assy a/c 5m Interconnecting cable assy a/c 10m Interconnecting cable assy a/c 1.6m Interconnecting cable assy w/c 5m Interconnecting cable assy w/c 10m Interconnecting cable assy w/c Torch Coolant, 3.8l

679.35

177.95 253.56 484.33 208.64 325.23 538.46 21.79

1657 2062 1729 1829 2313 2314 2298 2278

0.6/0.8mm 1.0/1.2mm 1.2/1.6mm 1.0/1.2mm 1.2/1.6mm 1.6/2.0mm 1.0/1.2mm 1.2/1.6mm

Hard Wire V Groove Feed Roll Hard Wire V Groove Feed Roll Hard Wire V Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Cored Wire V Groove Feed Roll Cored Wire V Groove Feed Roll

38.38 38.38

38.38 38.38 38.38 38.38 38.38 38.38

Recommended Torches 161.560.307 161.560.407 161.560.457 552.316.307 552.316.407

TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A)

Machine Specifications Mains Input Voltage Open Circuit Voltage Protection factor Warranty Period

3ph. 400V 20.2 - 59.8V IP 21 2 Years

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

160.81 169.74 177.18 335.00 375.00

I efficiency 1 - 25 m/min 4 Roll Geared 0.6 - 1.6mm 0.8 - 1.6mm 1.0 - 2.0mm

22.5A

Features

Benefits

500 8 7 6

Item Description 1 Water cooler warning light 2 Thermal overload warning light 3 3 Digital meters 4 Control Knob 5 Cold wire inch 6 Gas purge 5 7 Mode selector 8 Secondary parameter settings button 4 Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

WELDING EQUIPMENT

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 320SP

3ph 400v Input, 320A Digital Control Synergic MIG Compact System

PowerMaster Plus

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000103PP

60% @ 320A / 100% @ 280A

5 - 320A

498 x 340 x 745 mm

35 kg

Part No.

Description

W1000103PP

320A PowerMaster Mobile Power Source complete with 1.0mm/1.2mm V drive rollers, gas hose, mains cable

List Price ÂŁ 6,579.00

OPTIONS AND ACCESSORIES W4000000 W4011601 W4001301 W4000300

Remote Control RC 20 TIG Kit Water Recirculator Thermal Arc Inverter Cart

381.78 513.59 1279.85 662.00

161.628.307 161.628.407 161.560.307 161.560.407 161.560.457 ML3600PM

TWECO DSA MIG Digital Air Cooled Torch 400A 3m TWECO DSA MIG Digital Air Cooled Torch 400A 4m TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) Digital Push-pull torch 8m Air Cooled

322.77 356.16 160.81 169.74 177.18 2261.70

Recommended Torches

Feed Rolls 74238 74129 74109 74102 74107

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

3ph. 400V 15.2V - 30V IP 23 3 Years

37.99 37.99 37.99 37.99 37.99

74796 1.0/1.2mm Soft Wire U Groove 74797 1.2/1.6mm Soft Wire U Groove 7977734 0.8/0.9mm Cored Wire V Knurl 74291 1.2/1.6mm Cored Wire V Knurl 7977372 1.6/2.4mm Cored Wire V Knurl

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

I efficiency 0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

14A

Features

Benefits

PowerMaster Plus 100 Programmes accessible from MIG torch

Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut Ensuring fast and flexible control

Synergic One Knob Control

Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

TIG quality welds at MIG speeds ideally suited to thin gauge material Enabling machine to withstand rigor of every day use User friendly with all parameters - programmes easily viewed Giving precise arc characteristics at low running costs

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

POWERMASTER PLUS 400SP Air Cooled System

PowerMaster Plus

3ph 400v Input, 400A Digital Control Synergic MIG Separate System

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000303PP

60% @ 400A / 100% @ 350A

5 - 400A

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No. W1000303PP W3000103 W4000400

Description 400A PowerMaster Power Source Air Cooled 4 Roll Workshop Wire Feeder Air Cooled complete with 1.0/1.2mm V drive rollers 1m 70mm Air-Cooled Interconnection

List Price ÂŁ 6,516.00 2,085.00 250.00

OPTIONS AND ACCESSORIES W4000100 W4011600 W4001000 W4000503 W4000401 W4000606

Remote Control HR 911 TIG Kit Swivel Unit 5m 70mm Air-Cooled Interconnection 10m 70mm Air-Cooled Interconnection 20m 95mm Air- and Water-Cooled Interconnection

