Vipp V1 Kitchen Worktop Cutout Guide
V44
Change log 13-02-2025
V44
- S_33 changed back to Ø38 (according to con gurator)
V43
- I_34 and I_35 added (Gaggenau vario200 downdraft)
V42
- Change in support pro les for end seating (10x10 piece)
V41
- Minor changes to end seating
V40
- End seating addad (page 25)
V39
- I_03A added
V38
- I_03 name changed from “7476 FL”
V37
- Generic measurements for Island w/seating (distance between steel pro les now measured on short side: 285mm)
V36
- All ush induction cutouts have been revised (I01, I02, I03, I04, I05, I06, I07, I08, I10, I11, I12, I17, I30, I31, I32, I33)
- 187 wall, placement of 15x15 tubes has been corrected to match other 187 units.
- All sinks cutouts are now measured to the center (S_01-S_36)
- 1270x1270 unit added in “Island worktops”
- Plywood strips highlighted
V35
- I 32, I33, & I_23 added
Note the new recess (section D-D) on I32 and I33
- Wall 1870 and 4270 tube pro les changed postion
V34
- S14, S15, S23, S36 sink cutouts added
- S33 changed: Ø38 -> Ø35 and moved
- I18 cutout added
Vipp Sink + cut-outs
Model number: BXX 210/110-50 - With turbo drain, with overflow, not for garbage disposal
Item number: 127.0390.403
S_00 No tap hole
S_02
Vipp 901 tap + Ø20 (Franke FT-101S tap hole)
S_01 Vipp 901 tap
S_03 Vipp 901 tap + Franke FT-101S tap hole
S_04
Vipp 901 tap + Ø30
S_05 Single Ø35 hole
Vipp Sink + cut-outs
Model number: BXX 210/110-50 - With turbo drain, with overflow, not for garbage disposal
Item number: 127.0390.403
S_06
Vipp 901 tap + Ø35 (Quooker)
335/935/1535/2135
Vipp Sink + cut-outs
Model number: KC500410200, with 89 mm/3,5” drain hole
Item number: 127.0369.282 (991.0627.557)
S_10
No tap hole
S_11
Vipp 901 tap
S_12
Vipp 901 tap + Ø20 (Franke FT-101S tap hole)
S_13
Vipp 901 tap + Ø38 mm hole
S_14
Vipp 901 tap + extra Ø35 holes
S_15
Vipp 901 tap + Ø30
Vipp Sink + cut-outs
Model number: BXX 210/110-68 - With turbo drain, with overflow, not for garbage disposal
Item number: 127.0390.404 (991.0643.570)
For EU cabinets with drawers
S_20 No tap hole
635/1235/1835/2435/3035
S_21
Vipp 901 tap
635/1235/1835/2435/3035
S_22 Singe Ø35 tap hole (Quooker)
Vipp Sink + cut-outs
Model number: BXX 210/110-68 - With turbo drain, with overflow, not for garbage disposal
Item number: 127.0390.404 (991.0643.570)
For EU cabinets with drawers
S_23
Vipp 901 tap + Ø30
635/1235/1835/2435/3035
Vipp Sink + cut-outs
Model number: BXX 210/110-68 - with 89mm/3,5” drain hole - Without turbo drain, with overflow, for garbage disposal
Item number: 127.0369.284
For US cabinet with doors
S_30
No tap hole
635/1235/1835/2435/3035
S_31
Vipp 901 tap
635/1235/1835/2435/3035
S_32
Vipp 901 tap + Ø20 (Franke FT-101S tap hole )
635/1235/1835/2435/3035
Vipps Sink + cut-outs
Model number: BXX 210/110-68 - with 89mm/3,5” drain hole - Without turbo drain, with overflow, for garbage disposal
Item number: 127.0369.284
For US cabinet with doors
S_33
Vipp 901 tap + extra Ø38 mm hole
635/1235/1835/2435/3035
S_34
Vipp 901 tap + Ø35 (Quooker)
635/1235/1835/2435/3035
S_35
Singe Ø35 tap hole
635/1235/1835/2435/3035
Vipp Sink + cut-outs
Model number: BXX 210/110-68 - with 89mm/3,5” drain hole - Without turbo drain, with overflow, for garbage disposal
Item number: 127.0369.284
For US cabinet with doors
S_36
Vipp 901 tap + Ø30
635/1235/1835/2435/3035
PITT Gas unit cut-outs
Colo (TW + BK + FP)
PITT Gas unit cut-outs
G_04
Baru (TW + BK + FP)
G_05
Bromo (TW + BK + FP)
G_06
PITT Gas unit cut-outs
Induction cut-outs
Flush mount instalation
I_01
Miele KM6323 (TH & SG) Miele KM7404 FX (EU & LEB)
DETAIL I_01 SCALE 1 : 1
I_02
Miele KM6389 (SG)
DETAIL I_02 SCALE 1 : 1
I_03
Miele KMDA 7473 FL-U (downdraft induction) (EU, LEB, AUS, SGP & MY)
DETAIL I_03 SCALE 1 : 1
Induction cut-outs
Flush mount instalation
Miele KMDA 7272 FL-U Silence
DETAIL I_03 SCALE 1 : 1
Induction cut-outs
Flush mount instalation
I_04
Miele KM 6375 (USA)
DETAIL I_04 SCALE 1 : 1
I_05
Miele KM7678 FL (EU & LEB)
DETAIL I_05 SCALE 1 :
I_06
Miele KM6365 (USA)
Induction cut-outs
Flush mount instalation
I_07
Miele KM 7564 (AUS) Cannot be placed as end unit!
