Utica by uri paz

Torque Products Power Tools Sales & Service Centers

Please note that all locations may not service all products. Please contact the nearest Apex Tool Group Sales & Service Center for the appropriate facility to handle your service requirements. D allas ,

L o s A n g e l e s , C al i f o r n i a

C h i n a

G e r ma n y

Apex Tool Group Sales & Service Center 1470 Post & Paddock Grand Prairie, TX 75050 Tel: (972) 641 9563 Fax: (972) 641 9674

T e x as

Apex Tool Group Sales & Service Center 15503 Blackburn Avenue Norwalk, CA 90650 Tel: (562) 623 4457 Fax: (562) 802 1718

Cooper (China) Co., Ltd. An Apex Tool Group, LLC company 955 Sheng Li Road, Heqing Pudong, Shanghai China 201201 Tel: +86 21 28994176 Fax: +86 21 51118446

D e t r o i t,

Yo r k ,

Cooper Power Tools GmbH & Co. OHG An Apex Tool Group, LLC company Industriestraße 1 73463 Westhausen Germany Tel: +49 (0) 73 63 81 0 Fax: +49 (0) 73 63 81 222

M i c h i ga n

Apex Tool Group Sales & Service Center 2630 Superior Court Auburn Hills, MI 48326 Tel: (248) 391 3700 Fax: (248) 391 7824 H o u st o n ,

T e x as

Apex Tool Group Sales & Service Center 6550 West Sam Houston Parkway North, Suite 200 Houston, TX 77041 Tel: (713) 849 2364 Fax: (713) 849 2047 S e attl e ,

P e n n syl v a n i a

Apex Tool Group Sales & Service Center York Service Center 3990 E. Market Street York, PA 17402 Tel: (717) 755 2933 Fax: (717) 757 5063

W as h i n gt o n

Apex Tool Group Sales & Service Center 2865 152nd Ave N.E. Redmond, WA 98052 Tel: (425) 497 0476 Fax: (425) 497 0496 L e x i n gt o n ,

S C

Apex Tool Group 670 Industrial Drive Lexington, SC 29072 Tel: (800) 845 5629 Tel: (803) 951 7544 Fax: (803) 358 7681

Apex Tool Group, LLC 1000 Lufkin Road Apex, NC 27539 Phone: 919-387-0099 Fax: 919-387-2614 www.clecotools.com SP-301-EN 0611 7.5M Specifications subject to change without notice. COPYRIGHT © 2011 APEX TOOL GROUP, LLC.

B r a z i l

Cooper Tools Industrial Ltda. An Apex Tool Group, LLC company Av. Liberdade, 4055 Zona Industrial - Iporanga 18087-170 Sorocaba SP Brazil Tel: +55 15 2383929 Fax: +55 15 2383260 C a n ada

Apex Tool Group Sales & Service Center 5925 McLaughlin Road Mississauga, Ont. L5R 1B8 Canada Tel: (905) 501 4785 Fax: (905) 501 4786

EN G L A N D

Cooper Power Tools GmbH & Co. OHG An Apex Tool Group, LLC company C/O Spline Gauges Piccadilly, Tamworth, Staffordshire B78 2ER United Kingdom Tel: +44 1827 8741 28 Fax: +44 1827 8741 28

HUN G A R Y

Cooper Tools Hungaria Kft. An Apex Tool Group, LLC company Berkenyefa sor 7 Pf: 640 9027 Györ Hungary Tel: +36 96 66 1383 Fax: +36 96 66 1135

F r a n c e

M e x i c o

Cooper Power Tools SAS An Apex Tool Group, LLC company 25 rue Maurice Chevalier 77330 Ozoir-La-Ferrière France Tel: +33 1 6443 2200 Fax: +33 1 6443 1717

Cooper Tools de México S.A. de C.V. An Apex Tool Group, LLC company Vialidad El Pueblito #103 Parque Industrial Querétaro Querétaro, QRO 76220 Mexico Tel: +52 (442) 211 3800 Fax: +52 (442) 103 0443

www.apextoolgroup.com www.apextoolgroup.eu

Conversion Tables

Table of Contents

Torque – Miscellaneous

Torque Conversion – In. Lbs. (Nm)*

Model Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Utica Torque Products Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Torque Limiting Screwdrivers Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Standard Models, Accessories & Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Miniature Models, Accessories & Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Click Type Torque Sensing Wrenches Introduction . . . . . . . . . . . . . . . . . . . . . 10-11

Ratchet Head, Flex Head Ratchet, Plain Head & Preset Models . . . . . . . . . . 12-13

Interchangeable Head “A” Size Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15

Interchangeable Head “B” Size Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17

Torque Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conversion Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Torque Wrench Cautions ! 1. Do not use torque wrench to loosen tightened fasteners beyond maximum tool capacities. 2. Never use an extension unless authorized by the manufacturer. 3. Torque wrenches are precision instruments – provide adequate storage to protect from damage. RETURN MICROMETER WRENCHES TO LOWEST SETTING AFTER EACH USE. 4. ALWAYS WEAR APPROVED EYE PROTECTION.

Torque Conversion Factors

In. Lbs.

To Convert

Into

Multiply By

5 10 15 20 25 30 35 40 45

0.6 1.1 1.7 2.3 2.8 3.4 4.0 4.5 5.1

50 60 70 80 90 100 110 120 130

5.7 6.8 7.9 9.0 10.2 11.3 12.4 13.6 14.7

140 150 160 170 180 190 200

15.8 17.0 18.1 19.2 20.3 21.5 22.6

Inch Pounds Inch Pounds Inch Pounds Inch Pounds Foot Pounds Foot Pounds Foot Pounds Foot Pounds Newton Meters Newton Meters Newton Meters Newton Meters Kg meters Kg meters Kg meters Kg Cm Kg Cm Kg Cm

Foot Pounds Newton meters Kg-meters Kg-Cm Inch Pounds Newton meters Kg-meters Kg-Cm Inch Pounds Foot Pounds Kg-meters Kg-Cm Inch Pounds Foot Pounds Newton-meters Inch Pounds Foot Pounds Newton-meters

0.0835 0.1130 0.0115 1.1519 12.000 1.3560 0.1382 13.8240 8.8440 0.7370 0.1020 10.2000 86.8100 7.2340 9.8040 0.8681 0.0723 0.0980

*Rounded values.

Torque Conversion – Ft. Lbs. (Nm)* Ft. Lbs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 *Rounded values.

1.36 2.7 4.1 5.4 6.8 8.1 9.5 10.9 12.2 13.6 14.9 16.3 17.6 19.0 20.3 21.7 23.1 24.4 25.8 27.1 28.5 29.8 31.2 32.5 33.9 35.3 36.6 38.0 39.3 40.7 42.0 43.4 44.8 46.1 47.5 48.8 50.2 52.0 52.9 54.2 55.6 57.0

Ft. Lbs.

43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

58.3 60.0 61.0 62.4 63.7 65.1 66.4 67.8 69.2 70.5 71.9 73.2 74.6 75.9 77.3 78.7 80.0 81.4 82.7 84.1 85.4 86.8 88.1 90.0 90.9 92.2 93.6 94.9 96.3 97.6 99.0 100.3 102.0 103.1 104.4 105.8 107.1 108.5 110.0 111.2 112.6 114.0

85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 225 250 275 300 350 400

115.3 117.0 118.0 119.3 121.0 122.0 123.4 125.0 126.1 127.5 129.0 130.2 131.5 133.0 134.2 135.6 149.2 156.0 163.0 170.0 176.3 183.1 190.0 197.0 203.4 210.2 217.0 224.0 231.0 237.3 244.1 251.0 258.0 264.4 271.2 305.1 339.0 373.0 407.0 475.0 542.4

