Legacy System Implant

Legacy ™ System Catalog

Legacy1

Legacy2

Legacy2

Legacy3

Table of Contents Page # Implant Design, Surface & Dimensions

1-5

6-11 Labeling & Fixture-Mount Packaging

12-13

14 Procedures for Titanium FMT / Temporary Abutment

Screw-Receiving, Ball & GPS Abutments

24

25-27

Surgical Tray

Gold, Engaging & Non-Engaging Abutments

22

23 Overdenture & Screw-Receiving Abutment Ancillary Products

Straight Abutment & Ancillary Components

20

21

Selection Chart for Overdenture & Screw-Retained Restorations

Selection Chart for Legacy Systems

18

19 Straight & Angled Contoured, Titanium & Zirconia Abutments

Procedures for Contoured Abutments

15

16-17

Cover Screws, Healing Collars, Transfers & Analogs

Legacy1, Legacy2 & Legacy3 Implants

28-29

Instruments, Surgical Drills & Surgical Sequence

Implant Design & Surface

Mini-threads with Double-lead Threads for Faster Insertion The bodies of the Legacy1, Legacy2 and Legacy3 implants are tapered to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Legacy system implants. Mini-threads start 1mm below the crest of the bone and extend for 2.0-2.5mm before transitioning into double-lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend up the implant from the apex for self-tapping insertion.

Standard “V” Thread

Quadruple Lead MiniThreads

Spiral Thread

0.3mm

Buttress Thread

0.4mm

All three Legacy implants have mini-threads for reduced stress near the crest of bone and double-lead threads on the body for 2X faster insertion The 1.5o taper to the OD of the Legacy1, 2 & 3 implants facilitate soft bone expansion for increased stability.

0.8mm

0.6mm

Double Lead Threads

0.8mm

1.5 Deg. OD Taper

1.5 Deg. OD Taper Legacy1 threads provide the same 1.5o taper to the inside (ID) and outside thread (OD) diameters

0.4mm

3.0 Deg. ID Taper

5.0 Deg. ID Taper Legacy2 Implant

1.5 Deg. OD Taper

Legacy2 & 3 provide more thread engagement by tapering the inside thread diameter (ID) at 3o & 5o while the outside thread diameter (OD) tapers at 1.5o

SBM™ and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when these studies were conducted.

SEM's of Our Surfaces Mini-threads textured by blasting with SBM: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer SBM Surface 20X

SBM Surface 50X

HA Surface 20X

HA Surface 50X

Animal Studies Bone Response to SBM Surface

1

Legacy1 Implant Dimensions

0.25mmL Bevel

3.5mmD Platform Taper starts at 1mm

2.0mmL Zone Mini-threads

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead “V” Threads

3.7mmD Body HA

SBM Texture 3.5mmD Platform with a 2.5mmD Internal Hex

3.7mmD Legacy1 3.1mmD Apex Diameter

0.25mmL Bevel Taper starts at 1mm

2.0mmL Zone Mini-threads

4.5mmD Platform

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead “V” Threads

HA

SBM Texture

4.5mmD Platform with a 2.5mmD Internal Hex

4.7mmD Legacy1 4.1mmD Apex Diameter

Taper starts at 1mm

2.0mmL Zone Mini-threads

4.7mmD Body

5.7mmD Platform

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead “V” Threads

SBM Texture

HA

5.7mmD Body

5.7mmD Legacy1 5.1mmD Apex Diameter

2

5.7mmD Platform with a 3.0mmD Internal Hex

Legacy2 Implant Dimensions 3.5mmD Platform

1.5mm Hex Depth 0.25mmL Bevel

0.25mmL Bevel

2.0mmL Zone Mini-threads

2.0mmL Zone Mini-threads

1-72UNF Internal Thread

3.7mmD Body Taper starts at 4.5mm

Double-lead Spiral Threads

Length + 0.25mm

3.5mmD Platform with a 2.5mmD Internal Hex

1-72UNF Internal Thread Taper starts at 4.5mm

Double-lead Spiral Threads

Length + 0.25mm

3.5mmD Platform HA

HA

SBM Texture

3.7mmD Legacy2 3.1mmD Apex Diameter

SBM Texture

4.2mmD Legacy2 3.6mmD Apex Diameter

1.5mm Hex Depth

4.2mmD Body

0.25mmL Bevel

4.5mmD Platform 2.0mmL Zone Mini-threads 1.5mm Hex Depth

1-72UNF Internal Thread

Taper starts at 4.5mm

Double-lead Spiral Threads

Length + 0.25mm

HA

SBM Texture

4.7mmD Body 4.5mmD Platform with a 2.5mmD Internal Hex

4.7mmD Legacy2 4.1mmD Apex Diameter 1.5mm Hex Depth

5.7mmD Body 0.25mmL Bevel

2.0mmL Zone Mini-threads

2.0mmL Zone Mini-threads 1-72UNF Internal Thread

1-72UNF Internal Thread

Taper starts at 4.5mm

Double-lead Spiral Threads

Length + 0.25mm

5.7mmD Platform with a 3.0mmD Internal Hex

SBM Texture

HA

Taper starts at 4.3mm

Double-lead Spiral Threads

Length + 0.25mm SBM Texture

HA

5.7mmD Legacy2 5.1mmD Apex Diameter

7.0mmD Legacy2 5.1mmD Apex Diameter 1.5mm Hex Depth

7.0mmD Body

3

Legacy3 Implant Dimensions

0.25mmL Bevel

3.0mmD Platform Taper starts at 1.25mm

2.0mmL Zone Mini-threads

0.6mm Hex Depth 1.2mm Hex Depth

1.6 UNM Internal Thread Length + 0.25mm

Double-lead Buttress Threads

3.2mmD Body HA

SBM Texture 3.0mmD Platform with a Double Internal Hex 2.25mmD (upper) and 2.0mmD (lower)

