Edge Subwoofer Overview 2018

Subwoofer

Collection

2018

Db

SERIES

The EDGE DB series subwoofers offer incredible performance at an incredible price.

With a combination of British and European engineering we could pull every last bit of performance from this woofer using clever and tactical engineering when working with the motor and soft parts of the woofer. Using such clever techniques like reducing magnet inner dimensions to increase magnetic force rather than increasing outer dimensions optimises space and size.

The EDGE DB series woofers use all the below technology and more!

High Roll Foam Surrounds The high roll foam surround allows the EDGE range of subwoofers to produce market leading excursion, The composition of the foam allows for the surround to remain still which in turn gives added control to the excursion not to mention looking Incredibly aggressive High press foam surround gives “extreme density�and perfect lateral oscilaltion control Stitched surround for added strength

Tinsel Leads

Y35 Ferrite magnets EDGE subwoofers use an ultra-high grade ferrite magnet known as Y35, this grade of magnet is not often used in subwoofer Manufacture, its more common to see Y20 or Y25 magnet grades. This high-grade ferrite magnet means that we can generate more motor force but more importantly generate a much better sensitivity.

With a greater density,weight and quality over our competition, the EDGE subwoofers use the best magnets on the market.

Non Pressed Paper Cones

Non pressed paper was the choice of material for our cones The tinsel leads within the edge range of subwoofers on the EDGE range of subwoofers, have been Developed to have optimum heat dispersion the non pressed has significant benefits over pressed and superior Conductivity. paper cones. The non pressed paper is a much better To do this the tinsel leads have an extra wide match to the high roll foam surround, Outstretched design that is woven into the nomex spider. and offers much better damping factors This design lends itself perfectly to at low frequencies which is perfect for subwoofer applications. working well with the high excursion The cone also is much better at stress transfer so will pass the linear motion of the extreme and ultimate subwoofers stress to the surround as opposed to dealing with the stress on the cone which could be very detrimental to the performance,

Db

SERIES Model EDB12D2-E7 Cone Non-pressed paper cone Surround Big roll foam - stitched Dusrcap Black PP

Non Pressed Paper Cone Wide Roll Stitched Dual Foam Surround Dual Spiders Spring Loaded Connectors High Quality Y35 Ferrite Magnets 64mm 4 Layer Black Aluminium Voice Coil Dual 2 Ohm Impedance

Voice Coil 36mm Copper winding Spider Dual Layer Gasket Rubber Top Plate 10mm Black anodized T-Yoke 10mm Flat Terminal / Wire Terminal Impedance Dual 2 Ohms RMS Power 700 watts Magnet 156mm x 80mm x 25mm 2pcs

Dbx

SERIES

The brand-new EDGE DBX series subwoofers come in 12 and 15 inch varieties and offer a upscale in performance from its smaller brother the DB series subwoofer. The aim of this woofer was to offer ground pounding, trunk rattling performance at a very keen price point.

To achieve this our engineers worked on finding the perfect alloy style basket to optimise the critical soft part dimensions of the subwoofer. By doing this we could use multiple very wide spiders with spaced support to guarentee 2 connection points. this will control lateral movements along its xmech. Paired with a tall basket with extended back plate to accommodate our larger 45mm VC winding height. This extended winding height allows the woofer to be pushed without passing its mechanical limits thus making a tough robust subwoofer!

Subwoofer pole venting Extended pole piece on the DBX series woofers, this will maximize Xmech, so the Voice Coil will be always be under total control!

FEMM motor design for maximum pole gap magnetic flux bumped t-yolk for extension of the bottom plate and pole venting

Spider Assembly wide spider landing, not common for subs in this price category multiple spider with spaced support to guarantee 2 connection points. this will control! lateral movements along its xmech c

Alloy torsion baskets Alloy basket for better torsion control, and minimize magnetic losses thrugh the basket The alloy basket allows us to get the best spider platform and allow the length of VC we require for our high excursion

Voice Coils Home engineered Voice Coils High extended VC length which is very uncommon at this level of product. increased level of VC thickness and winding This increase in VC quality leads to higher power handling

Dbx

SERIES

Model EDB12D2X-E7 Cone Non-pressed paper cone Surround Big roll foam - stitched Dustcap Black PP Voice Coil 45mm Copper winding

EDB15D2X-E7 Non-pressed paper cone Big roll foam - stitched Black PP 45mm Copper winding

Spider Dual Spider

2pcs black PC

Gasket Rubber

Rubber

Top Plate 10mm Black anodized T-Yoke 8mm Bumped Terminal / Wire Terminal

10mm Black anodized 12mm Bumped Terminal

Impedance Dual 2 Ohms

Dual 2 Ohms

RMS Power 900 watts

1100 watts

Magnet 170mm x 90mm x 20mm 2pcs

190mm x 90mm x 20mm 2pcs

Non Pressed Paper Cone Wide Roll Stitched Dual Foam Surround Dual Spiders Spring Loaded Conectors Dual Stacked High Quality Y35 Ferrite Magnets 64mm 4 Layer Black Aluminium Voice Coil Dual 2 Ohm Impedance

Street SERIES

The aim with the EDGE street series subwoofers was to produce a range of subwoofers which outperform all its competition when it comes to entry level competition and street bass, with 10,12,15 and 18 inch models available we have covered all bases! with dual, triple and quad spider packs across the range the street series subwoofers offer a high level of motor force not seen by its nearest competitor and the spider packs allow for extreme level of excursion under ultimate control.