Miscellaneous Conversion Factors To Convert

Into

Multiply By

Inches Millimeters Pounds Kilograms psi bar

Millimeters Inches Kilograms Pounds bar psi

25.4000 0.0394 0.4536 2.2050 0.069 14.5

Model Number Index Model Page

Model Page

825 . . . . . . . . . 7,15,17 838 . . . . . . . . . . 15,17 858 . . . . . . . . . . . . . 17 1104 . . . . . . . . . . . . . 7 1105 . . . . . . . . . . . . . 7 1106 . . . . . . . . . . . . . 7 1108 . . . . . . . . . . 7,15 1110 . . . . . . . . . . 7,15 1112 . . . . . . . . . . 7,15 1114 . . . . . . . . . . 7,15 3108 . . . . . . . . . 15,17 3110 . . . . . . . . . 15,17 3112 . . . . . . . . . 15,17 3114 . . . . . . . . . 15,17 3116 . . . . . . . . . 15,17 3118 . . . . . . . . . 15,17 3120 . . . . . . . . . 15,17 5110 . . . . . . . . . . . . 17 5112 . . . . . . . . . . . . 17 5114 . . . . . . . . . . . . 17 5116 . . . . . . . . . . . . 17 5118 . . . . . . . . . . . . 17 5120 . . . . . . . . . . . . 17 5122 . . . . . . . . . . . . 17 5124 . . . . . . . . . . . . 17 7120 . . . . . . . . . . . . 17 7124 . . . . . . . . . . . . 17 7128 . . . . . . . . . . . . 17 7130 . . . . . . . . . . . . 17 7132 . . . . . . . . . . . . 17 28522 . . . . . . . . . . . 15 28523 . . . . . . . . . . . 17 10mm11 . . . . . . . . . 15 10mm13 . . . . . . 15,17 11mm13 . . . . . . 15,17 12mm13 . . . . . . 15,17 13mm13 . . . . . . 15,17 13mm15 . . . . . . . . . 17 14mm13 . . . . . . 15,17 14mm15 . . . . . . . . . 17 15mm13 . . . . . . 15,17 15mm15 . . . . . . . . . 17 16mm13 . . . . . . 15,17 16mm15 . . . . . . . . . 17 17mm15 . . . . . . . . . 17 185-000X . . . . . . . . . 7 185-00X . . . . . . . . . . 7 185-0X . . . . . . . . . . . 7 185-10X . . . . . . . . . . 7 185-1X . . . . . . . . . . . 7 185-2X . . . . . . . . . . . 7 185-3X . . . . . . . . . . . 7 185-4X . . . . . . . . . . . 7 18mm15 . . . . . . . . . 17 19mm15 . . . . . . . . . 17 19mm17 . . . . . . . . . 17

21mm15 . . . . . . . . . 17 21mm17 . . . . . . . . . 17 22mm17 . . . . . . . . . 17 24mm17 . . . . . . . . . 17 28715-01 . . . . . . . . . 9 28715-02 . . . . . . . . . 9 28715-03 . . . . . . . . . 9 28715-04 . . . . . . . . . 9 28715-05 . . . . . . . . . 9 28715-06 . . . . . . . . . 9 28715-07 . . . . . . . . . 9 30mm17 . . . . . . . . . 17 440-3X . . . . . . . . . . . 7 445-00X . . . . . . . . . . 7 445-0X . . . . . . . . . . . 7 445-10X . . . . . . . . . . 7 445-20X . . . . . . . . . . 7 445-30X . . . . . . . . . . 7 446-0X . . . . . . . . . . . 7 446-1X . . . . . . . . . . . 7 446-2X . . . . . . . . . . . 7 44-71-B . . . . . . . . . . 7 6mm11 . . . . . . . . . 15 7mm11 . . . . . . . . . . 15 8mm11 . . . . . . . . . 15 CH-150 . . . . . . . . . . 14 CH-150F . . . . . . . . 16 CH-75F . . . . . . . . . 16 CHA-11 . . . . . . . . . 14 CHA-23 . . . . . . . . . 14 CHA-6 . . . . . . . . . . 14 CHB-110 . . . . . . . . 16 CHB-170 . . . . . . . . 16 CHB-225 . . . . . . . . 16 CHB-55 . . . . . . . . . 16 CHB-85 . . . . . . . . . 16 EX-254 . . . . . . . 15,17 EX-372 . . . . . . . . . . 15 EX-375 . . . . . . . . . . 17 EX-503 . . . . . . . 15,17 EX-623 . . . . . . . . . . 17 EX-751 . . . . . . . . . . 17 HW19 . . . . . . . . . . . . 7 HW20 . . . . . . . . . . . . 9 HX 102 . . . . . . . . . . 15 HX 122 . . . . . . . . . . 15 HX 142 . . . . . . . . . . 15 HX 162 . . . . . . . . . . 15 HX 42 . . . . . . . . . . . 15 HX 52 . . . . . . . . . . . 15 HX 62 . . . . . . . . . . . 15 HX 72 . . . . . . . . . . . 15 HX 82 . . . . . . . . . . . 15 HX 92 . . . . . . . . . . . 15 KT-100 . . . . . . . . . . . 7 KT-130 . . . . . . . . . . . 7

Model Page

KT-30 . . . . . . . . . . . . 7 KTT-1 . . . . . . . . . . . . 9 LB 102 . . . . . . . . . . 15 LB 122 . . . . . . . . . . 15 LB 142 . . . . . . . . . . 15 LB 162 . . . . . . . . . . 15 LB 164 . . . . . . . . . . 17 LB 182 . . . . . . . . . . 15 LB 184 . . . . . . . . . . 17 LB 202 . . . . . . . . . . 15 LB 204 . . . . . . . . . . 17 LB 222 . . . . . . . . . . 15 LB 224 . . . . . . . . . . 17 LB 242 . . . . . . . . . . 15 LB 244 . . . . . . . . . . 17 LB 264 . . . . . . . . . . 17 LB 284 . . . . . . . . . . 17 LB 304 . . . . . . . . . . 17 LB 324 . . . . . . . . . . 17 LB 344 . . . . . . . . . . 17 LB 364 . . . . . . . . . . 17 LB 82 . . . . . . . . . . . 15 LF 122 . . . . . . . . . . 15 LF 142 . . . . . . . . . . 15 LF 162 . . . . . . . . . . 15 LF 164 . . . . . . . . . . 17 LF 182 . . . . . . . . . . 15 LF 184 . . . . . . . . . . 17 LF 202 . . . . . . . . . . 15 LF 204 . . . . . . . . . . 17 LF 222 . . . . . . . . . . 15 LF 224 . . . . . . . . . . 17 LF 242 . . . . . . . . . . 15 LF 244 . . . . . . . . . . 17 LF 284 . . . . . . . . . . 17 LF 324 . . . . . . . . . . 17 LF 364 . . . . . . . . . . 17 M-825 . . . . . . . 7,15,17 M-838 . . . . . . . . 15,17 M-858 . . . . . . . . . . . 17 MB 102 . . . . . . . . . 15 MB 112 . . . . . . . . . 15 MB 122 . . . . . . . . . 15 MB 124 . . . . . . . . . 17 MB 132 . . . . . . . . . 15 MB 134 . . . . . . . . . . 17 MB 142 . . . . . . . . . 15 MB 144 . . . . . . . . . 17 MB 152 . . . . . . . . . 15 MB 154 . . . . . . . . . . 17 MB 164 . . . . . . . . . . 17 MB 174 . . . . . . . . . . 17 MB 184 . . . . . . . . . . 17 MB 194 . . . . . . . . . 17 MB 204 . . . . . . . . . 17 MB 224 . . . . . . . . . . 17