3.2mmD Legacy3 2.6mmD Apex Diameter

0.25mmL Bevel

3.5mmD Platform Taper starts at 1.25mm

2.0mmL Zone Mini-threads

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

HA

SBM Texture

3.7mmD Body 3.7mmD Legacy3 3.1mmD Apex Diameter

3.5mmD Platform with a 2.5mmD Internal Hex

0.25mmL Bevel Taper starts at 1.25mm

2.0mmL Zone Mini-threads

3.5mmD Platform

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

SBM Texture

HA

4.2mmD Body

4.2mmD Legacy3 3.6mmD Apex Diameter

4

3.5mmD Platform with a 2.5mmD Internal Hex

Legacy3 Implant Dimensions

0.25mmL Bevel

4.5mmD Platform Taper starts at 1.25mm

2.0mmL Zone Mini-threads

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

4.7mmD Body HA

SBM Texture 4.5mmD Platform with a 2.5mmD Internal Hex

4.7mmD Legacy3 4.1mmD Apex Diameter

0.25mmL Bevel

4.5mmD Platform Taper starts at 1.25mm

2.0mmL Zone Mini-threads

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

HA

SBM Texture

5.2mmD Body

5.2mmD Legacy3 4.6mmD Apex Diameter

4.5mmD Platform with a 2.5mmD Internal Hex

Taper starts at 1.25mm

2.0mmL Zone Mini-threads

5.7mmD Platform

1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

SBM Texture

HA

5.7mmD Body

5.7mmD Legacy3 5.1mmD Apex Diameter

5.7mmD Platform with a 3.0mmD Internal Hex

5

Legacy1 Legacy1 Implant System Features & Benefits

Legacy1 Packaging

• Internal connection with 1.5mm long hex & internal bevel • Tapered body allows insertion using Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill) • Surface options: SBM (Soluble Blast Media)textured or HA-coated • Double-lead “V” threads for 2X faster insertion & quadruple-lead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar for one stage surgery • Two self-tapping grooves, extending halfway up implant

3.5mmD Platform

4.5mmD Platform

Carrier

5.7mmD Platform Extender Cover Screw

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Placing Implant with Plastic Carrier

Remove plastic fixture-mount carrier

Attach cover screw and extender to implant

6

Seat implant and align implant hex with tool

Suture soft tissue around extender

Legacy1: Two-Piece Implant for Two-Stage Surgery Legacy1

SBM and HA Surface Implants

Includes Cover Screw & Extender

3.7mmD SBM Code 803708 803710 803711 803713 803716

HA Code 813708 813710 813711 813713 813716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA Code 814708 814710 814711 814713 814716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

HA Code 815708 815710 815711 815713 815716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

803708 813708

803710 813710

803711 813711

803713 813713

803716 813716

804708 814708

804710 814710

804711 814711

804713 814713

804716 814716

805708 815708

805710 815710

805711 815711

805713 815713

805716 815716

4.7mmD SBM Code 804708 804710 804711 804713 804716

5.7mmD SBM Code 805708 805710 805711 805713 805716

7

Legacy2 Legacy2 Implant System Features & Benefits

Legacy2 Packaging

• Internal connection with 1.5mm long hex & internal lead-in bevel • Body is straight for top 1/3rd with bottom 2/3rds tapered for bone expansion. Surgically compatible with Tapered Screw-Vent® drills (except the 5.7mmD Implant uses 5.4/4.8mmD Step Drill) • Surface options: SBM (Soluble Blast Media) textured or HA-coated • Double-lead spiral threads for improved insertion & quadruplelead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar for one stage surgery • Color-coded carrier usable as a closed-tray transfer & temporary abutment • Three aggressive self-tapping grooves extending 2/3rds length up the implant

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

5.7mmD Platform

Carrier/Transfer

5.7mmD Platform Cover Screw

3.7mmD Implant

8

4.2mmD Implant

4.7mmD Implant

5.7mmD Implant

7.0mmD Implant

Extender

Placing Carrier/Transfers & Making Impressions

Color-coded titanium fixture-mount carrier

Align flat to labial for indexing of hex

Fixture-mount is screw-retained

Use fixture-mount as closed tray transfer

Legacy2: Two-Piece Implant for Two-Stage Surgery Legacy2

SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer 3.7mmD SBM Code 823708 823710 823711 823713 823716

HA Code 833708 833710 833711 833713 833716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA Code 834208 834210 834211 834213 834216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA Code 834708 834710 834711 834713 834716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

HA Code 835708 835710 835711 835713 835716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

HA Code 837008 837010 837011 837013

Diameter 7.0mmD 7.0mmD 7.0mmD 7.0mmD

Length 8mmL 10mmL 11.5mmL 13mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD

