Vibe Car Audio Catalogue 2017 by VIBE AUDIO

“Bass… the life and rhythm in all music, without it you’re only hearing half the song…” Words written by our founder and owner some 20 years ago and words we still stand by and and instil into every VIBE product today. Music has an intrinsic grace that touches the human soul, it is the language of our passions and feelings. To truly listen to the sounds that move us most we have to hear them as they were truly intended, with every detail intact. The greatest music demands the greatest sound reproduction equipment. Welcome to VIBE

Founder & CEO

Series 7

“With the CVEN series, the values that forged Britain’s engineering heritage have been applied to create the very pinnacle of car audiophile sound quality. Each CVEN product is manufactured with materials specially selected for their inherent qualities to perform without any constraint of cost.”

Series 5

“When too much is just enough! If you are looking for the meanest, loudest and deadliest car audio products on the planet, then look no further than the BlackDeath series of high performance products, featuring ear-splitting pro audio speakers, ground pounding SPL subwoofers and the awesome power of our new full range mono amplifiers”

OUR RANGES For over 20 years VIBE has pushed the boundaries of technology and innovation for all our in car audio products. Our product range has grown organically over our history as customers have demanded a wider and more diverse range of products with the signature VIBE styling and performance. We are proud to present our 2017 product portfolio with our entry level PULSE range, the brand new SLICK range, BLACKAIR range, our BLACKDEATH SPL competition range and our CVEN SQ competition range.

Series 3

“Back in black! The Blackair series is quite simply the best bang per buck car audio in the world. Multi award winning CBR active bass enclosures, all new black edition speakers and subwoofers, mono, 4 and 5 channel amplifiers with beautiful piano black finish”

Series 2

“Our largest and most flexible range of car audio! The Slick series incorporates shallow mount high efficiency, Euro fit speakers, amplifiers with high level input and auto turn on and a flexible active crossover all complimented by a range of active enclosures”

Series 1

“Low budget doesn’t have to mean low performance! The PULSE series of affordable car audio delivers all of the brand values synonymous with VIBE. Entry level never sounded so good”

Coaxial Speakers

•• PEI dome tweeters deliver extended high frequency response.

Coaxial Speakers

•• Oversized 50mm and 40mm PEI tweeters delivering an incredibly wide frequency response

•• Steel mesh grill provides protection for the woofer cone.

and highly accurate sound reproduction.

•• Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

•• Silk dome tweeter diaphragm with extreme high frequency performance. •• High quality capacitor delivers improved high frequency response.

•• Lightweight paper cone designed for ultra-efficiency and smooth bass response. •• Eurofit basket provides maximum installation compatibility.

•• Removable steel mesh grill provides protection for the woofer without sacrificing high frequency response.

•• 92db and 94db sensitivity rating giving class leading speaker efficiency.

Model

PULSE4-V4

PULSE5-V4

PULSE57-V4

PULSE6-V4

PULSE69-V4

2-way

3-way

Speaker Size

4” (100mm)

5.25” (133mm)

5.25” x 7.5” (133 x 190mm)

6.5” (165mm)

6” x 9” (150 x 222mm)

Peak/RMS Power

120W\40W

150W/50W

180W/60W

300W/100W

83dB

90dB

85dB

91dB

90dB

100Hz - 20kHz

80Hz - 20kHz

65Hz - 20kHz

45Hz - 20kHz

4Ω

1.7” (44mm)

2” (50mm)

2.1” (53mm) 4.7”x 7.1” (120x180mm) PULSES4-V4

2.1” (53mm)

Configuration

Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter

3.7” (94mm)

4.6” (117mm)

Recommended Amp

PULSES4-V4

3.1” (78mm) 5.7” x 8.7” 5.6” (141mm) (149 x 222mm) PULSES4-V4 PULSES4-V4

Model

SLICK4-V7

SLICK5-V7

SLICK57-V7

SLICK6-V7

SLICK69.3-V7

2-way

Speaker Size

4” (100mm)

5.25” (133mm)

Peak/RMS Power

150W/50W

210W/70W

2-way 5.25” x 7.5” (133 x 190mm) 240W/80W

240W/80W

3-way 6” x 9” (150 x 222mm) 480W/160W

91dB

92dB

94dB

90dB

66Hz - 25kHz

60Hz - 25kHz

54Hz - 25kHz

50Hz - 25kHz

4Ω

Mounting Depth

1.6” (43mm)

1.8” (46mm)

2.4” (61mm)

Mounting Diameter

3.7” (94mm)

4.4” (112 mm)

Yes

2.1” (53mm) 5”x 7.1” (126x180mm) No

Yes

3” (76mm) 5.7” x 8.5” (145 x 215mm) Yes

SLICKS4-V2

Configuration

Sensitivity Frequency Response Impedance

Grill Included Recommended Amp

6.5” (165mm)

5.6” (142mm)

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR69-V2 3-way 6” x 9” (150 x 222mm) 525W/175W 90dB 50Hz - 25kHz 4Ω 3.1” (78mm) 5.9” x 8.7” (150 x 220mm) BLACKAIRS4-V1

Component Speaker

•• Silk dome tweeters deliver smooth high frequency handling to give your music definition

•• Ultra compact 25mm silk dome tweeter for an exceptional level of sound quality matched

and clarity. great vocal reproduction.

•• Fibreglass cone delivers tight, accurate bass with excellent transient response. •• Multifit basket with shallow mounting depth provides maximum installation compatibility.

with high efficiency.

•• Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and

Component Speaker

•• Lightweight paper cone and foam surround designed for ultra-efficiency and smooth bass

•• Silk dome tweeter delivers smooth high frequency response.

response.