741.81 356.20 214.42 456.75 539.70 1195.00

161.628.307 161.628.407 ML3600PM 161.560.307 161.560.407 161.560.457

TWECO DSA MIG Digital Air Cooled Torch 400A 3m TWECO DSA MIG Digital Air Cooled Torch 400A 4m Digital Push-pull torch 8m Air Cooled TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A)

322.77 356.16 2261.70 160.81 169.74 177.18

74238 74129 74109 74102 74107

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

Recommended Torches

Feed Rolls

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

3ph. 400V 15.2V - 34V IP 23 3 Years

37.99 37.99 37.99 37.99 37.99

74796 1.0/1.2mm Soft Wire U Groove 74797 1.2/1.6mm Soft Wire U Groove 7977734 0.8/0.9mm Cored Wire V Knurl 74291 1.2/1.6mm Cored Wire V Knurl 7977372 1.6/2.4mm Cored Wire V Knurl

I efficiency

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

20A

Features

Benefits

PowerMaster Plus 100 Programmes accessible from MIG torch

Synergic One Knob Control

Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

WELDING EQUIPMENT

SYNERGIC MIG PULSE INVERTER

WELDING EQUIPMENT

SYNERGIC MIG PULSE INVERTER

PowerMaster Plus

POWERMASTER PLUS 400SP Water Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000203PP

60% @ 400A / 100% @ 350A

5 - 400A

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No. W1000203PP W3000203 W4000500

Description 400A PowerMaster Power Source with Integrated Water Cooler 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1m 70mm Water-Cooled Interconnection

List Price ÂŁ 7,571.00 2,013.00 275.00

OPTIONS AND ACCESSORIES W4000100 W4011600 W4001000 W4000503 W4000501 W4000606 7-3580

Remote Control HR 911 TIG Kit Swivel Unit 5m 70mm Water-Cooled Interconnection 10m 70mm Water-Cooled Interconnection 20m 95mm Water-Cooled Interconnection Torch Coolant, 3.8l

741.81 356.20 214.42 456.75 567.00 1195.00 21.79

160.620.307 160.620.407 MW5400PM W4001500 552.316.307 552.316.407

TWECO DSW MIG Digital Water Cooled Torch 500A 3m TWECO DSW MIG Digital Water Cooled Torch 500A 4m Digital Push-pull torch 8m Water Cooled Push-Pull Control Board SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A)

503.08 550.94 3,097.50 253.41 335.00 375.00

Recommended Torches

Feed Rolls 74238 74129 74109 74102 74107

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

37.99 37.99 37.99 37.99 37.99

74796 1.0/1.2mm Soft Wire U Groove 74797 1.2/1.6mm Soft Wire U Groove 7977734 0.8/0.9mm Cored Wire V Knurl 74291 1.2/1.6mm Cored Wire V Knurl 7977372 1.6/2.4mm Cored Wire V Knurl

Wire Feed System Specifications

3ph. 400V Wire Feed Speed Range 15.2V - 34V Wire Drive Type IP 23 3 Years Wire Diameter Range

Hard Wire Soft Wire Cored Wire

I efficiency 0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

20A

Features

Benefits

PowerMaster Plus 100 Programmes accessible from MIG torch

Synergic One Knob Control

Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

POWERMASTER PLUS 500SP Water Cooled System

PowerMaster Plus

3ph 400v Input, 500A Digital Control Synergic MIG Separate System

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000503PP

100% @ 500A

5 - 500A

855 x 445 x 1116 mm

121 kg

BASIC PACKAGE COMPONENTS Part No. W1000503PP W3000203 W4000600

Description 500A PowerMaster Power Source with Integrated Water Cooler 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1m 95mm Water-Cooled Interconnection

List Price ÂŁ 8,474.00 2,013.00 291.00

OPTIONS AND ACCESSORIES W4000100 W4011600 W4001000 W4000607 W4000601 W4000606 7-3580

Remote Control HR 911 TIG Kit Swivel Unit 5m 95mm Water-Cooled Interconnection 10m 95mm Water-Cooled Interconnection 20m 95mm Water-Cooled Interconnection Torch Coolant, 3.8l

741.81 356.20 214.42 445.00 630.00 1195.00 21.79

Recommended Torches

160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m MW5400PM Digital Push-pull torch 8m Water Cooled

