Rubbing strakes and rubber extrusions Fender profiles made of stainless steel and PVC bases PVC and anodized aluminium rubbing strakes Profiles, gaskets and wireways Marina Fenders
PM
Fender profiles made of stainless steel and PVC bases Low profile D-section rubbing strake made of mirror polished AISI 316 stainless steel Fitted with flared holes.
AISI 316 Profiles | Rubbing strake
44 - Rubbing strakes and rubber extrusions
Code
44.480.11 44.480.12 44.480.13 44.480.14 44.480.06 44.480.15 44.480.05 44.480.04
A mm 15
B mm 5
18 21 25 25 30 38 40
5.3 5.5 7 10 9 15 8
/m
500 600 700 980 1463 1300 3330 1720
Rods m 3
Base OPTIONAL 44.480.16
Terminal OPTIONAL
Distance between hole centres mm 185
3 3 3 4 3 4 3
44.480.17 44.480.18 44.480.19 44.480.19 44.480.21 44.480.22
44.484.18 44.484.20 44.484.28
185 185 185 120 185 120 185
Minimum order of 12 meters
Semi-round profile made of mirror polished AISI 316 stainless steel Already perforated and flared.
AISI 316 Profiles
Code
44.479.10 44.479.15 44.479.20
Lenght mm
Height mm
10 14 20
3.5 4 4
Fender profiles made of stainless steel and PVC bases
Rod m
3 3 3
/m 0.25 0.41 0.78
Inter-holes cm
20 20 20
Minimum order of 12 meters.
Rubbing strake made of mirror polished stainless steel C-shaped profile, pre-drilled and faireds; sold in 3-meter bars.
AISI 316 Profiles | Rubbing strake
Code
44.480.20 44.480.30 44.480.38
A mm
B mm
S mm
Rod m
Base OPTIONAL
Terminal OPTIONAL
Inter-holes cm
20 28 35
4.6 7 9
1.5 1.5 1.5
3 3 3
44.480.33-35 44.480.36 44.480.37
44.484.20 44.484.28
20 20 20
Minimum order of 12 meters.
Heavy duty base for rubbing strakes Made of white PVC, fitted with cover strip. Profiles | Rubbing strakes
Code
44.480.33
A mm
B mm
To combine with profiles
Roll m
36
15
44.480.20
24
Fender terminals for C-shaped and almond-shaped profiles AISI 316
Flush and perfectly combining with the corresponding rubbing strakes. Mirror polished AISI 316 stainless steel.
Fender terminals | Rubbing strake
Fender profiles made of stainless steel and PVC bases
Code
44.484.18 44.484.20 44.484.28
612
www.versilia.it
For profiles
S.S.
44.480.12 44.480.20; 44.480.13 44.480.30; 44.480.14
PVC 44.480.17 44.480.35; 44.480.18 44.480.36; 44.480.19
44
Fender profiles made of stainless steel and PVC bases Base for stainless steel rubbing strakes Made of semi-rigid white PVC, available in 24 meter coils. Profiles | Rubbing strakes
Code
44.480.16 44.480.17 44.480.18 44.480.19 44.480.21 44.480.22 44.480.35 44.480.36 44.480.37
Height mm
S.S. profile cross section
35
15x5
40
18x5
45
21x5,5
50
25x7
55
30x9
70
40x8
45
20x5
46
28x7
50
35x9
44.480.19
Roll m
44.480.11 44.480.12 44.480.13 44.480.14 44.480.15 44.480.04 44.480.20 44.480.30 44.480.38
44.480.21
24 24 24 24 24 24 24 24 24
44.480.22
44.480.16
44.480.35
44.480.17
44.480.36
44 - Rubbing strakes and rubber extrusions
44.480.18
To combine with OPTIONAL profile
44.480.37
PVC and anodized aluminium rubbing strakes Bumper fenders with anodised aluminium base Fitted with flexible PVC fender inserts, available in various colours; to be used with plastic terminals in table below; base sold in 3 to 6 metre lengths.
Minimum order of 24 metres. Profiles | Bumper fenders | Rubbing strakes
Alloy profile only
H mm
A mm
PVC insert in 24-m reels Code
Matching terminals
Colour
Code
9+5
44.485.11 44.485.14** 44.485.12 44.485.15** 44.485.13 44.485.16**
black black white white grey grey
44.479.03 44.579.03 44.485.01 44.484.01
Colour
black plastic white plastic chromed brass SS
44.485.10*
38
44.485.26*
25
7+5
44.485.27
black
44.479.04
black plastic
44.485.65*
63
15+6
44.485.66
black
44.485.64
anodized light alloy
44.486.10*
56
14+5
44.486.11 44.486.12 44.486.13
black white grey
44.486.01 44.586.01 44.484.02
black plastic white plastic stainless
44.487.10
56
14
44.486.11 44.486.12 44.486.13
black white grey
44.486.01 44.586.01 44.484.02
black plastic white plastic stainless
44.494.10*
75
15+5
44.494.11 44.494.12
black white
44.494.01 44.594.01
black plastic white plastic
100
16+5
44.495.11
black
44.495.01
black plastic
44.495.10* *
Fitted with cover strip teeth
**
Profile overside
44.485.01 44.485.26
44 44. .4 48 85 5. .2 26 7 +
44.485.64
44. 486 -58 6.0 1
44.479.04
44.4
94.0
Sailing with you, since 1958
44 .4 85 .1 0
3 9.0 .57 44 +
44 .4 85 .1 1
1
613
44
PVC and anodized aluminium rubbing strakes
Rubbing strake made of rigid durable plastic, fitted with flexible PVC insert Unbreakable, flexible without puckering, low cost; white bar base 4 meters long, PVC profile, available in 20 meter rolls. Caution: base and fender extrusion are sold separately but have to be mounted together to make the complete profile.