•• External passive crossover network separates low and high frequencies and is superior to in-line filters.

•• Eurofit basket provides maximum installation compatibility. •• 92db and 94db sensitivity rating giving class leading speaker efficiency.

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth

PULSE6C-V4 2-way 6.5” (165mm) 240W/80W 90dB 65Hz - 20kHz 4Ω 2.1” (53mm)

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth

Mounting Diameter

5.6” (141mm)

Mounting Diameter

Recommended Amp

PULSES4-V4

Recommended Amp

SLICK5C-V7

SLICK6C-V7

2-way

5.25” (130mm)

6.5” (165mm)

240W/80W

270W/90W

93dB

94dB

60Hz - 25kHz

54Hz - 25kHz

4Ω

1.8” (46mm)

2.4” (61mm)

4.4” (112mm)

5.6” (142mm)

SLICKS4-V2

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR5C-V1

BLACKAIR6C-V1

2-way

5.25” (133mm)

6.5” (165mm)

270W/90W

345W/115W

88dB

90dB

60Hz - 25kHz

55Hz - 25kHz

4Ω

2.2” (55mm)

2.3” (58mm)

4.6” (116mm)

5.5” (139mm)

BLACKAIRS4-V1

Black Edition - 2 Way Component Speaker

•• High grade fibreglass cone delivers fast accurate bass and clear vocal reproduction. •• 28mm silk dome tweeter provides extended high frequency response and high power handling.

Black Edition - 3 Way Component Speaker

BMW Front Speaker Kit

•• A market first for the automotive sector, the Blackair 63C features a 3.5” midrange with a

•• Composite cone using paper, and wood fibres for a lightweight and rigid cone producing a

concentrically mounted tweeter for a true point source and superior staging. •• Separate passive crossovers for the woofer and concentric driver allow the use of higher

•• Passive crossover featuring high quality MKT capacitors and tweeter attenuation.

quality components and maximise installation flexibility.

natural vocal reproduction. •• All drivers feature powerful neodymium motors which deliver maximum magnetic force with shallow installation depth.

•• High grade fibreglass cone delivers fast accurate bass and clear vocal reproduction.

•• Custom tooled 8 inch subwoofer directly replaces the under seat installed factory speakers delivering improved bass performance.

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BLACKAIR6C-V6B 2-way 6.5” (165mm) 360W/120W 88dB 45Hz - 25kHz 4Ω 2.6” (65mm) 5.2” (143mm) BLACKAIRS4-V1

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

Model

OPTISOUNDBMW8-V4

OPTISOUNDBMW4-V4

1-way

2-way

Speaker Size

8” (200mm)

4” (100mm)

Peak/RMS Power

345W/115W

90dB

55Hz - 25kHz

4Ω

BMW

E 82/87/88/90/91/92/93

SLICKS4-V2

BLACKAIR63C-V6B

BLACKAIR3C-V6B

3-way

2 way

6.5” (165mm)

3.5” (90mm)

390W/130W

270W/90W

88dB

45Hz - 25kHz

400Hz - 25kHz

4Ω

2.6” (65mm)

1.6” (40mm)

Vehicle Manufacturer

5.2” (143mm)

2.7” (69mm)

Fitment

BLACKAIRS4-V1

Configuration

Sensitivity Frequency Response Impedance

Recommended Amp

Golf 6 Front Speaker Kit

•• Composite cone using paper, and wood fibres for a lightweight and rigid cone producing a natural vocal reproduction. •• Allows easy fitment of the woofer into the existing location with no modifications required. •• 25mm silk dome tweeter delivers natural high frequency response.

2 Way Component Speaker

•• 28mm silk dome tweeter delivers crystal clear high frequency response. •• Hand layered carbon cone provides boosted bass response. •• Passive crossover featuring high quality MKT capacitors and tweeter attenuation.

Component / Coaxial / Speaker

•• The strong, deeply sculpted rectangular IMPP woofer cone gives 20% more surface area that a conventional 6×9. •• The removable 2” Midrange and 1” Titanium Tweeter can be mounted on the woofer in a tri-axial configuration or separately as a component speaker. •• The removable rubber boot provides protection for the subwoofer’s motor.

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response

OPTISOUNDGOLF6F-V4 2-way 6.5” (165mm) 360W/120W 90dB 55Hz - 25kHz

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response

Impedance

4Ω

Impedance

Vehicle Manufacturer

Mounting Depth

Fitment Recommended Amp

Golf 6,7, Scirocco, Polo, Passat and other VAG derivatives SLICKS4-V2

Mounting Diameter Recommended Amp

BLACKDEATH6C-V6 2-way 6.5” (165mm) 420W/140W 93dB 45Hz - 25kHz 4Ω 2.6” (65mm) 5.6” (143mm) CVENS2-V4

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

BDQB69-V2 3-way 7.4” x 10.1” (188 x 257mm) 600W/200W 93dB 30Hz - 25kHz 4Ω 3.9” (100mm) 6.75” x 8.8” (162 x 224mm) CVENS2-V4

2 Way Component Speaker

3 Way Component Speaker

•• Wide band tweeter features a 22mm voice coil and wide surround to deliver an extended

•• 3 way passive crossover with selectable 90Hz high pass filter for the woofer and Mundorf

Competition Winning SQ Speakers bandwidth that would usually require multiple drivers. •• Perfectly matched midwoofer and wide bandwidth tweeter produce an almost linear response without the need for any equalisation in the crossover. •• A single Mundorf reference capacitor is used to provide a high pass filter for the tweeter without adding colouration to the sound.

reference capacitor for the tweeter. •• Designed specifically for high quality musical reproduction, with particular attention to the all important vocal region. •• Tweeter features a removable, large hexagon mesh grille secured by the magnetic force of the motor.

