Vibe 2016 cat web

CATALOGUE 2016

3 Way Component Speaker

FEATURES 3 WAY PASSIVE CROSSOVER

3 way passive crossover with selectable 90Hz high pass filter for the woofer and Mundorf reference capacitor for the tweeter

COMPONENT MIDRANGE

Designed specifically for high quality musical reproduction, with particular attention to the all important vocal region

REMOVABLE GRILLE

Tweeter features a removable, large hexagon mesh grille secured by the magnetic force of the motor

FEA Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

RUBBER Rubber surround provides superior linearity throughout the woofers excursion

3-way Component Seperate woofer, mid-range and tweeter provide better clarity

WIDEBAND

Wide bandwidth tweeter capable of extended frequency response

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

CVEN63C-V4 Component 3-way 6.5” (165mm) 130 watts 290 watts 65 watts 91dB 45Hz - 20kHz 4Ω 2.9” (73mm) 5.6 ” (143mm) CVENS4, C6

2 Way Component Speaker

FEATURES

WIDE BANDWIDTH TWEETER

22mm voice coil and wide surround deliver an extended bandwidth that would usually require multiple drivers

PAPER COMPOSITE CONE

Composite paper woofer cone delivers fast, accurate bass and vocal clarity and perfectly matched to the wide bandwidth tweeter with no filtering required

LINEAR SUSPENSION

Linear suspension with specially designed Butyl rubber surround and Conex damper (spider) for long durability under extreme operating conditions

FEA Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

RUBBER Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

WIDEBAND

Wide bandwidth tweeter capable of extended frequency response

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

CVEN62C-V4 Component 2-way 6.5” (165mm) 120 watts 240 watts 60 watts 91dB 45Hz -20Hz 4Ω 2.9” (73mm) 5.6” (143mm) CVENS4, C6

Component / Coaxial / Speaker

FEATURES

RECTANGULAR CONE

The strong, deeply sculpted rectangular IMPP woofer cone gives 20% more surface area that a conventional 6×9

COMPONENT / COAXIAL

The removable 2” Midrange and 1” Titanium Tweeter can be mounted on the woofer in a tri-axial configuration or separately as a component speaker

MAGNET BOOT

The removable rubber boot provides protection for the subwoofer’s motor

RUBBER IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Rubber surround provides superior linearity throughout the woofers excursion

Tri-axial Speaker 3-way speaker contains a woofer, mid-range and tweeter for better clarity

Titanium Tweeter Titanium tweeter for extreme high frequency

ABS Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BDQB69-V2 Coaxial / Component 3-way 7.4” x 10.1” (188 x 257mm) 200 watts 600 watts 100 watts 93dB 30Hz - 25kHz 4Ω 3.9” (100mm) 6.75” x 8.8” (162 x 224mm) Blackdeath S2

2 Way Component Speaker

FEATURES

TWEETER

28mm silk dome tweeter delivers crystal clear high frequecy response

CARBON CONE

Hand layered carbon cone provides boosted bass response

2 WAY PASSIVE CROSSOVER

Passive crossover featuring high quality MKT capacitors and tweeter attenuation

RUBBER Carbon Fibre Cone High sensitivity and low moving mass

Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKDEATH6C-V6 Component 2-way 6.5” (165mm) 140 watts 420 watts 70 watts 93dB 45Hz - 25kHz 4Ω 2.6” (65mm) 5.6” (143mm) Blackdeath S2

Pro Audio Speakers

FEATURES

COMPOSITE PAPER CONE

Composite paper cone delivers fast accurate bass coupled with high efficiency

BLACK HOLE DUSTCAP

Specifically designed dustcap increases effective surface area for increased SPL

ALLOY GASKET

Cast aluminium gasket with signature CNC detailing with a high-end aesthetic to complement the best competition level installs

Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

D R I V E R Speed Bass Extended low frequency response with high accuracy

Pro Audio Driver Driver based on high end Pro Audio (PA) designs

Black Hole Black Hole dustcap increases cone size for higher SPL (sound pressure level)

Alloy Gasket Made from high quality machined aluminium

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BDPRO6M-V4 Midrange 1-way 6.5” (170mm) 150 watts 450 watts 75 watts 92dB 140Hz - 9kHz 3.2Ω 68mm (2.7”) 146mm (5.7”) Blackdeath S2

BDPRO8M-V1 Midrange 1-way 8” (203mm) 200 watts 600 watts 100 watts 93dB 65Hz - 7.5kHz 4Ω 3.4” (85mm) 7.3” (185mm) Blackdeath S2

BDPRO10W-V1 Woofer 1-way 10” (254mm) 250 watts 750 watts 125 watts 94dB 55Hz - 3.5kHz 4Ω 4.2” (106mm) 9.25” (235mm) Blackdeath S2

BDPRO12-V1 Coaxial 2-way 12” (304mm) 300 watts 900 watts 150 watts 93dB 45Hz - 20kHz 4Ω 6.8” (173mm) 11.2” (285mm) Blackdeath S2