Minimum order: 20 metres per model. Profiles | Rubbing strake
Version
44 - Rubbing strakes and rubber extrusions
A B C D
white
44.030.05 44.038.05 44.040.05 44.055.05
Only profile
grey
white
44.038.07 -
44.030.40 44.038.40 44.040.40 44.055.40
44.030.01
Only PVC insert
grey
black
K profile mm
44.030.50 44.040.50 44.055.50
44.030.60 44.040.60 44.055.60
30 38 40 55
44.040.01
Height H tot with PVC mm
Cover overhang mm
30 38 40 55
White terminal Joint cover model white
44.030.01 44.040.01 44.040.01 44.055.01
5 6 5 5
44.042.21 44.042.26 44.042.27 44.042.22
44.055.01 A
B
C
D
Fender for boat mounting with leap seal Made of PVC; to be mounted only on one end, available in 24 meter coils. Profiles
Color
white
44.478.00 44.478.01 44.478.02
black
44.482.00 44.482.01 44.482.02
A mm
B mm
18 30 37
26 38 45
black
Terminal OPTIONAL
44.482.03 44.488.01 44.482.04
white
44.588.01 -
Fender profile with "L" shape base support Flexible PVC profile fitted with semi-rigid PVC support; it may be bent in any position; ideal for boats with leap seals; available in 24 meter coils; minimum order of 24 meters per model. Profiles
44.343.50
Code
Colour
44.488.00 44.588.00 44.488.45
black white black
Projection mm
Height mm
Core mm
33
30
18x18
33
30
18x18
36
38
22x22
Terminals OPTIONAL
44.488.01 44.588.01 44.488.46
90째 angle terminals OPTIONAL
44.343.50 -
44.488.45
44.488.00/ 44.588.00
PVC rubbing strake suitable for boats with boxed joint Made of black PVC, fitted with semi-rigid PVC insert and white screw cover; snap-in insert mounting; built-in strip cover. Profiles | Rubbing strake
Code
44.483.02-44.483.0044.483.01-44.483.03
44.483.00 44.483.01
A mm
B mm
44 55
18 21
Terminal
44.483.02 44.483.03
Roll m
24 24
Fender terminal made of mirror polished AISI 316 stainless steel Profiles
Code
44.484.01 44.484.02
614
www.versilia.it
PVC and anodized aluminium rubbing strakes
For profiles
44.485.10; 44.042.xx 44.486.10; 44.487.10
mm 40 (L) x 22 (H) 56.5 (L) x 30 (H)
PVC and anodized aluminium rubbing strakes
44
PVC fender profile RADIAL PATENT
Invisible rigid base, designed to be screwed/riveted onto the hull, 2-m slugs; semirigid external profile with easy pressure installation (no weld required), available in 24-metre rolls. Caution: tray and insert are separated and ahve to be mounted to make the profile complete.