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

CVEN62C-V4 2-way 6.5” (165mm) 240W/120W 91dB 45Hz -20Hz 4Ω 2.9” (73mm) 5.6” (143mm) CVENS4-V4

Model Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth

CVEN63C-V4 3-way 6.5” (165mm) 290W/130W 91dB 45Hz - 20kHz 4Ω 2.9” (73mm)

Mounting Diameter

5.6 ” (143mm)

Recommended Amp

CVENCH6-V4

Pro Audio Speakers

Pro Audio Speaker With Horn

Pro Audio Tweeter

•• Composite paper cone delivers fast accurate bass coupled with high efficiency.

•• Cast aluminium flange with signature CNC detailing.

•• Specifically designed dust cap increases effective surface area for increased SPL.

•• High efficiency bullet tweeter design.

•• Cast aluminium gasket with signature CNC detailing with a high-end aesthetic to

•• Huge motor delivers extreme power and high SPL.

complement the best competition level installs.

Model Type Configuration Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Mounting Depth Mounting Diameter Recommended Amp

complement the best competition level installs.

Model

BDPRO4T-V1

BDPRO8M-V1

BDPRO10W-V1

Midrange

Woofer

Configuration

1-way

Speaker Size

12” (304mm)

Speaker Size

4” (100mm)

6.5” (170mm)

8” (203mm)

10” (254mm)

Peak/RMS Power

900W/300W

Peak/RMS Power

300W/100W

450W/150W

600W/200W

750W/250W

Sensitivity

92dB

93dB

94dB

140Hz - 9kHz

65Hz - 7.5kHz

55Hz - 3.5kHz

3.2Ω

4Ω

68mm (2.7”)

3.4” (85mm)

4.2” (106mm)

Mounting Diameter

146mm (5.7”)

7.3” (185mm)

9.25” (235mm)

Recommended Amp

CVENS2-V4

Frequency Response Impedance Mounting Depth

BDPRO12-V1

Model

BDPRO6M-V4

2-way

93dB 45Hz - 20kHz 4Ω 6.8” (173mm) 11.2” (285mm) CVENS2-V4

Configuration

Sensitivity Frequency Response Impedance

1-way

107dB 1.5kHz - 20kHz 4Ω

Mounting Depth

1.7” (65mm)

Mounting Diameter

3.4” (93mm)

Recommended Amp

CVENS2-V4

Component Subwoofer

•• The Butyl rubber surround controls the movement of the woofer cone throughout the entire excursion cycle.

Component Subwoofers

•• The composite paper cone is extremely strong and lightweight for fast and punchy bass. •• Nickel plated spring terminal allows heavy gauge speaker cable to be connected directly

•• Nickel plated spring terminal allows heavy gauge speaker cable to be connected directly to the voice coil.

to the voice coil. •• The angular torsion basket provides rigidity and support for the motor and moving parts of

•• Bumped t-yoke allows greater excursion of the voice coil delivering louder, lower bass.

Model

SLICK10-V3

SLICK12-V3

Speaker Size

12” (323mm)

Speaker Size

10” (275mm)

12” (323mm)

Peak/RMS Power

900W/300W

Peak/RMS Power

1050W/350W

1200W/400W

87dB

30Hz - 1.7kHz

25Hz - 1.5kHz

4Ω

2” 4 layer

5” (126mm)

5.2” (133mm)

9.1” (232mm) 1 - 1.5ft3

10.8” (276mm) 1.5 - 2ft3

SLICKB1-V2

Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

PULSE12-V4

the subwoofer.

88dB 25Hz - 1.5kHz 4Ω 2” 4 layer 5.1” (130mm) 10.8” (276mm) 1.5 - 2ft3 PULSES2-V4

Model

Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

Component Subwoofers

•• Yellow poly-glass cone Designed using FEA (Finite Element Analysis) for optimum rigidity to weight ratio. •• Spring terminal allows heavy gauge cable to be connected directly to the voice coil. •• FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion.

Black Edition Component Subwoofer

Super Slim Component Subwoofer

•• Composite paper woofer cone delivers fast, accurate bass and high efficiency.

•• Specially developed foam rubber surround allows better linearity throughout the subwoofer’s

•• Spring terminal allows heavy gauge cable to be connected directly to the voice coil.

excursion range.

•• Extremely shallow mounting depth allows for easy installation in the tightest of spaces, ideal

•• The angular torsion basket provides rigidity and support for the motor and moving parts of

for small vehicles and trucks.

the subwoofer. •• The torsion basket’s 5 vented arms cradle the coil and allow it to breathe cool air.