823708 833708

823710 833710

823711 833711

823713 833713

823716 833716

824208 834208

824210 834210

824211 834211

824213 834213

824216 834216

824708 834708

824710 834710

824711 834711

824713 834713

824716 834716

825708 835708

825710 835710

825711 835711

825713 835713

825716 835716

4.2mmD SBM Code 824208 824210 824211 824213 824216

4.7mmD SBM Code 824708 824710 824711 824713 824716

5.7mmD SBM Code 825708 825710 825711 825713 825716

7.0mmD SBM Code 827008 827010 827011 827013

827008 837008

827010 837010

827011 837011

827013 837013

9

Legacy3 Legacy3 Implant System Features & Benefits • Internal connection with 1.5mm long hex & internal lead-in bevel • Tapered body allows insertion using Tapered Screw-Vent® drills for 3.7mmD, 4.2mmD & 4.7mmD implants only • Surface options: SBM (Soluble Blast Media) textured or HA-coated • Double-lead buttress threads for improved insertion & initial stability, quadruple-lead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar or for one or two-stage surgery • Color-coded carrier usable as a closed-tray transfer and/or final full-contour abutment • Two self-tapping grooves, extending halfway up implant

Legacy3 Packaging Carrier/Transfer

Cover Screw

Extender

3.0mmD Platform

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

4.5mmD Platform

5.7mmD Platform

3.2mmD Implant

3.7mmD Implant

4.2mmD Implant

4.7mmD Implant

5.2mmD Implant

5.7mmD Implant

10

Legacy3: Two-Piece Implant for Two-Stage Surgery Legacy3 Cover Screw, Extender & Carrier/Transfer SBM and HA Surface Implants Includes * Extender NOT supplied with 6mmL implant

3.2mmD SBM Code 853208 853210 853211 853213 853216

HA Code 863208 863210 863211 863213 863216

Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

HA Code 863706 863708 863710 863711 863713 863716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA Code 864206 864208 864210 864211 864213 864216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA Code 864706 864708 864710 864711 864713 864716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

HA Code 865206 865208 865210 865211 865213 865216

Diameter 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

HA Code 865706 865708 865710 865711 865713 865716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

853208 863208

853210 863210

853211 863211

853213 863213

853216 863216

*853706 *863706

853708 863708

853710 863710

853711 863711

853713 863713

853716 863716

*854206 *864206

854208 864208

854210 864210

854211 864211

854213 864213

854216 864216

*854706 *864706

854708 864708

854710 864710

854711 864711

854713 864713

854716 864716

*855206 *865206

855208 865208

855210 865210

855211 865211

855213 865213

855216 865216

*855706 *865706

855708 865708

855710 865710

855711 865711

855713 865713

855716 865716

3.7mmD SBM Code 853706 853708 853710 853711 853713 853716

4.2mmD SBM Code 854206 854208 854210 854211 854213 854216

4.7mmD SBM Code 854706 854708 854710 854711 854713 854716

5.2mmD SBM Code 855206 855208 855210 855211 855213 855216

5.7mmD SBM Code 855706 855708 855710 855711 855713 855716

11

Legacy Labeling: Definitions & Descriptions

1 2

803713

Legacy 31 Implant SBM™ 3.7mm Diam 13mm 3.5mm Diam

™

4

™

13

xxxxxxxxxxxx Legacy 1 # 803713 xxxxxxxxxxxx ™ Legacy 1 # 803713

3 80 = Legacy1 SBM 37 = 3.7mmD body diameter 13 = 13mmL body length

Body 3.7 mm Platform 3.5 mm

Body 3.7 mm Platform 3.5 mm

Legacy Implant Vial and Cap Label

5 6

12

7

11

8

10

9

xxxxxxxxxxxx Platform 3.5 mm Plastic Temporary Abut. # 8035-47 xxxxxxxxxxxx Platform 3.5 mm Plastic Temporary Abut. # 8035-47

Legacy Prosthetic Vial and Cap Label 1 2 3 80 = Legacy prosthetics 35 = 3.5mmD platform diameter -47= prosthetic specific code

4

8035-47 Plastic Engaging Temporary Abutment Includes: Fixation Screw [1000-01]

Platform: 3.5mm Diam

13

7 13

8 14

9

10

1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Use before expiration date (XXXX-XX) 6) Gamma sterilization symbol 7) Single-use only symbol 8) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 9) Tamper proof symbol 10) Refer to Instructions For Use (IFU) 11) Lot number (XXXXXXXXXX) 12) Implant body diameter color reference on surgical tray 13) Implant prosthetic platform diameter (written and color-coded) 14) Non-sterile symbol

12

11

Legacy Fixture-Mount P ackaging

The implant is mounted on a color-coded Carrier/Transfer.

A cover screw and extender are included in each vial.

Prepare surgical site with double cutting step drill

All the implants come in a sterile vial

Each vial label is color-coded with two tear-off labels

Each cap label is color coded by platform diameter of implant

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with insertion tool & drill or ratchet

Insert implant into osteotomy

Index fixture-mount flat to labial

Remove fixture-mount

Align the flat of the fixture mount to the labial

Remove the holder containing the cover screw & extender

Unscrew the cover screw & extender

Attach the cover screw to implant

Suture soft tissue over cover screw

Attach the cover screw & extender to implant

Suture soft tissue around cover screw & extender

13

Clinical & Laboratory Procedures for Contoured Abutments Orienting the 15º Angled Abutment The flat side of the transfer [Fig. 1] or Hexagon Tool [Fig. 2] and the angle of the 15° abutment [Fig. 3] are manufactured to align with the flat of the implant’s internal hexagon.