Feed Rolls 74238 74129 74109 74102 74107

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

3ph. 400V 15.2V - 39V IP 23 3 Years

37.99 37.99 37.99 37.99 37.99

503.08 550.94 3,097.50 74796 1.0/1.2mm Soft Wire U Groove 74797 1.2/1.6mm Soft Wire U Groove 7977734 0.8/0.9mm Cored Wire V Knurl 74291 1.2/1.6mm Cored Wire V Knurl 7977372 1.6/2.4mm Cored Wire V Knurl

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

I efficiency 0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

29A

Features

Benefits

PowerMaster Plus 100 Programmes accessible from MIG torch

Synergic One Knob Control

Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

WELDING EQUIPMENT

SYNERGIC MIG PULSE INVERTER

WELDING EQUIPMENT

PowerMaster Plus

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 400SP ROBOTIC PACKAGE Water Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000403PP

50% @ 400A / 100% @ 320A

5 - 400A

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No. W1000403PP W3000303 W4000502

Description 400A PowerMaster Power Source with Integrated Water Cooler, Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable 4 Roll SP4000R Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 10m 70mm Water-Cooled Robotic Interconnection

List Price ÂŁ 10,752.00 1,633.00 566.00

OPTIONS AND ACCESSORIES W4000100 W4000800 W4000700 7-3580 Feed Rolls 74238 74129 74109 74102 74107

Remote Control HR 911 42 pin plug for robot interface cable 10m robot control cable (includes W4000800) Torch Coolant, 3.8l 0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

3ph. 400V 15.2V - 34V IP 23 3 Years

37.99 37.99 37.99 37.99 37.99

741.81 266.46 688.26 21.79 74796 1.0/1.2mm Soft Wire U Groove 74797 1.2/1.6mm Soft Wire U Groove 7977734 0.8/0.9mm Cored Wire V Knurl 74291 1.2/1.6mm Cored Wire V Knurl 7977372 1.6/2.4mm Cored Wire V Knurl

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

I efficiency 0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

20A

Features

Benefits

PowerMaster Plus Synergic One Knob Control

Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

POWERMASTER PLUS 500SP ROBOTIC PACKAGE Water Cooled System

3ph 400v Input, 500A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable

Processes: MIG / FLUX CORED / STICK Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

W1000603PP

60% @ 500A / 100% @ 400A

5 - 500A

855 x 445 x 1116 mm

121 kg

BASIC PACKAGE COMPONENTS Part No. W1000603PP W3000303 W4000602

Description 500A PowerMaster Power Source with Integrated Water Cooler, Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable 4 Roll SP4000R Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 10m 90mm Water-Cooled Robotic Interconnection

List Price ÂŁ 11,304.00 1,633.00 621.00

OPTIONS AND ACCESSORIES W4000100 W4000800 W4000700 7-3580 Feed Rolls 74238 74129 74109 74102 74107

Machine Specifications Mains Input Voltage Arc Voltage Range Protection factor Warranty Period

3ph. 400V 15.2V - 34V IP 23 3 Years

37.99 37.99 37.99 37.99 37.99

I efficiency

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Hard Wire Soft Wire Cored Wire

0.1 - 25 m/min 4 Roll 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 2.4mm

29A

Features

Benefits

PowerMaster Plus Synergic One Knob Control

Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design

Spatter free in majority of welding applications

Less clean up time, aesthetically pleasing weld appearance

37.99 37.99 37.99 37.99 37.99

WELDING EQUIPMENT

PowerMaster Plus

SYNERGIC MIG PULSE INVERTER

WELDING EQUIPMENT

DIGITAL TORCHES - DSA.40

AIR COOLED Part No. 161.628.307 161.628.407

Description TWECO DSA MIG Digital Air Cooled Torch 400A 3m TWECO DSA MIG Digital Air Cooled Torch 400A 4m

ML3600PM Push Pull Torch 8m Air Cooled This torch includes all boards and sockets required to fit to the Powermaster machines

List Price ÂŁ 322.77 356.16 2,261.70

Standard Consumables Conductor Tube 116103510 Conductor Tube with Insulator

18.43

Nozzles 23-50 23-62 23-75

Insulated Fixed Nozzle 12.7mm Insulated Fixed Nozzle 15.9mm (fitted as standard) Insulated Fixed Nozzle 19.1mm

10.95 10.95 10.95

Contact Tips 14H-35 14H-40 14H-45 14H-52 14H-116

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard) Contact Tip 1.6mm

1.01 1.01 1.01 1.01 1.01

Diffusers 54A

Gas Diffuser

3.30

Liners 134090402 4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) S129.5.44.115 Liner Guide, 115mm