Model

BLACKAIR12D2-V5

Model

BLACKAIR12S-V6

BA10-V4

BA12-V4

Speaker Size

10” (275mm)

12” (323mm)

Speaker Size

12” (323mm)

Speaker Size

12” (323mm)

Peak/RMS Power

1300W/450W

1600W/550W

Peak/RMS Power

1600W/550W

Peak/RMS Power

750W/250W

88dB

89dB

30Hz - 1.5kHz

25Hz - 1.2kHz

Impedance

Dual 2Ω

Impedance

Dual 2Ω

Impedance

Voice Coil

2” 4 layer

Voice Coil

2” 4 layer

Voice Coil

5.4” (137mm)

6.1” (155mm)

9.25” (235mm) 1 - 1.5ft3 BLACKAIRB2-V1

Sensitivity Frequency Response

Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

Sensitivity Frequency Response

89dB 25Hz - 1.5kHz

Sensitivity Frequency Response

Mounting Depth

7.3” (185mm)

Mounting Depth

11.2” (285mm) 1.5 - 2ft3

Mounting Diameter

11.1 (283mm) 1.5 - 2ft3

Mounting Diameter

BLACKAIRB2-V1

Recommended Amp

Enclosure Volume

BLACKAIRB2-V1

Enclosure Volume Recommended Amp

83dB 25Hz - 1.5kHz 4Ω 5” 4 layer 2.2” (55mm) 11.3 (287mm) 0.5 - 1ft3 BLACKAIRB2-V1

Extreme Competition Subwoofer

Competition Subwoofer

Competition Winning SPL Subwoofer •• Non-pressed paper cone with woven Kevlar fibres provides extreme rigidity even under high SPL conditions.

•• 4” Flat wire high temperature aluminium long wound dual 1Ω voice coil with flat wire gives unparalleled power handling and thermal performance.

•• 3” high temperature aluminium long wound dual 2Ω voice coil delivers extreme power handling and high efficiency.

•• FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux

saturation and minimal distortion. Huge triple stack 450oz magnet array provides massive

saturation and minimal distortion. Triple stack 300oz magnet array provides massive

moving force for the motor system.

moving force for the motor system. Model

Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance

BDC15SPL-V2 15” (392mm) 9000W/3000W 89dB 20Hz - 850Hz Dual 1Ω

Model

BD12SPL-V2

BD15SPL-V2

Speaker Size

12” (323mm)

15” (392mm)

4500W/1500W

86dB

89dB

20Hz - 850Hz

Dual 2Ω

3” Long wound

7.6” (193mm)

8.3” (210mm)

11.1” (283mm) 2 - 3.5ft3

13.8” (350mm) 3 - 4.5ft3

BLACKDEATHM8K-V6

Peak/RMS Power Sensitivity Frequency Response Impedance

Voice Coil

4” Flatwound

Voice Coil

Mounting Depth

8.3” (210mm)

Mounting Depth

Mounting Diameter Enclosure Volume Recommended Amp

13.8” (350mm) 3 - ∞ft3 BLACKDEATHM21K-V6

Mounting Diameter Enclosure Volume Recommended Amp

SQL Component Subwoofer

Component Subwoofer

Competition Winning SQ Subwoofer

•• FEMM (Finite Element Method Magnetics) designed motor system ensures linear flux saturation and minimal distortion.

•• Specially developed foam rubber surround allows better linearity throughout the subwoofer’s excursion range.

•• Composite paper woofer cone delivers fast, accurate bass with stitching for increased reliability.

•• Composite paper woofer cone delivers fast, accurate bass with double stitching increased reliability.

for

•• Alloy angular torsion chassis supports the moving parts of the woofer and the huge motor system.

Model Speaker Size Peak/RMS Power Sensitivity Frequency Response Impedance Voice Coil Mounting Depth Mounting Diameter Enclosure Volume Recommended Amp

CVEN12SW-V4 12” (323mm) 2100W/1050W 84dB 25Hz - 1.5kHz Dual 2Ω 2.7” 4 layer 7.9” (200mm)

Model

CVEN6SW-V4

Speaker Size

6.5” (165mm)

Peak/RMS Power Sensitivity Frequency Response Impedance Voice Coil

300W/150W 88dB 35Hz - 850kHz Dual 2Ω 1.5” 4 layer

Mounting Depth

4.2” (106mm)

11.2” (284mm) 1.5 - 2ft3

Mounting Diameter

5.5” (140mm) 0.3 - 1ft3

BLACKAIRB2-V1

Recommended Amp

Enclosure Volume

BLACKAIRB2-V1

Tube Subwoofer Enclosure

Active Subwoofer Enclosure

•• Heavy duty screw terminal allows heavy gauge speaker cable to be connected.

•• Subwoofer enclosure with Class AB integrated power amplifier.

•• Large hexagon mesh grill provides protection for the woofer cone.

•• High level input with Autosense allows the amplifier to turn on and off without the need for

•• Ported enclosure delivers higher SPL and boosted bass response.

a separate remote turn on wire.

Subwoofer Enclosure

•• Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire. •• BoxGrip carry handle to aid lifting in and out of the vehicle.

•• High efficiency slot port increases SPL and reduces turbulence.

•• Flared port smooths air flow in and out of the enclosure to reduce distortion.

Model

PULSET12-V4

Model

PULSEV8-V4

PULSEV12-V4

Model

SLICKSLR12A-V2

SLICKSLR12TA-V2

Driver

Pulse 12

Driver

Pulse 8

Pulse 12

Driver

Slick S12

2 x Slick S12

600W/200W

900W/300W

1200W/400W

2400W/800W

4Ω

12.6” x 11.8” x 12.7” (320mm x 300mm x 322mm)

16.6” x 14.6” x 15.2” (422mm x 370mm x 385mm)

14.4” x 16.1” x 16.9” (329mm x 410mm x 430mm)

14.4” x 29.3” x 16.9” (366mm x 745mm x 430mm)

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

900W/300W 4Ω 13.2” x 26” x 13.2” (335mm x 660mm x 335mm) 4th order bass reflex Cylindrical Tube Enclosure PULSES2-V4

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration

Peak/RMS Power Impedance Dimensions (H x W x D)

4th order bass reflex

Enclosure Type

Trapezius Bass Enclosure

Enclosure Type

Configuration

Trapezius Bass Enclosure

Recommended Amp

Powerbox Bass 1 (Active)

Recommended Amp

Powerbox Bass 1 (Active)

Powerbox Bass 2 (Active)

Super Slim Subwoofer Enclosures

•• High efficiency slot port provides almost zero turbulence and delivers huge gains in SPL. •• Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass. •• Steel mesh grille protects the speaker from damage.

