Depliant Echo Led 2014 eng

Page 1

WATERPROOF FIXTURES Polycarbonate fixtures of the Echo series are IP66 water-resistant if installed at temperatures not exceeding 45°C. Direct exposure to sunlight can easily cause the temperature to exceed 45°C, which affects the degree of protection. However, it is recommended that these fixtures are used properly without altering their mechanical and protection properties (IP66); they should not be installed on surfaces subject to strong vibrations, outdoors on ropes or stakes; whenever this is necessary, waterproof steel fixtures should be used.

SELF-EXTINGUISHING

High mechanical resistancE

U.L.94 is a widely accepted USA flammability standard that classifies plastics according to how they burn. The ECHO fixture is made of V2 self-extinguishing plastic material: burning stops within 25 seconds. U.L.94 self-extinguishing class (U.L. = Underwriters Laboratories)

Glow wire test

Glow wire tested at 850°C.

High thermal resistancE * ENEC European Certificate of Conformity: PENDING APPROVAL

LED

• • • •

Power factor: ≥ 0.9 Colour rendering index: ≥ 80 Luminous flux maintenance 80%: 50000h (L80B20) Colour temperature: on request 3000K and 6000K


www.disano.it


w ns e n sio r e v

Echo LED No maintenance No glare More light and less energy consumption in two new versions:

Energy Saving High Performance www.disano.it


Echo LED

The high technological expertise achieved by the Disano Group in both the design and industrial manufacturing of lighting fixtures has resulted in the creation of a new watertight LED fixture. ECHO features a modern design that blends well into any type of setting.

Efficiency, energy saving and security

Housing: injection moulded, vandal resistant, UV-stablised RAL 7035 grey polycarbonate, high mechanical resistance.

• •

Diffuser: injection moulded V2 self-extinguishing, UV-stablised clear polycarbonate, prismatic inside for better light control. The smooth outside finishing facilitates cleaning.

• • •

Isolation class I. Quick connection with plug and socket, no need to open the fixture. Allowable ambient temperature : -30°C to + 40°C Photobiological safety class: Exempt group. Material compatible with food industry environments. Mounting is also possible at low or very low temperatures (instant start and no flux decay).

With LEDs and plug connector

Reflector: in galvanised steel, previously stove-enamelled with UV-stabilised polyester resin. Equipment: plug connector. On request: • narrow beam with sub-code -22. • continuous electric line connection: a through-line wiring arrangement and socket/ plug type connectors from the first of the last lighting fitting is required for this type of installation (Lighting fitting supplied on request sub-code 0072 at an extra charge). • water-proof lighting fitting on request with stainless steel latches to be ordered using sub-code 0077 at an extra charge.

Continuous line alignment

Perfect alignment of the lighting fittings is achieved using moulded guiding notches (supplied on request sub-code 0072 at an extra charge).

Standard steel mounting bracket

enables quick and easy installation of the fixture to ceiling surfaces.

Standard spring loop

allows quick connection to any chain suspension system.

ALL LIGHT: no glare The special surface finish of the diffuser allows light to escape, creating an “all light” effect. The fluted diffuser spreads light evenly without leaving dark areas.

Greater performance

The fixture is made with first-choice polycarbonate stabilised against UV light. It has been treated to eliminate glare without affecting performance.


Project comparison: old system

how to save over 60% on energy costs! One-to-one fixture replacement without changing the existing electrical system

example of lighting calculation fixtures 927 ECHO 1600mm 2X58W 2X58W

ballast electronic electronic magnetic

room 40m x 20m H 3.5m 40m x 20m H 3.5m 40m x 20m H 3.5m

LUX 340 324 324

Qty 50 50 50

Tot. P (W) 2614 5500 7000

927 Echo - energy consumption

-52%

-63%

compared to A2 2x58W electronic

compared to 2x58W magnetic ∆t55

Save more with presence detectors = instant start! continually turning lights ON and OFF does not damage LEDs like in fluorescent tubes

Installation examples

Energy Saving!!!