With up to 65mm winding height the street series woofers offer the tallest VC configurations we could engineer allowing for total, electronic and mechanical control of the 4 layer Black alu voice coils.

With triple stacked Y35 magnets across the range these woofers are heavy duty and create a massive amount of motor force due to the well-engineered VC and pole gap paired with the magnet assembly!

High roll surround

subwoofer pole venting

alloy torsion basket

y35 ferrite magnets

voice coils

non pressed paper cones

The EDGE street range adopts all the features of the DB and DBX range plus more! wider VC for better power handling and better BL (motoforce) longer VC winding for better xmech and maximize power handling tinsel leads

spider assembley

wider motor structure for ... better BL, SPL, power handling more spiders for better control reliability, Xmech and more

Street SERIES

Model EDS10D2-E7 Cone Non-pressed paper cone

Non Pressed Paper Cone Wide Roll Stitched Dual Foam Surround Dual, Triple And Quad Black PC Spiders Spring Loaded Conectors High Quality Y35 Triple stacked Ferrite Magnets 76mm 4 Layer Black Aluminium Voice Coil (64mm EDS10D2-E7) Dual 2 Ohm Impedance

Surround Big roll foam - stitched Dustcap Black PP Voice Coil 40mm Copper winding

EDS12D1-E7 / EDS12D2-E7

EDS15D1-E7 / EDS15D2-E7

EDS18D1-E7 / EDS18D2-E7

Non-pressed paper cone

Non-pressed paper cone

Non-pressed paper cone

Big roll foam - stitched

Big roll foam - stitched

Big roll foam - stitched

Black PP

Black PP

Black PP

50mm Copper winding

55mm Copper winding

65mm Copper winding

Spider Dual Spiders

Triple Spiders

Quad Spiders

Quad Spiders

Gasket Rubber

Rubber

Rubber

Rubber

15mm Black anodized

15mm Black anodized

15mm Black anodized

15mm Flat

25mm Flat

25mm Flat

Terminal

Terminal

Terminal

Dual 1 Ohms / Dual 2 Ohms

Dual 1 Ohms / Dual 2 Ohms

Dual 1 Ohms / Dual 2 Ohms

Top Plate 8mm Black anodized T-Yoke 10mm Flat Terminal / Wire Terminal Impedance Dual 2 Ohms RMS Power 1300 watts Magnet 190mm x 95mmx 20mm 3pcs

1500 watts

1800 watts

2000 watts

190mm x 95mmx 20mm 3pcs

190mm x 95mmx 20mm 3pcs

200mm x 110mm x 20mm 3pcs

Xtreme SERIES

EDGE xtreme subwoofers were designed with deep low bass and high excursion at the forefront of the priority!

Using a light weight 3 inch VC with a massive 70mm winding height the xtreme woofers deliver massive excursion with high level of precision.

Triple stacked 250mm x 25mm motors and 30mm back plate allow this extreme excursion to occur when paired with 4 layer NOMEX spiders!

The idea was to ensure the woofers could deal with 3000 watts RMS and deliver the excursion required to displace masses of air in show and competition installs!

A well-known industry basket is used to allow us to engineer the soft parts to optimise performance and beautifully crafted basket additions were created to the give the EDGE xtreme series a unique and desirable look

Y35 Ferrite magnets EDGE subwoofers use an ultra-high grade ferrite magnet known as Y35, this grade of magnet is not often used in subwoofer Manufacture, its more common to see Y20 or Y25 magnet grades. This high-grade ferrite magnet means that we can generate more motor force but more importantly generate a much better sensitivity.

With a greater density,weight and quality over our competition,

Direct Connection Leads Using 8awg OFC copper leads the extreme and unlimited subwoofers from EDGE use a direct connection from the tinsel leads to the amplifier, this means no additional connectivity required from subwoofer to amplifier thus reducing the resistance inline from the amplifier to the subwoofer.

the EDGE subwoofers use the best magnets on the market.

