5 things you must avoid while taking care of pools

5 Things You Must Avoid While Taking Care of Pools Owning a commercial swimming pool is a serious investment that needs regular maintenance to operate smoothly. However, due to lack of knowledge, many commercial pool owners make common swimming pool mistakes, like, add too much chlorine before any clients’ party, not to test pool water weekly, avoid to consult with their swimming pool management firms regarding the maintenance of the pool.

Here are the things that you must avoid while taking care of pools. 

Shocking Pool during Day: Shocking pool helps you to get rid of organics from your water and kill off algae.

It also helps to get rid of the chloramines. This process is effective when you do it in night. During day, the sun will burn off 1 ppm (part per million) chlorine in each hour. However, if you shock at night the sun can’t burn off the chlorine.



Not brushing your pool: Many of you think that by vacuuming pool, you can keep it from getting dirty.

This is not only thing which make your pool completely clean. You need to brush hard areas which cannot be covered in vacuuming process. Use pool brush to clean steps, area behind ladders, and corners. This does not allow algae to grow in your pool.



Avoid to use calcium hardness in pool water:

It is important to keep your pool water hard in order to prolong the life of vinyl liner, concrete, plaster, fiberglass, and filter system. To achieve this, you need to add calcium once at the beginning of the every season. It is important to use good quality of calcium which you can get from firms who offer aquatic management services or pool management services. Despite adding it, you have to keep an eye on this throughout the season as pool water can loss calcium in your water due to evaporation. 

Ignoring the water level: Having unbalanced water can damage your pool. According to the aquatic facility management professionals, if water level drops below the skimmer, pool pump will draw in air instead of water and start to run dry. If it continues for a long time, it can cause overheating and actually melt your pump’s housing.



Ignoring pH and alkalinity levels: Low PH and alkaline water level means the pool water is very acidic. However, in this situation, pool water looks very clear, so it is difficult to notice the problem. Low PH level can damage your equipment including pool filter and pump, vinyl liner, heater, automatic cleaner, chemical feeder, solar blanket. You get a test kit from pool companies which help you to check the level of PH and alkaline water. If you want to learn more about the pool maintenance, you can visit to http://usamanagement.com/.