3d temp manual:Layout 1 21/10/2008 16:23 Page 1
In order to protect your purchase and aid your warranty please fill in the following form and keep it safe for your future reference:
Model Number: Serial Number: Purchased From:
KEEP IT SAFE Staple your receipt here:
Date of Purchase:
Limited Warranty All VIBE products carry a full twelve months warranty, valid fromthe date of the original receipt / proof of purchase. In order tovalidate this warranty, the warranty card should be returned to VIBEwithin seven days of the original purchase date. The original receipt and packaging should also be retained for this twelve month period. If at any stage during the warranty period you have a problem with the product then it should be returned to the point of purchase, with proof of purchase in its original packaging, complete with no items missing. If the store is unable to fix the product it may have to be returned to VIBE this process takes around 7 working days. A full description of VIBE's warranty information can be found on our website:
www.vibeaudio.co.uk/warranty A written version can also be obtained from VIBE warranty Dept, PO BOX 11000, B75 7WG
Technical enquires call 09067031420 call cost 50p per minute call costs correct at date of publication (01/01/07) Hours of business 9.00am - 5.30pm all calls are recorded for training purposes MIDbASS Distribution PO Box 11000 B75 7WG
Instruction Manual To ensure maximum performance and safety, please follow this manual. Please retain the manual for future reference after installation. Model: SPACE 3D
3d temp manual:Layout 1 21/10/2008 16:23 Page 2
Component midrange and tweeter installation. Locate a suitable position for the midrange and tweeter. Many positions will provide good sound quality. For optimum staging position the midrange and tweeter higher than the woofer but within 5 to 10" of the woofer. The midrange and tweeter should be mounted as close together as possible. Use the cut out template and mark and cut out the hole for the driver to mount into.
Crossover installation SPACE 5, 6 & 3D The crossover units are designed to be mounted as close to the woofers as possible. 1. 2. 3. 4. 5. 6. 7.
Locate a suitable mounting place for them. Remove the lid by removing the 5 retaining screws. Mark the two mounting holes inside the crossover unit. Pre drill these holes. Secure the crossovers with the screw provided. Make all the wiring connections. Refit the lid.
Place the driver into the hole. Secure the drivers with the screws supplied \
Component wiring for SPACE 5 & 6
3D midrange and tweeter installation The Space midrange and tweeter can be mounted in a coaxial configuration. This will provide the listener with a diffused, less directional sound and add a spatial 3 dimensional sound to the speaker system Locate a suitable position for the midrange and tweeter. Many positions will provide good sound quality. For optimum staging, position the midrange and tweeter higher than the woofer but within 5 to 10" of the woofer. Use the cut out template and mark and cut out the hole for the midrange and tweeter to sit into.
Mounting depth:
SPACE5: SPACE6:
55MM+0.5MM 62MM+0.5MM
Mounting diameter:
SPACE5: SPACE6:
120MM+0.5MM 143MM+0.5MM
Place the midrange and tweeter into the hole using the supplied chrome spacers, it will be necessary to root the tweeter cable through one of the spacers which has a notch. Secure with the long screws provided.
0dB
-3dB
Tweeter attenuator switch 0dB or -3dB ATTENUATION FOR THE TWEETER