2005/2006
Strahman Valves, Inc.
Corporate Profile
Headquartered in Bethlehem, PA USA, Strahman Valves is a worldwide leader in the manufacture of high quality Wash Down Equipment and Industrial Valve products. Since its inception in 1921, the Company has earned a reputation for reliable products that provide superior performance, innovative solutions to complex problems and long-term reliability. Strahman has become known as the standard for numerous industries including the chemical, petrochemical, polymer, biotechnology, pharmaceutical, food processing, beverage, dairy, mining as well as the pulp and paper. With facilities in the United States, France, the U.K. and Germany, coupled with an extensive network of Distributors and Agents on every continent, Strahman is well positioned to serve the needs of its customers throughout the world. Our trained agents and distributors provide local service and support to customers worldwide whenever required. With ISO 9001:2000 certification at our production facilities, Strahman Valves has the capability to design, produce, assemble and test a wide variety of high quality sophisticated industrial valves and wash down equipment. Industrial Valves Strahman pioneered the free-flowing, non-clogging piston tank bottom valve and established itself as a worldwide leader of sampling valves and sampling systems. Today, we offer a full range of both cast and fabricated valves ranging from -330oF / -200oC to over 1,500oF / 815oC and pressures ranging from vacuum to 9,000 psi / 630 bar. Materials of construction include carbon steel, stainless steel (316, 316L, 316Ti, 304, 304L, 2205 (Duplex), 347, Alloy 20), Hastelloy B, Hastelloy C, Monel, Inconel, Titanium and Zirconium. Strahman technology includes metal to metal seals as well as seatless sealing technologies. Other valve products include Spray Rinse Valves for reactors, Piston and Disc Diverter Valves, Rotating, Sliding, Spreading and Non-spreading Line Blinds, Cartridge Ball Valves, Rising and Lowering Disc Valves, Metal Seated Butterfly Valves, Disc and Piston In-Line Valves and Pipe Valve assemblies. Wash Down Equipment Strahman’s entry into the wash down equipment market began with its involvement with the Dairy Industry. Recognizing a need for a unit that could distribute hot water for facility clean up, Strahman engineers developed the first steam and cold water mixing unit. This led to the further development of mixing units that distribute hot and cold water as well as thermostatically controlled units. Having gained a reputation in this area, Strahman then focused its efforts to develop a complete line of industrial spray nozzles, hoses. Today, Strahman’s Wash Down Equipment has become the standard of virtually every industry requiring precise temperature control, long-lasting and trouble-free wash down systems. Strahman’s current product line includes single line hose bibs, mixing units for hot and cold water, steam and cold water, stainless steel cabinets, Pre-rinse spray nozzles, a wide array of industrial spray nozzles, industrial hoses, FDA approved hoses, hose racks, hose reels, stainless steel jacketed transfer hoses and fittings, Teflon lined hoses, and special application hoses.
Table of Contents . . . . . . . . . . . . . . . . . . . . .Page
Table of Contents Cont. . . . . . . . . . . . . . . . . .Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 M-5000/M-5700 Unit (Wall-Mounted), Flow Chart (Steam & Cold Water) . . . . . .2-3 M-5000/M-5700 Unit (Recessed-Pedestal) . . . . . . . . . . . . . . . . .4-5 M-159TM - M-750TM (Wall-Mounted) (Hot & Cold Water) .6-7 M-159TM - M-750TM (Recessed) . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 M-159TM - M-750TM (Pedestal) . . . . . . . . . . . . . . . . . . . . . . . . .10-11 Flow Chart, M-159TM - M-750TM . . . . . . . . . . . . . . . . . . . . . . . . .12 CEC-1000 - Completely Enclosed Cabinet . . . . . . . . . . . . . . . . . .13 M-120 / M-156N / M-756 (Wall-Mounted) (Hot or Cold Water) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15 M-156N / M-756 (Recessed-Pedestal) . . . . . . . . . . . . . . . . . . .16-17 M-5000-TS -Thermostatically (Steam & Cold Water) Controlled Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
M-200-TS -Thermostatically (Hot & Cold Water) Controlled Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21 Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-24 Hose Reels (Carbon Steel/Stainless Steel) . . . . . . . . . . . . . . . .25-26 Nozzle Series (See “New”P-70, Mini M-70) . . . . . . . . . . . . . . .27-30 Nozzle Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Hose Adapters/Swivel Adapters/Swivel Pro/ Ergonomic Hose Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33 Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 3/4”Control Valves / Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 3/4”Valve Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Auto/Manual Steam Traps /MP-88 Mounting Plate . . . . . . . . .37 HR-100/HR-100 (L) Hose Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
See Our New Products Page VISIT VISIT US US ON ON THE THE WEB WEB AT: AT:
www.strahmanvalves.com www.strahmanvalves.com
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations
Introduction: Strahman began providing the dairy and food processing industries with durable, reliable mixing units and hose stations more than eight decades ago. Today, these sturdy pieces of equipment can be found in many manufacturing plants and processing industries, including food, beverage, pharmaceutical and others, where fast and effective cleanup is necessary. As a single unit, Strahman’s mixing unit-hose stations produce wash water from the following sources: • Instant hot water from steam and cold water (M-5000/M-5700 Series) • Blended hot and cold water (M-159/M-750 Series) • Hot or cold water (M-156N/M-756/M-758/M-358 Series) Standard Strahman mixing units are constructed from bronze with internal parts of stainless steel. Most models are also available chrome-plated or made entirely of stainless steel. Stainless steel mixing units and hose stations will not discolor, are easy to clean and are ideal for use in special water applications, including those using ionized or purified water. Strahman makes mixing units in four practical types to meet your particular needs: • Wall-Mounted • Recessed • Pedestal • Cabinet Most Strahman mixing units-hose stations come with a temperature-indicating gauge as an option. Temperatureindicating units include an accurate dial-type gauge that displays, in both Celsius and Fahrenheit, the wash water’s exact temperature; users can easily adjust the temperature by turning the unit’s valves. Most Strahman mixing units come standard with: • Stainless steel hose rack • 50 feet of high pressure water hose • Automatic, water saver spray nozzle • Check valves to prevent pressure from backing up in the steam and water lines if a kink develops or the hose becomes clogged All Strahman units are exceptionally durable, economical, require little maintenance and mount easily anywhere steam and/or water lines are available. • Maximum recommended operating temperature for Strahman mixing units-hose stations, and all Strahman products: 200˚F/93˚C • Maximum working pressure: 150 psi Several hose lengths, hose types and nozzle options are available. Most mixing units are available with globe or angle valves. Consult your Strahman sales representative for details.
Unit Shown: M-5000 with Strahman Hose Assembly A in White and chrome plated fittings
Note: Also available with ball valves. “The Strahman equipment really holds up. The products do not have to be replaced often, which helps with our budgeting. The customer service is great, too. Mainly, the equipment holds up. It’s strong... you install it and forget it. For plant engineers that’s great, because you don’t have to worry about purchasing new equipment each year.” Ron, Director of Safety, Dairy
Steam and Cold Water Wall Mounted
Mixing Units-Hose Stations
M-5000* and M-5700 (All Stainless Steel) Wall Mounted Series for Steam and Cold Water These units produce hot water instantly from a steady supply of steam and cold water. All mixing units-hose stations in the M-5000/M-5700 series are equipped with a dial-type gauge that indicates the wash water’s exact temperature. Users can easily regulate the temperature by turning the unit’s steam and cold water valves. As an added safety measure, these units shut off their steam source automatically if the cold water supply falls below 50 psi for any reason. This prevents hazardous steam from exiting the unit and causing steam burns. Please review the chart below before purchasing an M-5000/M-5700 unit REQUIRED STEAM MODEL NUMBER M-5000 L55 M-5000 M M-5000 H
REQUIRED STEAM PRESSURE5 80-95 LBS. 96-130 LBS. 131-150 LBS.
REQUIRED WATER PRESSURE5 50-80 LBS. 50-80 LBS. 50-80 LBS.