Active Subwoofer Enclosure

•• Auto sense circuit allows the amplifier to turn on and off when using high level input without

Blackair Series Ultra Shallow Passive Radiator Bass Enclosure

•• Passive radiator technology delivers huge bass performance from a compact enclosure. •• Ultra slim profile allows east fitment in tight spaces, ideal for use with pick up trucks.

the need for a remote turn on wire. •• Huge slot port with flared ABS trim provides almost zero turbulence and delivers huge gains

•• Steel mesh grill protects the woofer and passive radiator from any potential damage. •• Twin post terminal allows heavy gauge cable to be connected.

in SPL. •• Active enclosure with integrated power amplifier.

•• A.R.B.S.S. (Anti resonance bass support system) with integrated box grip.

Model

OPTISOUNDAUTO8A-V2

Model

BLACKAIRV12-V2

Model

BLACKAIRT12S-V6

Driver

OptiSound 8

Driver

Blackair 12

Driver

BLACKAIR 8S

Peak/RMS Power

900W/300W

Peak/RMS Power

900W/300W

Impedance Dimensions (H x W x D) Configuration Enclosure Type Amplifier

4Ω 3.1” x 11.2” x 15” (90mm x 315mm x 400mm) 4th order bass reflex Slim Fit Bass Enclosure Powerbox Bass 1 (Active)

Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

1600W/550W 4Ω 14.6” x 24.9” x 16.9” (371mm x 632mm x 429mm) 4th order bass reflex Asymmetrical Bass Enclosure Powerbox Bass 2 (Active)

Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amplifier

2Ω 14.2” x 21.1” x 5.2” (361mm x 535mm x 131mm) 2nd order passive radiator Ultra Shallow Bass Enclosure SLICKB1-V2

BlackAir Series Compact Passive Radiator Bass Enclosure

BlackAir Series Ultra Compact Passive Radiator Bass Enclosure

•• Passive radiator technology delivers huge bass performance from a compact enclosure.

•• Unique mounting system allows fitment in most wheel wells to maximise space.

•• Dual “balanced” passive radiator configuration provides incredible sound quality.

•• Steel mesh grill protects the woofer and passive radiator from any potential damage.

•• Quad post terminal allows series or parallel wiring of the dual voice coils for maximum

flexibility.

flexibility. •• Ultra compact enclosure allows fitment in the smallest of spaces.

Model

BLACKAIRP8-V6

Model

BLACKAIRC12-V6

Model

BLACKAIRB8-V6

Driver

BlackAir 8

Driver

BlackAir 8

Driver

BlackAir 8

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amplifier

1500W/500W Dual 4Ω 18.8” x 19.9” x 5.9” (477mm x 505mm x 150mm) 2nd order passive radiator Compact Bass Enclosure SLICKB1-V2

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amplifier

1500W/500W Dual 4Ω 13.8” x 15.8” x 11.4” (351mm x 402mm x 290mm) 2nd order passive radiator Compact Bass Enclosure SLICKB1-V2

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amplifier

1200W/400W Dual 4Ω 10.4” x 11.1” x 11.5” (264mm x 282mm x 292mm) 2nd order passive radiator Ultra compact Bass Enclosure SLICKB1-V2

Compact Bass Enclosure

Super Slim Active Bass Enclosure

•• Cast aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.

•• High efficiency slot port delivers incredible bass response with minimal turbulence. •• Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass.

•• Passive radiator technology delivers improved bass response without increasing enclosure size.

•• Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.

•• Available in compact and ultra compact variants that deliver incredible bass from the smallest of footprints.

Model

CVENC8-V4

Driver

CVEN 8

Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

240W/120W 4Ω 3” x 9.6” x 13.5” (75mm x 245mm x 342mm) 2nd order acoustic suspension Slim Fit Bass Enclosure CVEN Bass 1 (Active)

Model Driver Peak/RMS Power Impedance Dimensions (H x W x D) Configuration Enclosure Type Recommended Amp

CVENV6S-V4 CVEN 6SW 300W/150W 4Ω

CVENV6L-V4 CVEN 6SW 300W/150W 4Ω

8.7” x 13.8” x 8.7” (220mm x 350mm x 220mm)

8.7” x 21.7” x 8.7” (220mm x 550mm x 220mm)

4th order bass reflex 4th order bass reflex Ultra compact bass enclosure Compact bass enclosure BLACKAIRB2-V1 BLACKAIRB2-V1

POWER AMPLIFIERS

•• Onboard HPF/LPF/FLAT crossover fully adjustable from 50Hz ~ 4kHz.

•• Extruded aluminium provides superior heat dissipation and thermal performance.

•• Class D topology delivers extremely high efficiency

•• High level input with Autosense allows the amplifier to turn on and off without the need for

•• High quality cast connectors allow for heavy gauge cable to be connected.

•• Onboard active high pass, low pass and bypass crossover.

•• High level input with Autosense allows the amplifier to turn on and off without the need for

•• High gloss piano black heatsink finishing.

a separate remote turn on wire. •• Extruded aluminium heatsink provides superior thermal performance.

Model

a separate remote turn on wire.

