LICENCE OF CERTIFICATION
Date:
No./Version:
2013-08-19
4069-06
First version granted:
2009-12-15 Licensee’s name and address
Marks covered by licence:
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Information regarding licensee/manufacturer Licensee’s technical officer
Jaana Hallikas
Telephone
Email Manufacturer
Telefax
+ 358 20 129 211
+ 358 20 129 210
jaana.hallikas@uponor.com
Place of manufacture
Nastola, Finland
Product covered by the licence Type of product
Plastic pipes
Standard/Other normative document
EN 13598-2
Specific rules
SBC 13598-2
Specification of product
Uponor brunnssystem enligt bilaga 1. Godkända tätningsringar och råmaterial enligt bilaga 2 (konfidentiell).
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTACERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY
Anne Qvintus, Managing Director
Annex 1
Sivu 1 (1)
Licence of certification No.
4069-06
Date
2013-08-19
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Produktnamn
Uponor tillsynsbrunn PP
Råmaterial
PP
Test rapporter och andra referensdokument: KP55, certifikat 17 7906 Va 2.61/17187 FI-3564
Botten, Modell 1 Botten, OD muff för stigarrör, ID muff för stigarrör, OD
400 315 och 425 mm 400 mm
Fogar/Typer
110 mm/T1- T4 160 mm/T2 160 mm också som Flex Joint
Installationsdjup Grundvattennivå
max. 6 m max. 5 m
SP F617175 C ja D SP F903488
Botten, Modell 2 Botten, OD muff för stigarrör, ID muff för stigarrör, OD
400 mm 315 och 425 mm 400 mm
Fogar/Typer
160 och 200 mm/T1 - T4
Installationsdjup Grundvattennivå
max 6 m max 6 m
Botten, Modell 3 Botten, OD muff för stigarrör, ID - typ 1 - typ 2
550 mm 600 mm
Fogar/Typer
200, 250 och 315 mm/T1 - T4
Installationsdjup Grundvattennivå
max. 6 m max. 5 m
Tillverkarens beteckning på produkter
1
SP F908835 SP FX 107186 A SP FX 107186 B SP FX 107186 C SP F922946