Fig. 1

Fig. 2

Fixture Mount/ Transfer

2.5mmD Hex Tool

Fig. 3 The two-piece, 15º Angled Abutment consists of an angled body and a fixation screw

To establish the optimum angle of the abutment, index the flat surface of the Fixture Mount/Transfer either toward or away from the desired direction of abutment angle at the time of implant placement.

Option 1 : Attaching an Angled Abutment and chairside procedures for preparation Remove the Healing Collar with a 1.25mmD Hex Tool

Attach the abutment with the 1.25mmD Hex Tool

Mark the required modifications to achieve appropriate clearance

Detach the abutment with the 1.25mmD Hex Tool

Attach the abutment to the corresponding Implant Analog & reduce the abutment to achieve appropriate clearance

Option 2 : Stage-One transfer followed by laboratory procedures for abutment preparation and provisionalization

During implant placement, index the flat of the Fixture-Mount

With Fixture-Mount in place, make a conventional transfer impression

Attach the Cover Screw & submerge implant

The Fixture-Mount is retained within the impression material when it is removed

Pour the working cast in dental stone with soft tissue replication material

Attach the Angled Abutment to the Implant Analog in the working cast with a 1.25mmD Hex Tool

Modify angle of abutment & refine margins as required

Fabricate the temporary crown

At Stage-Two Surgery, attach the prepared abutment, tighten to 30 Ncm with a Torque Wrench

Occlude screw access hole & confirm contour of restoration

Remove the impression from the working cast exposing top of Implant Analog

Cement the provisional restoration

Common procedures for abutment placement, margin finessing, impressing and placement of restoration Tighten to 30 Ncm with a Torque Wrench

14

Finesse the margins with a high-speed bur & copious irrigation prior to final impressing

Make an impression following standard clinical procedures

Attach provisional restoration & cement onto the prepared abutment

Following standard laboratory procedures, fabricate the final restoration & cement onto the prepared abutment

Clinical Procedures for Titanium Temporary Abutment/Fixture-Mount

1. Unthread the healing collars from the implant using 1.25mmD Hex Tool. The top of the implants are exposed.

2. Use the prepared implant fixture mount as a temporary abutment (reshaping of hex at apex is essential) or select the Titanium Temporary Abutment matching the implant prosthetic platform.

3. Place the fixation screw through the abutment and tighten in place using the appropriate 1.25mmD Hex Tool. The torque value of the fixation screw is determined by clinician. Standard torque value for fixation screws is 30Ncm.

4. Confirm there is less than 40 degrees of relative divergence between abutments to be splinted together.

5. Mark position of Titanium Temporary Abutments on under surface of denture with indelible marker.

6. Use acrylic trimmer to drill holes through denture corresponding to marked positions.

7. Seat denture over Titanium Temporary Abutment to confirm passive placement. Check occlusion with opposing arch. Occlude screw access hole with cotton pellet.

8. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Abutments. Allow to set prior to removal from mouth.

9. Remove prosthesis from the mouth, flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed abutments.

10. Optional step: Attach implant analogs to base of denture. Pour a soft tissue working cast to prevent engagement with undercuts. Articulate with opposing arch.