Profiles
Cable tray, only
Only PVC colour
white
grey
black
Minumum radius bending mm
white
44.032.02 44.042.02 44.052.02 44.065.02
44.032.03 44.042.03 44.052.03 44.065.03
44.032.04 44.042.04 44.052.04 44.065.04
50
80
44.030.01 44.588.01 44.055.01 44.055.01
44.080.05
44.080.02
44.080.03
44.080.04
100
-
44.081.05
44.081.02
44.081.03
44.081.04
160
-
60 70
Joint cover SS
SS
44.484.01 44.484.02 44.484.02 44.084.10 (right) / 44.084.11 (left) -
44.042.15 44.042.16 44.042.17 44.042.18 -
minimum order of 24 metres radial80 + 44.042.18 + 44.084.11/44.054.10
44.042.15/16/17/18
44.484.01/02
44.054.10 DX
44.084.11 SX
Profiles, gaskets and wireways Porthole sealing profiles Made of special salt-resistant black PVC, suitable for sealing portholes. Profiles
Code
mm 26x20
44.481.00
Roll m
24
44 - Rubbing strakes and rubber extrusions
44.032.05 44.042.05 44.052.05 44.065.05
Terminals
Profile designed for trimming reinforced fiberglass, wood or metal Made of PVC 55 shore. Profiles
white
44.492.01
black
44.492.00
B mm
C mm
Suitable for tickness
Roll m
A mm
17
10
3.5
3/4
24
Profile designed for trimming reinforced fiberglass and other materials white
44.491.01 44.491.05
black
44.491.00 44.491.04
Suitable for tickness
A mm
B mm
Roll m
1.5 - 4 4-6
14 16.5
10 10.5
50 50
1 .0 91 .4 44
Made of semi-flexible reinforced PVC. Profiles
Profiles suitable for beading fibreglass Made of flexible reinforced PVC, fitted with waterproof neoprene foam seal; ideal for lockers, engine cases, etc. Profiles
44.493.00 44.493.01
For thickness
Roll m
2-4
50
2-4
25
Colour
Black Black
Sailing with you, since 1958
44.493.00
Code
44.493.01
615
44
Profiles, gaskets and wireways Self-adhesive profiles Perfect solution for sealing. Ideal use door, engine box, locker, hatch. High quality 3M adhesive tape. Profiles
Code
Colour
44.490.01 44.490.11
Black White
Material
Roll m
EPDM
25
silicon
25
Self adhesive EPDM D-section soft rubber extrusion Perfect solution for sealing. Ideal use door, engine box, locker, hatch. High quality 3M adhesive tape. Rubber extrusion | Seal
Code
44 - Rubbing strakes and rubber extrusions
44.490.02
A base mm
B height mm
17.5
16.9
Colour black
Roll m
25
Windscreen PVC profile Salt resistant. Profiles
white
44.472.02
black
Roll m
44.472.01
24
Black one-way semirigid reinforced groove 44.489.00 Suitable for sliding glasses, available in 10-metre coils, for glass sizes 4/6 mm. Window rails
Profiles, gaskets and wireways
STAND-PRO watertight guide profiles for sliding glass panes AISI 316 stainless steel profile, anti-friction high density polyethylene bottom, neoprene intermediate bearing and vibration dampening felt, screw mounting with the profile; side anti-sliding and vibration-dampening synthetic brushes made of UV resistant material. Window rails
Code
44.751.19 44.751.20
Profiles, gaskets and wireways
For glass thickness mm
Rod lenght m
Track
Width mm
Heigth mm
5/6,5 5/6,5
2.44 2.44
single double
15 25
16 11.5
Anti-draught guide Designed to seal sides against draught between two glasses, made of AISI 316 stainless steel. Profiles
Code
Height mm
44.751.18
17
Profiles, gaskets and wireways
Width mm
Rod lenght m
14
2.44
Stainless steel hook 44.473.00 Designed for mounting windscreens, fitted with universal swivelling joint. Hooks for windscreens
1 0.0 .01 44
2 .0 10 .0 4 4
44.010.03
Profiles, gaskets and wireways
Wireway designed for mounting boat awnings, canopies and cushions using an insert Boat awnings, canopies and cushions are fastened by means of a relinga insert. Canopies
Code
44.010.01 44.010.02
Description Tray in white semirigid PVC for hoods and bimini tops Tray in white semirigid PVC for cushions
Package
44.010.03
6.5-mm Ă˜ soft PVC rod for insert. To be sewn into fabric.
60-m roll
4-m bars 4-m bars
Profile designed for beading boat protection cradles Made of flexible PVC. Profiles
Code
44.756.85
616
www.versilia.it
Width mm
Height mm
Roll m
73
16
24
Marina Fenders
44
Marina Fenders
Marina fenders or Bumper fenders for larger vessels 44.211.73 Made of flexible PVC, "L" shape mounting; 2.5 meter bars, to be coupled with PVS Polyguard edge protectors 33.517.01; price per bar, colour white. Profiles | Marina fenders | Docking fenders | Bumper fenders
Marina Fenders
Profiles | Polyform | Docking fenders
Code
33.517.01 33.517.02
Marina Fenders
Model
PG-1 angular PG-2 streight
Lenght mm
A
Section mm B C
185 (per side) 457
72 90
73 74
92 112
D 35 39
Fendering for marinas, quays and piles Made of flexible black PVC. Also suitable as bumper fendering for fishing vessels. Profiles | Marina fenders | docking fenders | pile Marina Fenders
Code
44.020.00
Cut-down size m
mm 70 base x 70 projection
2
Profiles designed to protect wharfs, quay and mooring poles Made of flexible gray PVC. Profiles
Code
44.021.00
Cross section mm
72x30h
Marina Fenders
44 - Rubbing strakes and rubber extrusions
POLYGUARD White PVC fendering for quays or marinas.
