click here
Vintaj D. I. Y. Basics Wrapped Loop You’ll need: Round Nose Pliers
Browse more projects using head pins.
1
2
Chain Nose Pliers Flush Cutters 2” Head Pin Bead Bead cap (bead shown) (bead cap shown)
String a bead and bead cap onto a 2” head pin. Use Round Nose Pliers to create a 90 degree bend. Pull the wire around to form a simple loop with the tail overlapping.
Grip the tail and wrap tightly down the neck of the wire to complete approximately 3 coils.
3
Use flush cutters to trim excess wire close to the bottom of the coil. Use Chain Nose Pliers to straighten your loop if necessary and to tuck in the end of the wire tightly below the bottom coil.
Create a beautiful piece!