11. Remove denture & trim the prosthesis to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only.

12. Attach prosthesis to implants & tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.

15

Legacy Selection Chart

3.0mmD Platform

3.5mmD Platform

Fixture-Mount

Cover Screws, Healing Collars, Implant Transfers & Analogs 8530-01

8530-13

8530-15

8530-05

8530-08

8530-06

8035-01

8035-13

8035-15

3037-26

Straight Abutments, Comfort Caps, Transfers & Analogs

8537 8530-21

8530-22

8530-23

8035-21

8035-22

8035-23

8530-51-08C 8530-52-08C

8035-31 8035-32

8035-31C 8035-32C

8035-51 8035-52

8530-49

8035-40

8035-41

8035-44

8537-02

Straight & Angled Contoured & HLA Abutments 8530-31 8530-32

8530-31C 8530-32C

8530-51 8530-52

8530-40

8530-41

8530-51-15C 8530-52-15C

Engaging & Non-Engaging Abutments 8530-46

8530-47

8035-72

Ball, GPS™ & Screw-Receiving Overdenture Abutments

8530-61

8530-91

16

8530-62

8530-92

8530-93

8530-64

8035-64-15

8035-64-30

8530-94

8035-94-15 8035-94-30

8035-91

4.5mmD Platform

5.7mmD Platform

Fixture-Mount

8035-05

8035-08

8035-06

Fixture-Mount

8045-01

8045-13

8045-15

3047-26

8045-05

8045-08

8045-06

8057-13

8057-15

8057-05

8045-22

3065 8057-21

8057-22

8057-23

3057-02

8035-47

HLA3-4 HLA3-5

8035-49

8045-31 8045-32

8045-31C 8045-32C

8045-40

8035-74

8035-62

8045-41

8045-51 8045-52

8045-46

8045-72

8035-64

8035-92 8035-93 8035-94 8035-95

8045-64-15

8045-64-30

3065-02

8045-51-15C 8045-52-15C

8045-44

8045-51-08C 8045-52-08C

8045-47

HLA4-5 HLA4-6

8045-49

8057-31 8057-32

8057-40

8057-44

8045-74

8045-61

8057-06

3065-26

8045-23

3047-02

8035-51-15C 8035-51-08C 8035-52-15C 8035-52-08C

8057-08

3057 8045-21

8035-61

8057-01

3057-26

3047

8035-46

Fixture-Mount

8045-62

8057-51 8057-52

8057-46

8057-72

8045-64

8045-94-15 8045-94-30 8045-91 8045-92 8045-93 8045-94 8045-95

8057-61

8057-91

8057-92

HLA5-6 HLA5-7

8057-47

8057-49

8057-74

8057-62

8057-93

8057-64

8057-94

8057-95

17

Cover Screws, Healing Collars, Transfers & Analogs Surgical Cover Screws

Code 8530-01 8035-01 8045-01 8057-01

Requires 1.25mmD Hex Tool

Code [*for 6mmL Only] 8035-01S 8045-01S 8057-01S

Healing Collars

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

8530-01

8035-01 *8035-01S

8045-01 *8045-01S

8057-01 *8057-01S

8530-13

8035-13

8045-13

8057-13

8530-15

8035-15

8045-15

8057-15

Requires 1.25mmD Hex Tool

Code 8530-13 8530-15 8035-13 8035-15 8045-13 8045-15 8057-13 8057-15

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Closed-Tray Implant Transfers

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Code 8530-05 8035-05 8045-05 8057-05

Open-Tray Implant Transfers

Code 8530-08 8035-08 8045-08 8057-08

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Width 3.8mmD 3.8mmD 4.8mmD 4.8mmD 5.8mmD 5.8mmD 6.6mmD 6.6mmD

Length 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-41 1000-06 1000-06 1000-06

1000-41

8530-05

1000-06

8035-05

8045-05

8057-05

1000-26

8530-08

1000-10

8035-08

8045-08

8057-08

Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-26 1000-10 1000-10 1000-10

Implant Analogs

Code 8530-06 8035-06 8045-06 8057-06

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Fixation Screws

Code 1000-20 1000-41 1000-26 1000-01 1000-06 1000-10

18

8530-06

8045-06

8057-06

Open-Tray Transfer & Waxing Screw

Requires 1.25mmD Hex Tool

Description For use with 3.0mmD hexagon platform For use with 3.0mmD hexagon platform For use with 3.0mmD hexagon platform For use with 3.5, 4.5 & 5.7mmD hexagon platforms For use with 3.5, 4.5 & 5.7mmD hexagon platforms For use with 3.5, 4.5 & 5.7mmD hexagon platforms

8035-06

Closed-Tray Transfer & Temporary Abutment Abutments

1000-20

1000-41

1000-26

3.0mmD Hex Platform

1000-01

1000-06

1000-10

Straight Abutments, Snap-on Transfers & Lab Analogs Includes Transfer, Comfort Cap & Fixation Screw with 1.25mmD Hex

Straight Abutments

Code 8530-21 8530-22 8530-23 8035-21 8035-22 8035-23 8045-21 8045-22 8045-23 8057-21 8057-22 8057-23

Platform 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD 5.7mmD

Collar Heights 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm

Use Analog 8537 8537 8537 3047 3047 3047 3057 3057 3057 3065 3065 3065

8530-21

8035-21

8045-21

8057-21

8530-22

8035-22

8045-22

8057-22

8530-23

8035-23

8045-23

8057-23

Straight Abutment Transfers

Code 8537-02 3047-02 3057-02 3065-02

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

8537-02

3047-02

3057-02

3065-02

3037-26

3047-26

3057-26

3065-26

8537

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Straight Abutment Comfort Caps

Code 3037-26 3047-26 3057-26 3065-26

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Includes Castable Coping

Straight Abutment Analogs

Code 8537 3047 3057 3065

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Castable Coping

Code 3037-28 3047-28 3057-28 3065-28

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

19

Straight & Angled Contoured, Titanium & Zirconia Abutments Straight Titanium Contoured Abutments

Code 8530-31 8530-32 8035-31 8035-32 8045-31 8045-32 8057-31 8057-32

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm 1mm 2mm

Angled Titanium Contoured Abutments

Code 8530-51 8530-52 8035-51 8035-52 8045-51 8045-52 8057-51 8057-52

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Collar Heights .75mm 2mm .75mm 2mm .75mm 2mm .75mm 2mm

0°, 8° & 15° Zirconia Contoured Abutments

Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-20 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

8530-31

8035-31

8045-31

8057-31

8530-32

8035-32

8045-32

8057-32

8530-51

8035-51

8045-51

8057-51

8530-52

8035-52

8045-52

8057-52

Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-20 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01 Price includes Fixation Screw with 1.25mmD Hex

Code 8530-31C 8530-32C 8530-51-08C 8530-52-08C 8530-51-15C 8530-52-15C 8530-30CB

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1mm 1000-20 2mm 1000-20 1mm 1000-20 2mm 1000-20 1mm 1000-20 2mm 1000-20 .5mm 1000-20

Code 8035-31C 8035-32C 8035-51-08C 8035-52-08C 8035-51-15C 8035-52-15C 8035-30CB

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1000-01 1mm 1000-01 2mm 1000-01 1mm 1000-01 2mm 1000-01 1mm 1000-01 2mm 1000-01 .5mm

Code 8045-31C 8045-32C 8045-51-08C 8045-52-08C 8045-51-15C 8045-52-15C 8045-30CB

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1mm 1000-01 2mm 1000-01 1mm 1000-01 2mm 1000-01 1mm 1000-01 2mm 1000-01 .5mm 1000-01

