Uponor dop tacker 1094378 int 1119600 20201014

Page 1

Declaration of Performance

EN

Acc. to construction product regulation (EU) 305/2011 Uponor_DoP_TACKER_1094378_INT_1119600_202010

1

Unique identification code of the product-type

2

Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4) :

3

Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer :

Thermal insulation of buildings

4

Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11(5) :

Uponor GmbH Franklinstr. 61-63 60486 Frankfurt

5

Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2) :

N.A.

6

System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V :

System 3

7

In case of the declaration of performance concerning a construction product covered by a harmonized standard

1094378_Uponor Tacker EPS DEO 70 30mm 10x1m N.A.

Institute INCD URBAN-INCERC (NB 1841) performed initial tests under system 3 . 8 9

In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued covered by a harmonized standard Declared performance Essential characteristics Performance Reaction to fire class Thermal conductivity Thermal resistance Compressive stress at 10% deformation Bending strenght Length Width Squareness Flatness Thickness

10

N.A.

Class E 0,039 W/mK 0,77 m²K/W CS(10)70 ≥70 kPa

Harmonized technical specification EN 13501-1:2010 EN 12667 EN 13163:2017-02 EN 826

BS115 ≥115 kPa L(2) ±2mm W(1) ±1mm Sb(1) ±1mm P(3) ±3mm T(1) +1mm

EN 12089 EN 822 EN 822 EN 824 EN 825 EN 823

The performance of the product identified in point 1 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by

v

v -----------------------------i.V. Thomas Raadts VP Product Marketing Frankfurt, 14.10.2020

---------------------------i.V. Jürgen Hanneken Manager Quality Ochtrup, 14.10.2020

EPS-EN 13163-T1-L2-W1-Sb1-P3-BS115-CS(10)70

1


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.