PULSES2-V4

PULSES4-V4

SLICKS4-V2

SLICKB1-V2

SLICKCH5-V2

BLACKAIRS4-V1

BLACKAIRCH5-V1

BLACKAIRB2-V1

RMS @ 4Ω Stereo

2 channel 2” x 9” x 7.6” (50mm x 230mm x 194mm) 2 x 60 watts

4 channel 2” x 14.2” x 7.6” (50mm x 360mm x 194mm) 4 x 60 watts

Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo

4 channel 2” x 13” x 7.6” (50mm x 330mm x 194mm) 4 x 75 watts

Mono amp 2” x 9.1” x 7.6” (50mm x 230mm x 194mm) N/A

5 channel 2” x 16.5” x 7.6” (50mm x 420mm x 194mm) 4 x 60 watts

Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo

4 channel 2.1” x 13” x 6.5” (54mm x 329mm x 165mm) 4 x 100 watts

5 channel 2.1” x 20.4” x 6.5” (54mm x 520mm x 165mm) 4 x 90 watts

Mono amp 2.1” x 19.6” x 6.5” (54mm x 497mm x 165mm) N/A

RMS @ 2Ω Stereo

2 x 75 watts

4 x 75 watts

RMS @ 2Ω Stereo

4 x 100 watts

N/A

4 x 80 watts

RMS @ 2Ω Stereo

4 x 150 watts

N/A

RMS @ 1Ω Stereo

N/A

RMS @ 4Ω Mono

2 x 200 watts

1 x 200 watts

1 x 220 watts

RMS @ 4Ω Mono

2 x 300 watts

1 x 300 watts

1 x 500 watts

RMS @ 4Ω Mono

1 x 150 watts

2 x 150 watts

RMS @ 2Ω Mono

N/A

1 x 350 watts

1 x 380 watts

RMS @ 2Ω Mono

N/A

1 x 515 watts

1 x 1000 watts

Maximum Power

300 watts

600 watts

RMS @ 1Ω Mono

N/A

1 x 500 watts

N/A

RMS @ 1Ω Mono

N/A

1 x 1500 watts

Frequency Response

20Hz - 20kHz

Maximum Power

800 watts

1000 watts

1400 watts

Maximum Power

1200 watts

1750 watts

3000 watts

Crossover Type

LP / HP / Flat

Frequency Response

20Hz - 20kHz

10Hz - 500Hz

10Hz - 20kHz

Frequency Response

20Hz - 20kHz

10Hz - 20kHz

10Hz - 500Hz

Crossover Range

50Hz - 4kHz

LP / HP / BP / Flat

LP / Subsonic

LP / HP / Subsonic / Flat

Crossover Type

LP / HP / Flat

LP / HP / Subsonic

LP / Subsonic

Class AB

20Hz - 4kHz

10Hz - 150Hz

30Hz - 4kHz

Crossover Range

0Hz - 750Hz

0Hz - 200Hz

0Hz - 220Hz

Class AB

Class D

Hybrid

Class D

Hybrid

Class D

Configuration Dimensions (H x W x D)

Topology

Model

Crossover Type Crossover Range Topology

Model

Topology

SPL Competition Monoblock Amplifier

Full Range Ultra Class D Monoblock Power Amplifiers

Competition Winning SPL Amplifier

SQ Competition Amplifiers

Competition Winning SQ Amplifier

Competition Winning SPL Amplifier

•• Ultra Class D topology delivers the highest possible efficiency.

•• Ultra class D delivers efficiency of up to 92%

•• Class AB topology delivers natural and dynamic sound quality.

•• 3 x 0 AWG inputs allow for maximum current transfer from the power source to the amplifier.

•• Wide frequency response allows use with subwoofers and full range speaker systems.

•• Top mount controls make setup after installation much more convenient than traditional

•• Amplifier strapping circuit allows 2 identical amplifiers to deliver their combined power via

•• Unique combination FET technology delivers improved heat dissipation.

a single channel.

designs.

•• Dual internal cooling fans improve runtime under extreme output conditions. •• Massive power output from a footprint, 50% smaller than regular class D amplifiers.

•• Fully configurable HPF / LPF / BPF crossovers with frequency multiplier allows fully active drive of component speaker systems.

•• Full EMI and CE approval. Model

BLACKDEATHBASS2-V1

Configuration Dimensions (H x W x D) RMS @ 4Ω Mono

Competition Monoblock 3” x 37.4” x 11.8” (76mm x 950mm x 299mm) 1 x 2650 watts

RMS @ 2Ω Mono

1 x 5200 watts

RMS @ 1Ω Mono

1 x 9000 watts

RMS @ 1Ω Mono

1 x 14,5000 watts

RMS @ 0.5Ω Mono

N/A

Maximum Power

29,000 watts

Frequency Response

10Hz - 350Hz

Crossover Type

LP / Subsonic

Crossover Range

10Hz - 250Hz

Topology

Class D

Model Configuration Dimensions (H x W x D) RMS @ 4Ω RMS @ 2Ω RMS @ 1Ω Maximum Power Frequency Response Crossover Type Crossover Range Input Sensitivity S N/R Topology

BLACKDEATHM 4K-V6 Competition Monoblock 2.7” x 10.2” x 8.9” (68mm x 260mm x 225mm) 730 watts 1290 watts 2000 watts 4000 watts 5Hz - 20kHz LP / HP 10Hz - 15kHz 200mv - 8V 90dB Ultra Class D

BLACKDEATHM 8K-V6 Competition Monoblock 2.7” x 12.6” x 8.9” (68mm x 320mm x 225mm) 1650 watts 2800 watts 4000 watts 8000 watts 5Hz - 20kHz LP / HP 10Hz - 15kHz 200mv - 8V 90dB Ultra Class D