12.97 7.74

DIGITAL TORCHES - DSW.300 / DSW 450

WATER COOLED Part No. 160.610.307 160.610.407 160.620.307 160.620.407

Description TWECO DSW MIG Digital Water Cooled Torch 300A 3m TWECO DSW MIG Digital Water Cooled Torch 300A 4m TWECO DSW MIG Digital Water Cooled Torch 500A 3m TWECO DSW MIG Digital Water Cooled Torch 500A 4m

MW5400PM Push Pull Torch 8m Water Cooled This torch includes all boards and sockets required to fit to the Powermaster machines

List Price ÂŁ 426.28 464.12 503.08 550.94 3,097.50

Standard Consumables Conductor Tube SW63-50 Conductor Tube Assembly (300A) 116116104 Conductor Tube Assembly (500A) Nozzles 300A SW23-15 SW23-12 SW23-18 500A SW24-17 SW24-15 SW24-21 Contact Tips 300A 14H-35 14H-40 14H-45 14H-52 500A 16S-35 16S-40 16S-45 16S-52 16S-116 16S-564

98.51 90.60

15mm Nozzle (fitted as standard) 12mm Nozzle 18mm Nozzle

8.80 11.73 8.80

Nozzle (500A) (fitted as standard) 15mm Nozzle 21mm Nozzle

11.55 11.55 9.10

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard)

1.01 1.01 1.01 1.01

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard) Contact Tip 1.6mm Contact Tip 2.0mm

1.38 1.38 1.38 1.38 1.38 1.38

Diffusers SW53-14 SW54-16S

Diffuser (300A) Diffuser (500A)

6.25 5.50

Liners 134090402

4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard)

S129.5.44.115 Liner Guide, 115mm

12.97 7.74

WELDING EQUIPMENT

TIG (GTAW) INVERTER

ARCMASTER 400 MST

3ph 380/415V Input, 400A Multi Process Inverter with MIG, Lift TIG and Stick facility

Processes: MIG / FLUX CORED / STICK / LIFT TIG Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (HxWxD)

Weight

10-3089

25% @ 400A

5 - 400A

420 x 210 x 450 mm

25 kg

Part No.

Description

10-3089

TA 400 MST 400 Amp DC CC/CV Multi Process Inverter

List Price ÂŁ 3,518.00

OPTIONS AND ACCESSORIES 10-2007 10-2005 10-2096 10-2097 CART.2 WC.ARCM3.1 TIG/HF400A

396.93 660.14 48.08 8.05 289.00 1,134.00 1,888.95

Remote Foot control 7.6m lead and plug Remote Hand Pendant 7.6m lead and plug 14 Pin Plug for Remote or TIG Torch Button Cable Clamp for 14 Pin Plug ArcMaster 3.1 Workshop Cart ArcMaster Cooler 400A TIG HF Box

I efficiency

Machine Specifications Mains Input Voltage Protection Factor

3ph. 380/415v IP23S

Open Circuit Voltage Warranty Period

65V 3 Years

18A

Features

Benefits

Smart LogicÂŽ Thermal Overload Protection with Indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Programmable Lift Start TIG Hot Start

Item Description

1 2 3

4 5 6

7 8

VRD- (Voltage Reduction Device) lights indicate on or off STICK/MIG Parameters - Pressing this button scrolls through the STICK functions or MIG functions Digital LED display - welding amperage and voltage or parameter values are displayed in these windows. Internal warnings are signalled to the operator Save/Load Buttons - By using the Save & Load buttons the operator can easily save up to 5 welding programmes Control knob - allows the operator voltage within the entire range of the power source, also used to set each parameter value Process functions - pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG) Remote current function - pressing this button enables remote current Remote contactor function - pressing this button enables remote contactor one or off

ARCMASTER 3.1 SERIES CART Cat. No. CART.2 Designed for Arcmaster 400TS, 400MST and 300 AC/DC Fits Power Source only or Power Source and Cooler

POWERMASTER 320SP TROLLEY Cat. No. W4000300 Designed for Powermaster 320SP Fits Power Source only or Power Source and Cooler

WELDING EQUIPMENT

WORKSHOP CARTS

ARC ACCESSORIES

AIR-COOLED MIG GUNS

TWECO TWE AIR-COOLED MIG TORCHES Part No. 161.550.307 161.550.407

Description TWE2.3E, Tweco 250A MIG Gun, 3m (10ft) TWE2.4E, Tweco 250A MIG Gun, 4m (12ft)