Model Page

MB 62 . . . . . . . . . . MB 72 . . . . . . . . . . MB 82 . . . . . . . . . . MB 92 . . . . . . . . . . MO 102 . . . . . . . . . MO 124 . . . . . . . . . MO 134 . . . . . . . . . MO 144 . . . . . . . . . MO 154 . . . . . . . . . MO 164 . . . . . . . . . MO 174 . . . . . . . . . MO 184 . . . . . . . . . MO 194 . . . . . . . . . MO 204 . . . . . . . . . MO 224 . . . . . . . . . MO 364 . . . . . . . . . MO 62 . . . . . . . . . . MO 72 . . . . . . . . . . MO 82 . . . . . . . . . . MO 92 . . . . . . . . . . MP-15 . . . . . . . . . . OP 102 . . . . . . . . . . OP 112 . . . . . . . . . . OP 122 . . . . . . . . . . OP 142 . . . . . . . . . . OP 162 . . . . . . . . . . OP 164 . . . . . . . . . . OP 182 . . . . . . . . . . OP 184 . . . . . . . . . . OP 202 . . . . . . . . . . OP 204 . . . . . . . . . . OP 222 . . . . . . . . . . OP 224 . . . . . . . . . . OP 242 . . . . . . . . . . OP 244 . . . . . . . . . . OP 264 . . . . . . . . . . OP 284 . . . . . . . . . . OP 304 . . . . . . . . . . OP 324 . . . . . . . . . . OP 344 . . . . . . . . . . OP 364 . . . . . . . . . . OP 384 . . . . . . . . . OP 404 . . . . . . . . . . OP 42 . . . . . . . . . . . OP 52 . . . . . . . . . . . OP 62 . . . . . . . . . . . OP 72 . . . . . . . . . . . OP 82 . . . . . . . . . . . P-15 . . . . . . . . . . . PS 122 . . . . . . . . . . PS 82 . . . . . . . . . . . RS 122 . . . . . . . . . . RS 124 . . . . . . . . . . RS 164 . . . . . . . . . . RS 82 . . . . . . . . . . . T153KR . . . . . . . . .

15 15 15 15 15 17 17 17 17 17 17 17 17 17 17 17 15 15 15 15 18 15 15 15 15 15 17 15 17 15 17 15 17 15 17 17 17 17 17 17 17 17 17 15 15 15 15 15 18 15 15 15 17 17 15 13

Model Page

T702KR . . . . . . . . . 13 TCI-150RA . . . . . . . 13 TCI-150RA-3/8 . . . . 13 TCI-250R . . . . . . . . 13 TCI-750R . . . . . . . . 13 TCI-750R-1/2 . . . . . 13 TCI-75FRN . . . . . . . 13 TS-100 . . . . . . . . . 6,7 TS-30 . . . . . . . . . . 6,7 TS-35 . . . . . . . . . . . . 6 TS-3M . . . . . . . . . . . 6 TS-SN-1 . . . . . . . . . . 6 TS-SN-2 . . . . . . . . . . 6 TT-1 . . . . . . . . . . . 8,9 TT-SN-1 . . . . . . . . . . 8 TW0 . . . . . . . . . . . . . 9 TW10D . . . . . . . . . . 9 TW11D . . . . . . . . . . . 9 TW12D . . . . . . . . . 7,9 TW13D . . . . . . . . . 7,9 TW14D . . . . . . . . . . . 9 TW15D . . . . . . . . . . . 9 TW16D . . . . . . . . . . . 9 TW1D . . . . . . . . . . . 9 TW2D . . . . . . . . . . . . 9 TW3D . . . . . . . . . . 7,9 TW4D . . . . . . . . . . 7,9 TW5D . . . . . . . . . . . 9 TW6D . . . . . . . . . . 7,9 TW7D . . . . . . . . . . 7,9 TW8D . . . . . . . . . . . 9 TW9 . . . . . . . . . . . . . 9 V152KR . . . . . . 13,15 V702KR . . . . . . 13,15

Utica Torque Products Introduction

A Name You Can Trust Utica products offer high quality solutions for your torque applications. Utica products add value to the assembly process by enabling you to assess, control and improve product reliability, which leads to customer satisfaction. Whether the application is cellular phone assembly involving fine threaded screws or an automotive assembly operation fastening bolts, Utica torque products are the right choice.

Quality Our goal is to provide high quality torque tools that will maintain accuracy as long as possible. All Utica torque products are made of top grade materials. Working parts are heat treated for added strength and durability. Each Utica torque tool is calibrated according to ASME B107.14M before leaving the plant, using test equipment traceable to NIST. Utica manufacturing processes are ISO 9001 certified, which means that the Utica brand is manufactured to the highest standards.

Warranty Torque Products (excluding accessories) are warranted as follows:

Screwdrivers

Torque Range (Nm)

Product – One (1) year from date of purchase to be free of defects in materials and workmanship. Calibration – Ninety (90) days from date of purchase. This warranty does not extend to any product, which has been altered or abused.

Click Wrenches

Torque Range (Nm)

1000

200

100

.25

5 1 0

Miniature Adjustable

Miniature Preset

Standard Adjustable

Standard Preset

Ratchet Head

Interchangeable Head “A” Adjustable

Interchangeable Head “A” Preset

Interchangeable Head “B” Adjustable

Interchangeable Head “B” Preset

Calibration Intervals

Why Is Torque Important?

As a general rule, we recommend calibrating Utica torque products every six months. However, accurate calibration intervals need to be based on quality objectives, number of cycles and other application related details.

When we apply torque to fasteners such as bolts and screws, we are actually clamping parts together. The amount of torque applied determines how well the fastener does its job in the long run. If we apply too little torque, the fastener can vibrate and eventually loosen.

To locate your nearest Utica Service Center for calibration, simply visit our website at www.uticatools.com.

On the other hand, if we apply too much torque, the fastener will over stress and can break or strip the threads. Either way, the fastener doesn’t do what its suppose to do – hold something together. The objective is to apply enough torque to a fastener, creating tension that is greater than any external force trying to separate it.

Ordering Information Utica products are distributed world-wide. To locate your nearest Utica distributor, visit our website at www.uticatools.com or contact us at 1-800-845-5629 or fax (803) 951-7576.

10 lbs. of Force @ 6”= 5 ft.lbs

5 lbs. of Force @ 12”= 5 ft.lbs

What Is Torque? The concept of torque is a mystery for many people. Ask a group of people to define torque and you’ll probably receive a variety of answers. Open a dictionary to the definition of torque and you’ll be greeted with terms such as torsion, axis, and vector. However, if the definition of torque is boiled down to layman’s terms, it’s the measurement of a turning or twisting force. A simple example is the force required to turn the head of a bolt on an automobile chassis. Most tool boxes would include some of the most common tools used to apply torque, such as screwdrivers, wrenches, and impact tools.

Force

Torque

When torque is applied to the head of a bolt during a fastening process, there are actually two main forces at work. First, we are applying a force - torque to the bolt head to tighten it. The second force at work is the tension or stretch created that runs the length of the bolt. These two forces are closely related. The more torque applied to the bolt head, the more tension or “stretch” is applied to the length of the bolt. Tension In Bolt

Clamping Force

How Is Torque Measured? Torque is measured by multiplying the amount of force applied by the distance from the point we are turning. For instance, if we are turning a bolt and apply 5 lbs. of force at the end of a wrench measuring 1 ft., the torque would equal 5 ft. lbs. This doesn’t tell us what the optimal torque is for the fastener, but it does allow us to quantify the amount of torque we are applying to a fastener.

What Is The Correct Torque Level For A Fastener? When an engineer calculates the correct torque level for a fastener, several issues must be addressed. The first issue is the maximum load that the fastener will experience. Second is the strength of the material that the fastener will clamp. Third is whether the joint is hard or soft. The fourth issue is the nature of the external force acting on the joint, such as vibration, pulling, or twisting. Through statistical analysis, an engineer can determine the optimal level of torque that should be applied to a joint for maximum performance.

Torque Limiting Screwdrivers Introduction

Torque Limiting Screwdrivers

Easy-Release Bit Holder For Fast Bit Changes

Utica offers a complete line of torque limiting screwdrivers covering a range of 2-640 in.-oz.

Precision Micrometer Scale

All Utica screwdrivers feature aluminum housings to reduce weight and maximize durability. Six standard models are available for light duty torque applications including general electronic and computer assembly. Two miniature models offer reliable fastening of the very smallest of applications such as cellular phone assembly.