Pro Audio Tweeter

FEATURES

ALLOY FLANGE

Cast aluminium flange with signature CNC detailing

BULLET TWEETER

High efficiency bullet tweeter design

OVERSIZED MOTOR

Huge motor delivers extreme power and high SPL

D R I V E R TI Tweeter Titanium tweeter for extreme high frequency performance

Spade Terminals Allows ease of installation

Pro Audio Driver Driver based on high end Pro Audio (PA) designs

Single Magnet Single ferrite magnet for high power handling

Alloy Gasket Made from high quality machined aluminium

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BDPRO4T-V1 Compression Driver 1-way 4” (100mm) 100 watts 300 watts 50 watts 107dB 1.5kHz - 20kHz 4Ω 1.7” (65mm) 3.4” (93mm) Blackdeath S2

Black Edition 3 Way Component Speaker

FEATURES CONCENTRIC DRIVER

A market first for the automotive sector, the Blackair 63C features a 3.5” midrange with a concentrically mounted tweeter for a true point source and superior staging

DEDICATED PASSIVE CROSSOVERS

Separate passive crossovers for the woofer and concentric driver allow the use of higher quality components and maximise installation flexibility

FIBREGLASS CONE

High grade fibreglass cone delivers fast accurate bass and clear vocal reproduction

RUBBER Fibreglass Cone Fibreglass woofer cone for clarity of bass

Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR63C-V6B Concentric component 3-way 6.5” (165mm) 130 watts 390 watts 65 watts 88dB 45Hz - 25kHz 4Ω 2.6” (65mm) 5.2” (143mm) Backair S4

Black Edition 2 Way Component Speaker

FEATURES

FIBREGLASS CONE

High grade fibreglass cone delivers fast accurate bass and clear vocal reproduction

SILK DOME TWEETER

28mm silk dome tweeter provides extended high frequency response and high power handling

2 WAY PASSIVE CROSSOVER

Passive crossover featuring high quality MKT capacitors and tweeter attenuation

RUBBER Fibreglass Cone Fibreglass woofer cone for clarity of bass

Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR6C-V6B Component 2-way 6.5” (165mm) 120 watts 360 watts 60 watts 88dB 45Hz - 25kHz 4Ω 2.6” (65mm) 5.2” (143mm) Blackair S4

Component Speakers

FEATURES FIBREGLASS CONE

Fibreglass cone delivers tight, accurate bass with excellent transient response

EURO FIT BASKET

Multifit basket with shallow mounting depth provides maximum installation compatibility

TWEETER

Silk dome tweeter delivers smooth high frequency response

Fibreglass Cone Fibreglass woofer cone for clarity of bass

PU Surround Polyurethane offers fast, precise damping of the cone

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR5C-V1 Component 2-way 5.25” (133mm) 90 watts 270 watts 45 watts 88dB 60Hz - 25kHz 4Ω 2.2” (55mm) 4.6” (116mm) Blackair S4, CH5

BLACKAIR6C-V1 Component 2-way 6.5” (165mm) 115 watts 345 watts 55 watts 90dB 55Hz - 25kHz 4Ω 2.3” (58mm) 5.5” (139mm) Blackair S4, CH5

BA1-V1 Tweeter 1-way 1.5” (38mm) 60 watts 180 watts 30 watts 90dB 2.5kHz - 25kHz 4Ω 1” (24mm) 2” (50mm) Blackair S4, CH5

Coaxial Speakers

FEATURES

SILK DOME TWEETER

Silk dome tweeter diaphragm with extreme high frequency performance

EXTERNAL CAPACITOR

High quality capacitor delivers improved high frequency response

CUSTOM GRILL

Removable steel mesh grill provides protection for the woofer without sacrificing high frequency response

Fibreglass Cone Fibreglass woofer cone for clarity of bass

PU Surround Polyurethane offers fast, precise damping of the cone

Co-axial Speaker 2-way speaker contains a woofer and built-in tweeter

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR5-V1 coaxial 2-way 5.25” (133mm) 80 watts 240 watts 40 watts 88dB 60Hz - 25kHz 4Ω 2.1” (53mm) 4.5” (116mm) Blackair S4, CH5

BLACKAIR6-V1 coaxial 2-way 6.5” (165mm) 90 watts 270 watts 45 watts 90dB 55Hz - 25kHz 4Ω 2.2” (57mm) 5.5” (139mm) Blackair S4, CH5

BLACKAIR69-V1 coaxial 3-way 6” x 9” (150 x 222mm) 175 watts 525 watts 85 watts 90dB 50Hz - 25kHz 4Ω 3.1” (78mm) 5.9” x 8.7” (150 x 220mm) Blackair S4, CH5

BMW Front Speaker Kit

FEATURES

ESOTERIC CONE

Composite cone using paper, and wood fibres for a lightweight and rigid cone producing a natural vocal reproduction

NEODYMIUM MOTOR

All drivers feature powerful neodymium motors which deliver maximum magnetic force with shallow installation depth

SHALLOW SUBWOOFER

Custom tooled 8 inch subwoofer directly replaces the under seat installed factory speakers delivering improved bass performance

FEA Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

RUBBER Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Vehicle Manufacturer Fitment Recommended Amp

OPTISOUNDBMWF4-V4 Car Specific Component 3-way 8� (200mm) 115 watts 345 watts 55 watts 90dB 55Hz - 25kHz 4ℌ BMW E 82/87/88/90/91/92/93 Slick S4

Golf 6 Front Speaker Kit

FEATURES

ESOTERIC CONE

Composite cone using paper, and wood fibres for a lightweight and rigid cone producing a natural vocal reproduction