GPM 5-7 4 1/2 - 6 4 1/2 - 6
*The M-5000 unit is available in bronze or bronze chrome-plated material.
55Standard unit supplied. 5Required at installation site to ensure proper operation of mixing unit.
Unit Shown: M-5700 unit complete
Wall-Mounted Series for Steam and Cold Water Strahman’s wall-mounted, temperature-indicating, instant hot water mixing unit is designed to mount one inch away from the walls for easy cleanup. Units come complete with spacers, complete mounting instructions and 3/8-inch studs for easy mounting. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi PARTS LIST Part No. 1 2 3 4 5 6 7 8 10 11 12 13† 18 19 20 21 22 25 26 27 28 29 30 31** 32 33 34 35 36*
Part Body (includes Parts 6 and 7) Hose Rack Cap Screw (not shown) Hose Rack Lock Washer (not shown) Hose Rack Connector (not shown) Steam Poppet (L, M, H) Steam Jet Poppet Seat Hose Rack (not shown) Spacer (not shown) Wall Plate (not shown) Ball Check Union Nut Ball Check Valves (includes Part 36) Water Chamber Water Chamber Housing (includes Part 35) Poppet Guide Poppet Guide Nut Body Nut Set Screw Poppet Spring Guide Extension Pusher Grommet Gauge Holder Temp Gauge Blending Chamber Grommet Lock Screw Lock Screw Holder “O” Sealing Ring for Water Chamber Housing Ball Check Gasket
M-5000 Material Bronze Stainless Steel Stainless Steel Brass Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Brass Brass Brass/Stainless Steel Aluminum Silicone Bronze Stainless Steel Brass Brass Brass Bronze Stainless Steel Stainless Steel Stainless Steel Stainless Steel Rubber Bronze Chrome Bronze Stainless Steel Stainless Steel E5 15-80-2Q75 Copper, Teflon® Coated
M-5700 Material SST 316 SST 304 SST 410 SST 303 SST 303 SST 416 SST 304 SST 302 SST 416 SST 304 SST 304 SST 303 SST 303 SST 304 SST 304 SST 303 SST 303 SST 304 SST 302 SST 416 SST 303 Rubber SST 304 Plated Brass SST 303 SST 303 SST 304 EPMD Graphite
Adjustable Needle **
† Sold as a complete unit. See page 35 for control valve parts. Contact Strahman for service bulletin. * Teflon® is a registered trademark of E. I. DuPont de Nemours and Company. * *Temperature gauge: 40-120˚C/100-250˚F.
2
CAUTION: If overheating of water should occur due to restrictions in lines or pressure fluctuations, make adjustment to steam valve to lower temperature.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-5000 (Bronze*) Wall-Mounted/M-5700 (Stainless Steel) Wall-Mounted Dimensions
**
**See page 2 for temperature ranges Note: Front view shown with Globe Valves.
*Available : bronze chrome plated
WATER PRESSURE PSIG
STRAHMAN STEAM-WATER MIXER M5000 / M5700 SERIES
*Minimum pressures shown in heavy black line.
HOW TO READ CHART: To get GPM flow from the unit use (water pressure P.S.I.G.) indication above. From 50 PSIG water go to first curve and move to bottom of the chart which shows (GPM). This would indicate that the flow would be 7 GPM. To get the temperature of water through the unit 50 PSIG water pressure and move to 80 PSIG steam pressure where the lines intersect move to bottom of chart (temperature rise F). This would indicate that the temperature rise would be 112째 F. Add to this the inlet water temperature and this would indicate the temperature of hot water you may expect to get from the unit. To read the temperature rise correction chart use the inlet water temperature (50) move to bottom of chart and compute (.98). Multiply this times the temperature rise F as shown above.
MP-88 stainless steel mounting plate is standard on M-5700 and optional on M-5000. Refer to page 31.
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 3
Steam and Cold Water Recessed and Pedestal
Mixing Units-Hose Stations
M-5000 and M-5700 (All Stainless Steel) Recessed/Pedestal Series for Steam and Cold Water Recessed Series for Steam and Cold Water Strahman’s recessed, temperature-indicating, instant hot water makers are designed to conceal mixing unit piping in a stainless steel box for recessed wall mounting. All exposed parts are either bronze chrome-plated or stainless steel depending on the selected unit. These units are ideal for new construction or other places where concealed piping and good looks are desirable. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi Note: When Ordering, specify angle valves (back entry) or globe valves (top entry).
Unit Shown: Recessed M-5000 with Strahman Hose Assembly A in Red
Pedestal Series for Steam and Cold Water Strahman’s pedestal-type, temperature-indicating, instant hot water makers can be mounted anywhere floor piping is available. The pedestal tube, head and cover are ruggedly constructed of stainless steel, while the mixing unit is bronze chrome-plated or stainless steel, making it ideal where efficiency and good looks are desired. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi
Unit Shown: Pedestal M-5000 chrome plated with Strahman Hose Assembly Y (yellow) with Hydro-Pro 150 ® spray nozzle
4
CAUTION: If overheating of water should occur due to restrictions in lines or pressure fluctuations, make adjustment to steam valve to lower temperature.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-5000 (Bronze/Chrome) Recessed/M-5700 (All Stainless Steel) Recessed Dimensions (Recessed Box Standard Stainless Steel)
M-5000 (Bronze/Chrome) Pedestal/M-5700 (All Stainless Steel) Pedestal Dimensions (Pedestal Head, Tube and Base Standard Stainless Steel)
*
Contact Strahman for service bulletin. * Temperature Gauge: 40-120ËšC 100-250ËšF Note: Refer to Page 2 for Spare Parts List.
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 5
Hot and Cold Water Wall-Mounted
Mixing Units-Hose Stations
M-159* and M-750 (All Stainless Steel) Wall Mounted Series M-159TM and M-750TM (All Stainless Steel)Wall Mounted Series Strahman’s mixing units-hose stations for hot and cold water are designed to thoroughly mix hot and cold water in any desired proportion. They’re available in both standard models (M-159) and models made completely of stainless steel (M-750). All exposed parts are either bronze chrome plated or stainless steel depending on the unit selected. Our Temperature Indicating (TM) models (M-159TM & M-750TM) are equipped with a dial-type gauge that accurately indicates the wash water’s temperature. They also feature a specially designed blending chamber to thoroughly blend hot and cold water. *The M-159 model is available in bronze or bronze chrome-plated material.
Wall-Mounted Series for Hot and Cold Water Wall-mounted unit is designed to mount one inch away from the walls. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi • Operable on normal city water pressure (see flow chart, page 12)
Unit Shown: M-159TM with Strahman Hose Assembly A in Black
PARTS LIST Part No. 1 2 3 4 6 8 10 11 12 13* 13 20 21 22 36 36
Part Body Cap Screw Lock Washer Connector Sleeve Anchor (Not shown) Hose Rack Spacer Wall Plate (Not shown) Union Nut Ball Check Valve (Includes Part 36) Flat Check Valve (Includes Part 36) Union Gasket (Not shown) Union Tail Piece (Not shown) Inlet Union Nut (Not shown) Ball Check Gasket Check Valve Gasket (Not shown)
M-159 Material Bronze SST 304 SST 410 Brass SST 304 SST 304 SST 302 Brass Brass Brass/Stainless Steel Brass/Stainless Steel
M-750 Material SST 316 SST 304 SST 410 SST 303 SST 304 SST 304 SST 302 SST 303 SST 304 SST/Inconnel Non Asbestos SST 303 SST 303
Copper, Teflon Coated Non Asbestos
Order by name and number. *Sold as a complete unit. See page 35 for control valve parts.
Note: Intended for water use only. . . Not suitable for steam service. 6
MP-88 stainless steel mounting plate is standard on M-750 and optional on M-159 series.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-159 (Bronze*) Wall-Mounted/M-750 (Stainless Steel) Wall-Mounted Dimensions
Note: Front view shown with Globe Valves.