927 Echo LED - Energy Saving

* ENEC

92 IP66 IK08

97

102

v 115˚ 152 105˚

152 92

115˚ 105˚

102

97

95˚

95˚

85˚

85˚

75˚ 65˚

Total power consumption (W)

10 18 24

11 20 26.5

W

K - ølm - CRI

164701-07 164702-07

10 18 24

4000K - 1545lm - CRI≥80 4000K - 2780lm - CRI≥80 4000K - 3710lm - CRI≥80

code

grey grey grey

1.00 2.00 3.00

690 1300 1600

164700-00 164701-00 164702-00

97 97

92 92 IP66 IK08

152152

LED (Tj=25°C)

115˚ 105˚

115˚ 105˚

95˚

95˚

85˚

85˚

75˚

690/1300/1600 690/1300/1600

927 Echo 22 39.5 53

35˚

code

L

35˚

75˚

80

65˚

160

55˚

240

45˚

20 36 48

25˚

CLD CELL-E

weight

55˚

Total power consumption (W)

15˚

LED one-lamp

65˚

LED Wattage (W)

400 5˚ cd/Klm 5˚

CLD CELL

colour

* ENEC

45˚

320

35˚ 690/1300/1600 25˚ 15˚

102 102

LED Wattage (W)

55˚

240

45˚

927 Echo -

65˚

160

55˚

690/1300/1600

75˚

80

45˚

320 25˚

15˚

400 5˚ cd/Klm 5˚

15˚

25˚

35˚

LED two-lamps

CLD CELL

CLD CELL-E

LED (Tj=25°C)

colour

weight

L

code

code

W

K - ølm - CRI

grey grey grey

1.30 2.30 3.30

690 1300 1600

164703-00 164704-00 164705-00

164703-07 164704-07 164705-07

20 36 48

4000K - 3090lm - CRI≥80 4000K - 5560lm - CRI≥80 4000K - 7420lm - CRI≥80


957 Echo LED - High Performance

95˚ 85˚

75˚

55˚

240

45˚

45˚

320 25˚

15˚

400 5˚ cd/Klm 5˚

152

65˚

160

55˚

35˚

75˚

80

65˚

97

85˚

152 92

92 IP66 IK08

102

95˚

* ENEC

97

115˚ 105˚

102

115˚ 105˚

15˚

25˚

35˚

690/1300/1600

1300/1600

957 Echo -

LED one-lamp

CLD CELL

CLD CELL-E

LED (Tj=25°C)

colour

weight

L

code

code

W

K - ølm - CRI

grey grey

2.00 3.00

1300 1600

164711-00 164712-00

164711-07 164712-07

21 28

4000K - 3245lm - CRI≥80 4000K - 4325lm - CRI≥80

95˚

95˚

85˚

85˚

75˚

45˚

320 25˚

15˚

400 5˚ cd/Klm 5˚

152152

55˚

240

45˚

24 31

65˚

160

55˚

92 92 IP66 IK08

75˚

80

65˚

35˚

* ENEC

Total power consumption (W)

21 28

102 102

115˚ 105˚

97 97

115˚ 105˚

LED Wattage (W)

15˚

25˚

1300/1600 690/1300/1600

35˚

957 Echo -

LED two-lamps

CLD CELL

CLD CELL-E

LED (Tj=25°C)

colour

weight

L

code

code

W

K - ølm - CRI

grey grey

2.30 3.30

1300 1600

164714-00 164715-00

164714-07 164715-07

42 56

LED Wattage (W)

Total power consumption (W)

4000K - 6490lm - CRI≥80 4000K - 8650lm - CRI≥80

42 56

46 61


Project comparison: new system

High performance for great lighting! Save on energy and installation costs by reducing the number of lighting fixtures

example of lighting calculation fixtures 957 ECHO 1600mm 2X58W 2X58W

ballast electronic electronic magnetic

room 40m x 20m H 3.5m 40m x 20m H 3.5m 40m x 20m H 3.5m

LUX 320 324 324

Qty 40 50 50

Tot. P(w) 2440 5500 7000

957 Echo - energy consumption

-56%

compared to A2 2x58W electronic

-65%

compared to 2x58W magnetic ∆t55

Installation examples

High Performance!!!


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.