(adjustable models)

Utica torque screwdrivers feature a unique roller bearing cam, which produces smooth, accurate, and consistent performance when tightening fasteners. When the maximum torque setting is achieved, the cam mechanism automatically slips to prevent over-tightening. In addition to being highly durable, several features have been engineered into Utica screwdrivers to increase ease of use. Each of the three standard adjustable models are distinguished by red, blue Screwdrivers

Torque Range (Nm) 5

Adjusting Collar (adjustable models)

Spring-Loaded Locking Collar (adjustable models)

and black for easy identification. Plus, a patented, spring-loaded locking collar locks the scale at the desired torque setClick Wrenches Torque ting. This prevents the operator from accidentally Range (Nm) using the wrench in the unlocked position, which 1000 may lead to incorrectly tightened fasteners. All models feature an easy-release bit holder, which securely retains bits during operation, while 200 permitting easy removal. Color Coded

Casing For Easy Reference

100

.25

(standard adjustable models)

5 1 0

Miniature Adjustable

Miniature Preset

Standard Adjustable

Standard Preset

Ratchet Head

Interchangeable Head “A” Adjustable

Interchangeable Head “A” Preset

Interchangeable Head “B” Adjustable

Interchangeab Head “B” Preset

Quality

Our manufacturing processes are ISO 9001 certified, which means that Utica products are manufactured to the highest standards. Quality materials, precision machining and assembly is what makes Utica torque screwdrivers the tool of choice.

Electronics assembly and other light screw assembly applications demand precision that can only be accomplished with the use of precision tools. All Utica torque screwdrivers are made of top grade materials machined to exacting tolerances. Working parts are heat treated for added strength and durability. Then, each tool is carefully assembled by our experienced technicians.

Calibration Intervals As a general rule, we recommend calibrating Utica torque products every six months. However, the quality objectives of the operatorâ&#x20AC;&#x2122;s organization will ultimately determine the frequency of tool calibration.

Each Utica screwdriver is calibrated according to ASME B107.14M before leaving the plant, using test equipment traceable to NIST.

To locate your nearest Utica Service Center for calibration, visit our website at www.uticatools.com.

Ground And Tuned Torque Spring For Repeatability And Accuracy

Precision Ground Roller Bearing Cam

All-Aluminum Housing To Reduce Weight And Increase Durability

Adjusting Screw

Torque Limiting Screwdrivers Standard Models

■ Standard product calibrated right hand only. Left hand calibration on request. ■ Choice of adjustable models with precision micrometer scale or factory preset models. ■ U.S. Standard or metric scales ■ Precision micrometer scale (adjustable models) calibrated in inch-ounces or inch-pounds. Metric models: cm-kg. ■ Easy-release bit holders securely retain bits during operation while permitting easy removal. ■ Anti-backlash design for repeatability. ■ Meets or exceeds ASME B107.14M and ISO 6789 specifications. ■ Adjustable model accuracy is ±6% of setting, starting at 20% of full scale to full scale. Right hand only. ■ Calibration certificate can be requested when ordering. Adjustable Models Model No.

Collar Increments Hex Drive Color

Range

Weight lbs. kg.

U.S. Standard TS-100 TS-30 TS-35

20–100 in.-oz. Black 6.0–30.0 in.-lb. Red 6.0–36.0 in.-lb. Blue

2 in.-oz. 1/4 Female .50 1 in.-lb. 1/4 Female .50 1 in.-lb. 1/4 Female .50

.23 .23 .23

Metric TS-3M*

0.7–3.5 Nm

Preset Models Model No.

TS-SN-1 TS-SN-2

Gold

.1 Nm

1/4 Female .50

.23

(Preset models are designed for highly repetitive assembly line operations.)

Range in.-oz.

20–150 128–640

in.-lb.

cm-kg

Hex Drive

1.25–9.38 0.14–1.06 1.44–10.81 1/4 Female 8.0–40.0 0.9–4.52 9.22–46.1 1/4 Female

NOTE: When ordering preset tools, specify desired torque setting.

TS-30

TS-SN-1

Torque Limiting Screwdrivers Standard Model Accessories & Kits

Hex Bits

Square Drive Adapter Hex Size

Cap Screw Size

Set Screw Size

Flathead Screw Size

050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16

0 1 2,3 4,5 6 8 10 1/4

3,4 5,6 8 10 1/4 5/16 3/8

1,2 3,4 5,6 8 10 1/4 -

Part No.

185-000X 185-00X 185-0X 185-1X 185-9X 185-2X 185-10X 185-3X 185-4X

Phillips Bits Part No.

Point Size

Screw Size

446-0X 446-1X 446-2X 440-3X

0 1 2 3

0,1 2,3,4 5,6,7,8,10 12,14

Part No.

Description

44-71-B

1/4 Hex to 1/4 Square.

Bit Holders Part No.

Square Drive (in.)

Female Hex (in.)

Description

825 M-825

1/4 1/4

Magnetic

SAE Size Sockets Part No.

1108 1110 1112 1114

Metric Size Sockets

Square Dr. (in.)

Hex Opening (in.)

Part No.

Square Dr. (in.)

Hex Opening (mm)

1/4 1/4 1/4 1/4

1/4 5/16 3/8 7/16

6mm11 7mm11 8mm11 10mm11

1/4 1/4 1/4 1/4

6mm 7mm 8mm 10mm

Screwdriver Bits Part No.

Blade Width

Blade Thickness

Screw Size

445-00X 445-0X 445-10X 445-20X 445-30X

.134 .155 .185 .214 .250

.028 .030 .034 .036 .040

2,3 3,4 4,5 5,6 6,8

Kit No. KT-100

Range 20-100 in.-oz. No. Qty. Part Comp.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

TS-100 TW3D TW4D TW6D TW7D TW12D TW13D 185-000X 185-00X 185-0X

20 piece

Description

Adj. torque screwdriver 1/4” fm. hex Torque screwdriver bld. .000 Torque screwdriver bld. .100 Hex socket 3/32” Hex socket 7/64” Hex key .028 Hex key .035 Screwdriver hex bit .050 Screwdriver hex bit 1/16” Screwdriver hex bit 5/64” Screwdriver bld. torque screw 445-00X SZ. 2, 3 Screwdriver bld. torque screw 445-10X SZ. 4, 5 Phillips bld. torque screw 446-0X SZ. 0, 1 Phillips bld. torque screw 446-1X SZ. 2, 3, 4 44-71-B Adapter 1/4” drive HW19 Bit holder mini. torque 1104 1/4” Dr. reg. socket 1/8” 1106 1/4” Dr. reg. socket 3/16” Plas/case Insert

Kit No. KT-30

Range 6 to 30 in.-lb. No. Qty. Part Comp.

1 1 1 1 1 1 1 1 1 1

TS-30 TW4D TW7D TW13D 185-000X 185-00X 185-0X 185-1X 185-2X 185-3X

1 445-00X 1 445-10X 1 445-20X 1 445-30X 1 446-0X 1 446-1X 1 1 1 1 1 1 1 1

44-71-B HW19 1104 1106 1108 1110 Plas/case Insert

Miniature Bit Holders Part No.

Description

HW19

To adapt miniature accessories for use in standard models. See page 11 for accessories.

24 piece

Range 20 in.-oz. to 30 in.-lb. No. Qty. Part Comp.

Description

Adj. torque screwdriver 1/4” fm. hex Torque screwdriver bld. .100 Hex socket 7/64” Hex key .035 Screwdriver hex bit .050 Screwdriver hex bit 1/16” Screwdriver hex bit 5/64” Screwdriver hex bit 3/32” Screwdriver hex bit 1/8” Screwdriver hex bit 5/32” Screwdriver bld. torque screw SZ. 2, 3 Screwdriver bld. torque screw SZ. 4, 5 Screwdriver bld. torque screw SZ. 5, 6 Screwdriver bld. torque screw SZ. 6, 8 Phillips bld. torque screw SZ. 0, 1 Phillips bld. torque screw SZ. 2, 3, 4 Adapter 1/4” drive Bit holder mini. torque 1/4” Dr. reg. socket 1/8” 1/4” Dr. reg. socket 3/16” 1/4” Dr. reg. socket 1/4” 1/4” Dr. reg. socket 5/16”

CAUTION: 1. Under normal use, periodic recalibration may be necessary to ensure accurate readings and applied torque. 2. FOR EXTENDED SPRING LIFE, RETURN TO LOWEST SETTING AFTER EACH USE.