M-159TM (Bronze*) Wall-Mounted/M-750TM (Stainless Steel) Wall-Mounted Dimensions
**
Note: Front view shown with Globe Valves. **Temperature Gauge: 20-100ËšC/60-220ËšF.
* Available bronze chrome plated
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 7
Hot and Cold Water Recessed
Mixing Units-Hose Stations
M-159 and M-750 (All Stainless Steel) Recessed Series M-159TM and M-750TM (All Stainless Steel)Recessed Series Recessed Series for Hot and Cold Water Strahman’s recessed mixing units-hose stations for hot and cold water are designed to conceal mixing unit piping in a stainless steel box for recessed wall mounting. The entire mixing unit, with exception of the handwheels and valve bonnets, is covered with a removable stainless steel plate. All exposed parts are either bronze chrome plated or stainless steel depending on the unit selected. These units are ideal for new construction or other places where concealed piping and good looks are desirable.
Unit Shown: Recessed M-159TM with Strahman Hose Assembly A in Red
• Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi • Operable on normal city water pressure (see flow chart, page 12) Note: Custom enclosures available for surface mounting and/or inclusion of auxiliary equipment. Note: When ordering, specify angle valves (back entry) or globe valves (top entry). Note: For Parts see page 6
MODEL M-159 Recessed
MODEL M-159TM Recessed
*
* Note: Temperature Gauge: 20-100˚C/60-220˚F.
Note: Intended for water use only. . . Not suitable for steam service. 8
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-159 (Bronze/Chrome) Recessed/M-750 (All Stainless Steel) Recessed Dimensions (Recessed Box Standard Stainless Steel)
M-159TM (Bronze/Chrome) Recessed/M-750TM (All Stainless Steel) Recessed Dimensions (Recessed Box Standard Stainless Steel)
*
*Note: Temperature Gauge: 20-100ËšC/60-220ËšF.
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 9
Hot and Cold Water Pedestal
Mixing Units-Hose Stations
M-159 and M-750 (All Stainless Steel) Pedestal Series M-159TM and M-750TM (All Stainless Steel)Pedestal Series Pedestal Series for Hot and Cold Water Strahman’s pedestal-type mixing units-hose stations for hot and cold water can be mounted anywhere floor piping is available. The unit’s pedestal tube, head and cover are ruggedly constructed of stainless steel, while the mixing unit is completely bronze chrome-plated or stainless steel, making it ideal where efficiency and rugged construction are desired. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi • Operable on normal city water pressure (see flow chart, page 12) Note: For parts, see page 6. Unit Shown: Pedestal M-159TM chrome plated with Extruded Hose Assembly Y (yellow) with Hydro-Pro 150® spray nozzle
MODEL M-159 Pedestal
MODEL M-159TM Pedestal
*
*Note: Temperature Gauge: 20-100˚C/60-220˚F.
Note: Intended for water use only. . . Not suitable for steam service. 10
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-159 (Bronze/Chrome) Pedestal/M-750 (All Stainless Steel) Pedestal Dimensions (Pedestal Head, Tube and Base Stainless Steel)
M-159TM (Bronze/Chrome) Pedestal/M-750TM (All Stainless Steel) Pedestal Dimensions (Pedestal Head, Tube and Base Stainless Steel)
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 11
M-159/M-750 Flow Chart / Stainless Cabinet
Mixing Units-Hose Stations
The M-159/M-750 (All Stainless Steel) Hot and Cold Water Mixer Series Flow Chart
Example: Available Pressure -50 psig, 60 psig. @50 psig Use “0” psig Curve to Get 7 gpm Total Flow @60 psig Use “0” psig Curve to Get 7.5 gpm Total Flow To Get Hot Water gpm Flow Through Unit: 1. 50 psig Hot Water 50 psig Cold Water
3.5 gpm Hot Water 3.5 gpm Hot Water
7 gpm Total Flow
2. 50 psig Hot Water 60 psig Cold Water
2.75 gpm Hot Water 4.25 gpm Cold Water
7 gpm Total Flow
3. 60 psig Hot Water 50 psig Cold Water
4.5 gpm Hot Water 3.0 gpm Cold Water
7.5 gpm Total Flow
“I’ve used Strahman equipment for the past 21 years. Strahman stands by their equipment, providing customer service and technical assistance we can count on.” Mike, Associate Director, Pharmaceutical Industry
Instructions for Computing Above: To get the gpm flow from the unit, use the hot water pressure psig indication shown above. From 50 psig hot water go to the “0” psig curve and move to the bottom of the chart, which shows maximum water flow gpm. This would indicate a flow of 7 gpm. To get the gpm of hot water being used through the unit, go to 50 psig hot water pressure and move to 50 psig cold water pressure. Drop to maximum water flow gpm. This would indicate 3.5 hot water gpm, 3.5 cold water gpm for a total of 7 gpm. Keep in mind, if you increase the cold water pressure you decrease the hot water gpms.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com 12
Mixing Units-Hose Stations
CEC-1000 Series Completely Enclosed Cabinet Recessed Wall-Type Station Strahman’s CEC-1000 stainless steel cabinets keep mixing units and hoses out of the way and free from dust. Any standard Strahman wall-mounted, mixing unit-hose station can be installed in this spacious cabinet, which is designed with flush hinges to allow the unit’s large double doors to swing open 180°, making it easy to access and clean the enclosed unit. INDIVIDUAL UNIT SPECIFICATIONS FOR CABINET MOUNTING ARE AVAILABLE UPON REQUEST. • Maximum recommended operating temperature: 200˚F/93° C • Maximum working pressure: 150 psi Note: When Ordering, specify angle valves (back entry) or globe valves (top entry).
CEC-1000 Dimensions
Note: Shown: M-5000 Unit with Hose Assembly enclosed in cabinet above. * Temperature Gauge: 40-120˚C/100-250˚F. Note: Custom enclosures available for surface mounting and/or inclusion of auxiliary equipment.
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 13
Hot or Cold Water Wall-Mounted
Mixing Units-Hose Stations
M-156N* and M-756 (All Stainless Steel) Wall Mounted Series These hot or cold water hose stations are designed for use wherever hose service is required. The compact units include a single control valve, stainless steel hose rack and mounting attachments. Wall-mounted unit is designed to mount one inch away from the wall. *The M-156N model is available in bronze or bronze chrome-plated material.
Wall-Mounted Series for Hot or Cold Water • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi
M-120 Hose Station The M-120 Wall Mounted Hose Station is made of Stainless Steel and comes with (2) 1/2” stainless steel Wall Mounting Bolts and Zinc plated steel Anchors for strength and durability. • 3/4” Full Port 316 Stainless Steel Ball Valve, PTFE Packing • Stainless Steel Hose Rack • Stainless Steel 1/2" Wall Mounting Bolts • Stainless Steel 1/4 Turn On-Off Valve for ease of operation • Zinc Plated Steel Anchors Unit Shown: M-756 with mounting plate, Strahman Hose Assembly S in Red
Model M-120 Dimensions
PARTS LIST
Note: Intended for water use only. . . Not suitable for steam service. 14
Part No.
Part
Material
1 2 3 4 5 6
Ball Valve Bracket Hose Rack Connector Hose Rack Hose Rack Spacer 1/2"Bolt
316 SST 304L SST 303 SST 302 SST 303 SST 18-8 SST
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-156N (Bronze*) Hose Station/M-756 (All Stainless Steel) Hose Station Wall-Mounted Dimensions
Model M-156N Hose Station
*Available Bronze Chrome plated
PARTS LIST Part No. 1 2 3 4 6 8 10 11 20 21 22
Part Body Cap Screw Lock Washer (Not shown) Connector Sleeve Anchor (Not shown) Hose Rack Spacer (Not shown) MP 88 Mounting Plate (Not shown) Union Gasket Union Tail Piece Inlet Union Nut
M-156N Material Bronze SST 304 SST 304 Brass SST 302
M-756 Material SST 316 SST 304 SST 410 SST 303 SST 304 SST 302 SST 303 SST 304 Non Asbestos SST 303 SST 303
MP-88 stainless steel mounting plate is standard on M-756 and optional on M-156N. Refer to page 37.