Rod m
2
Sailing with you, since 1958
617
Steering systems Steering wheels Engine control cables Steering cable connectors and remote control adapter kits Control levers Steering systems Coupling bars Outboard tiller extensions Hydraulic steering systems for outboard engines Hydraulic steering system accessories PM
Steering wheels 45.158.09
45.157.02
SPORT Steering wheels Made of soft black polyurethane foam, fitted with 3 light-alloy spokes and universal central hub (Ultraflex, Morse, Teleflex, Tx etc.). Steering wheels
Code
Steering wheels
Spokes color
45.157.02 45.158.09
Crown Ø mm
silver black
340 300
DELFINO Steering wheels
45 - Steering systems
Anodized light alloy spokes, soft TANEGUM UV resistant crown, universal central hub. Steering wheels
white
grey
45.158.12
Steering wheels
black
45.158.11
External Ø mm 310
45.158.10
45.158.12
45.158.10
45.158.11
MANTA Steering wheels Anodized light alloy spokes and soft polyurethane crown. Steeing wheels
Code
45.157.97 45.157.98 45.157.99
Crown
Steering wheels
Spokes
White Black Grey
Crown Ø mm 355
Silver Black Black
355 355
45.157.99
45.157.98
45.157.97
Steering wheels fitted with anatomically designed hand grip
Sturdy black plastic steering wheel
Code
45.150.00
618
45.158.06
45.158.05
Fitted with 3 spokes, crown Ø 320 mm. Steering wheels
Fitted with 3 spokes, central hub with universal cone, external Ø 355 mm.
Code
Steering wheels
Colour
45.158.05
Black
www.versilia.it
Colour
Black
Code
Steering wheels
45.158.06
Colour
White
45
Steering wheels TECHNIC series steering wheels
Central hub fitted with universal cone, anodized light alloy spokes, soft polyurethane crown. Spoke
Soft wheel
Black Silver Silver
Crown Ø mm 350 350 350
45.163.01
Root coated Carbon coated Black
45.163.02
45.163.01 45.163.02 45.163.03
45.163.03
Code
Steering wheels
TECHNIC series steering wheels Fitted with mirror polished stainless steel spokes, hub and soft polyurethane crown. Steering wheels
Steering wheels
Inserts
Black Black Black
Crown Ø mm 350 350 350
SKIPPER steering wheels
45 - Steering systems
45.163.24
Silver Carbon Root coated
45.163.25
45.163.24 45.163.25 45.163.26
Crown
45.163.26
Code
45.158.40
45.158.41
Made of soft polyurethane with silver colour spokes and chromed. Equipped with universal central hub. Steering wheels
Code
45.158.40 45.158.41
Crown
+
Steering wheels
Black Black + silver
Spokes
Silver Silver
Ø mm
350 350
Mirror polished SS steering wheels Central hub with universal cone, adjustable to allow centering the steering wheel. Diameter: 350mm. Steering wheels
Code
Crown
Colour
Code
Crown
Colour
45.171.35
Leather effect (polyurethane)
black
45.176.35
Polished stainless steel
45.172.35
Leather effect (polyurethane)
grey
45.175.35
Soft carbon effect polyurethane
black
45.173.35
Leather effect (polyurethane)
white
45.152.01*
Polyurethane
black
45.173.36 45.174.35
Leather effect (polyurethane)
cream
45.152.02* 45.152.05*
Polyurethane
grey
*
mahogany
Wood with polyurethane lacquer
Mahogany
stainless steel
mahogany
Without helm position gauge
45.172.35
45.176.35
45.173.35
45.152.01
45.173.36
45.174.35
45.152.02
45.152.05
Sailing with you, since 1958
45.175.35
45.171.35
619
45
Steering wheels PEGASO steering wheels Soft polyurethane crown, mirror-polished stainless steel spokes and central hub. Universal cable. Steering wheels
Code
45.158.30
Spokes
Ø mm
45.158.45
Crown
Black
SS
300
45.158.46
White
SS
300
BALTIC steering wheels
45.158.31
Made of soft polyurethane, glazed + chromed light alloy spokes. Fitted with universal central hub. Wheels
Code
Steering wheels
Crown
45.158.30 45.158.31
Spokes chrome + silver light alloy chrome + silver light alloy
Black White
Ø mm
320 320
45 - Steering systems
"EVO Marine" Steering wheels Made of polyurethane lacquered, all fitted with universal hub. Steering wheels
Silver
45.178.01 45.178.02
Crown
Spokes
Root effect
45.178.42
Silver Silver
Polyurethane grip
Ø mm
Black Grey
355 355
45.178.42
45.178.01
45.178.02
Steering wheels with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. 45.132.35
320
45.130.35 45.132.35 45.133.35 45.131.35 45.129.35
Steering wheels
Colour
400
45.133.40 45.131.40 45.129.40
Carbon coated Briar root laquer White soft polyurethane Grey soft polyurethane Black soft polyurethane
45.133.32-35-40
45.130.35
45.129.32-35-40
45.133.32 45.131.32 45.129.32
350
Ø mm
45.131.32-35-40
Steering wheels
Soft polyurethane steering wheels fitted with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. Steering wheels
black
Ø mm 350 280
45.128.01 45.127.01
www.versilia.it
Suitable for Tenders
45.128.01/45.127.01
45.128.04
620
grey
45.128.02 45.127.02
45.128.02/45.127.02
cream
45.128.04 -
45.128.03/45.127.03
white
45.128.03 45.127.03
Steering wheels
45
Polyurethane steering wheels Made of stainless steel, fitted with external soft polyurethane crown, universal cone: Ultraflex, Morse and Teleflex. Steering wheels
Steering wheels
Crown
white
45.149.33 -
Ø mm
black
45.139.33 45.139.40
340 400 /40 .33 39 1 . 45
3 .3 49 .1 5 4
Stainless steel steering wheels fitted with cubic crown Fitted with handle and universal central cone Ultraflex, Teleflex, Morse etc. Steering wheels
Crown coated root
Crown Ø mm
45.143.33 45.143.37
330 370
45 - Steering systems
Hand grip Fitting on steering wheel crowns to provide a quick rotation, universal size. Steering wheel accessories
Code
45.134.01 45.134.02
Steering wheels
Colour
Code
45.134.03 45.134.04
Black Grey
Colour
White Wood
1 4.0 .13 45
.02 134 45.