SPEAKER ADAPTOR

Allows easy fitment of the woofer into the existing location with no modifications required

SILK DOME TWEETER

25mm silk dome tweeter delivers natural high frequency response

FEA Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

RUBBER Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration

OPTISOUNDGOLF6F-V4 Car Specific Component 2-way

Speaker Size

6.5� (165mm)

RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Vehicle Manufacturer Fitment Recommended Amp

120 watts 360 watts 60 watts 90dB 55Hz - 25kHz 4â„Ś VW Golf 6 Slick S4

Component Speakers

FEATURES

PP CONE

Absorbing PP cone delivers deep, accurate bass

SILK DOME TWEETER

Silk dome tweeter delivers smooth high frequency response

EURO FIT BASKET

Multifit basket with shallow mounting depth provides maximum installation compatibility

RUBBER PP Cone Rigid polypropelene woofer cone for smooth, low bass

Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

SLICK4C-V3 Component 2-way 4” (100mm) 70 watts 210 watts 35 watts 90dB 80Hz - 25kHz 4Ω 1.4” (44mm) 3.7” (94mm) Slick S4

SLICK5C-V3 Component 2-way 5.25” (130mm) 80 watts 240 watts 40 watts 90dB 60Hz - 25kHz 4Ω 1.9” (48mm) 4.5” (114mm) Slick S4

SLICK6C-V3 Component 2-way 6.5” (165mm) 90 watts 270 watts 45 watts 91dB 54Hz - 25kHz 4Ω 1.8” (46mm) 5.5” (139mm) Slick S4

Coaxial Speakers

FEATURES

PEI TWEETER

PEI tweeter delivers powerful high frequency response

RUBBER SURROUND

Rubber surround provides enhanced bass response

SHALLOW MOUNTING DEPTH

Shallow mounting depth maximises ease of installation allowing fitment where traditional speaker designs cannot be fitted

RUBBER PP Cone Rigid polypropelene woofer cone for smooth, low bass

Rubber surround provides superior linearity throughout the woofers excursion

Co-axial Speaker 2-way speaker contains a woofer and built-in tweeter

PEI Tweeter Offers extended high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

SLICK4-V5 Coaxial 2-way

SLICK5-V5 Coaxial 2-way

SLICK57-V1 Coaxial 2-way

SLICK6-V5 Coaxial 2-way

SLICK69.2-V5 Coaxial 2-way

SLICK69.3-V5 Coaxial 3-way

4” (100mm)

5.25” (133mm)

5.25” x 7.5” (133 x 190mm)

6.5” (165mm)

6” x 9” (150 x 222mm)

6” x 9” (150 x 222mm)

50 watts 150 watts 25 watts 88dB 66Hz - 25kHz 4Ω 1.7” (44mm)

70 watts 210 watts 35 watts 90dB 60Hz - 25kHz 4Ω 1.9” (49mm)

80 watts 240 watts 40 watts 91dB 54Hz - 25kHz 4Ω 2.1” (54mm)

80 watts 240 watts 40 watts 91dB 54Hz - 25kHz 4Ω 1.9” (49mm)

140 watts 420 watts 70 watts 93dB 50Hz - 25kHz 4Ω 3” (76mm)

160 watts 480 watts 80 watts 90dB 50Hz - 25kHz 4Ω 3” (76mm)

3.7” (94mm)

4.5” (115mm)

4.7”x 7.1” (120x180mm)

5.5” (139mm)

5.9” x 8.7” (150 x 220mm)

5.9” x 8.7” (150 x 220mm)

Slick S4

Slick S4

Slick S4

Slick S4

Slick S4

Slick S4

Component Speaker

FEATURES SILK DOME TWEETER

Silk dome tweeters deliver smooth high frequency handling to give your music definition and clarity

IMPP WOOFER CONE

Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction

SEPARATE CROSSOVER

External passive crossover network separates low and high frequencies and is superior to in-line filters

RUBBER IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Rubber surround provides superior linearity throughout the woofers excursion

Co-axial Speaker 2-way speaker contains a woofer and built-in tweeter

PEI Tweeter Offers extended high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

PULSE6C-V4 Component 2-way 6.5” (165mm) 80 watts 240 watts 40 watts 90dB 65Hz - 20kHz 4Ω 2.1” (53mm) 5.6” (141mm) Pulse S2, S4

Coaxial Speakers

FEATURES

PEI TWEETER

PEI dome tweeters deliver extended high frequency response

STEEL MESH GRILL

Steel mesh grill provides protection for the woofer cone

IMPP WOOFER CONE

Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction

RUBBER IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Rubber surround provides superior linearity throughout the woofers excursion

Component Woofer and tweeter that can be mounted apart for a better sound stage

Silk Dome Tweeter For smooth high frequency response

Steel Mesh Grill Provides excellent protection for the speaker

Torsion Basket Provides rigidity and support for motor and moving parts

MODELS Model Type Configuration Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

PULSE5-V4 Coaxial 2-way 5.25” (133mm) 50 watts 150 watts 25 watts 90dB 80Hz - 20kHz 4Ω 2” (50mm) 4.6” (117mm) Pulse S2, S4