Kit No. KT-130

Kit KT-130

1 1 1 2 1 2 1 2 2 2 2 1 1 1 2 2 1 1 2 2 1 2 2 1 1 2 1 1 1 1

43 piece

Description

TS-30 TS-100 TW3D TW4D TW6D TW7D TW12D TW13D 185-000X 185-00X 185-0X 185-3X 185-2X 185-3X

Adj. torque screwdriver 1/4” fm. hex Adj. torque screwdriver 1/4” fm. hex Torque screwdriver bld. .080 Torque screwdriver bld. .100 Hex socket 3/32” Hex socket 7/64” Hex key .028 Hex key .035 Screwdriver hex bit .050 Screwdriver hex bit 1/16” Screwdriver hex bit 5/64” Screwdriver hex bit 3/32” Screwdriver hex bit 1/8” Screwdriver hex bit 5/32” bld. torque screw 445-00X Screwdriver SZ. 2, 3 bld. torque screw 445-10X Screwdriver SZ. 4, 5 bld. torque screw 445-20X Screwdriver SZ. 5, 6 bld. torque screw 445-30X Screwdriver SZ. 6, 8 446-0X Phillips bld. torque screw SZ. 0, 1 Phillips bld. torque screw 446-1X SZ. 2, 3, 4 Phillips bld. torque screw 446-2X SZ. 4, 6, 7, 8, 10 44-71-B Adapter 1/4” drive HW19 Bit holder mini. torque 1104 1/4” Dr. reg. socket 1/8” 1105 1/4” Dr. reg. socket 5/32” 1106 1/4” Dr. reg. socket 3/16” 1108 1/4” Dr. reg. socket 1/4” 1110 1/4” Dr. reg. socket 5/16” Plas/case Insert

Torque Limiting Screwdrivers Miniature Models

■ Specifically designed for reliable tightening of the very smallest threaded fasteners. ■ Largest model weighs only 1 oz. ■ Operate in same manner as standard models — reach set torque and slip to prevent over-torquing of delicate components. ■ Accuracy ±6%, right hand only. Meets or exceeds ASME B107.14M and ISO 6789 specifications. ■ Choice of micrometer adjustable or factory preset models. ■ Calibration certificate can be requested when ordering. Adjustable Models Model No.

Range

Increments Drive

Length in. mm

Weight lbs. kg

U.S. Standard TT-1

5–20 in.-oz. 1/4 in.-oz. Univ. 3.625

.06

.03

Preset Models Model No.

in.-oz.

TT-SN-1

5–30

Range Nm

cm-kg

Drive

Length in. mm

.04–.21 .36–2.16 Univ. 3.625

Weight lbs. kg

.06

.03

NOTE: When ordering preset tools, specify desired torque setting

TT-1

TT-SN-1

Torque Limiting Screwdrivers Miniature Model Accessories & Kit

Slotted Bits

Hex Keys

Part No.

Blade Width

Blade Thickness

Screw Size

TW0 TW1D TW2D TW3D TW4D

.040 .055 .070 .080 .100

.004 .006 .006 .008 .010

0000,000 0000,000 000,00 00,0,1 0,1,2

Part No.

Hex Size

Screw Size

Nut Size

TW5D TW6D TW7D TW8D TW9

5/64 3/32 7/64 1/8 5/32

000,00 0 1 2 -

000,00 0,1

Hex Sockets

Part No.

Hex Size

Cap Screw Size

Set Screw Size

Flathead Screw Size

TW12D TW13D TW14D TW15D TW16D

.028 .035 .050 1/16 5/64

0 1 2, 3

0 1, 2 3, 4 5, 6 8

0 1, 2 3, 4 5, 6

Spline Key Part No.

28715-01 28715-02 28715-03 28715-04 28715-05 28715-06 28715-07

Spline Size

No. of Flutes

.048 .048 .060 .069 .072 .076 .096

4 6 6 6 6 4 6

Phillips Bits Part No.

Point Size

Screw Size

TW10D TW11D

0 1

0,1 2, 3, 4

Miniature Kit No. KTT-1 Range 5-20 in.-oz. Qty.

Part No. Comp.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1

TT-1 TW0 TW1D TW2D TW3D TW4D TW10D TW11D 28715-01 28715-02 28715-03 28715-04 28715-05 28715-06 28715-07 HW20 TW5D TW6D TW7D TW8D TW9 TW12D TW13D TW14D TW15D TW16D Case Insert

29 piece

Universal Bit Holder Part No.

Description

HW20

This holder can be drilled out to accommodate odd keys and bits. Also used as an adapter for checking light duty torque screwdrivers on Torque Testers.

Description

Adj. torque screwdriver Torque screwdriver bld. .040 Torque screwdriver bld. .055 Torque screwdriver bld. .070 Torque screwdriver bld. .080 Torque screwdriver bld. .100 Phillips screwdriver SZ. 0,1 Phillips screwdriver SZ. 2,3,4 Spline key size .048 - 4 Flutes Spline key size .048 - 6 Flutes Spline key size .060 - 6 Flutes Spline key size .069 - 6 Flutes Spline key size .072 - 6 Flutes Spline key size .076 - 4 Flutes Spline key size .096 - 6 Flutes Bit holder universal torque Hex socket 5/64” Hex socket 3/32” Miniature Kit KTT-1 Hex socket 7/64” Hex socket 1/8” Hex socket 5/32” Hex key .028 Hex key .035 Hex key .050 Hex key 1/16 Hex key 5/64

CAUTION: 1. Under normal use, periodic recalibration may be necessary to ensure accurate readings and applied torque. 2. FOR EXTENDED SPRING LIFE, RETURN TO LOWEST SETTING AFTER EACH USE.

“Click” Type Torque Sensing Wrenches Introduction

Click Wrenches Utica click style torque wrenches are built to exacting standards to maintain maximum accuracy. Only top grade materials are used in Utica click wrenches. Working parts are heat-treated to increase durability and service life. Each wrench is tested with equipment traceable to NIST standards. Because of a high commonality of parts, the procedures for calibrating Utica click wrenches are the same from the smallest to the largest wrench in our product offering. This saves the operator time and the expense of developing specific procedures for different wrench sizes. Utica’s audible “click” plus a few degrees of travel provides a simple, quick indication that the operator has achieved the predetermined torque setting. All Utica click wrenches incorporate a patented, low friction torque control mechanism that produces highly accurate readings in clockwise and counterclockwise directions. Plus, a patented, spring-loaded locking collar locks the scale on the desired torque setting. This prevents the operator from accidentally using the wrench in the unlocked position.

Nickel Plated Heavy-Duty Hardened Case

Forged Arm For Strength And Durability

Calibration Intervals As a general rule, we recommend calibrating Utica torque products every six months. However, the quality objectives of the operator’s organization will ultimately determine the frequency of tool calibration. Visit our website at www.uticatools.com to locate your nearest Utica Service Center for calibration.

Ratchet Head Wrenches

Click Wrenches

Torque Range (Nm)

Ratchets are mainly used in maintenance and assembly applications and provide fastening in both clockwise and counterclockwise directions. A quick shift lever allows for easy single-hand shifting.

1000

200

100

Interchangeable Head Wrenches

Interchangeable head wrenches accept a variety of heads, allowing for greater versatility. Bi-directional versatility is obtained by simply removing the head, turning the wrench over and replacing the head.

5 1

Standard Preset

Ratchet Head

Interchangeable Head “A” Adjustable

Interchangeable Head “A” Preset

Interchangeable Head “B” Adjustable

Interchangeable Head “B” Preset

Actuator Precision Machined From Hardened Steel Specially Tempered Spring For Accuracy And Repeatability

Patented Torque Control Mechanism

Wrenches are protected in a free fitted plastic case. (250 ft.lbs. and below)

Patented Spring-Loaded Scale Locking Collar

Dual Scales Front– in.-lbs.