Note: For Parts 20, 21, 22 see page 35. Order by name and number.
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 15
Hot or Cold Water Recessed and Pedestal
Mixing Units-Hose Stations
M-358 and M-758 (All Stainless Steel) Recessed/Pedestal Series Designed for use where concealed piping and attractive appearance are required, these hose stations produce hot or cold water. The compact unit includes a single control valve, stainless steel hose rack, and mounting attachments.
Recessed Series for Hot or Cold Water Recessed wall-type hose station is enclosed in a stainless steel box for easy mounting. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi Note: When ordering, specify angle valve (back entry) or globe valve (top entry). Unit Shown: Recessed M-358
3/4” NPT
Pedestal Series for Hot or Cold Water Strahman’s pedestal-type hose stations for hot or cold water can be mounted anywhere floor piping is available. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi
Note: Intended for water use only. . . Not suitable for steam service. 16
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations M-358 (Bronze/Chrome) Recessed/M-758 (All Stainless Steel) Recessed Dimensions (Recessed Box Standard Stainless Steel)
M-358 (Bronze/Chrome) Pedestal/M-758 (All Stainless Steel) Pedestal Dimensions (Pedestal Head, Tube and Base Standard Stainless Steel)
NOTE: To ensure proper performance, we recommend that a standard Strahman Hose Assembly be used with these products. 17
Steam and Cold Water Thermostatically Controlled
Mixing Unit-Hose Stations
Thermostatically Controlled Mixing Unit – Model M-5000-TS Safe, automatic control over steam and cold water! The Model M-5000-TS lets you combine steam and cold water to produce hot water efficiently – without the safety concerns normally associated with steam use. Allowing for a maximum water temperature of 200°F, the automatic unit includes an easy-to-use temperature gauge that senses even slight variations to monitor water temperature accurately. The M-5000-TS unit’s thermostatically designed safety shutoff valve prevents the unit from overheating, and the thermostat is hydraulically formed, liquid-filled bellows. Strahman also offers its new M-5000-TS Conversion Kit, which will retrofit the original M-5000 mixing unit to provide the same operating ranges and temperatures, as well as a thermostat that prevents temperature fluctuations. Backed by Strahman’s two year warranty.
Features: • Thermostatically designed safety shutoff valve prevents unit from overheating • Automatically compensates for water pressure fluctuations to maintain desired temperature setting • Thermostat is hydraulically formed, liquid-filled bellows • Removable parts for easy cleanup and inspection • Unit and conversion kit are both easily installed • All bronze body with bronze, brass and stainless steel internal parts • Maximum water temperature of 200°F/93°C • Minimum water temperature of 100°F/38°C • Maximum working pressure of 150 psi for steam and 80 psi for cold water • Minimum working pressure of 80 psi for steam and 50 psi for cold water
Unit Shown: M-5000-TS Unit shown with optional M-88 Mounting Plate
Note: Intended for water use only. . . Not suitable for steam service. 18
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Mixing Units-Hose Stations Thermostatically Controlled Mixing Unit – M-5000-TS Dimensions Part No.
56
21
Qty. 2
2 3
BALL CHECK GASKET O-RING WATER CHAMBER HOUSING
2 1
4
WATER CHAMBER
SST
1
5
STEAM JET
SST
1
6
O-RING STEAM JET
EPDM
1
7 8
SST EPDM
1 2
SST EPDM
1 1
EPDM
1
12
ACTUATOR SLEEVE O-RING BLENDING CHAMBER SPRING O-RING THERMOSTAT HOUSING O-RING STEAM ADJUSTER O-RING POPPET STOP
13
POPPET SPRING
11
13
Material
BALL CHECK VALVE ASSY. BRASS/SST
9 10
30
Part
1
COP/TFE EPDM
EPDM
1
SST
1
14
GUIDE EXTENSION
SST
1
14A
3/4” HEX NIPPLE
BRASS
1
15
PUSHER
SST
1
16
POPPET
SST
1
16A
ACTUATOR PIN
SST
1
17
SEAT
SST
1
18
STEAM INJECTOR
SST
1
19
DIFFUSER SCREEN
SST
1
POPPET SEAT TOOL
SST
1
14A
16A
50
POPPET TOOL
SST
1
COPPER
1
BRONZE/SST
2
HANDLE SCREW
STEEL
1
THERMOSTAT HOUSING
BRASS
1
26
THERMOSTAT ADJUSTER
SST
1
30
LOCKNUT
SST
1
39
TS BODY
BRONZE
1
44
THERMOSTAT
BRASS
1
46
CONTROL KNOB
PLASTIC
1
50
SUPPORT PLATE
SST
1
56
UNILEVER
SST
1
20
44
39 26 24
46
20
TUBE ASSEMBLY
21
BALL VALVE
22 24
22
Note: See Page 2 for Additional Parts.
If overheating of water should occur due to restrictions in lines or pressure fluctuations, make adjustment to steam valve to lower temperature.
19
Hot and Cold Water Thermostatically Controlled
Mixing Units-Hose Stations
Thermostatically Controlled Mixing Unit – Model M-200-TS Precision control over hot and cold water! The Model M-200-TS features rugged construction and superb quality for superior thermostatic control. The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature desired – from 80°F to 160°F. With its durable bronze body construction, the M-200-TS valve features replaceable components that resist corrosion. Both the piston and liner are made of stainless steel material for long-lasting reliability. The unit also includes an integral shutoff valve. Backed by a one year warranty.
Features:
1/2” Low-Flow Unit—Low-Flow rate: 5-7 GPM
• Precise temperature control from 80°F/27°C to 160°F/71°C • Adjustable temperature limit stop for maximum safety • Replaceable components facilitate servicing • Maximum water temperature of 160°F/71°C • Maximum working pressure to 125 psi • Senses and compensates for temperature or pressure fluctuations (up to a 50% drop in inlet supply pressure) • Maintains temperature to +/–3˚F • Inlet piping: 3/4" ball valves on 6" centers • Color coded temperature dial • Bronze and stainless steel construction, bronze chrome plated available Thermostat: • Senses slight pressure fluctuations • Is a hydraulically formed, liquid-filled bellows • Is linear in its expansion and exerts the highest possible operating force directly to the valve piston • Must have a minimum 15˚F differential between hot and cold inlet and outlet set temperature
3/4” High-Flow Unit—High-Flow rate: 10-12 GPM
Note: Intended for water use only. . . Not suitable for steam service.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com 20
Mixing Units-Hose Stations Thermostatically Controlled Mixing Unit – M-200-TS Dimensions Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16* 17 18
Part UNILEVER BALL VALVE CHECK VALVE † UNION NUT GASKET CHECK VALVE ADAPTER MIXING VALVE CONTROL KNOB STREET ELBOW U-BOLT #10 NUT MOUNTING PLATE NIPPLE TEMPERATURE GAUGE TEE HOSE ASSEMBLY Y SWIVEL-PRO ADAPTER HYDRO-PRO 150®NOZZLE
Material Qty. SST 1 SST 2 CR PLATED BRS 2 CR PLATED BRS 2 COP/TFE 2 CR PLATED BRS 2 CR PLATED BNZ/SST INT 1 NYLON 1 CR PLATED BRS/SST 2 SST 1 SST 2 SST 1 CR PLATED BRS/SST 1 SST 1 CR PLATED BRS/SST 1 CR PLATED FITTINGS 1 BRASS/PLASTIC 1 SST/BRS/NYLON 1
* Hose Assembly “Y“ is standard with #21S swivel adapter and M-70 spray nozzle.
Note: Drawing shown with optional “ergonomic package“ Hydro-Pro 150® spray nozzle and Swivel-Pro adapter on lightweight extruded hose.