161.560.307 161.560.407 161.560.457

TWE4.3E, Tweco 400A MIG Gun, 3m (10ft) TWE4.4E, Tweco 400A MIG Gun, 4m (12ft) TWE4.45E, Tweco 400A MIG Gun, 4.5m (15ft)

List Price £ 122.09 133.99 160.81 169.74 177.18

CLASSIC TWECO AIR-COOLED MIG TORCHES Part No. X210-4045 X212-4045 X215-4045

Description Classic Tweco No. 2, 200A MIG Gun, 3m (10ft) Classic Tweco No. 2, 200A MIG Gun, 4m (12ft) Classic Tweco No. 2, 200A MIG Gun, 4.5m (15ft)

List Price £ 184.62 195.04 205.49

X410-3545 X412-3545 X415-3545

Classic Tweco No. 4, 400A MIG Gun, 3m (10ft) Classic Tweco No. 4, 400A MIG Gun, 4m (12ft) Classic Tweco No. 4, 400A MIG Gun, 4.5m (15ft)

229.29 244.17 259.07

TWECO WELDSKILL CONSUMABLES - WS180 AND WS220 GUNS Part No. WS21-50F WS21-37 WS21-62 WS11-23 WS11-30 11-40 WS11-45 WS51 WS42-3035-15

Description Nozzle, 13mm Bore Nozzle, 9.5mm Bore Nozzle, 16mm Bore Contact Tip, 0.6mm Contact Tip, 0.8mm Contact Tip, 1.0mm Contact Tip, 1.2mm Gas Diffuser Conduit Liner, 0.8 - 0.9mm

List Price £ 9.19 9.19 9.19 0.64 0.64 0.65 0.64 3.49 15.21

TWECO TWE & CLASSIC CONSUMABLES Part No.

Description

List Price £

NOZZLES - TWE2 AND CLASSIC NO.2 GUNS 22-50 22-62

1/2” / 13mm Bore 5/8” / 16mm Bore

3.17 3.17

NOZZLES - TWE4 AND CLASSIC NO.4 GUNS 24A-50 24A-62 23-50 23-62

1/2” / 13mm Bore (adjustable) 5/8” / 16mm Bore (adjustable) 1/2” / 13mm Bore (self insulated, screw-on) 5/8” / 16mm Bore (self insulated, screw-on)

3.28 3.28 10.95 10.95

CONTACT TIPS 14-30 14-40 14-45 14-52 14-116

0.8mm - Standard 1.0mm - Standard 1.2mm - Standard 1.3mm - Standard 1.6mm - Standard

0.71 0.71 0.71 0.71 0.71

Gas Diffuser (TWE2 & Classic No. 2 Guns) Gas Diffuser (TWE4 & Classic No. 4 Guns) Gas Diffuser (Fixed Type Nozzles)

5.13 3.30 5.82

GAS DIFFUSERS 52 54A 52FN

CONDUIT LINERS - TWE2 AND CLASSIC NO.2 GUNS 42-3035-15 42-4045-15

15ft Steel Liner, 0.8mm wire 15ft Steel Liner, 1.0 / 1.2mm wire

15.36 15.36

CONDUIT LINERS - TWE4 AND CLASSIC NO.4 GUNS 44-3545-15 44-116-15

15ft Steel Liner, 1.0 / 1.2mm wire 15ft Steel Liner, 1.2 / 1.6mm wire

15.76 15.76

ARC ACCESSORIES

AIR-COOLED CONSUMABLES

G E N E R A L I N F O R M AT I O N

Generator Information All Victor TechnologiesTM inverters are generator-friendly One of the main fears when selling any inverter is its reliability when used with a generator. Some inverters are very susceptible to input voltage fluctuations. Thermal Arc and Victor速 Thermal Dynamics速 inverter-based systems have in built protection to guard against any such fluctuations and minimise damage due to under or over voltage conditions. What Size of Generator do I Need? The KVA rating of the machine is the main factor to consider. However, it is important to remember that the input voltage can be affected by load changes during arc striking particularly when using rods which require a high open circuit voltage in order to initiate the arc. With the above in mind, listed on the next page are the input current ratings and equivalent KVA rating for Victor TechnologiesTM machines and the recommended generator size for running these systems up to their maximum duty cycle. If you wish to run these machines on extension leads you must ensure that you use the correct rated cables and mains plugs. As a guiding principle the kVA rating of a generator should be 1/3 higher than the rated load it is to supply. Please see next page for more detailed information for specific machines.

Part No.