I_08
Miele KM 7594 (AUS)
I_10
Gaggenau CI 262 105 (TW)
Induction cut-outs
I_11
Gaggenau CI 292 100 (TW, SG & KO)
DETAIL I_11 SCALE 1 : 1
I_12
Gaggenau CX 491 610 (US)
Gaggenau CI 292 102 (TW)
DETAIL I_12 SCALE 1 : 1
I_17
Gaggenau CI 282 102 (TW)
DETAIL I_17 SCALE 1 : 1
Induction cut-outs
Flush mount instalation
I_30
Küppersbusch KI 6800.0 SR (Jakarta)
I_31
Küppersbusch KI 9810.0 SR (Jakarta)
I_32
Gaggenau CV 282101 (TW, CH & KO)
Induction cut-outs
Flush mount instalation
Bora PUXU/PUXA (EU)
DETAIL I_33 SCALE 1 : 1
Induction cut-outs
NOT flush mount instalation
I_09
Miele KM 6320 (USA)
I_13
Gaggenau Vario 200 - one unit (TW)
335/935/1535/2135
I_14
Gaggenau Vario 200 - two units + (TW)
335/935/1535/2135
Induction cut-outs
I_15
Gaggenau Vario 200 - 3 units (TW)
635/1235/1835/2435/3035/3635
I_16
Gaggenau CX482 610 (USA)
I_18
Miele 7633 FR
1235/1835/2435/3035
1235/1835/2435/3035
Gas/Induction cut-out
NOT flush mount instalation
I_20
Bosch GAS PPU816B1TT (TW) +
Siemens GAS ER626PB70 (KO) +
Siemens Induction EX675LEC1K (KO)
335/935/1535/2135
I_21
Siemens GAS ER726RB90E (KO)
635/1235/1835/2435/3035/3635
I_22
Bosch Induction PXY875KW1E (TW)
635/1235/1835/2435/3035/3635
Gas/Induction cut-out
NOT flush mount instalation
I_23
Miele KM 2052 G (PH)
I_34
Gaggenau Vario200 - 28cm unit + 15cm downdraft
I_35
Gaggenau Vario200 - 2 x 28cm units + 15cm downdraft
635/1235/1835/2435/3035/3635
335/935/1535/2135
635/1235/1835/2435/3035
Island work tops - overall dimensions
Extension seating for Island - overall dimensions
Seating extensions of 935 and 1235mm available on island modules.
Extension available on:
Island 1270 + 935 = 2205 + 1235 = 2505
Island 1870 + 935 = 2805 + 1235 = 3105
Island 2470 + 935 = 3405 + 1235 = 3705
Island 3070 + 935 = 4005 + 1235 = 4305
Island 3670 + 935 = 4605 + 1235 = 4905
Island 4270 + 935 = 5205 + 1235 = 5505
Island 4870 + 935 = 5805 + 1235 = 6105
15x15x1,5mm aisi 304 steel profile 10x10x1,5mm aisi 304 steel profile
4mm aisi 304 solid stainless steel
Profile is 10 tall x 15 wide
Island w/ seating work tops - overall dimensions
Wall module work tops - overall dimensions
15x15x1,5mm aisi 304 steel profile 4mm aisi 304 solid stainless steel 15 x 25 mm water proof plywood