8530-31C

8530-30CB

8530-32C

8530-52-08C 8530-52-15C

8035-31C

8035-51-08C 8035-51-15C

8035-30CB 8035-32C

8035-52-08C 8035-52-15C

8045-31C

8045-51-08C 8045-51-15C

8045-30CB

8045-32C

20

8530-51-08C 8530-51-15C

8045-52-08C 8045-52-15C

Engaging & Non-Engaging, Gold, Plastic & Titanium Abutments Straight Full-Contoured (HLA) Abutments

Code HLA3-4 HLA3-5 HLA4-5 HLA4-6 HLA5-6 HLA5-7

Platform 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Collar Heights 0mm 0mm 0mm 0mm 0mm 0mm

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm

Gold Non-Engaging Cast-to Abutments

Code 8530-41 8035-41 8045-41

Platform 3.0mmD 3.5mmD 4.5mmD

Collar Heights 1.0mm 1.0mm 1.0mm

Plastic Engaging Castable Abutments

Code 8035-44 8045-44 8057-44

Platform 3.5mmD 4.5mmD 5.7mmD

Collar Heights 0mm 0mm 0mm

Plastic Non-Engaging Castable Abutments

Code 8530-46 8035-46 8045-46 8057-46

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Collar Heights 0mm 0mm 0mm 0mm

Plastic Engaging Temporary Abutments

Code 8530-47 8035-47 8045-47 8057-47

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm

Titanium Non-Engaging Temporary Abutments

Code 8530-49 8035-49 8045-49 8057-49

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

HLA3-4

HLA4-5

HLA5-6

HLA3-5

HLA4-6

HLA5-7

Price includes Fixation Screw with 1.25mmD Hex

Gold Engaging Cast-to Abutments

Code 8530-40 8035-40 8045-40 8057-40

Price includes Fixation Screw with 1.25mmD Hex

Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm

Replacement Screw 1000-20 1000-01 1000-01 1000-01

8530-40

8035-40

8045-40

8057-40

8530-41

8035-41

8045-41

8035-44

8045-44

8057-44

8530-46

8035-46

8045-46

8057-46

8530-47

8035-47

8045-47

8057-47

8530-49

8035-49

8045-49

8057-49

Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-01 1000-01 Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-01 1000-01 1000-01 Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-01 1000-01 1000-01 Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-41 1000-06 1000-06 1000-06 Price includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-01 1000-01 1000-01

21

Selection Chart: Overdenture & Screw-Retained Restorations 3.0mmD Platform

4.5mmD Platform

3.5mmD Platform

5.7mmD Platform

Screw-Receiving Overdenture Abutments (*Includes Transfer & Comfort Cap)

Overdenture Abutments 8530-61 8530-62 8530-64

8035-61 8035-62 8035-64

8045-61 8045-62 8045-64

8035-64-15 8035-64-30

8057-61 8057-62 8057-64

8045-64-15 8045-64-30

Screw-Receiving Overdenture Abutment Transfer, Analog & Comfort Cap Open-Tray Transfer

OD Abutment Comfort Cap Transfer & Analogs *4000-13

*1000-68

1000-61

Closed-Tray Transfer

1000-62

1000-63

Overdenture Screw-Retained Copings Overdenture Abutment Components

1000-64

1000-65

Gold

1000-66

Titanium

1000-67

Plastic

Gold/Plastic

1000-69

Titanium

Ball Abutments (**Includes Transfer & Comfort Cap) Ball Abutments 8035-72 8035-74

8045-72 8045-74

8057-72 8057-74

Ball Attachments

Ball Abutment Components **1000-87

**1000-84

1000-85

1000-81

1000-82

1000-83

1000-88

1000-86

GPS Abutments (***Includes Transfer, Abutment Housing Kit & Comfort Cap) GPS Abutments

8035-91 8035-92 8035-93 8035-94 8035-95

8530-91 8530-92 8530-93 8530-94

8035-94-15 8035-94-30

8045-91 8045-92 8045-93 8045-94 8045-95

8045-94-15 8045-94-30

8057-91 8057-92 8057-93 8057-94 8057-95

GPS Attachments GPS Abutment Components

1000-92C

1000-92R

1000-92E ***1000-91

***4500-26 ***1000-94

22

1000-92G

1000-95

1000-92P

1000-92B

1000-92W

1000-93

1000-98S

1000-98SI

1000-96

Abutments are compatible with Zimmer, BioHorizons (internal) and MIS Implants with 3.5mm, 4.5mmD and 5.7mmD prosthetic platforms

Screw-Receiving, Ball & GPS Abutments Screw-Receiving Overdenture Abutments

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

1mmL 8035-61 8045-61 8057-61

Includes Transfer & Comfort Cap requires 1.25mmD Hex Tool

Collar Heights 2mmL 8530-62 8035-62 8045-62 8057-62

4mmL 8530-64 8035-64 8045-64 8057-64

Ball Abutments

4mmL 8035-74 8045-74 8057-74

GPS Abutments

1mmL 8530-91 8035-91 8045-91 8057-91

2mmL 8530-92 8035-92 8045-92 8057-92

Collar Heights 3mmL 8530-93 8035-93 8045-93 8057-93

4mmL 8530-94 8035-94 8045-94 8057-94

Screw-Receiving Angled Overdenture Abutments

Platform 3.5mmD 4.5mmD 3.5mmD 4.5mmD

Screw-Receiving Angled GPS Abutments

Platform 3.5mmD 4.5mmD 3.5mmD 4.5mmD

Replacement Tops for Angled Abutments

Code 1000-60 1000-70 1000-90

8057-61 8057-62 8057-64

8035-72 8035-74

8045-72 8045-74

8057-72 8057-74

Includes Transfer, Comfort Cap, Metal Housing, White Male Liner & Spacer - requires 1.25mmD Hex Tool