4 4.0 .13 45
.03 134 45.
45.134.01
Helm Indicator 45.130.01 For application at the centre of the wheel. Universal and self-adhesive. Once applied it can be adjusted for perfect centering.
Mahogany polyurethane steering wheel
Mahogany steering wheel
45.158.07 Fitted with mahogany polyurethane lacquered crown and black spokes. Steering wheels
Steering wheels
lacquered
45.160.00 Fitted with mirror polished stainless steel spokes and hub; universal central hub cone, steering wheel central adjustment; external Ø size 350 mm.
Steering wheels
White soft expanded polyurethane steering wheel
45.170.35 Fitted with central hub made of polyurethane lacquered Iroko and mirror polished stainless steel spokes, external Ø size 350 mm. Steering wheels
Steering wheels
Quick-release steering wheel made of soft polyurethane + stainless steel spokes
Grey
45.127.12
Black
45.127.11
Sailing with you, since 1958
Ø mm
Ideal for
280
Tender
45.127.12
White
45.127.13
45.127.11
Rudders
45.127.13
It can be slipped off the pin of the steering system in few seconds. When the tender is stowed in the onboard garage, the wheel often bumps prevents its roof. This device avoids such a problem.
621
45
Steering wheels
Steering wheels with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. Code
Ă˜ mm
45 - Steering systems
45.135.01 45.135.02 45.135.03 45.135.04 45.135.05 45.135.45 45.136.02 45.151.04 45.136.05 45.151.05 45.137.01 45.137.02 45.137.03 45.137.05 45.137.06 45.137.07
350 350 350 350 350 400 350 350 350 350 350 350 350 350 350 350
45.135.01 - MOD. A
45.135.05/45 - MOD. A
45.136.05 - MOD. B
45.137.06 - MOD. C
622
Steering wheels
Rim Soft polyurethane Soft polyurethane Soft polyurethane Carbon Real wood Real wood Soft polyurethane Soft polyurethane Real wood Real wood with inserts Soft polyurethane Soft polyurethane Soft polyurethane Lacquered Lacquered Soft polyurethane
45.135.02 - MOD. A
45.135.03 - MOD. A
Rim Colour
Model
Black Grey White Carbon Teak Teak Grey Cream Mahogany Mahogany and black Black Grey White Carbon Briar Root Ivory
A A A A A A B B B B C C C C C C
45.137.05 - MOD. C
45.136.01 - MOD. B
45.136.02 - MOD. B
45.136.03 - MOD. B
45.137.01 - MOD. C
45.137.02 - MOD. C
45.137.03 - MOD. C
45.135.04 - MOD. A
45.137.07 - MOD. C
www.versilia.it
Steering wheels
45
Magnifico wheel with oval spokes Stainless steel metal frame. Universal cone. Ø 350
45.177.01 45.177.02 45.177.03 45.177.04 45.177.05
Crown Polyurethane - black Polyurethane - grey Polyurethane - white Teak - matt finish Carbon fibre
Spokes
Ø 350
45.177.21 45.177.22 45.177.23 45.177.24 45.177.25
3 3 3 3 3
45.177.03
Spokes
45.177.04
45.177.05
45.177.24
45.177.25
Steering wheels with mahogany polyurethane lacquered crown
Steering wheel with external teak wheel rim, thick diameter
Made of mirror polished stainless steel, fine finish, 16° spoke inclination.
Stainless steel spokes, anatomically designed
Steering wheels
Code
45.168.35 45.168.40
Steering wheels
Ø mm
grasp crown for better gripping.