UNIT ONLY FLOW FLOWCAPACITIES CAPACITIES SINGLE SINGLE STAGE STAGE (NO HOSE) 70 60 50 45 40 35 30
2" HI G
H
25 20
1/
PRESSURE DROP, POUNDS PER SQUARE INCH
† Drawings shown with optional check valve.
15
10 9 8 7 6 5 1
2
3
4
5
6
7
8 9
10
15
20
30
35
FLOW OF WATER, GALLONS PER MINUTE
If overheating of water should occur due to restrictions in lines or pressure fluctuations, make adjustment to steam valve to lower temperature.
21
Hoses
Hoses
Strahman Hose Assemblies Strahman has been supplying industrial strength hoses since 1921. We combine years of solid craftsmanship and innovative new solutions to offer hoses that are safe, reliable, durable, and easy to maintain. All Strahman hoses are assembled with bronze, bronze chrome-plated, or stainless steel fittings. Some hoses include stainless steel internal spring assemblies on one or both ends for added durability and extended hose life. Hose I.D. Colors Temperature Maximum Description Available Rating Working Pressure 3/4” - Extruded Red Minus 20 - 200 d.F. 300 PSI 5/8” - Extruded Black, Yellow, White Minus 20 - 200 d.F. 300 PSI 1/2” - Extruded Red Minus 30 - 190 d.F. 500 PSI 5/8” - Premium Wrapped Red, White Minus 20 - 200 d.F. 300 PSI 5/8” - Premium Wrapped Black Minus 20 - 200 d.F. 300 PSI 5/8” - Microban Yellow Minus 20 - 200 d.F. 300 PSI Note: When used with mixing unit hose stations the maximum pressure rating will be 150 PSI.
Minimum Burst 1,500 1,500 2,000 1,500 1,500 1,200
Use/Rating Code A B C D E F
USE/RATING CODES: A: USE - Excellent oil and abrasion resistance, good chemical resistance. RATING - General Purpose hose for Water & Air. B: USE - Excellent abrasion resistance, oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air with FDA approved tube. C: USE - Oil and fat resistance. RATING - High pressure wash down for Food and Pharmaceutical plants. D: USE - Oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air with FDA approved tube. E: USE - Oil, fat and chemical resistance. RATING - General Purpose hose for Food, Water & Air. F: USE - Anti-microbal cover. Oil and chemical resistance. RATING - General Purpose hose for Water.
• 5/8” I.D. Premium Wrapped Red Hose with FDA approved internal tube. • 5/8” I.D. Premium Wrapped White Hose with FDA internal tube-food grade hose. • 5/8” I.D. Premium Wrapped Black Hose with black internal tube. • 5/8” I.D. - Extruded Yellow, (shown) White or Black Hose with FDA approved internal tube. Also Available: • 3/4” I.D.Extruded Red Hose with black internal tubefor High-Flo unit. • 1/2” I.D.Extruded VALUE LINE Red Hose with black internal tubefor garden hose connection. • 5/8” I.D.Extruded Yellow Microban Hose with black internal tube.
22
NOTE: Strahman hoses come standard in 25, 50, 75, & 100 foot lengths. Standard length 50 foot hose supplied for use on Mixing Units / Hose Stations. Check with factory if longer length is required.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Hoses
For Mixing Unit/Hose Station Connection...Extruded Hose options Extruded Hose Assembly – A Lower Cost Hose for a Variety of Applications Strahman’s Extruded “Yellow” Hose costs less than our standard braided hoses, making it an economical solution for applications that don’t require PREMIUM WRAPPED construction. The Extruded Hose is flexible, lightweight, and easy to handle, yet it offers the same heavy-duty quality you expect from Strahman. This versatile, bright “yellow,” 5/8-inch I.D. hose expertly resists oil, abrasives, and fatty and lactic acids, and it’s designed to handle a wide range of temperatures and work pressures.
Extruded Assembly... available yellow, black, white 5/8” I.D. EXTRUDED high pressure hot water hose with 3/4” Male NPT fitting on unit end, swivel adapter and M-70 spray nozzle on nozzle end. Standard lengths: 25ft., 50 ft., 75 ft. & 100 ft.
Ergonomic Extruded Hose Assembly. . . available yellow, black, white This flexible, lightweight 5/8 inch EXTRUDED high pressure hot water hose is made to fit Strahman’s mixing units/hose stations (The M-5000, M-159, M-156N, M-358, M-200TS and M-5000TS). 5/8” I.D. EXTRUDED high pressure hot water hose with 3/4” Male NPT fitting on unit end, Swivel-Pro Adapter and Hydro-Pro 150TM spray nozzle on the other end. Standard lengths: 25ft., 50 ft., 75 ft. & 100 ft.
For Hose Reel Connection...Heavy-Duty Wrapped Water Hose Hose Assembly R and RS – Available Only For Spring Rewind Hose Reels Masterfully crafted with precisely woven super-strength cord, Strahman’s PREMIUM WRAPPED water hose is engineered to provide extreme flexibility and strength, while remaining lightweight. In fact, it’s the easiest handling hose made. The hose is covered with Neoprene, making it resistant to lactic acid and oil. And its unique braided construction resists kinks and contributes to the hose’s agility, making it as flexible as rope and practically indestructible. • Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi • Available EXTRUDED in yellow, black, white • Available in red, black, white
R and RS (All Stainless Steel) Hose Assemblies 5/8” I.D. high-pressure, Neoprene PREMIUM-WRAPPED, Homoflex hot water hose. 5/8” hose adapter on hose reel with ball stop. M-70/S-70 series nozzle on nozzle end. Option: Internal spring assembly nozzle end. Standard lengths: 25ft., 50 ft., 75 ft. & 100 ft.
For Mixing Unit/Hose Station Connection...Standard Hose
Hose Assembly A and S for Mixing Unit/ Hose Station Connection This high-pressure, Homoflex, 5/8-inch I.D. hot water hose is made to fit Strahman’s mixing units. (The M-5000/M-5700 series, as well as the M-159/M-750 mixing unit series, and the M-156N/M-756 hose station series.) All hose is intended for use with hot and cold water only, and should not be used for steam service. • This hose assembly is available in black, white, or red.
A and S (All Stainless Steel) Hose Assemblies 5/8” I.D. high pressure Neoprene PREMIUM-WRAPPED Homoflex Black hot water hose with 3/4” Male NPT fitting on one end, and M-70/S-70 Series Spray Nozzle with Swivel Connector on the other end. Option: The Internal spring assembly (nozzle end), Internal spring assembly (unit end.) Standard lengths: 25ft., 50 ft., 75 ft. & 100 ft. 23
Hoses / Hose Reels
Hoses
Heavy-Duty Water Hose Assemblies for Garden Hose Connection “E” and “ES”(All Stainless Steel) Hose Assemblies
This high-pressure, black, Homoflex, 5/8-inch I.D. hot water hose (with 3/4-inch female garden hose coupling on one end) is appropriate for any general hot- or cold-water wash down operation where a hose and spray nozzle are necessary. It is intended for use with hot and cold water only, and is not appropriate for use in steam service. This hose assembly comes in black, but is also available with a white hose and nozzle, or a red hose and nozzle. Other lengths are available. Assembly “E” & “ES” — For General Washdown with Hot or Cold Water where a hose and Spray Nozzle are required. Standard lengths: 25 ft., 50 ft., 75 ft. & 100 ft.,— for Hot and/or Cold Water use only. 5/8” High pressure Neoprene PREMIUM WRAPPED Homoflex Black Hot Water Hose with 3/4” Female Garden Hose coupling on one end and M-70/S-70 Series Spray Nozzle with Swivel Connector on other end. Option: Internal spring assembly (nozzle end.)
Value Line Economical Hose Assembly General wash down assembly for hot or cold water where a hose and nozzle are required to hook up to a garden hose tap. This flexible, lightweight 1/2” I.D. red EXTRUDED high pressure hot water hose with 3/4 “ female garden hose coupling on one end and P-77 spray nozzle with swivel adapter on the other end. Standard lengths: 25 ft., 50 ft., 75 ft. &100 ft.
