Uponor Heizkörperanschlussblock MLC
M O N TA G E A N L E I T U N G
Uponor Heizkörperanschlussblock MLC, 16 x 2 in einer Dämmbox mit abnehmbarer Schutzkappe (WLG 040). Dämmbox schwerentflammbar, B1 nach DIN 4102. Einbautiefe 50 mm, passend für alle gängigen Ventilheizkörper. Rohrmittenabstand vertikal 215 mm. Abstand Unterkante Heizkörperanschlussblock bis Mitte Heizkörperanschluss 240 mm. Maße der Dämmbox (H x B x T): 260 x 105 x 50 mm 1
Uponor Heizkörperanschlussbox MLC in der Rohbauphase in die erstellte Maueraussparung einsetzen und mit Montageschaum fixieren. (Dämmungsaufbauhöhe im Fußboden beachten). Aufbringen des Wandputzes. 4
Einbringen der Dämmung für Rohr und Estrich gemäß den anerkannten Regeln der Technik. (Das vorgebogene Uponor Unipipe MLC Rohr hat einen Rohrmittenabstand von 50 mm.)
2
Schutzkappe der Uponor Heizkörperanschlussbox MLC abziehen und mit z. B. einer Kupplung 16 x 14, 16 x 16, 16 x 18 oder 16 x 20 mm verpressen. Einbringen des Randdämmstreifens.
5
Durchführen der Estrich-, Malerund Fliesenarbeiten.
3
Heizungsvorlauf und -rücklauf anschließen und die Druckprüfung vornehmen. Das vorgebogene Uponor Unipipe MLC Rohr dient als Kurzschlussstrecke.
6
Heizkörper montieren und das nach Uponor Montageanleitung abgelängte und entgratete Uponor Unipipe MLC Rohr an das Heizkörperventil anschließen.
Uponor MLC radiator connection unit
MOUNTING INSTRUCTONS
Packaging unit: Insulation box made of polystyrene with removable protective cap and radiator connection bend made of UNIPIPE 16 x 2 mm. Installation depth 50 mm.
1
Insert the radiator connection unit, during construction, into the recess and secure in place with fixing foam. (Note the height of the floor insulation). Apply wall plaster.
E 958 - 10/2006 - Änderungen vorbehalten • Subject to modifications
4
Fit the insulation for pipe and screed according to the state-ofthe-art technology. (The ready-bent section of Uponor Unipipe MLC pipe has a pipe-centre clearance of 50 mm.)
2
Remove protective cap from the Uponor MLC radiator connection unit and press with e.g. a coupling of 16 x 14, 16 x 16, 16 x 18 or 16 x 20 mm. Fit the edging strip. 5
3
Connect the heating-system to the supply and return and carry out the pressure test. The ready-bent piece of Uponor Unipipe MLC pipe serves as short-circuit section. 6
Carry out screed-laying, painting and tiling.
Install the radiators and connect to the Uponor Unipipe MLC pipe that has been cut to length and bevelled according to Uponor installation instructions.
Uponor GmbH Industriestrasse 56 97437 Hassfurt Germany
T F W E
+49 (0)9521 690-0 +49 (0)9521 690-710 www.uponor.de info.de@uponor.com