PULSE6-V4 Coaxial 2-way 6.5” (165mm) 60 watts 180 watts 30 watts 91dB 65Hz - 20kHz 4Ω 2.1” (53mm) 5.6” (141mm) Pulse S2, S4

PULSE69-V4 Coaxial 3-way 6” x 9” (150 x 222mm) 100 watts 300 watts 50 watts 90dB 45Hz - 20kHz 4Ω 3.1” (78mm) 5.7” x 8.7” (149 x 222mm) Pulse S2, S4

SQL Component subwoofer

FEATURES FEMM MOTOR

FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion

MULTIROLL SURROUND

Specially developed foam rubber surround allows better linearity throughout the subwoofer’s excursion range

PAPER COMPOSITE CONE

Composite paper woofer cone delivers fast, accurate bass with double stitching for increased reliability

FEA

FEMM FEMM Motor Provides low distortion and linear flux saturation

Magnet Boot Removable rubber boot for magnet protection

Alloy Basket Machined, cast aluminium basket for high rigidity and support

Screw Terminal Allows heavy gauge cable to be connected

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

Multi-Roll Achieves better linearity throughout the subwoofer’s excursion range

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

CVEN12SW-V4 Subwoofer 12” (323mm) 1050 watts 2100 watts 525 watts 84dB 25Hz - 1.5kHz Dual 2Ω 2.7” 4 layer 7.9” (200mm) 11.2” (284mm) 1.5 - 2ft3 Blackair B2

Component Subwoofer

FEATURES FEMM MOTOR

FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion

PAPER COMPOSITE CONE

Composite paper woofer cone delivers fast, accurate bass with stitching for increased reliability

ALLOY TORSION BASKET

Alloy angular torsion chassis supports the moving parts of the woofer and the huge motor system

FEA

FEMM FEMM Motor Provides low distortion and linear flux saturation

Magnet Boot Removable rubber boot for magnet protection

Alloy Basket Machined, cast aluminium basket for high rigidity and support

Paper Composite cone Semi-pressed paper composite cone delivers outstanding clarity

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

CVEN6SW-V4 Subwoofer 6.5” (165mm) 150 watts 300 watts 75 watts 88dB 35Hz - 850kHz Dual 2Ω 1.5” 4 layer 4.2” (106mm) 5.5” (140mm) 0.3 - 1ft3 Blackair B2

Extreme Competition Subwoofer

Competition winning SPL subwoofer

FEATURES KEVLAR CONE

Non-pressed paper cone with woven Kevlar fibres provides extreme rigidity even under high SPL conditions

FLATWOUND VOICE COIL

4” Flat wire high temperature aluminium long wound dual 1Ω voice coil with flat wire gives unparalleled power handling and thermal performance

FEMM MOTOR

FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion.

Huge triple stack 450oz magnet array provides massive moving force for the motor system

FEA Magnet Boot Removable rubber boot for magnet protection

Alloy Basket Machined, cast aluminium basket for high rigidity and support

Black Hole Black Hole dustcap increases cone size for higher SPL (sound pressure level)

FEMM FEMM Motor Provides low distortion and linear flux saturation

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

BDC15SPL-V2 Competition SPL subwoofer 15” (392mm) 3000 watts 9000 watts 1500 watts RMS 89dB 20Hz - 850Hz Dual 1Ω 4” Flatwound 8.3” (210mm) 13.8” (350mm) 3 - ∞ft3 Blackdeath B2

Competition Subwoofer

FEATURES KEVLAR CONE

Non-pressed paper cone with woven Kevlar fibres provides extreme rigidity even under high SPL conditions

VOICE COIL

3” high temperature aluminium long wound dual 2Ω voice coil delivers extreme power handling and high efficiency

FEMM MOTOR

FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion.

Triple stack 300oz magnet array provides massive moving force for the motor system

FEA Magnet Boot Removable rubber boot for magnet protection

Alloy Basket Machined, cast aluminium basket for high rigidity and support

Black Hole Black Hole dustcap increases cone size for higher SPL (sound pressure level)

FEMM FEMM Motor Provides low distortion and linear flux saturation

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

BD12SPL-V2 SPL Subwoofer 12” (323mm) 1500 watts 4500 watts 750 watts RMS 86dB 20Hz - 850Hz Dual 2Ω 3” Long wound 7.6” (193mm) 11.1” (283mm) 2 - 3.5ft3

BD15SPL-V2 SPL Subwoofer 15” (392mm) 1500 watts 4500 watts 750 watts RMS 89dB 20Hz - 850Hz Dual 2Ω 3” Long wound 8.3” (210mm) 13.8” (350mm) 3 - 4.5ft3

Blackdeath B1

Blackdeath B1

Black Edition Component Subwoofer

FEATURES

PAPER COMPOSITE CONE

Composite paper woofer cone delivers fast, accurate bass and high efficiency

MULTIROLL SURROUND

Specially developed foam rubber surround allows better linearity throughout the subwoofer’s excursion range

TORSION BASKET

The angular torsion basket provides rigidity and support for the motor and moving parts of the subwoofer.