Back– Newton Meters

Comfort grip reduces fatique and increases productivity

Fine Adjustment Major Adjustment 11

“Click” Type Torque Sensing Wrenches Ratchet Head

TCI-750R

■ Drive Sizes: 1/4” through 1/2” ■ Audible “click” and/or a few degrees of travel provide simple, fast indication of micrometer – accurate torque settings. ■ Patented, low friction torque control mechanism produces accurate readings in either direction. ■ Accuracy is ± 4% of setting right hand (clockwise) and ± 6% of setting left hand (counterclockwise) within upper 80% of scale. ■ Two calibration adjustments (major and fine) permit easy and precise torque settings. Most conventional torque wrenches have only one adjustment. ■ Dual scale models give readings in in.-lbs./Newton Meters or ft.-lbs./Newton Meters. ■ Patented spring-loaded locking collar locks scale on desired reading and remains in locked position. Wrench cannot be left inadvertently unlocked. ■ Heavy-duty, reversible ratchet models have quick-shift lever to allow easy single-hand shifting. ■ Slim, lightweight design reduces fatigue and facilitates use in confined work areas. ■ Store all adjustable models at their lowest torque setting. ■ Calibration certificate can be requested when ordering.

TCI-150RA

TCI-750R-1/2

“Click” Type Torque Sensing Wrenches Ratchet Head

TCI-75FRN

Ratchet Head (in.-lb. Graduations) Drive Size (in.) Model No.

TCI-250R

1/4 3/8 3/8 3/8 1/2

Range in.-lb.

TCI-150RA* 30–150 TCI-150RA-3/8* 30–150 TCI-250R* 50–250 TCI-750R 150 –750 TCI-750R-1/2 150–750

Graduations in.-lb. Nm

3.4–17.0 3.4–17.0 5.7–28.3 – –

1.0 1.0 1.0 5.0 5.0

.11 .11 .11 – –

Length in. mm

9.5 9.5 12.5 14.25 14.5

241.3 241.3 317.5 362.0 368.3

Weight lb. kg

0.9 0.9 3.0 3.4 2.5

0.4 0.4 1.4 1.5 1.1

Ratchet Head (ft.-lb. Graduations) Drive Size (in.)

3/8

Model No.

TCI-75FRN*

Range ft.-lb.

15–75

20.3–102

Graduations ft.-lb. Nm

0.5

0.7

Length in. mm

14.25 362.0

Weight lb. kg

2.2

1.0

*Dual Scale Models: Either in.-lb./Nm graduations, or ft.-lb./Nm graduations.

Torque Wrench Repair Kits

Part No.

Repair Kit For:

V702KR V152KR T702KR T153KR

TCI-150RA TCI-150RA3/8, TCI-250R TCI-75FRN, TCI-750R TCI-750R-1/2, TCI-1600R

Note: Unless otherwise specified, all Utica® micrometer adjustable torque sensing wrenches are calibrated for use in both left and right hand directions.

“Click” Type Torque Sensing Wrenches Interchangeable Head “A” Size Series

CH-150

CHA-23

■ Drive Sizes: 1/4" through 3/4" ■ Accept variety of heads to suit specific application requirements. ■ Common center principal allows simple exchange or replacement of heads without need for recalibration. ■ Choice of micrometer adjustable or single setting (preset) models. ■ Accuracy is ±4% of setting right hand and ±6% of setting left hand within upper 80% of scale. ■ Calibration certificate can be requested when ordering. Micrometer Adjustable Wrench – “A” Size Model No.

CH-150*

Range in.-lb. Nm

30–150

Graduations in.-lb. Nm

3.4–17.0

1.0

.11

Length in. mm

Weight lb. kg

9.0

1.0

228.6

0.5

*Note: Dual Scale Models: Either in.-lb./Nm graduations, or ft.-lb./Nm graduations.

Single Setting (Preset) Wrench – “A” Size* Model No.

CHA-6 CHA-11 CHA-23

in.-lb.

10-50 20-100 40-200

Range Nm ft.-lb.

1.2-6 2.2-11 4.6-23

cm-kg

0.9–4.5 12–60 1.6–8 22–110 3.4–17 46–230

in.

Length mm

5.32 5.75 7.75

135.1 146.1 196.9

Weight lb.

0.17 0.3 0.4

0.08 0.14 0.18

NOTE: Single setting wrenches do not have a scale and must be set on torque tester. When ordering these preset tools, specify desired torque setting.

Head changes are quick and easy without the need for recalibration.

“Click” Type Torque Sensing Wrenches “A” Size Interchangeable Heads

Open End U.S. Standard “A” Opening Size

Part No.

1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4

OP OP OP OP OP OP OP OP OP OP OP OP OP OP OP

Maximum Torque Load

42 52 62 72 82 92 102 112 122 142 162 182 202 222 242

in.-lb.

ft.-lb.

20 35 45 50 67 78 138 193 275 410 420 420 420 420 420

1.7 2.9 3.8 4.2 5.6 6.5 12 16 23 34 35 35 35 35 35

2.3 4.0 5.1 5.6 7.6 8.8 16 22 31 46 48 48 48 48 48

Open End Metric

“A”

Maximum Torque Load

Opening Size

Part No.

6mm 7mm 8mm 9mm 10mm 11mm 12mm 13MM 14mm 15mm

MO 62 MO 72 MO 82 MO 92 MO 102 MO 112 MO 122 MO 132 MO 142 MO152

in.-lb.

ft.-lb.

62 71 133 186 274 410 420 420 420 420

5.1 5.9 11 16 23 34 35 35 35 35

7 8 15 21 31 46 48 48 48 48

Flare Nut U.S. Standard “A”

12 Point Box U.S. Standard “A” Opening Size

Part No.

7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4

LB 72 LB 82 LB 102 LB 122 LB 142 LB 162 LB 182 LB 202 LB 222 LB 242

Maximum Torque Load in.-lb.

ft.-lb.

50 67 138 275 410 420 420 420 420 420

4.0 5.6 12 23 34 35 35 35 35 35

5.6 7.6 7.6 31 48 48 48 48 48 48

12 Point Box Metric Opening Size

Part No.

6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm

MB 62 MB 72 MB 82 MB 92 MB 102 MB 112 MB 122 MB 132 MB 142 MB 152

Opening Size

Part No.

3/8 7/16 1/2 9/16 5/8 11/16 3/4

LF LF LF LF LF LF LF

Maximum Torque Load

122 142 162 182 202 222 242

in.-lb.

ft.-lb.

130 140 200 275 325 396 420

11 12 17 23 27 33 35

15 16 23 31 37 45 48

“A”

Maximum Torque Load in.-lb.

ft.-lb.

62 71 133 186 274 410 420 420 420 420

5.2 5.9 11 15 23 34 35 35 35 35

7 8 15 21 31 46 48 48 48 48

Hex Keys U.S. Standard “A” Hex Key Size

Part No.

1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4

HX 42 HX 52 HX 62 HX 72 HX 82 HX 92 HX 102 HX 122 HX 142 HX 162

Maximum Torque Load in.-lb.

ft.-lb.

8 16 28 44 65 95 128 222 350 420

0.6 1.3 2.3 3.6 5.4 7.9 11 18 29 35

0.9 1.8 3.2 5.0 7.3 11 14 25 40 48

SAE Size Sockets Part No.

Plain Square Drive “A” Maximum Torque Load in.-lb. ft.-lb. Nm

Drive Size

Part No.

1/4 3/8

PS 82 203.41 PS 122 203.41

16.95 16.95

23 23

1108 1110 1112 1114 3108 3110 3112 3114 3116 3118 3120

Square Drive (in.)

Hex Opening (in.)

1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8

1/4 5/16 3/8 7/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8

Bit Holders

Maximum Torque Load in.-lb. ft.-lb. Nm

Drive Size

Part No.

1/4 3/8

RS 82 203.41 RS 182 203.41

16.95 16.95

Rachet Repair Kits Part No.

Repair Kit

RS 82 RS 182

V702KR V152KR

23 23

6mm11 7mm11 8mm11 10mm11 10mm13 11mm13 12mm13 13mm13 14mm13 15mm13 16mm13

Hex Opening (mm)

1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8

6mm 7mm 8mm 10mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm

Female Hex (in.)

825 M-825 838 M-838

1/4 1/4 3/8 3/8

1/4 1/4 Magnetic 1/4 1/4 Magnetic

Part No.

Female Square Drive (in.)

Male Square Drive (in.)