The High-Flo 16™ Hose Assembly Packs a 16 gpm punch for even the most stubborn wash downs when packaged with OUR HIGH-FLO UNITS With the High-Flo 16 Hose Assembly, you can handle the toughest cleanup jobs with minimal hand and wrist fatigue. High-Flo is ergonomically designed to work from a fan spray to a solid stream pattern and minimize misdirected spraying. The High-Flo HP-150 nozzle includes a patented trigger that locks in the desired position – so you don’t need to maintain trigger pressure. • Maximum operating temperature 200˚F/ 93° C • Maximum working pressure to 150 psi (10 BAR) • Flow rate is 16 gpm at 80 psi • 3/4” I.D. Red EXTRUDED Hose Note: Intended for water use only . . . Not suitable for steam service.
Accessories and replacement parts NOZZLE - HOSE • Replacement parts available • Complete nozzle repair kit available 24
NOTE: Strahman cannot guarantee the performance of these hoses unless used with a Strahman nozzle and mixing unit.
Hose Reels
Available In Stainless Steel and Carbon Steel Strahman’s spring rewind hose reels, in stainless steel or carbon steel models, make winding and rewinding our heavy-duty water hose quick and efficient, and provide tidy hose storage and protection. Our reels are equipped with a heavy-duty internal spring motor for effortless winding and rewinding. A sturdy ratchet assembly locks the reel when the desired length of hose has been pulled out; a gentle tug on the hose will unlock the reel and trigger the spring motor to retract the hose. Each hose reel includes a hose ball stop to prevent damage to the hose reel rollers and our water saver nozzle. These convenient and sturdy hose reels can be installed on the floor, wall or ceiling, and come equipped either with or without our standard Strahman Hose Assembly R or RS (with stainless steel fittings and nozzles). This hose assembly includes our 5/8-inch I.D. heavy-duty water hose, in either black, red or white, with our water saver spray nozzle. Ceiling mount might require a special heavy-duty spring. • Holds up to 50 ft. and 100 ft. of hose These reels are available for use with the following Strahman units: M-156N, M-159/M-159TM, M-358, M-750/M-750TM, M-756, M-5000, M-5700 Note: The Strahman spring rewind hose reel is now available for use with the M-5000 or M-5700 mixing unit series. Contact factory for details. AVAILABLE Note: Economy stainless steel hose reel holds up to 50 feet of 5/8” I.D. hose
Spring Rewind Hose Reel Dimensions
Hose reel designed to be used with our 5/8" ID hose. “Strahman Valves are the life support system at our company and we barely ever have to order repair kits. The Strahman wash down equipment takes a lot of abuse, but we pick it up and it works every time. We are a 24-hour operation and we use Strahman products, including the Sampling Valves, every season – both inside and outside. We don’t use anyone else. We have grown and they’ve grown with us.” Larry, Maintenance Manager, Edible Oil Plant
25
Hose Reels / Nozzles
Hose Reels
Hi-Sanitary Stainless Steel Hose Reel Our Hi-Sanitary Stainless Steel Spring Rewind Hose Reel is perfect for sanitary or harsh environments. The reel’s polished, bare finish helps reduce the risk of contamination from chipped paint, providing the best surface for even the most stringent sanitary requirements. Offered to you by Strahman, the Hi-Sanitary Stainless Steel Hose Reel delivers the quality and durability you depend on for all your wash down applications. Key benefits: • Open construction allows for easy wash down and hand/brush scrubbing to minimize trapped food material • Mounting plate with opening for easy cleaning and drying • Automatic spring rewind assembly for safe, quick and easy rewind of hose • All 304 stainless steel construction resists rust and corrosion • Easily installed on floor and wall only
Hi-Sanitary Stainless Steel Hose Reel Dimensions
Hose reel designed to be used with our 5/8" ID hose.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
26
www.strahmanvalves.com
Nozzles
Strahman M-70 (Bronze) / S-70 (Stainless Steel) Series Spray Nozzles— Many of our customers have said Strahman spray nozzles are the best on the market. That’s because at Strahman, we combine modern and innovative engineering with premium quality parts to build hose nozzles strong enough to withstand even the most rugged applications. All of Strahman’s spray nozzles are available in black, white or red, and are available made entirely of stainless steel. Special assembly for food grade is also available. Strahman nozzles work best under these standards:
M-70/S-70
• Maximum recommended operating temperature: 200˚F/93˚C • Maximum working pressure: 150 psi • Flowrates: 5-7 gpm under normal conditions (50-80 psi)/10 gpm max at 150 psi M-75/S-75
This rubber-coated, precision-made nozzle enables the operator to achieve any type of stream of water – from a soft spray to a strong, straight stream – simply by pressing the lever. This convenient control of the wash water assures better cleaning with a lot less effort. The Automatic Water Saver Spray Nozzle automatically shuts off the moment the lever is released, thereby eliminating all waste of water. • Available in black (M-70, S-70), white (M-75, S-75) or red (M-77, S-77) with rubber covers in the same colors for easy replacement.
Strahman Mini M-70 Strahman– The Industry Leader adds the Mini M-70 to its family of Nozzles. The Mini M-70 weighs only 1.8 lbs. and provides the same high quality as Strahman’s premium heavy-duty M-70. • Long Handle Design Grip for whole hand placement • Rev-o-cap Renewable Cartridge Unit design for greater longevity • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200°F/93°C • Replaceable (heavy-duty) Renewable Rubber Cover now available in black • Stainless Steel Seat design prevents nozzle seat leakage • Bronze and Stainless Steel construction • Instant water shut-off when trigger is released • Includes 1/2”, 5/8”, 3/4”, or 3/4” GHT swivel adapter with locking ring
M-77/S-77
Mini-M-70
Note: Intended for water use only. . . Not suitable for steam service.
27
Nozzles/Accessories
Nozzles
The Hydro-Pro 150® Spray Nozzle—”All Stainless Steel” Heavyweight performance in a lightweight design! The Strahman Hydro-Pro 150 is constructed with a stainless steel housing for strength and durability, yet this solid, water saver spray nozzle weighs less than two pounds, and is ergonomically designed to reduce user fatigue. In addition to being extremely lightweight, the Hydro-Pro 150 features a patented, locking trigger mechanism that allows users to lock in a desired spray pattern without having to maintain pressure on the trigger. It also reduces misdirected spraying. Equipped with a waterproof nylon cover that resists cracks and abrasions, this rugged nozzle lasts for a long time and stays cool even when using water as hot as 200˚F. It’s the most advanced spray nozzle around – and it’s only from Strahman. • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200˚F/93˚C • Flowrates: 5-7 gpm under normal conditions (50-80 psi) 10 gpm max at 150 psi • Available: black, white or red Cover Note: Intended for water use only. . . Not suitable for steam service.
Quick Connect - The Hydro-Pro 150® QC Spray Nozzle Revolutionary nosepiece designed for easy 1/4 turn to connect and disconnect. Special Quick Connect attachments. Same great performance as original Hydro-Pro 150 Spray Nozzle.
Quick Connect Attachments • 2 gallon soap reservoir bottle • 6” extension wand with a 16 oz. bottle • 6” extension wand with interchangable heads (adjustable and chisel type) • 24” extension wand straight flow only • 36” extension wand with interchangable heads (adjustable and chisel type) • Available: black, white or red cover • Available with or without swivel adapter • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200°F/93°C • Flow rates: 5-7 gpm under normal conditions (50-80 psi) 10 gpm max. at 150 psi Note: Intended for water use only. . . Not suitable for steam service.