Steering wheels
350 400
External Ø mm
45.165.02 45.165.03
45.177.01
400 350
45.177.02
45.177.21
45.177.22
Steering wheels with external teak wheel rim and spokes coated with teak
Stainless steel hub and spokes, central cone “Ultraflex, Morse”. Steering wheels
Steering wheels
Code
45.177.21
4 4 4 4 4
45 - Steering systems
45.177.23
Crown Polyurethane black Polyurethane grey Polyurethane white briar root lacquered look Carbon look
Code
45.167.40 45.167.50
Steering wheels
external Ø mm
400 500
Mirror polished stainless steel steering wheels fitted with 5 spokes Oval boxed crown for a better grip and for a pleasant aesthetic look; universal central cone (Ultraflex, Morse, Teleflex, Tx, Mancini etc.); stainless steel central hub, fine finish, supplied with central black
plastic cap. Code
Steering wheels
Ø mm 320 380 420
Central teak plug OPTIONAL
45.176.00 45.176.00 45.176.00
45.176.00
45.165.32 45.165.37 45.165.41
7 .3 65 .1 5 4
Mirror polished stainless steel steering wheels Suitable for sail boats, no embrasure, fitted with central hub fully made of stainless steel, universal cone (Ultraflex, Tx, Teleflex, Mancini etc.). Steering wheels
Code
45.164.60 45.164.75
Crown Ø mm
600 700
Steering wheels
Code
45.164.90 45.164.10
Crown Ø mm
900 1000
Sailing with you, since 1958
623
45
Steering wheels Steering wheel with teak crown. Stainless steel spokes, crown with rear anatomic design for better gripping. Steering wheels
Code
45.168.01 45.168.02
External Ø mm
Spoke inclination
350 400
15° 15°
Steering wheels with teak external wheel rim Stainless steel.tapered spokes. Steering wheels
Code
45 - Steering systems
Steering wheels
Crown Ø mm
45.167.01 45.167.03 45.167.04 45.167.05
Code
Crown Ø mm
45.167.06 45.167.07 45.167.08
400 500 600 700
800 900 1000
Classic steering wheels Genovese type with 6 or 8 spokes, fitted with perimetrical brass bands, central hub in just one piece, polyurethane lacquered with 8 coats, sealed spokes, very sturdy, all with standard hole size 18 mm, or with Ultraflex. Steering wheels
Code
45.160.37 45.160.42 45.160.49 *
Ø mm
Code
Steering wheels
45.160.52 45.160.60 45.160.70
370 420 490
Ø mm
Code
45.160.80 45.160.10*
520 600 700
Ø mm
830 1000
Without brass rings
Classic steering wheel with stainless steel external rim Technical features are the same of steering wheel model 45.160.xx. The external rim is mounted with a special system without screws. The hub and band are made of chromed brass; the best steering wheel currently available in the market, fitted with cone Ultraflex or Vetus for MT30/50/75/100 upon request. Steering wheels
Code
45.161.42 45.161.52
Ø mm
Code
Steering wheels
45.161.62 45.161.72
420 520
Ø mm
Code
45.161.82
620 720
Ø mm
820
Central cap for steering wheels 45.176.01
45.176.02
Steering wheel accessories
Code
Material
Steering wheels
brass
For steering wheels 45.160.37; 45.160.42
45.176.02
brass
45.160.49; 45.160.52; 45.160.60;
45.176.03 45.176.04
stainless steel stainless steel
45.161.42 45.161.52; 45.141.62
45.176.01
Rear cable steering shaft Made of plastic and metal. Steering systems
45.145.01
624
45.145.02
Code
45.145.01
www.versilia.it
Angle normal 90°
Steering wheels
Code
45.145.02
Angle inclined 20°
ULTRAFLEX Steering wheels
45
ULTRAFLEX Steering wheels ULTRAFLEX "Corsica" steering wheels Soft PVC crown, light alloy spokes. Steering wheels
Code
45.383.30 45.383.34 45.383.93 45.386.47
Spokes Silver Silver Silver Black
45.601.51
Crown Black White Grey Root effect
Ø mm
350 350 350 350
Central hub
45.383.93
45.386.47
45.383.30
45.383.34
45.380.01 45.386.35
Model LINOSA
Ø mm
PONZA
350
45.601.51
350
ULTRAFLEX Steering wheels
Spokes
Silver Silver
Crown
Inserts
Black Silver
Silver -
Central hub
ULTRAFLEX steering wheels "Nisida/Spargi/Burano”
45.384.01
Soft polyurethane crown, light alloy spokes. Steering wheels
ULTRAFLEX Steering wheels
Code
45.384.01 45.384.03
45.380.01
Code
45.386.35
Polyurethane lacquered crown, light alloy spokes. Steering wheels
Model NISIDA
Ø mm
SPARGI
350
350
Spokes
Black Silver
Crown
Inserts
Black Black
-
45.384.03
45 - Steering systems
ULTRAFLEX "Ponza/Linosa”steering wheels
Silver
45.601.51 Central hub
Central ULTRAFLEX steering wheels 45.601.51 For ULTRAFLEX steering wheels, fitted with button and shield Ultraflex. Steering wheel accessories
ULTRAFLEX Steering wheels
Control levers
Box B47 45.047.00 Supplied with kit for all types of cables.Without kit it is suitable for Mercury-engines Remote control boxes
Control levers