Platform

Code 8035-94-15 8045-94-15 8035-94-30 8045-94-30

8045-61 8045-62 8045-64

Collar Heights 2mmL 8035-72 8045-72 8057-72

3.5mmD 4.5mmD 5.7mmD

Code 8035-64-15 8045-64-15 8035-64-30 8045-64-30

8035-61 8035-62 8035-64

Includes Transfer & Comfort Cap requires 1.25mmD Hex Tool

Platform

3.0mmD 3.5mmD 4.5mmD 5.7mmD

8530-62 8530-64

5mmL 8035-95 8045-95 8057-95

8530-91 8530-92 8530-93 8530-94

8035-91 8035-92 8035-93 8035-94 8035-95

8045-91 8045-92 8045-93 8045-94 8045-95

8057-91 8057-92 8057-93 8057-94 8057-95

8035-64-15

8045-64-15

8035-64-30

8045-64-30

8035-94-15

8045-94-15

8035-94-30

8045-94-30

Includes Transfer & Comfort Cap - requires 1.25mmD & 2.5mmD Hex Tool

Description 15º Angled Abutment 15º Angled Abutment 30º Angled Abutment 30º Angled Abutment

Includes Transfer, Comfort Cap, Metal Housing, White Male Liner & Spacer - requires 1.25mmD Hex Tool

Description 15º Angled Abutment 15º Angled Abutment 30º Angled Abutment 30º Angled Abutment

Includes Transfer & Comfort Cap

Description Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool] Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool] Replacement GPS Top for Angled Base [Requires 1.25mmD Hex Tool]

1000-60

1000-70

1000-90

23

Ancillary Components for Overdenture & Screw-Retained Restorations Screw-Receiving Overdenture Abut. Comfort Cap, Transfers & Analog

Code 1000-61 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15

Prosthetic Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Plastic Abutment Transfer - 2ea Plastic Comfort Cap - 2ea Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea

Overdenture Screw-Retained Abutment Components

Code 1000-05 1000-64 1000-65 1000-66 1000-67 1000-69

Prosthetic Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Screws require 1.25mmD Hex Tool

1000-61

1000-62

1000-63

1000-68 4000-13

Includes Fixation Screw [1000-05] with 1.25mmD Hex

Description Coping Replacement Fixation Screw - 2ea Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping

1000-05

1000-64

1000-65

1000-66

1000-67 1000-69

Ball Abutment Components

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Ball Abutment Housing - 2ea Nylon Liner - 2ea Nylon Liner Transfer - 2ea Ball Abutment Transfer - 2ea Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - 2ea Ball Abutment Housing & Nylon Liner

1000-81

1000-82

1000-83

1000-84

1000-85

1000-87

1000-86

1000-88

GPS Abutment Transfer, Analogs and Alignment Tools

Code 1000-94 1000-95 1000-97 1000-10 1000-26 4500-26 1000-99

Description Impression Coping - 2ea Abutment Analog 4mmD - 2ea Abutment Parallel Post - 4ea Guide Screw for Legacy - 2ea Guide Screw for Legacy 3.0mmD Platform - 2ea Comfort Cap - 2ea Plastic Abutment Angle Measure Guide

1000-97

1000-10 1000-26

4500-26

1000-99

1000-94

1000-95

GPS Abutment Components

Code 1000-92W 1000-92P 1000-92B 1000-92C 1000-92G 1000-92E 1000-92R 1000-91 1000-93 1000-98SI 1000-98S

Retention Force 5.0lbs 3.0lbs 1.5lbs 4.5lbs 3.0lbs 2.0lbs 1.0lb Assorted Assorted

Description Internal Replacement Male White - 4ea Internal Replacement Male Pink - 4ea Internal Replacement Male Blue - 4ea External Replacement Male Clear - 4ea External Replacement Male Green - 4ea External Replacement Male Orange - 4ea External Replacement Male Red - 4ea GPS Abutment Housing Kit - 1ea Black Processing Male - 4ea Internal Processing Cap/Male Kit - 1ea External Processing Cap/Male Kit - 1ea

1000-92W

1000-93

1000-92C

1000-92G 1000-92P 1000-92E

1000-92B

1000-98SI

1000-92R

GPS Instrumentation

Code 1000-96

24

Description Core Tool - Male Removal & Seating Tool

1000-91

1000-96

1000-98S

Surgical & Prosthetic Instruments Tapered Hex Tools

Code THT1.25 THT1.25S

Description 1.25mmD Tapered Hex Tool Long 1.25mmD Tapered Hex Tool Short THT1.25

Straight Hex Tools

Code HT1.25L HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S

THT1.25S

Square connection for use with Ratchet or Torque Wrench

Description 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) 2.0mmD Hex Tool Long 2.0mmD Hex Tool Short 2.5mmD Hex Tool Long (with retentive O-ring) 2.5mmD Hex Tool Short (with retentive O-ring) 3.0mmD Hex Tool Long 3.0mmD Hex Tool Short