“The Hydro-Pro 150 is comfortable to hold, with no discernable heat transfer to workers’ hands. And, the new nozzles have been dropped, scraped and banged during test use, yet continue to work perfectly.” Michael, Production Manager, Soft Drink Bottling Plant
28
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Nozzles
Light Industrial Use Spray Nozzle P-70 Series The P-70 Lightweight Industrial spray nozzle was primarily designed for the restaurant industry, commercial and industrial kitchens, where light industrial service is required. For heavy-duty industrial service, please refer to the original M-70 Spray Nozzle and our Mini M-70 Spray Nozzle. Strahman’s new P-70 Lightweight Industrial spray nozzle weighs just 1.3 lbs. offering Strahman quality at an economical price. • Adjustable spray pattern from a fine spray to a steady stream • Bronze and Stainless Steel internal construction • Nozzle body made of FDA approved space age material • Low co-efficient of heat transfer • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200°F/93°C • Flow rate: 7 GPM • Available: black, white or red cover • Includes 1/2”, 5/8”, 3/4” or 3/4” GHT swivel adapter with locking ring. Note: Intended for water use only. . . Not suitable for steam service.
Extension Nozzle E-76 and S-76 (Stainless Steel) Series For those hard-to-reach places! The Strahman Extension Nozzle was designed specifically for use in the meat-packing industry. It includes a standard, water-saving spray nozzle with a three-foot standard stainless steel extension shaft for washing down meat, and for use in other hard-to-reach applications. (Special length extension shafts are available upon request.) Governmentapproved and industry-tested, the Extension Nozzle includes interchangeable heads – one for adjusting the water stream from a steady stream to a fine spray; the other is a chisel head which gives off a fan spray. The extension’s curved head directs spray water in a downward direction, perfect for washing away grease and grime that might drip onto meat from overhead rafters. (Straight extensions are also available.) • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200˚F/93˚C • Available: black, white or red cover • Also available made entirely of stainless steel (S-76 series) Note: Intended for water use only. . . Not suitable for steam service.
“The Strahman Spray Nozzles simply do not wear out. It’s just an excellent product. They are simply the best on the market. I’m looking forward to trying the new Hydro-Pro® Spray Nozzle.” Ron, Superintendent, Bakery Industry
29
Nozzles and Accessories
Nozzles
Soft Spray Only Nozzle F-90 and S-90 (Stainless Steel) Series Won’t damage breakable products! Strahman’s Soft Spray Only Nozzle releases a soft spray that won’t damage breakable products. And it shuts off automatically when the nozzle’s lever arm is released. • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200˚F/93˚C • Available in black (F-90, S-90), white (F-95, S-95) or red (F-97, S-97) Note: Intended for water use only. . . Not suitable for steam service.
The Thermo-Pro 2000™ Spray Nozzle A temperature indicator and plastic insulated handle with molded guard at no charge! The Thermo-Pro 2000 Spray Nozzle gives you an easy-to-use lever arm and molded rubber hand guard for complete control and flexibility. Providing a versatile spray range from solid stream to soft fan – Thermo-Pro 2000 is the ideal solution for a wide variety of industries and applications. • Maximum working pressure to 150 psi • Indicates water temperatures from 140˚F/60°C to 200˚F/93°C • Replaceable rubber covers available in red, white or black
Solid Stream only Spray Nozzle S-80 Series (Specify Bronze or Stainless Steel) Washes solids away! This heavy-duty, Strahman Solid Stream Nozzle releases a solid stream of water only, and is perfect for applications where fast, efficient cleanup is necessary, but with minimum moisture. The Strahman Solid Stream Nozzle washes away solids while keeping surrounding areas dry. • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 200˚F/93˚C • Available in black (S-80), white (S-85) or red (S-87) Note: Intended for water use only. . . Not suitable for steam service.
“We buy the Strahman Nozzles because in essence there is no competition. There is no product on the market that matches the quality and durability of Strahman.” Glen, General Manager, Sweetener Manufacturer
30
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com
Accessories, Adapters and Fittings
Nozzle Accessories Strahman provides numerous nozzle accessories to meet your cleanup needs.
Mixing Unit Wall Plate with Nozzle Hook MP-88-NC Series This all stainless steel mounting plate conveniently secures both our mixing units and water saver spray nozzles to the wall, keeping hoses secure and out of the way. Available for use with: M-156N/M-756 Hydro-Pro 150® Spray Nozzle M-159/M-750 Series Automatic Water Saver Series M-5000/M-5700
Wall Plate with Nozzle Hook NC-MP Series Made entirely of stainless steel, this mounting plate provides convenient off the floor storage for our water saver spray nozzles. Available for use with: Hydro-Pro 150® Spray Nozzle Automatic Water Saver Series
Nozzle Hook NC-98 Series This all stainless steel mounting hook attaches to the hose rack on our mixing unit-hose stations to provide safe and efficient storage of our water saver spray nozzles. The Nozzle Hook can be field installed on existing unit-mounted hose racks. Available for use with: M-156N/M-756 Hydro-Pro 150® Spray Nozzle M-159/M-750 Series Automatic Water Saver Series M-5000/M-5700
“I think the Strahman Spray Nozzles are really rugged. Our guys can really abuse the product. They are reliable, well built and can withstand the heavy use in our cellars. We’ve had some in our facility for over 11 years. Strahman hoses and nozzles get dragged around our rough floor and they can really take it.” Lorenzo, Maintenance Supervisor, Winery
31
Adapters / Swivels
Adapters and Swivels
Hose Accessories and Adapters Numerous, easy-to-install hose accessories and adapters are available to keep your Strahman hoses and nozzles operating properly. Stainless steel hose accessories and adapters are also available upon request.
Nozzle End Internal stainless steel spring assembly (nozzle end) includes bronze stainless steel Swivel Hose Adapter for use on Hose Assemblies A and E. Also available in all stainless steel for Hose Assembly S.
Unit End Internal stainless steel spring assembly (unit end) includes a bronze 3/4" male NPT adapter for use on Hose Assembly A. Note: Internal spring assemblies for use with 5/8-inch hose only. Also available in all stainless steel for Hose Assembly S.
#21 Regular Adapters (Non-Swivel) and #21S Swivel Adapters (Brass/Stainless Steel)
1/2" I.D. hose barb on one end and 1/2" male NPT on the other end.
3/4" I.D. hose barb on one end and 1/2" male NPT on the other end.
5/8" I.D. hose barb on one end and 1/2" male NPT on the other end.
3/4" female garden hose thread on one end and 1/2" male NPT on the other end.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
32
www.strahmanvalves.com
Adapters and Swivels #S21 (Non Swivel) Regular Adapters and #S21S Swivel Adapters (All Stainless Steel)
1/2" I.D. hose barb on one end and 1/2" male NPT on the other end.
3/4" I.D. hose barb on one end and 1/2" male NPT on the other end.
5/8" I.D. hose barb on one end and 1/2" male NPT on the other end.
3/4" female garden hose thread on one end and 1/2" male NPT on the other end.
The Swivel-Pro (All Stainless Steel) Standard with “Ergonomic Hose Package”! TM
Swivel-Pro, our latest swivel adapter, features an exclusive ergonomic design. The swivel adapter increases nozzle control to allow circular, horizontal and vertical nozzle movements – while maximizing your comfort and safety. When you package our exclusive Swivel-Pro with our sturdy yet lightweight Hydro-Pro 150 Spray Nozzle; Strahman is able to offer it’s “Ergonomic Hose Package” which is perfect for industrial plant applications where egronomic concerns exist. • 1/2”, 5/8” and 3/4” I.D. hose by 1/2” male NPT and Retro Fit • Maximum working pressure to 150 psi • Maximum working temperature 200˚F/93˚C Note: Swivel-Pro retrofit available for all Strahman hose assemblies.
33
Kits and Valves
Kits
Service Kits Strahman’s service kits, in standard and stainless steel models, provide tools for properly maintaining your Strahman nozzles and valves, and avoiding unnecessary downtime. Each kit includes service instructions.
