Common Pool Pump Problems and How to fix them?
Whether it is a commercial or residential pool, the pump is one of the most important elements of your pool’s circulation and filtration system. It actively works in removing debris and dirt. Aquatic management services provider says that pool pump creates a pressure inside the pool which leads to pass water through filter. This way, the water in your pool will get purified. In this way, pool pump plays an important role in keeping your pool water clean and fresh. So, it is necessary to take care of your pool pump in a proper way. If you fail to maintain your pool, it may lead pool pump to stop functioning properly. You can hire swimming pool management firm who helps you to ensure the smooth functioning of pool.
Here are some common pool problems and tips for fixing them. Making a Noise: Noisy pool pump is irritating. This annoying sound creates due to vibrating pump. In this case, you need to check screws of the pump. If you find any loose screw, tighten it immediately. While examining the pump, if you find a gap between the base and the pump itself; fill the gap with rubber mat or pad. This will help you to stop vibration. Insufficient supply of water to the pump within a particular timeframe can cause cavitation. This type of loud noise usually stops on its own after a particular time period. The Pool Pump Unable to Pull Water: If pool pump doesn’t pull pool water, you need to check to find out if anything stuck in the pump or skimmer basket. Mud and dirt accumulate on the surface of the pool. Having a dirt in a great volume affects the flow of water and therefore, pool pump stop pulling water. In this case, aquatic facility management professionals advise to clean the baskets to remove the mud. Also, check pump impeller. It is connected to the motor and keeps the water flowing. However, any dirt between the impeller can cause it to jam. To cope up with this problem you need to open the pump and clear away all debris. Pump stop to work: Due to loose connection, lack of electricity, voltage fluctuations, and a blown fuse can lead pump to stop working. You need to check all sources of power supply to find the exact cause. If all things are ok, then you may have to consider other possibilities. Pump turns off itself: Apart from this, due to overheating the pool pump turn off itself. Due to high temperature in summer, it happens. Swimming pool operators advise to use pump cover to reduce its exposure to the sun. These details should be sufficient to help you to fix common pool pump problems. However, seek help from a professional if the problem is bigger than you expected.