NOMEX spiders

USA Made Voice coils

EDGE use USA built 3 inch and 4inch 4 and 8 EDGE utilise NOMEX spiders across a range of subwoofers, layer flat wound copper voice coils on our Extreme and the properties of NOMEX as a material are perfect for Unlimited subwoofer range. application in subwoofer construction. Its heat resistant, The US built coils use very high quality components ultra strong and ultra light properties see it used in many military including flat wound ofc copper, high temperature resistant applications including flight suits and even to give strength and glue, strong but light aluminum former rigidity to helicopter blades! Its low stress and ultra strength means that and black heat resistant resin. the spider will not stretch and sagover time so the performance will These all amount to very high performing and not be degraded and will continue to be an high power handling voice coils, 3000 watts RMS and 5000 watts RMS in our range! incredible subwoofer!

Xtreme SERIES

Model EDX12D1-E7 / EDX12D2-E7 Cone Non-pressed paper cone Surround Big roll foam - stitched Dustcap Black PP Voice Coil 70mm Copper winding

EDX15D1-E7

EDX18D1-E7

Non-pressed paper cone

Non-pressed paper cone

Big roll foam - stitched

Big roll foam - stitched

Black PP

Black PP

70mm Copper winding

70mm Copper winding

Spider 6 pcs spider pack

6 pcs spider pack

6 pcs spider pack

Gasket Rubber

Rubber

Rubber

Top Plate 25mm Black anodized T-Yoke 30mm Flat Terminal / Wire 8 awg Cable Impedance Dual 1 Ohms / Dual 2Ohms RMS Power 3000 watts Magnet 220mm x 110mm x 25mm 3pcs

25mm Black anodized

25mm Black anodized

30mm Flat

30mm Flat

8 awg Cable

8 awg Cable

Dual 1 Ohms

Dual 1 Ohms

3000 watts

3000 watts

220mm x 110mm x 25mm 3pcs

250mm x 110mm x 25mm 3pcs

Non Pressed Paper Cone Wide Roll Dual Foam Surround 10" Quad Black NOMEX Spiders 8 awg direct cable connection High Quality Y35 Triple stacked Ferrite Magnets 76mm USA Built 4 Layer Flat Wound Voice Coil Dual 1 Ohm Impedance

Unlimited SERIES

The EDGE Unlimited series subwoofers are the biggest and baddest subwoofers we have every created!

With a monstrous 280mm x 25mm triple stacked magnet assembly on the 15 and 18 inch drivers this is one of the biggest subwoofers in the car audio world.

The aim with this woofer was to design a low FS competition woofer and boy does this deliver! with an FS of 28hz and 75mm x 100mm USA made voice coil this subwoofer will eat up 5000 watts RMS and deliver over 65mm of excursion!

Our engineers used the biggest possible spider at 10 inches and combined NOMEX with PC spiders to deliver a 5pc spider back for ultimate control.

The 75mm winding height still allows us all that excursion while keeping the woofer under complete electrical and mechanical control.

High roll foam surrounds and direct leads just add to the function of the woofer!

This woofer brings the lowest deepest bass out of any competition or show install delivering building shaking ground pounding bass!

y35 ferrite magnets

DIRECT LEADS

the Unlimited series subwoofers take everything from the xtreme series subwoofers and take it to an even crazier level largest motor structure in the industry longest vc winding height possible NOMEX SPIDERS

massive xmech capacity huge power handling! unique motor structure design

USA BUILT VOICE COILS

Unlimited SERIES

Model EDX12D1SPL-E7 / EDX12D2SPL-E7 Cone Non-pressed paper cone Surround Big roll foam - stitched Dustcap Black PP Voice Coil 75mm Copper winding

EDX15D1SPL-E7

EDX18D1SPL-E7

Non-pressed paper cone

Non-pressed paper cone

Big roll foam - stitched

Big roll foam - stitched

Black PP

Black PP

75mm Copper winding

75mm Copper winding

Spider 1pcs black NOMEX + 5pcs PC

1pcs black NOMEX + 5pcs PC

1pcs black NOMEX + 5pcs PC

Gasket Rubber

Rubber

Rubber

Top Plate 30mm Black anodized T-Yoke 50mm Flat Terminal / Wire 8 awg Cable

30mm Black anodized

30mm Black anodized

50mm Flat

50mm Flat

8 awg Cable

8 awg Cable

Impedance Dual 1 Ohms / Dual 2Ohms

Dual 1 Ohms

Dual 1 Ohms

RMS Power 5000 watts

5000 watts

5000 watts

280mm x 120mm x 25mm 3pcs

280mm x 120mm x 25mm 3pcs

Magnet 250mm x 120mm x 25mm 3pcs

Non Pressed Paper Cone Wide Roll Dual Foam Surround 10" 6pcs Black NOMEX / PC Spiders 8 awg direct cable connection High Quality Y35 Triple stacked Ferrite Magnets 102mm USA Built 8 Layer Flat Wound Voice Coil Dual 1 Ohm Impedance