BLACKDEATHM 14K-V6 Competition Monoblock 2.7” x 16.1” x 8.9” (68mm x 410mm x 225mm) 3000 watts 4900 watts 7000 watts 14,000 watts 5Hz - 20kHz LP / HP 10Hz - 15kHz 200mv - 8V 90dB Ultra Class D

BLACKDEATHM 21K-V6 Competition Monoblock 2.7” x 21.3” x 8.9” (68mm x 540mm x 225mm) 3470 watts 7200 watts 10,500 watts 21,000 watts 5Hz - 20kHz LP / HP 10Hz - 15kHz 200mv - 8V 90dB Ultra Class D

CVENS4-V4

CVENCH6-V4

CVENS2-V4

Configuration Dimensions (H x W x D) RMS @ 4Ω Stereo

Model

4 channel 2.4” x 18.5” x 11.4” (60mm x 470mm x 290mm) 2 x 70 + 2 x 130 watts

6 channel 2.4” x 25.5” x 11.4” (60mm x 647mm x 290mm) 4 x 70 + 2 x 130 watts

2 channel 2.4” x 25.5” x 11.4” (60mm x 647mm x 290mm) 2 x 350 watts

RMS @ 2Ω Stereo

2 x 100 + 2 x 180 watts

4 x 100 + 2 x 180 watts

2 x 700 watts

RMS @ 1Ω Stereo

N/A

2 x 1000 watts

RMS @ 4Ω Mono

2 x 70 + 1 x 360 watts

4 x 70 + 1 x 360 watts

1 x 1400 watts

RMS @ 2Ω Mono

N/A

1 x 2000 watts

Maximum Power

1120 watts

1520 watts

4000 watts

10Hz - 20kHz

LP / HP / BP / Flat

15Hz - 6kHz

15Hz - 4kHz

Class AB

Frequency Response Crossover Type Crossover Range Topology

Vibe Oneblok • •

The Vibe Oneblok is a revolutionary patented solution to all Car audio ground and power connectivity! The patented technology allows the modular connectivity of the Oneblok in any number of formations, this includes ANL and Mini ANL fusing, Fused distribution, ground distribution, combined distribution and more!

• •

The unique coupler that comes with the Oneblok allows the linking of any number of Onebloks creating endless possibilities of connectivity. Its super compact design and modularity makes this one key product for any car audio enthusiast and the add on ability give the option to always upgrade and keep your Vibe Oneblok and the heart of your system.

ONEBLOK - ENDLESS SOLUTIONS

Sound Deadening Material

Sound Absorbing Material

•• Formed top design increased rigidity and reduces

•• Self adhesive backing allows the material to be easily

resonance.

installed.

•• 0.1mm Military grade aluminium top layer adds

•• Designed to absorb unwanted high frequencies.

rigidity to the material.

•• Convoluted construction absorbs 30-40% more

•• Butyl construction will not break down in high

sound than flat panel material.

temperature conditions like inferior bitumen based products.

Model Thickness Construction Size Weight Pack qty

ANTIVIBESDBP-V6

AVSD2-V1

AVSDR-V1

0.1” (2.5mm)

1.8mm

Butyl Butyl Butyl 10.6” x 14.6” (270mm x 370mm) 10” x 10” (250mm x 250mm) 18” x 32” (450mm x 810mm) 3.75kg / sq.m 3.75kg / sq.m 3.75kg / sq.m 35 sheets

2pcs

Roll

Model Thickness Construction Size Pack qty

ANTIVIBESD-V6BP 1.4” (35mm) Polyurethane 19.7” (500mm) x 23.6” (600mm) 4 sheets

Vibe Advanced Accessories The advanced RCA cables feature a unique 45 degree angled

A c c e s s o r i e s

plug for easy installation to go with its triple shielding for exceptional noise protection and silicone coating for unparalleled flexibility. The amp wiring kits will fully optimise any car audio install for great performance, power and sound quality with focus on build quality and safety in mind, 4 and 8awg true gauge power cables, mini ANL fuse holders, High quality speaker cable and the advanced level RCA.

Vibe Budget Accessories The budget range of accessories is a cost affective way too install your Vibe car audio products with a great quality and great priced The Critical Link range of accessories from Vibe has been designed and developed to achieve the critical link between your source, amplifier and

product. The Budget range includes a twisted core Vibe RCA cables, ultra flexible 18awg speaker cable and a great value 10awg amp wiring kit.

speakers. In order to run Vibes high quality car audio equipment using anything other than the Critical link range of accessories will seriously compromise your products performance and not allow it to deliver its maximum potential. Your audio equipment will only ever be as good as its weakest link, donâ&#x20AC;&#x2122;t let this be tour install accessories, all Vibe Critical Link accessories have been developed to maximise the performance of the Vibe car audio products its being used with as well as ensuring safe and secure connectivity at all times Ease of installation is at the forefront of the devel-

Vibe Power and Earth connectivity The fusing and earthing of the system is essential to run any Vibe car audio products safely. The products within this range include, ANL and Mini ANL fuse holders and fuses, fused distribution blocks, ground distribution blocks, circuit breakers and all connectivity such as high quality nickel compressions terminals, ring terminals and cable reducers.

opment of the new line of Critical Link products and some great innovations and design ideas will be seen across the range! Vibe Speaker Connectivity Vibe speaker cable is a high quality 12 and 16awg speaker cable in an ultra flexible silicone coating. The speaker connectivity line also included all connectors required when fitting speakers or amplifiers, these are bullet,butt,ring and speaker connectors designed for easy installation.