The 5 vented arms of the torsion basket cradle the coil and allow it to breathe cool air when in motion

FEA Magnet Boot Removable rubber boot for magnet protection

Torsion Basket Provides rigidity and support for motor and moving parts

Spring Terminal Allows ease of installation for heavy gauge cable

FEMM FEMM Motor Provides low distortion and linear flux saturation

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

BLACKAIR12D2-V5 Subwoofer 12” (323mm) 550 watts 1600 watts 275 watts 89dB 25Hz - 1.5kHz Dual 2Ω 2” 4 layer 7.3” (185mm) 11.1 (283mm) 1.5 - 2ft3 Blackair B2

Component Subwoofer

FEATURES

POLYGLASS CONE

Yellow poly-glass cone Designed using FEA (Finite Element Analysis) for optimum rigidity to weight ratio

SPRING TERMINAL

Spring terminal allows heavy gauge cable to be connected directly to the voice coil

FEMM MOTOR

FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion

FEA Magnet Boot Removable rubber boot for magnet protection

Torsion Basket Provides rigidity and support for motor and moving parts

Spring Terminal Allows ease of installation for heavy gauge cable

FEMM FEMM Motor Provides low distortion and linear flux saturation

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

BA10-V4 Subwoofer 10” (275mm) 450 watts 1300 watts 225 watts 88dB 30Hz - 1.7kHz Dual 2Ω 2” 4 layer 5.9” (150mm) 9.25” (235mm) 1 - 1.5ft3

BA12-V4 Subwoofer 12” (323mm) 550 watts 1600 watts 275 watts 89dB 25Hz - 1.5kHz Dual 2Ω 2” 4 layer 6.7” (170mm) 11.2” (285mm) 1.5 - 2ft3

Blackair B2

Blackair B2

Component Subwoofer

FEATURES

COMPOSITE CONE

The composite paper cone is extremely strong and lightweight for fast and punchy bass

SPRING TERMINAL

Nickel plated spring terminal allows heavy gauge speaker cable to be connected directly to the voice coil

TORSION BASKET

The angular torsion basket provides rigidity and support for the motor and moving parts of the subwoofer

FEA Magnet Boot Removable rubber boot for magnet protection

Torsion Basket Provides rigidity and support for motor and moving parts

Spring Terminal Allows ease of installation for heavy gauge cable

FEMM FEMM Motor Provides low distortion and linear flux saturation

FOAM Foam Surround Foam surround offers fast, precise damping of the cone

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

SLICK10-V3 Subwoofer 10” (275mm) 350 watts 1050 watts 175 watts 87dB 30Hz - 1.7kHz 4Ω 2” 4 layer 5” (126mm) 9.1” (232mm) 1 - 1.5ft3

SLICK12-V3 Subwoofer 12” (323mm) 400 watts 1200 watts 200 watts 87dB 25Hz - 1.5kHz 4Ω 2” 4 layer 5.2” (133mm) 10.8” (276mm) 1.5 - 2ft3

Slick B1

Slick B1

Component Subwoofer

FEATURES

RUBBER SURROUND

The Butyl rubber surround controls the movement of the woofer cone throughout the entire excursion cycle

SPRING TERMINAL

Nickel plated spring terminal allows heavy gauge speaker cable to be connected directly to the voice coil

BUMPED T-YOKE

Bumped t-yoke allows greater excursion of the voice coil delivering louder, lower bass

IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Torsion Basket Provides rigidity and support for motor and moving parts

Spring Terminal Allows ease of installation for heavy gauge cable

FEMM FEMM Motor Provides low distortion and linear flux saturation

FEA

RUBBER Rubber surround provides superior linearity throughout the woofers excursion

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

MODELS Model Type Speaker Size RMS Power Peak Power Minimum Input (RMS) Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

PULSE12-V4 Subwoofer 12” (323mm) 300 watts 900 watts 150 watts 88dB 25Hz - 1.5kHz 4Ω 2” 4 layer 5.1” (130mm) 10.8” (276mm) 1.5 - 2ft3 Pulse S2

Super Slim Active Bass Enclosure

FEATURES

CAST ALUMINIUM CHASSIS

Cast aluminium chassis provides maximum durability and keeps enclosure weight to a minimum

PASSIVE RADIATOR

Passive radiator technology delivers improved bass response without increasing enclosure size.

AUTO SENSE

Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire

FEA High Level Input Connect to speaker output of head unit

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

A.R.B.S.S. Anti Resonance Bass Support System

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Super Slim Shallow mounting depth

Steel Mesh Grill Provides excellent protection for the speaker

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

CVENC8-V4 CVEN 8 120 watts 240 watts 4Ω 3” x 9.6” x 13.5” (75mm x 245mm x 342mm) 2nd order acoustic suspension Slim Fit Bass Enclosure CVEN Bass 1 (Active)

Compact Bass Enclosure

FEATURES

SLOT PORT

High efficiency slot port delivers incredible bass response with minimal turbulence

A.R.B.S.S

Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass

COMPACT

Available in compact and ultra compact variants that deliver incredible bass from the smallest of footprints

High Level Input Connect to speaker output of head unit

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

A.R.B.S.S. Anti Resonance Bass Support System

Spring Terminal Allows ease of installation for heavy gauge cable

Box Grip Specially designed carry handle built into AR.B.S.S.