M-70 Series and S-70 (Stainless Steel) Series Nozzle Kits Quantity 1
Part Number Part #20B *Black Renewable Rubber Cover 4 #S Renewable Cartridge Units 2 #6 Lever Arms 2 #18 Cages 4 #24 Lever Arm Screws 6 #22 Lever Arm Bushings 4 #28 Lock Ring Assemblies 6 #32 Body Sealing O Rings *Specify color cover required
3/4-inch Stainless Steel Valve Kit Quantity 1 1 1 5 2 5 3
Part Number #8 #13 #9 #3 #2
Part Ring Puller Ring Seater Lantern Packing Rings Springs Bottom Valve Rings Base Rings
M-5000 Service Kit Quantity 1 1 1 5 2 5 3 1 1 2 4 2
Part Number Part Ring Puller Ring Seater #8 Lantern #13 Packing Rings #9 Springs #3 Bottom Valve Rings #2 Base Rings Poppet Tool Poppet Seat Tool #7 Poppet Seats #5 * Steam Poppets #13 Ball Check Assemblies w/Gaskets Part #36 *Specify L,M or H poppet and valve casting number when ordering
3/4-inch Bronze Valve Kit V-14-S, V-14-U, V-18 Only Quantity Part Number 1 1 1 #8 5 #13 2 #9 5 #3 3 #2 Specify valve casting number
Part Ring Puller Ring Seater Lantern Packing Rings Springs Bottom Valve Rings Base Rings
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
www.strahmanvalves.com 34
Valves
Valves Soft Seal Piston Valve Dimensions Bronze, Bronze Chrome-Plated, Stainless Steel
Model Shown: V-14-U 3/4" Globe Type (Union Connection). Models Available: V-14-S 3/4" Globe Type (Screwed Ends). V-18 3/4" Angle Type (Screwed Ends). SST Models: V-65-SU, V-65-SS and V-18-SS
Soft Seal Piston Valve 3/4-inch Standard and Stainless Steel Models Strahman’s Soft Seal Piston Valve features Teflon® to make turning and tightening practically effortless. A stainless steel piston enters a soft Teflon coated ring to form a super tight seal without the need for laborious turning. This unique closure principle prevents foreign materials from interfering with the seal and positively prevents leaks. Hoses stay cool, last longer and wear out less. • Maximum recommended operating temperature: 370˚F/188˚C • Maximum working pressure: 150 psi • 3/4-inch valve for use with Strahman’s mixing unit-hose stations • Made with bronze body/all stainless steel working parts • Available in chrome plated model • Also available made completely of stainless steel (V-65/V-18 Series) Teflon® is a registered trademark of DuPont.
35
kits and Accessories
Kits
Conversion Kit 3/4-inch Soft Seal Conversion Kit Converting your existing Strahman 3/4-inch valves is a snap with our 3/4-inch Soft Seal Conversion Kit. This easy-to-use kit allows you to quickly replace your Strahman 3/4-inch valves, and keep your Strahman hose equipment running smoothly. • Maximum working pressure: 150 psi • Maximum recommended operating temperature: 370˚F/188˚C
To install conversion kit: 1. Loosen bonnet nut #11 and remove entire bonnet assembly from body #1. 2. Using puller, remove old valve ring #3 and base ring #2 from valve body #1. Blow out all foreign matter inside valve body. 3. Remove handwheel #16, nut #17, lock washer #18, identification tag #19, packing gland #14, packing nut #15 and bonnet nut #11 from old valve body. Set these parts aside for re-use upon conversion. 4. Drop new base ring #2 into ring pocket in valve body #1. 5. Place valve ring #3 on seating tool and drive into valve body as far as it will go. Keep seater tool straight as possible when inserting ring. 6. Install lantern #8 with larger diameter and wider section of band facing up. Make sure lantern #8 sits evenly on ring. 7. Reassemble bonnet nut #11, packing gland #14, packing nut #15, handwheel #16 and parts #17, #18, and #19 to conversion kit assembly. Tighten packing unit #15 lightly. 8. Before installing the soft seal conversion kit into valve body, fully retract stem #6. Install into body. Tighten down bonnet nut #11 to refusal point.
STRAHMAN VALVES, INC. Toll Free 877-STRAHMAN
36
www.strahmanvalves.com
Accessories
Automatic and Manual Steam Traps for M-5000/M-5700 Units Strahman’s steam traps remove condensate from pipe lines, which eliminates the problem of “water hammer” when the M-5000/M-5700 units are first used. Operation The automatic steam trap will shut off automatically when steam pressure accumulates in the line. Condensate is carried off by copper tubing. The manual steam trap will eliminate condensate from the steam line manually; a valve is provided to manually remove the condensate from the line which is carried off by a copper tube.
Stainless Steel Mounting Plate MP-88 Series Stainless steel unit mounting plates are standard equipment with all stainless steel Strahman wall-mounted mixing units. However, these sturdy units can also be purchased separately for use with these Strahman wall-mounted units: M-159/M-159TM M-5000/M-5000TS M-156N
HR-100 and HR-100L Series Strahman’s stainless steel, wall-mounted hose racks help keep hoses neatly coiled and in place. The HR-100 model is holds up to 50 feet of Strahman hose and can be easily mounted on any conventional masonry wall. Perfect for places where hose service is needed but a mixing unit is not. Our HR-100L model will hold up to 100 feet of Strahman hose.
37
The Strahman family of products also includes: WASHDOWN EQUIPMENT
THE STRAHMAN FAMILY OF PRODUCTS ALSO INCLUDES:
Strahman has a full line of mixing unit-hose stations, transfer hoses, nozzles and accessories. Request our Washdown Equipment catalog.
PROCESS VALVES Strahman has the capability of manufacturing DRAIN VALVES custom process valves for all industries, particularly the
polymer industry, including diverter valves, in-line valves, drain valves and stop valves, all designed to meet Also known as tank bottom valves, RAM valves or piston valves, our the particular (or customer) requirements for high pressure and temperature systems.
drain valves are used to empty vessels or to take process samples. There’sSnoAclogging, leaking M P LnoI N G and V AnoLmisalignment. VES
Strahman has a full line of sampling valves that produce live samples without exception. SAMPLING VALVES Our sampling valves are designed to prevent failure caused by sediment or clogging.
We have a full line of sampling valves that produce live samples D R AOur I Nvalves V are A Ldesigned V E Sto prevent failure caused without exception. Strahman Drain Valves areor designed so that they cannot clog. They are ideal for use in by sediment clogging. liquid and gas service or with slurries and high viscosity fluids which may solidify at Contact your Strahman room representative temperature. for complete details.
L IonNtheEWebBat:L I N D V A L V E S Visit us Strahman Line Blindwww.strahmanvalves.com Valves provide zero leakage and total isolation on process pipelines, vessels and maritime applications. No pipeline movement is required when blind position is changed.
Contact your Strahman representative for complete details.
CORPORATE HEADQUARTERS - USA
France Savoie Hexapole, F- 73420 Mery, France
Strahman Valves, Inc. 2801 Baglyos Circle, Tel: 33 4 76 35 78 00 Fax: 33 4 79 35 78 20 Bethlehem, PA 18020 USA United Kingdom Tel 484-893-5080 Fax 484-893-5099 PO Box 75 - Sutton GmbH - Germany Strahman Valves Strahman Valves - France - UK Strahman Valves Surry SM3 9WA, England Toll Free 1-877-STRAHMAN Tel: 44 (0) 20 8641 5985 Fax: 44 (0) 22 8288 1500 www.strahmanvalves.com Eisenbahnstr. 104a D-77833 Ottersweier Germany Savoie Hexapole BP 71 – 73 420 Mery, France PO Box 75 – Sutton Surrey SM3 9WA - England Tel: 44 (0) 20 8641 5985 Fax: 44 (0) 20 8288 1500 047.5MCPL
Tel: 33 (0) 4 79 35 78 00 Fax: 33 (0) 4 79 35 78 20 www.mg-valves.com
Tel: 49 (0)Germany 7223-22057/58 Fax: 49 (0) 7223-20165 Eisenbahnstrasse 104a www.strahman-mg.de
D-77833 Ottersweier, Germany Tel: 49 7223 22057 Fax: 49 7223 20165