Single lever control B89 Universal model, designed for side wall mounting either right of left, recommended for outboard and inboard engines fitted with hydraulic inverter. Compact size, can be fitted into any type of boat, equipped with idle lever locking system, sold with universal Kit, uses all types of cables except for C4 and C22. The kit K35 is required if cables C5 and C16 are used. Remote control boxes
Code
45.452.02BI
Color
Ivory
Control levers
Code
45.452.02NE
Colour
Black
Sailing with you, since 1958
625
Control levers
45
Microswitch X 12 45.012.00 It can be fitted in all Ultraflex boxes (except B47/B400/B401), because this does not enable the ignition unless the engine is neutral. Remote control boxes
Control levers
Diecast and chromed alloy single lever controls
Code
Type Single engine Twin engine
45.103.00 45.104.00
45.104.00
Remote control boxes
45.103.00
Designed for panel mounting. Pull the level outwards to disconnect the inverter during the engine warm up. Equipped with internal friction, they require cables C2/C8/ C0. Safety switch* OPTIONAL
45.043.00 45.043.00
45.104.00
It allows to start the engine on in neutral
*
45.103.00
with single action where each lever control the gas or inverter cable separately; use any type of cable except for C4; supplied ready to use with cables C14/MACH14 - C2/C7/C8/MACHZero. For cables C5/C16/MACH5 ask for kit K60 (45.100.11). For cables C36/MACH36 ask for kit K62 (45.100.12). For cables C22 ask for kit K61 (45.100.13). Control levers
Code
Double lever box 45.100.04* 45.100.06* 45.100.08* 45.100.02 Single lever box 45.100.01 *
Action
Description
single single single double
single engine gas + inverter (B322) twin engine gas only (B322T) twin engine inverter only (B322S) twin engine (B302CR)
double
single engine (B301CR)
45.100.04
Remote control boxes
45.100.02/06/08
45.100.01
Universal size for any type of engine, gas and inverter control function, compact size, made of chromed zamak. Available in double action version with push button inverter disconnection, or
45 - Steering systems
Single lever control boxes “Low Profile�
Special offer
MORSE single lever, series MT The most classical and most used single chromed lever; console mounting, It controls both inverter and idle, while the idle can be used without connecting the gearbox. Remote control boxes
Code
45.095.00
Version
MT 3 Single, single engine
Control levers
Code
45.096.00
Version MT 3 Twin, two engines
Control box suitable for controlling one engine 45.340.02 Made of chromed brass and AISI 316 stainless steel, size 140x120x350 mm; suitable
with cables: C2/C7/C8/C14. Remote control boxes
Control levers
Sailing with you, since 1958
627
45
Control levers
Low-profile bulkhead single-lever control Double action: gas + inverter: Modern and simple design without projections very suitable for sailing boats. Front panel with lever made of AISI 316 stainless steel. Equipped with adjustable clutch. Availability of X41 safety switch to avoid engine ignition when the lever is not in idle position. Matching cables: C2/C8/MACH"0". Remote control boxes
Code
45.452.20
45.452.20
Type B400
Version Mechanical (both gas and inverter)
Single lever control for recess wall mounting Any cable may be used (exceptC22/C36/MACH 36). With cables C5 and C16/MACH 5 kit 35 is required. Suitable for any type of engine. Remote control boxes
Control levers
45.452.04 45.452.05 45.452.06 45.452.08
Version
Abbreviation
with neutral lock with neutral lock and Trim switch sailboat version with neutral lock and Trim switch, black knob
B183 B184 B85 B310B
45.452.09
with neutral lock and Trim switch, brier knob
B310BR
45.452.09
45.452.08
45 - Steering systems
Code
Universal single lever box “Ultraflex B65/B77” Chrome or lacquared body, chromed lever. Uses cables C2/C7/C8/C14, with kit K35 you can also
use cables C5/C16. Remote control boxes
Code
45.252.00 45.252.01 45.252.02 45.252.03
Color
Control levers
Trim control
Model
x x
B73 B65 B77 B76
Painted Chromed Painted Chromed
Twin-lever box twin-engine “Ultraflex B66/B79” Chromed or lacquered body, chromed lever; universal model for outboard and inboard engines, use cables C2/C7/C8/C14 with kit K35 (45.252.35), or also cables Mercury. Remote control boxes
Code
45.253.00 45.253.01 45.253.02 45.253.03
626
www.versilia.it
Color Painted Chromed Painted Chromed
Control levers
Trim control
Model
x x
B74 B66 B79 B78
45
Control levers Twin lever box GEMINI Require cables C2/C7/C8/C0 and C22 with adaptor K22. Angled levers
Straight levers
Remote control boxes
45.350.01-B50 45.350.02-B59DX* 45.350.02-B59SX* *
Hand side right left
45.350.01-B46 45.350.02-B58DX* 45.350.02-B58SX*
Safety lock allows to connect gearbox only at min RPM and to throttle only if inverter is fully connected.