Slot Port Rectangular port offers higher efficiency and increased SPL

MODELS Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

CVENV6S-V4 CVEN 6SW 150 watts 300 watts Dual 4Ω

CVENV6L-V4 CVEN 6SW 150 watts 300 watts Dual 5Ω

8.7” x 13.8” x 8.7” (220mm x 350mm x 220mm)

8.7” x 21.7” x 8.7” (220mm x 550mm x 220mm)

4th order bass reflex 4th order bass reflex Ultra compact bass enclosure Compact bass enclosure Blackair B2 Blackair B2

SPL Subwoofer Enclosure

FEATURES BASS REFLEX

Dual slot ported 4th order bass reflex enclosure Delivers extremely high efficiency and depth of bass

SPRING TERMINAL

Spring terminal allows heavy gauge cable to be connected

A.R.B.S.S

Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass

Spring Terminal Allows ease of installation for heavy gauge cable

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Slot Port Rectangular port offers higher efficiency and increased SPL

A.R.B.S.S. Anti Resonance Bass Support System

Multi-Roll Achieves better linearity throughout the subwoofer’s excursion range

Black Hole Black Hole dustcap increases cone size for higher SPL (sound pressure level)

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

BDSPL15P-V1 Blackdeath 15 1200 watts 3600 watts Dual 2Ω 17” x 26.8” x 19.7” (431mm x 680mm x 500mm) 4th order bass reflex Pressurewedge Bass Enclosure Blackdeath B1

Active Subwoofer Enclosures

FEATURES

SLOT PORT

High efficiency slot port provides almost zero turbulence and delivers huge gains in SPL

CLASS D

Integrated monoblock Class D amplifier delivers the power for the subwoofer with much higher efficiency than traditional active amplifiersa

BANDPASS AND BASS REFLEX Available as bandpass or bass reflex variants

High Level Input Connect to speaker output of head unit

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Slot Port Rectangular port offers higher efficiency and increased SPL

A.R.B.S.S. Anti Resonance Bass Support System

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Black Hole Black Hole dustcap increases cone size for higher SPL (sound pressure level)

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

BDCBR12A-V1 Blackdeath 12 600 watts 1800 watts 4Ω

BDAC12A-V1 Blackdeath 12 600 watts 1800 watts 4Ω

14.6” x 25.6” x 16.9” (371mm x 660mm x 430mm)

17” x 26.8” x 19.7” (431mm x 680mm x 500mm)

4th order bass reflex 4th order bandpass Pressurewedge Bass Enclosure Pressurewedge Bass Enclosure Powerbox Bass 3 (Active) Powerbox Bass 4 (Active)

Active Subwoofer Enclosure

FEATURES AUTO SENSE

Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire

SLOT PORT

Huge slot port with flared ABS trim provides almost zero turbulence and delivers huge gains in SPL

INTEGRATED AMPLIFIER

Active enclosure with integrated power amplifier

High Level Input Connect to speaker output of head unit

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Slot Port Rectangular port offers higher efficiency and increased SPL

A.R.B.S.S. Anti Resonance Bass Support System

Active Enclosure Subwoofer enclosure with integrated amplifier

MODELS

Model Driver RMS Power Peak Power Impedance

BLACKAIRV12-V2 Blackair 12 550 watts 1600 watts 4Ω

Dimensions (H x W x D)

14.6” x 24.9” x 16.9” (371mm x 632mm x 429mm)

Configuration Enclosure Type Recommended Amp

4th order bass reflex Asymmetrical Bass Enclosure Powerbox Bass 2 (Active)

Super Slim Subwoofer Enclosure

FEATURES

SUPER SLIM

Extremely shallow mounting depth allows for easy installation in the tightest of spaces, ideally suited to pick up trucks

SPRING TERMINAL

Spring terminal allows heavy gauge cable to be connected

A.R.B.S.S

Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass

FEA Box Grip Specially designed carry handle built into AR.B.S.S.

FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

RUBBER A.R.B.S.S. Anti Resonance Bass Support System

Spring Terminal Allows ease of installation for heavy gauge cable

Super Slim Shallow mounting depth

Rubber surround provides superior linearity throughout the woofers excursion

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

BLACKAIRC12-V4 Blackair 12S 250 watts 750 watts 4Ω 15” x 29” x 5.4” (381mm x 738mm x 137mm) 2nd order acoustic suspension Slim Fit Bass Enclosure Blackair B2

Super Slim Subwoofer Enclosures

FEATURES

SLOT PORT

High efficiency slot port provides almost zero turbulence and delivers huge gains in SPL

A.R.B.S.S

Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass

STEEL MESH GRILLE

Steel mesh grille protects the speaker from damage

High Level Input Connect to speaker output of head unit

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Slot Port Rectangular port offers higher efficiency and increased SPL

IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Super Slim Shallow mounting depth

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Amplifier

OPTISOUNDAUTO8A-V2 OptiSound 8 300 watts 900 watts 4Ω

OPTISOUNDAUTO8-V2 OptiSound 8 300 watts 900 watts 4Ω

3” x 10.6” x 15” (71mm x 270mm x 380mm)

3” x 10.6” x 15” (71mm x 270mm x 380mm)

4th order bass reflex Slim Fit Bass Enclosure Powerbox Bass 1 (Active)

4th order bass reflex Slim Fit Bass Enclosure SLICKB1-V2

Subwoofer Enclosure

FEATURES AUTO SENSE

Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire

BOXGRIP

BoxGrip carry handle to aid lifting in and out of the vehicle

TURBO PORT

Flared port smooths air flow in and out of the enclosure to reduce distortion

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

TurboPort Dual flared port for smoother airflow and

Active Enclosure Subwoofer enclosure with integrated amplifier

High Level Input Connect to speaker output of head unit

Box Grip Specially designed carry handle built into AR.B.S.S.