Power Source

Input Voltage

W1003605 161S 110V/230V W1002903 175SE 230V W1003003 175TE 230V W1003803 201TS 110V/230V 10-3091 400TS 400V 10-3099 200AC/DC 230V W1006306 202AC/DC 230V 10-3098 300AC/DC 400V FAB250C FAB250C 400V FAB320C / FAB320S FAB320C / FAB320S 400V FAB400S FAB400S 400V FAB500S FAB500S 400V W1003186 Fabricator 181i 230V W1004207 Fabricator 211i 110V/230V W1004408 Fabricator 252i 230V* 10-3089 400MST 400V W1000103PP Powermaster 320SP 400V W1000303PP / Powermaster 400SP 400V W1000203PP W1000503PP Powermaster 500SP 400V 1-3835-4 Drag-Gun Plus 230V 1-4200-4 Cutmaster 12+ 110V/230V 1-5130-4 Cutmaster 12 400V 1-1130-4 Cutmaster 20 400V 1-1330-4 Cutmaster 25 400V 1-1730-4 Cutmaster 35 400V 1-1930-4 Cutmaster 40 400V * The Fab 252i has a dual output which depends on mains / mains cable size

Input Current ( I efficiency )

Max rated kVA input

17.8/14.7A 17A 17.9A 20A / 16A 14A 22A 15.5A 12A 10A 10.8A 13.7A 22.5A 16.6A 19.6A / 15A 16A / 23.4A 18A 14A

4/5.5 kVA 10 kVA 10 kVA 5kVA /8 kVA 21.5 kVA 8.7 kVA 8 kVA 14.4 kVA 11.6 kVA 14.8 kVA 16.7 kVA 28.5 kVA 5 kVA 4.5kVA / 8.5kVA 6.5kVA / 8.5kVA 21.5 kVA 20 kVA

20A

25 kVA

29A 18A 16.3A/13.5A 8A 11A 12A 24A 31A

30 kVA 8.3 kVA 5.6/8.5 kVA 5.3 kVA 11 kVA 11.8 kVA 18.7 kVA 23.6 kVA

Slow blow fuses or Motor rated circuit breakers are recommended for the above machines. Recommended Generators KVA ratings MUST be adhered to minimise the welding power sourceâ&#x20AC;&#x2122;s possible failure as a result of inadequate mains power at the equipments MAXIMUM input current draw at and MAXIMUM rated output at MAXIMUM duty cycle. Warranty will be void if the welding power source fails as a result of being operated on inadequate mains power. Calculating kVA (Kilovolt-Amperes) ratings. 1.

Single Phase Kilovolt-Amperes (kVA) = Volts x Amperes 1000

Three Phase

Kilovolt-Amperes (kVA) = Volts x Amperes X 1.73 1000

G E N E R A L I N F O R M AT I O N

RECOMMENDED GENERATOR SIZES

G E N E R A L I N F O R M AT I O N

Warranty Victor TechnologiesTM guarantees the proposed product to be free from defects in material or workmanship when operated in accordance with the written instructions as defined in the ownerâ&#x20AC;&#x2122;s manual supplied with the machine. Victor TechnologiesTM welding products are manufactured for use by commercial and industrial users and trained personnel with experience in the use and maintenance of electrical welding and cutting equipment. Victor TechnologiesTM warranty will not apply to: 1. 2. 3. 4.

Equipment that has been modified by any other party other than Victor TechnologiesTM own service personnel or with prior written consent obtained from Victor TechnologiesTM Technical department (UK). Equipment that has been used beyond the specifications established in the owners manual. Installation not in accordance with the installation/service manual. Failure to clean and maintain the machine as set forth in the owner, installation or service manual.

If warranty is being sought, please contact Victor TechnologiesTM Technical department for a warranty authorisation returns form. WELDING EQUIPMENT - Limited Warranty Period Product

Period

400TS, 400 MST, 200AC/DC, 300AC/DC, PowerMaster Plus 320SP, 400SP, 500SP,

3 Years

202AC/DC, Fabricator 181i, 211i, 252i, Fabricator 250C, 320C, 320S, 2 Years 400S, 500S, 175SE, 175TE, 161S, 201TS Options and Accessories

6 Months

Repair and Replacement Parts

3 Months

Torch Consumables

None

CUTTING EQUIPMENT - Limited Warranty Period Product

Period

Cutmaster Series

3 Years

Drag-Gun Plus, PAK-200

2 Years

1TorchTM, SureLokTM Torches and PCH-200

1 Year

Other Torches

6 Months

Repair Parts

3 Months

Torch Consumables

None