EX-372 EX-254 EX-503

1/4 3/8 3/8

3/8 1/4 1/2

Head Adapter “A”

28522

Weld custom heads to adapters to couple with “A” handles to meet specific applications.

Ratcheting Square Drive “A”

Square Drive (in.)

Adapters

Metric Size Sockets Part No.

Part No.

NOTES: 1. “A” series drive heads are not interchangeable with “B” series heads. 2. Utica torque heads when used with Utica torque wrenches, meet the accuracy statements for Utica wrenches. We cannot guarantee accuracy when other manufacturers heads or wrenches are interchanged with a Utica part.

.55”

1.35” total

“Click” Type Torque Sensing Wrenches Interchangeable Head “B” Size Series

CH-75F

■ Designed for higher torque applications than “A” size series. ■ Accept a variety of head configurations to suit many fastener requirements.

CHB-110

■ Common center principal allows simple exchange or replacement of heads without need for recalibration. ■ Choice of micrometer adjustable or single setting (preset) models with same “click” action and features as “A” series wrenches. ■ Accuracy is ±4% of setting right hand and ±6% of setting left hand within upper 80% of scale. ■ Calibration certificate can be requested when ordering.

Micrometer Adjustable Wrench – “B” Size Model No.

CH-75F* CH-150F*

Range ft.-lb.

15–75 30–150

20.3-102 40.7-203

Graduations ft.-lb. Nm

0.5 1.0

0.7 1.4

Length in. mm

14.0 17.1

355.6 435.0

Weight lb. kg

2.0 2.5

0.9 1.1

*Note: Dual Scale Models: Either in.-lb./Nm graduations, or ft.-lb./Nm graduations.

Single Setting (Preset) Wrench – “B” Size* Model No.

CHB-55 CHB-85 CHB-110 CHB-170 CHB-225

in.-lb.

100–500 150-750 200-1000 300-1500 400-2000

11–55 17–85 22–110 34–170 45–225

Range ft.-lb.

8–40 12.5–62.5 16–80 25–125 33–165

cm-kg

112–560 172–860 224-1120 346-1730 460-2300

Length in. mm

8.25 10.5 12.5 14.25 16.25

209.6 266.7 317.5 362.0 412.8

NOTE: Single setting wrenches do not have a scale and must be set on torque tester. When ordering these preset tools, specify desired torque setting.

Weight lb. kg

1.0 1.3 1.5 1.7 1.9

0.5 0.6 0.7 0.8 0.9

“Click” Type Torque Sensing Wrenches “B” Size Interchangeable Heads

12 Point Flare Nut U.S. Standard “B” Part No.

1/2 9/16 5/8 11/16 3/4 7/8 1 1 1/8

LF 164 LF 184 LF 204 LF 224 LF 244 LF 284 LF 324 LF 364

Maximum Torque Load in.-lb.

ft.-lb.

200 275 325 396 500 800 1000 1000

17 23 27 33 42 67 83 83

23 31 37 45 56 90 113 113

RS 124

Ratcheting Square Drive “B” Maximum Torque Load in.-lb. ft.-lb. Nm

Drive Size

Part No.

3/8 1/2

RS 124 1199.25 99.94 RS 164 1992.0 166.0

135.6 225.0

Rachet Repair Kits Part No.

Repair Kit

RS124 RS164

T702KR T153KR

3108 3110 3112 3114 3116 3118 3120 5110 5112 5114 5116 5118 5120 5122 5124 7120 7124 7128 7130 7132

Opening Size

Part No.

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4

OP 164 OP 184 OP 204 OP 224 OP 244 OP 264 OP 284 OP 304 OP 324 OP 344 OP 364 OP 384 OP 404

Maximum Torque Load in.-lb.

ft.-lb.

550 770 1100 1375 1650 2100 2100 2100 2100 2100 2100 2100 2100

46 64 92 115 138 175 175 175 175 175 175 175 175

62 87 124 155 186 237 237 237 237 237 237 237 237

Open End Metric

“B”

Maximum Torque Load

Opening Size

Part No.

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 22mm 36mm

MO 124 MO 134 MO 144 MO 154 MO 164 MO 174 MO 184 MO 194 MO 204 MO 224 MO 364

in.-lb.

ft.-lb.

434 549 761 920 1097 1230 1372 1646 1921 2100 2100

36 46 63 77 92 103 114 137 160 175 175

49 62 86 104 124 139 155 186 217 237 237

Square Drive (in.)

Hex Opening (in.)

3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4

1/4 5/16 3/8 7/16 1/2 9/16 5/8 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 5/8 3/4 7/8 15/16 1

Part No.

10mm13 11mm13 12mm13 13mm13 14mm13 15mm13 16mm13 13mm15 14mm15 15mm15 16mm15 17mm15 18mm15 19mm15 20mm15 21mm15 19mm17 21mm17 22mm17 14mm17 30mm17

Square Drive (in.)

Hex Opening (mm)

3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4

10mm 11mm 12mm 13mm 14mm 15mm 16mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 19mm 21mm 22mm 24mm 30mm

Opening Size

Part No.

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8

LB 164 LB 184 LB 204 LB 224 LB 244 LB 264 LB 284 LB 304 LB 324 LB 344 LB 364

Maximum Torque Load in.-lb.

ft.-lb.

550 770 1100 1375 1650 2100 2100 2100 2100 2100 2100

46 64 92 115 138 175 175 175 175 175 175

62 87 124 155 186 237 237 237 237 237 237

12 Point Box Metric Opening Size

Part No.

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 22mm

MB 124 MB 134 MB 144 MB 154 MB 164 MB 174 MB 184 MB 194 MB 204 MB 224

“B”

Maximum Torque Load in.-lb.

ft.-lb.

434 549 761 920 1097 1230 1372 1646 1921 2100

36 46 63 77 92 103 114 137 160 175

49 62 86 104 124 139 155 186 217 237

Bit Holders

Metric Size Sockets

SAE Size Sockets Part No.

Open End U.S. Standard “B”

Part No.

Square Drive (in.)

Female Hex (in.)

825 M-825 838 M-838 858 M-858

1/4 1/4 3/8 3/8 1/2 1/2

1/4 1/4 Magnetic 1/4 1/4 Magnetic 1/4 1/4 Magnetic

Adapters Part No.

Female Square Drive (in.)

Male Square Drive (in.)

EX-254 EX-503 EX-375 EX-623 EX-751

3/8 3/8 1/2 1/2 1/2

1/4 1/2 3/8 5/8 3/4

Head Adapter “B”

28523

Weld custom heads to adapters to couple with “B” handles to meet specific applications.

Opening Size

12 Point Box U.S. Standard “B”

1.1”

2.9” total

Torque Accessories

Torque Analyzers ■ Ideal for setting torque on pneumatic tools ■ Accuracy of +/- 1% to nearest increment ■ English or metric scale ■ Quick brake release ■ Easy to read dial

P-15

P-15 Torque Analyzer Model No.

P-15 MP-15 (metric)

Graduations

Capacity

2 in.-lbs. 5 cm-kg

5-150 in.lbs. 5-173 cm-kg

General Drive Size: 5/16” male hex

Height

Width

Length

Weight

In.

Lbs.

8 8

203 203

5 5

127 127

18 18

457 457

23 23

Order No.

10.4 810002PT 10.4 810151

General Accessories Apex Fastener Tools

Quality Fastener Tools For more than half a century Apex has maintained the position of world leader in industrial fastening tools. Many power and insert bits, socket combinations and other drivers/adapters pioneered by Apex have today become industry standards, while Apex quality, service and selection give you unsurpassed value. ■ More Quality For Your Money

Apex quality starts with the selection of raw materials. Only carefully chosen, high grade tool steel is used to make Apex industrial fastener tools. Next, each tool is precision machined from solid bar stock to exacting standards of accuracy. You always get a snug, secure fit – a fit that is not possible from stamped tools. Finally, each Apex fastener tool is tempered with our exclusive heat treating process. During this step the degree of hardness is determined based upon the application. ■ Fast Delivery

All Apex standard catalog items are available off-the-shelf for immediate delivery. If you need special assistance with your order, your Apex manufacturer’s representative can handle any questions your may have. ■ Special Orders

Apex offers the broadest selection of screw driver and nut runner tools available, from bits, sockets and universal wrenches to extensions, adapters and nut setters. If you have a special application, contact your Apex representative. We may have what you need in stock, or can design and produce special fastener tools for almost any application.