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

SLICKSLR12A-V2 Slick S12 400 watts 1200 watts 4Ω

SLICKSLR12TA-V2 2 x Slick S12 800 watts 2400 watts 4Ω

14.4” x 16.1” x 16.9” (329mm x 410mm x 430mm)

14.4” x 29.3” x 16.9” (366mm x 745mm x 430mm)

4th order bass reflex Trapezius Bass Enclosure Powerbox Bass 1 (Active)

4th order bass reflex Trapezius Bass Enclosure Powerbox Bass 2 (Active)

Active Subwoofer Enclosure

FEATURES ACTIVE

Subwoofer enclosure with Class AB integrated power amplifier

AUTOSENSE

High level input with Autosense allows the amplifier to turn on and off without the need for a separate remote turn on wire

SLOT PORT

High efficiency slot port increases SPL and reduces turbulence

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Slot Port Rectangular port offers higher efficiency and increased SPL

IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

Active Enclosure Subwoofer enclosure with integrated amplifier

High Level Input Connect to speaker output of head unit

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

PULSEV8-V4 Pulse 8 200 watts 600 watts 4Ω

PULSEV12-V4 Pulse 12 300 watts 900 watts 4Ω

12.6” x 11.8” x 12.7” (320mm x 300mm x 322mm)

16.6” x 14.6” x 15.2” (422mm x 370mm x 385mm)

4th order bass reflex Trapezius Bass Enclosure Powerbox Bass 1 (Active)

4th order bass reflex Trapezius Bass Enclosure Powerbox Bass 1 (Active)

Tube Subwoofer Enclosure

FEATURES GOLD PLATED SCREW TERMINAL Heavy duty screw terminal allows heavy gauge speaker cable to be connected

STEEL MESH GRILL

Large hexagon mesh grill provides protection for the woofer cone

BASS REFLEX

Ported enclosure delivers higher SPL and boosted bass response

IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

TUBE Steel Mesh Grill Provides excellent protection for the speaker

Bass Tube Cylindrical bass reflex subwoofer enclosure

Bass Reflex Ported subwoofer enclosure delivers boosted bass response

Turbo Port Flared port helps smooth airflow and reduce noise

Twin Post Twin post terminal allows heavy gauge cable to be connected

MODELS

Model Driver RMS Power Peak Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

PULSET12-V4 Pulse 12 300 watts 900 watts 4Ω 13.2” x 26” x 13.2” (335mm x 660mm x 335mm) 4th order bass reflex Cylindrical Tube Enclosure Pulse S2

SQ Competition Amplifiers

FEATURES CLASS AB TOPOLOGY

Class AB topology delivers superior sound quality

TOP MOUNTED CONTROLS

Top mount controls make setup after installation much more convenient than traditional designs

AUTO SENSE

High level input with Autosense allows the amplifier to turn on and off without the need for a separate remote turn on wire

High Level Input Connect to speaker output of head unit

Pro Audio Superior audiophile sound quality

Subsonic Filter Limits very low frequency output

High Pass Filter Limits low frequency output

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

CVENS4-V4 4 channel

CVENC6-V4 6 channel

2.4” x 18.5” x 11.4” (60mm x 470mm x 290mm)

2.4” x 25.5” x 11.4” (60mm x 647mm x 290mm)

2 x 70 + 2 x 130 watts 2 x 100 + 2 x 180 watts N/A 2 x 70 + 1 x 360 watts N/A N/A N/A 1120 watts 20Hz - 20kHz LP / HP / BP / Flat 15Hz - 4kHz Class AB

4 x 70 + 2 x 130 watts 4 x 100 + 2 x 180 watts N/A 4 x 70 + 1 x 360 watts N/A N/A N/A 1520 watts 10Hz - 20kHz LP / HP / BP / Flat 15Hz - 4kHz Class AB

SPL Competition Monoblock Amplifiers

Competition winning SPL amplifier

FEATURES

ULTRA CLASS D TOPOLOGY

Ultra Class D topology delivers the highest possible efficiency

MULTIPLE 0 AWG INPUTS

3 x 0 AWG inputs allow for maximum current transfer from the power source to the amplifier

AMPLIFIER STRAPPING

Amplifier strapping circuit allows 2 identical amplifiers to deliver their combined power via a single channel

Class D High efficiency amplifier ideal for bass

MOSFET High switching speed and greater stability

Subsonic Filter Limits very low frequency output

Parametric Bass Enhance variable frequency and bass boost

Remote Gain Amplifier gain can be controlled from the front of the vehicle

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

BDB1-V1 Competition Monoblock

BLACKDEATHBASS2-V1 Competition Monoblock

2.2” x 25.5” x 6.5” (54mm x 647mm x 165mm)

3” x 37.4” x 11.8” (76mm x 950mm x 299mm)

N/A N/A N/A 1 x 800 watts 1 x 1400 1 x 2200 watts 1 x 3500 watts 7000 watts 10Hz - 500Hz LP / Subsonic 10Hz - 220Hz Class D

