LICENCE OF CERTIFICATION
Date:
No./Version:
2013-07-01
4019-23
First version granted:
2004-11-29 Licensee’s name and address
Marks covered by licence:
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Information regarding licensee/manufacturer Licensee’s technical officer
Jaana Hallikas
Telephone
Email Manufacturer
Telefax
+ 358 20 129 211
+ 358 20 129 210
jaana.hallikas@uponor.com
Place of manufacture
Fristad, Sverige
Product covered by the licence Type of product
Plastic pipes
Standard/Other normative document
EN 12201-1
Specific rules
SBC 12201
Specification of product
PE tryckrör för att leda vatten och avloppsvatten enligt Bilaga 1. Godkända råmaterial enligt Bilaga 2 (konfidentiell). Besiktning av tillverkningstället: SP F319916
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTACERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY
Anne Qvintus, Managing Director
Annex 1
Page 1 (1)
Licence of certification No.
4019-23
Date
2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA PE-tryckrör för att leda vatten och avloppsvatten Test rapporter och andra referensdokument:
RÖR: Produkt namn Färg
Uponor tryckrörssystem PE
PE beteckning
PE 80 svart med blåa eller bruna sträckor
Standard dimension Dimensioner, mm - storleksgrupper 1 - 3
SDR 11 16 - 630
Standard dimension Dimensioner, mm - storleksgrupper 1 - 4
SDR 17 16 - 710
PE beteckning
PE 100 svart med blåa eller bruna sträckor
Standard dimension Dimensioner, mm - storleksgrupper 1 - 3
SDR 11 16 - 630
Standard dimension Dimensioner, mm - storleksgrupper 1 - 3
SDR 17 16 - 630
Produkt namn Färg
PROFUSE PE 100 blå-svart eller rödbrun-svart
SP F300838 SP F311847 SP F303325
Fog
stumfog och elsvetningsfog
PE beteckning
PE 100
SP F319916 VTT/RTE551/02 SWP F308475C SP P008448A
Standard dimension Dimensioner, mm - Storleksgrupper 1 - 3
SDR 11 16 - 630
Standard dimension Dimensioner, mm - storleksgrupper 1 - 3
SDR 17 16 - 630
Standard dimension Dimensioner, mm - storleksgrupper 1 - 3
SDR 26 16 - 630
Tillverkarens beteckning på produkter
5
SP P003425 DnV 153.326.1-02C SP F600868, SP F612207, SP F623411 SP F901611 VTT-S-00653-11
SP/KP60 -typgodkännelse (15.8.2005) SP F626693, SP 97H23702 VTT-S-10871-07
SP/KP60 -typgodkännelse (12.11.1997), SP F721639 SP F901613, SP F901612
SP FX004278C