Hex Drills

HT1.25

HT2.0

HT2.5

HT3.0

HT1.25S

HT2.0S

HT2.5S

HT3.0S

HT1.25L

Latch head connection for use with Surgical Motor

Code HD1.25 HD2.0 HD2.5 HD3.0

Description 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill (with retentive O-ring) 3.0mmD Hex Drill

HD1.25

HD2.0

HD2.5

HD3.0

R

TW30

TW35

SSH2.5

FMD

PAR

LDRILL

DE

Ancillary Instruments

Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH

Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture Mount Drill Paralleling Tool 2.8/2.3 Locator Drill Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder

TWM

ABH

Surgical Trays

Code ST BST CST

Description Empty Surgical Kit for Legacy System Implants Basic Surgical Kit for Legacy System Implants Complete Surgical Kit for Legacy System Implants

ST

BST

CST

25

Surgical Drills 3.2mmD Implants

Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

SD2.3

Code SD3.4 SD3.4S CBD3.7

Code SD3.8 SD3.8S CBD4.2

SD3.4

SD3.4S

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

CBD3.2

Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants

5.2mmD Implants

Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants

5.7 and 7.0mmD Implants

26

SD2.8S

Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants

4.2mmD Implants

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7 CBD7.0

SD2.8

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants

3.7mmD Implants

Code SD4.8 SD4.8S CBD5.2

SD2.3S

Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants Cortical Bone Drill for 7.0mmD Implants

D5.1

D5.1S

SD5.4

SD5.4S

CBD5.7

CBD7.0

Drill Sequence 3.2mmD Straight / Tapered Implant 3.0/3.2

Soft Bone Final

3.7mmD Straight / Tapered Implant 3.5/3.7

Dense Bone Final

Optional Bone Contour

CBD3.2

SD2.3

SD2.8

2.3/2.0mmD

2.8/2.3mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD3.7

SD2.3

SD2.8

SD3.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD4.2

4.2mmD Straight / Tapered Implant Optional 3.5/4.2

SD2.3

SD2.8

SD3.4

SD3.8

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD4.7

4.7mmD Straight / Tapered Implant Optional 4.5/4.7

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD5.2

5.2mmD Straight / Tapered Implant Optional 4.5/5.2

Optional

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

SD4.8

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

4.8/4.4mmD

5.7mmD & 7.0mmD Straight / Tapered Implant Optional 5.7/7.0 5.7/5.7

Optional

Optional

Soft Bone Final

Dense Bone Final

Optional Bone Contour for 5.7mmD

Optional Bone Contour for 7.0mmD

CBD5.7

CBD7.0

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

SD4.8

D5.1

SD5.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

4.8/4.4mmD

5.1mmD

5.4/4.8mmD

27

28

HT1.25S

HD1.25

THT1.25S

FMD

SD2.8

HT1.25

SD2.3S

THT1.25

SD2.3

R

HD2.5

HT2.5S

HT2.5

CBD3.2

SSH2.5

HD2.0

HT2.0S

HT2.0

SD2.8S

HD3.0

HT3.0S

HT3.0

SD3.4 SD3.4S

SD3.8

SD3.8S CBD4.2

Lower level of surgical tray

CBD3.7 SD4.4

SD4.4S CBD4.7

SD4.8

SD4.8S

SD5.4S

D5.1

PAR (4)

LDRILL

SD5.4

CBD5.2

DE

CBD5.7

D5.1S

Complete Surgical Tray Contents

Surgical Tray

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long 2.5mmD Straight Hex Tool-Short 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Empty Tray

Inside

Complete Kit

Basic Kit

Conversion Kit

X X X X X X X X X X X X X X X X X X X X X X X

X X

X

X X X X X X X X X X X X X X

X

X X X X X X

X X X

X

X X X X

X

X

X X X X

X X X

X X X X X X X X

X X X X

29

Customer Service & Technical Support online, over the phone, or in your office

Designed For Success, Packaged For Value

Reality Check Zimmer Customers

Legacy™3 Implant All-in-1 Packaging includes implant, abutment, transfer, cover screw & healing collar

Legacy™ Implant System Advantages:

Legacy1

Industry-Compatible Internal Hex Prosthetic compatibility with Zimmer Dental Screw-Vent®, BioHorizons® & MIS implants

Cover Screw

Legacy2

Healing Collar

Legacy3

Standard “V” Threads Spiral Threads Buttress Threads Matches Screw-Vent® for Increased Stability for Increased Surface

Surgical Compatibility with Tapered Screw-Vent® No need to change surgical protocol or tools

Three Implant Designs & Packaging Options Allows for selection based on price, packaging or thread design Legacy1: Includes cover screw, healing collar & plastic carrier Legacy2: Includes cover screw, healing collar & temporary abutment/transfer Legacy3: Includes cover screw, healing collar & preparable abutment/transfer

Micro-Threads Reduce crestal stress for improved initial stability

Widest Range of Dimensional Options The entire Legacy system includes seven implant diameters (3.2, 3.7, 4.2, 4.7, 5.2, 5.7, 7.0mm) & six implant lengths (6, 8, 10, 11.5, 13, 16mm)

www.implantdirect.com | 888-649-6425 All trademarks are property of their respective companies.

*5-04-12-0041*

5K-04-12-0041i Printed in the U.S.A. Copyright © 2012 Implant Direct Sybron International. All Rights Reserved