Vibe Accessories The Vibe line of accessories offer everything needed to install and fit any Vibe car audio product. High quality bass controllers, Line level converters, ground loop isolators make up the electrical components. To ease the fitment of Vibe car audio products the Vibe Accessory line features a set of great quality trim removal tools and a sound deadening roller.

ADV A BUD G

D RANGE CE N

NGE RA

Product Number

CL4AWKT-V7

CL8AWKT-V7

CLRCA5MA-V7

CLRCA1MA-V7

LRCA2M1FA-V7

CLRCA2F1MA-V7

Product Name

4awg True Gauge Wiring Kit

8awg True Gauge Wiring Kit

5m RCA Cable

1m RCA Cable

2M To 1F RCA Splitter

2F To 1M RCA Splitter

• 5M 4AWG power cable • 1M 4AWG earth cable • 5M remote cable • 5m advanced RCA • Mini ANL fuse holder • 10M 16AWG speaker cable

• 5M 8AWG power cable • 1M 8AWG earth cable • 5M remote cable • 5m advanced RCA • Mini ANL fuse holder • 10M 16AWG speaker cable

• Triple shielded RCA • 5M RCA with unique 40°

• Triple shielded RCA • 1M RCA with unique 40°

• Triple shielded RCA splitter advanced series

Product Number

CL10AWK-V7

CLSPK18-V7

CLRCA5MB-V7

CLRCA1MB-V7

LRCA2M1FB-V7

CLRCA2M1FB-V7

Product Name

10awg Basic wiring Kit

18 AWG Speaker Cable

5m RCA Cable

1m RCA Cable

2M To 1F RCA Splitter

• 5M 10AWG power cable • 1M 10AWG earth cable • 5M remote cable • Inline fuse

• 6M 18AWG black and red speaker cable

• Twisted pair single shielded 5M RCA cable

• Twisted pair single shielded 1M RCA cable

• Twisted pair single shielded RCA splitter

Product Number

CLMANLF-V7

CLANLFH-V7

CLFD-V7

CLGD-V7

CLCB100-V7

CLCB150-V7

CLANL150-V7

CLANL200-V7

CLMANL40-V7

CLMANL60-V7

Product Name

Mini ANL Fuse Holder

ANL Fuse Holder

2-Way Fused Distribution

2-Way Ground Distribution

100 Amp Circuit Breaker

150 Amp Circuit Breaker

ANL Fuse 150amp (1pc)

ANL Fuse 200amp (1pc)

Mini ANL Fuse 40amp (2pc)

Mini ANL Fuse 60amp (2pc)

• ABS fuse holder to house mini ANL fuse

• ABS fuse holder to house ANL fuse

• 1 x 0AWG input • 2 x 4AWG output distribution block

• Circuit breaker for a 100 amp rated system

• Circuit breaker for a 150 amp rated system

• 1 x 150 amp ANL fuse

• 1 x 200 amp ANL fuse

• 1 x 40 amp ANL fuse

• 1 x 60 amp ANL fuse

Product Number

CLMANL80-V7

CLMANL100-V7

CLATC-V7

CLCT0-V7

CLCT4-V7

CLRT4-V7

CLRT8-V7

CL04R-V7

CL48R-V7

Product Name

Mini ANL Fuse 80amp (2pc)

Mini ANL Fuse 100amp (2pc)

10/20/30/40 Amp ATC Fuse

0 AWG Compression Terminal

4 AWG Compression Terminal

4 AWG Ring Terminal

8 AWG Ring Terminal

0 - 4 AWG Reducer

4 - 8 AWG Reducer

• 1 x 80 amp ANL fuse

• 1 x 100 amp ANL fuse

• 1 x 10/20/30/40 amp ATC fuse

• Compression ring terminal for 0AWG cable

• Compression ring terminal for 4AWG cable

• Ring terminal for 4AWG cable

• Ring terminal for 8AWG cable

• Cable reducer from 0AWG to 4AWG

• Cable reducer from 4AWG to 8AWG

Product Number

CLSPK12-V7

CLSPK16-V7

CLCTB-V7

CLCTR-V7

CLCTS-V7

CLCTBU-V7

Product Name

12 AWG Speaker Cable

16 AWG Speaker Cable

Bullet Connector (10pcs)

Ring Connector (10pcs)

Spade Connector (10pcs)

Butt Connector (10pcs)

• Hi-flex 12AWG 10 meter speaker cable

• Hi-flex 16AWG 10 meter speaker cable

• 10 x bullet crimp connectors

• 10 x ring connectors

• 10 x spade connectors

• 10 x butt connectors

Product Number

CLTRS1.5M-V7

CLTRSRCA1.5M-V7

CLGLI-V7

CLLOC-V7

CLBC-V7

CLDR-V7

CLTRT-V7

Product Name

1.5m, 3.5mm to 3.5mm Jack

1.5m, 3.5mm to RCA

Ground Loop Isolator

Line Output Converter

Bass Controller

Dampening Roller

Trim Removal Tools

• Nickel plated 3.5mm to 3.5mm jack

• Nickel plated 3.5mm to RCA

• Grounding module to remove unwanted system noise

• Speaker level to RCA converter

• Line level controller for bass RCA

• Applicator for Vibe Anti Vibe sound deadening

• Professional car trim removal tools

www.vibeaudio.co.uk www.youtube.com/vibeaudio www.facebook.com/vibeaudio

PASSIONATE ABOUT SOUND

LOVE DESIGN

PROUD TO BE DIFFERENT

www.twitter.com/vibecaraudio www.instagram.com/vibeaudio For enquiries and support please contact info@vibeaudio.co.uk