POZIDRIV® ® SQUARE TORQ-SET RECESS ACR® TRI-WING®

CLUTCH HEAD

SLOTTED

SOCKET HEAD

SEL-O-FIT®

PHILLIPS ACR®

TORQ-SET®

FREARSON TORX® ®

PHILLIPS

HI-TORQUE®

■ Ordering Information

Apex products are distributed world-wide. For a catalog of the complete line of Apex quality fastener tools or to locate your nearest Apex distributor, visit our website at www.apex-tools.com.

Registered Trade Marks: HI-TORQUE, Voi-Shan; TORX, Camcar Division of Textron; ACR, POZIDRIV, TORQ-SET and TRI-WING, Phillips International Co.; SUPADRIV, EIS (Fasteners) LTD.; SEL-O-FIT, FLIP-TIP, and Apex, Apex Tool Group, LLC.

Conversion Tables Millimeter â&#x20AC;&#x201C; Decimal â&#x20AC;&#x201C; Fraction

mm 0.100 0.200 0.300 0.397 0.400 0.500 0.600 0.700 0.794 0.800 0.900 1.000 1.100 1.191 1.200 1.300 1.400 1.500 1.588 1.600 1.700 1.800 1.900 1.984 2.000 2.100 2.200 2.300 2.381 2.400 2.500 2.600 2.700 2.778 2.800 2.900 3.000 3.100 3.175 3.200 3.300 3.400 3.500 3.572 3.600 3.700 3.800 3.900 3.969 4.000 4.100 4.200 4.300 4.366 4.400 4.500 4.600 4.700 4.763 4.800 4.900 5.000 5.100

Dec. .0039 .0079 .0118 .0156 .0157 .0197 .0236 .0276 .0313 .0315 .0354 .0394 .0433 .0469 .0472 .0512 .0551 .0591 .0625 .0630 .0669 .0709 .0748 .0781 .0878 .0827 .0866 .0906 .0938 .0945 .0984 .1024 .1063 .1094 .1102 .1142 .1181 .1220 .1250 .1260 .1299 .1339 .1378 .1406 .1417 .1457 .1496 .1535 .1563 .1575 .1624 .1654 .1693 .1719 .732 .1772 .1811 .1850 .1875 .1890 .1929 .1969 .2008

in.

1/64

1/32

3/64

1/16

5/64

3/32

7/64

1/8

9/64

5/32

11/64

3/16

mm 5.159 5.200 5.300 5.400 5.500 5.556 5.600 5.700 5.800 5.900 5.953 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.747 6.800 6.900 7.000 7.100 7.144 7.200 7.300 7.400 7.500 7.541 7.600 7.700 7.800 7.900 7.938 8.000 8.100 8.200 8.300 8.334 8.400 8.500 8.600 8.700 8.731 8.800 8.900 9.000 9.100 9.128 9.200 9.300 9.400 9.500 9.525 9.700 9.800 9.900 9.922 10.000 10.100 10.200

Dec. .2031 .2047 .2087 .2126 .2165 .2188 .2205 .2244 .2283 .2323 .2344 .2362 .2402 .2441 .2480 .2500 .2520 .2559 .2598 .2638 .2656 .2677 .2717 .2756 .2795 .2813 .2835 .2874 .2913 .2953 .2969 .2992 .3031 .3071 .3110 .3125 .3150 .3189 .3228 .3268 .3281 .3307 .3346 .3386 .3425 .3438 .3465 .3504 .3543 .3583 .3594 .3622 .3661 .3701 .3740 .3750 .3819 .3858 .3898 .3902 .3937 .3976 .4016

in.

13/64

10.300 10.319 10.400 10.500 10.600 10.700 10.716 10.800 10.900 11.000 11.100 11.113 11.200 11.300 11.400 11.500 11.509 11.600 11.700 11.800 11.900 11.906 12.000 12.100 12.200 12.300 12.303 12.400 12.500 12.600 12.700 12.800 12.900 13.000 13.097 13.100 13.200 13.300 13.400 13.494 13.500 13.600 13.700 13.800 13.891 13.900 14.000 14.100 14.200 14.288 14.300 14.400 14.500 14.600 14.684 14.700 14.800 14.900 15.000 15.081 15.100 15.200 15.300

7/32

15/64

1/4

17/64

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

Dec. .4055 .4063 .4094 .4134 .4173 .4219 .4219 .4252 .4291 .4331 .4370 .4375 .4409 .4449 .4488 .4528 .4531 .4567 .4606 .4646 .4685 .4688 .4724 .4764 .4803 .4843 .4844 .4882 .4921 .4961 .5000 .5039 .5079 .5118 .5156 .5157 .5197 .5236 .5276 .5313 .5315 .5354 .5394 .5433 .5469 .5472 .5512 .5551 .5591 .5625 .5630 .5669 .5709 .5748 .5781 .5787 .5827 .5866 .5906 .5938 .5945 .5984 .6024

in. 13/32

27/64

7/16

29/64

15/32

31/64

1/2

33/64

17/32

35/64

9/16

37/64

19/32

mm 15.400 15.478 15.500 15.600 15.700 15.800 15.875 15.900 16.000 16.100 16.200 16.272 16.300 16.400 16.500 16.600 16.669 16.700 16.800 16.900 17.000 17.066 17.100 17.200 17.300 17.400 17.463 17.500 17.600 17.700 17.800 17.859 17.900 18.000 18.100 18.200 18.256 18.300 18.400 18.500 18.600 18.653 18.700 18.800 18.900 19.000 19.050 19.100 19.200 19.300 19.400 19.447 19.500 19.600 19.700 19.800 19.844 19.900 20.000 20.100 20.200 20.241 20.300

Dec. .6063 .6094 .6102 .6142 .6181 .6220 .6250 .6250 .6299 .6339 .6378 .6406 .6417 .6457 .6496 .6535 .6563 .6575 .6614 .6654 .6693 .6719 .6732 .6772 .6811 .6850 .6875 .6890 .6929 .6968 .7008 .7031 .7047 .7087 .7126 .7165 .7188 .7205 .7244 .7283 .7323 .7344 .7362 .7402 .7441 .7480 .7500 .7520 .7559 .7598 .7638 .7656 .7677 .7717 .7756 .7795 .7813 .7835 .7874 .7913 .7953 .7969 .7992

in. 39/64

5/8

41/64

21/32

43/64

11/16

45/64

23/32

47/64

3/4

49/64

25/32

51/64

mm 20.400 20.500 20.600 20.638 20.700 20.800 20.900 21.000 21.034 21.100 21.200 21.200 21.300 21.400 21.431 21.500 21.600 21.700 21.800 21.828 21.900 22.000 22.100 22.200 22.225 22.300 22.400 22.500 22.600 22.622 22.700 22.800 22.900 23.000 23.019 23.100 23.200 23.300 23.400 23.416 23.500 23.600 23.700 23.800 23.900 24.000 24.100 24.200 24.209 24.300 24.400 24.500 24.600 24.606 24.700 24.800 24.900 25.000 25.003 25.100 25.200 25.300 25.400

Dec. .8031 .8071 .8110 .8125 .8150 .8189 .8228 .8268 .8182 .8307 .8307 .8346 .8386 .8425 .8438 .8465 .8504 .8543 .8583 .8594 .8622 .8661 .8701 .8740 .8750 .8780 .8819 .8858 .8898 .8906 .8937 .8976 .9016 .9055 .9063 .9094 .9134 .9173 .9213 .9219 .9252 .9291 .9331 .9370 .9409 .9449 .9488 .9528 .9531 .9567 .9606 .9646 .9685 .9688 .9724 .9764 .9803 .9843 .9844 .9882 .9921 .9961 1.000

in.

13/16

53/64

27/32

55/94

7/8

57/64

29/32

59/64

61/64

31/32

63/64