N/A N/A N/A 1 x 2650 watts 1 x 5200 watts 1 x 9000 watts N/A 29,000 watts 10Hz - 350Hz LP / Subsonic 10Hz - 250Hz Class D

SPL Competition Stereo Amplifier

FEATURES CLASS AB TOPOLOGY

Class AB topology delivers superior sound quality

TOP MOUNTED CONTROLS

Top mount controls make setup after installation much more convenient than traditional designs

1 OHM STABILITY

Low impedance drive capability allows 1 Ohm stereo operation

High Level Input Connect to speaker output of head unit

Pro Audio Superior audiophile sound quality

Subsonic Filter Limits very low frequency output

High Pass Filter Limits low frequency output

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

BLACKDEATHS2-V4 2 channel 2.4” x 25.5” x 11.4” (60mm x 647mm x 290mm) 2 x 350 watts 2 x 700 watts 2 x 1000 watts 1 x 1400 watts 1 x 2000 watts N/A N/A 4000 watts 20Hz - 20kHz LP / HP / BP / Flat 15Hz - 4kHz Class AB

Power Amplifiers

FEATURES CLASS D TOPOLOGY

Class D topology delivers extremely high efficiency

ACTIVE CROSSOVER

Onboard active high pass, low pass and bypass crossover

PIANO BLACK

High gloss piano black heatsink finishing

Subsonic Filter Limits very low frequency output

MOSFET High switching speed and greater stability

Class D High efficiency amplifier ideal for bass

High Pass Filter Limits low frequency output

Parametric Bass Enhance variable frequency and bass boost

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

BLACKAIRS4-V1 4 channel

BLACKAIRCH5-V1 5 channel

BLACKAIRB2-V1 Mono amp

2.1” x 13” x 6.5” (54mm x 329mm x 165mm)

2.1” x 20.4” x 6.5” (54mm x 520mm x 165mm)

2.1” x 19.6” x 6.5” (54mm x 497mm x 165mm)

4 x 100 watts 4 x 150 watts N/A 2 x 300 watts N/A N/A N/A 1200 watts 20Hz - 20kHz LP / HP / Flat 0Hz - 750Hz Class D

4 x 90 watts N/A N/A 1 x 300 watts 1 x 515 N/A N/A 1750 watts 10Hz - 20kHz LP / HP / Subsonic 0Hz - 200Hz Hybrid

N/A N/A N/A 1 x 500 watts 1 x 1000 watts 1 x 1500 watts N/A 3000 watts 10Hz - 500Hz LP / Subsonic 0Hz - 220Hz Class D

Power Amplifiers

FEATURES EXTRUDED HEATSINK

Extruded aluminium provides superior heat dissipation and thermal performance

CAST CONNECTORS

High quality cast connectors allow for heavey gauge cable to be connected

AUTOSENSE

High level input with Autosense allows the amplifier to turn on and off without the need for a separate remote turn on wire

Subsonic Filter Limits very low frequency output

MOSFET High switching speed and greater stability

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

High Pass Filter Limits low frequency output

Bass Enhance Bass boost centred at 45Hz

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

SLICKS4-V2 4 channel

SLICKB1-V2 Mono amp

2” x 13” x 7.6” (50mm x 330mm x 194mm)

2” x 9.1” x 7.6” (50mm x 230mm x 194mm)

4 x 75 watts 4 x 100 watts N/A 2 x 200 watts N/A N/A N/A 800 watts 20Hz - 20kHz LP / HP / BP / Flat 20Hz - 4kHz Class AB

N/A N/A N/A 1 x 200 watts 1 x 350 watts 1 x 500 watts N/A 1000 watts 10Hz - 500Hz LP / Subsonic 10Hz - 150Hz Class D

Power Amplifiers

FEATURES FEATURES WIDEBAND ACTIVE CROSSOVER Onboard HPF/LPF/FLAT crossover fully adjustable from 50Hz ~ 4kHz

AUTOSENSE

High level input with Autosense allows the amplifier to turn on and off without the need for a separate remote turn on wire

EXTRUDED HEATSINK

Extruded aluminium heatsink provides superior thermal performance

High Level Input Connect to speaker output of head unit

MOSFET High switching speed and greater stability

Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

High Pass Filter Limits low frequency output

Class AB Low noise, minimal distortion for superior sound quality

Low Pass Filter Limits the amount of high frequency output

MODELS Model Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo RMS @ 2Ω Stereo RMS @ 1Ω Stereo RMS @ 4Ω Mono RMS @ 2Ω Mono RMS @ 1Ω Mono RMS @ 0.5Ω Mono Maximum Power Frequency Response Crossover Type Crossover Range Topology

PULSES2-V4 2 channel

PULSES4-V4 4 channel

2” x 9” x 7.6” (50mm x 230mm x 194mm)

2” x 14.2” x 7.6” (50mm x 360mm x 194mm)

2 x 60 watts 2 x 75 watts N/A 1 x 150 watts N/A N/A N/A 300 watts 20Hz - 20kHz LP / HP / Flat 50Hz - 4kHz Class AB

4 x 60 watts 4 x 75 watts N/A 2 x 150 watts N/A N/A N/A 600 watts 20Hz - 20kHz LP / HP / Flat 50Hz - 4kHz Class AB