45.350.02
45.350.01
0.01 45.35
45.350.02
45 - Steering systems
Engine control cables Engine control cables
Lenght in feet 05’ 06’ 07’ 08’ 09’ 10’ 11’ 12’ 13’ 14’ 15’ 16’ 17’ 18’ 19’ 20’ 21’ 22’ 23’ 24’ 25’ 26’ 27’ 28’ 29’ 30’ 31’ 32’ 33’ 34’ 35’ 36’ 37’ 38’ 39’ 40’
628
Engine control cables
Tipo C2 C4 C5 C8 C14 C36
For engines for all Suzuki, Mariner, Yamaha, Tohatsu, Selva and Honda outboard and inboard engines F.B. Evinrude, Johnson before 1979 Mercury and Mercruiser inboard and outboard engines inboard engines and stern drives (heavy duty reinforced cable) Johnson, Evinrude engines with stiff terminal, OMC from 1979 to now for all Mercury/Mercruiser engines equipped with Generation II (year 200) radio remote control box
C2
45.002.05 45.002.06 45.002.07 45.002.08 45.002.09 45.002.10 45.002.11 45.002.12 45.002.13 45.002.14 45.002.15 45.002.16 45.002.17 45.002.18 45.002.19 45.002.20 45.002.21 45.002.22 45.002.23 45.002.24 -
C4
45.004.06 45.004.15 45.004.16 -
www.versilia.it
C5
45.005.06 45.005.07 45.005.08 45.005.09 45.005.10 45.005.11 45.005.12 45.005.13 45.005.14 45.005.15 45.005.16 45.005.17 45.005.18 45.005.19 45.005.20 45.005.21 45.005.22 45.005.24 45.005.25 45.005.26 45.005.28 45.005.30 -
C8
45.008.08 45.008.09 45.008.10 45.008.11 45.008.12 45.008.13 45.008.14 45.008.15 45.008.16 45.008.17 45.008.18 45.008.19 45.008.20 45.008.21 45.008.22 45.008.23 45.008.24 45.008.25 45.008.26 45.008.27 45.008.28 45.008.29 45.008.30 45.008.31 45.008.32 45.008.33 45.008.34 45.008.35 45.008.36 45.008.37 45.008.38 45.008.39 45.008.40
C14
45.014.05 45.014.06 45.014.07 45.014.08 45.014.09 45.014.10 45.014.11 45.014.12 45.014.13 45.014.14 45.014.15 45.014.16 45.014.17 45.014.18 45.014.19 45.014.20 45.014.22 45.014.24 -
C36
45.003.06 45.003.07 45.003.08 45.003.09 45.003.10 45.003.11 45.003.12 45.003.13 45.003.14 45.003.15 45.003.16 45.003.17 45.003.18 45.003.19 45.003.20 45.003.21 45.003.22 45.003.24 -
Engine control cables
45
Patented cables series ULTRAFLEX MACHTM High efficiency and flexibility. Engine control cables
Model MACHZero MACH14 MACH36 MACH5 Engine control cables
Lenght in feet
MACH14
MACH36
45.011.13 45.011.14 45.011.15 45.011.16 45.011.17 45.011.18 45.011.19 45.011.20 45.011.22 45.011.24 45.011.26 45.011.28 45.011.30 -
MACH5
45.010.13 45.010.14 45.010.15 45.010.16 45.010.17 45.010.18 45.010.19 45.010.20 45.010.22 45.010.24 45.010.26 45.010.28 45.010.30 -
45.009.13 45.009.14 45.009.15 45.009.16 45.009.17 45.009.18 45.009.19 45.009.20 45.009.22 45.009.24 45.009.26 45.009.28 45.009.30 -
MACHZero
45.000.12 45.000.13 45.000.14 45.000.15 45.000.16 45.000.17 45.000.18 45.000.19 45.000.20 45.000.22 45.000.24 45.000.26 45.000.28 45.000.30 45.000.32 45.000.34 45.000.36 45.000.38 45.000.40
45 - Steering systems
12’ 13’ 14’ 15’ 16’ 17’ 18’ 19’ 20’ 22’ 24’ 26’ 28’ 30’ 32’ 34’ 36’ 38’ 40’
Type universal (as C2/C8) OMC (as C14) Mercury GEN II (as C36) Mercury (as C5)
Steering cable connectors and remote control adapter kits 9B kit for cable connection
K7 kit for cable connection
K60 kit for cable connection
45.180.04 For Yamaha engines 5 HP
45.180.05 For 9,5A/ 1 2A/15A (r.o. 626-48501-00)
45.100.11 For adjusting cables C5, C16, MACH5 to boxes B301 and B302
Engine control cables
Steering cable connectors and remote control adapter kits
Engine control cables Engine control cables
K57 kit for cable connection
K 56 kit for cable connection
45.057.00 For cables C2/C8/C0 on engines Johnson/Evinrude Engine control cables
Steering cable connectors and remote control adapter kits
45.056.00 For adapting cables C2/C8/C0 on Mercury engines Engine control cables
"A.310" kit for cable connection
45.255.09 For mounting cables C2 on engines Yamaha/Mariner Engine control cables
Steering cable connectors and remote control adapter kits
Steering cable connectors and remote control adapter kits
Steering cable connectors and remote control adapter kits
Steering cable connectors and remote control adapter kits
K61 kit for cable connection
45.100.13 For adapting cable C22 to boxes B301
and B302 Engine control cables
Steering cable connectors and remote control adapter kits
K35 kit for cable connection
45.252.35 To use cable C5/C16 on single-lever box 45.252/253 Engine control cables
Sailing with you, since 1958
Steering cable connectors and remote control adapter kits
629
45
Steering cable connectors and remote control adapter kits
K51 kit for cable connection
K62 kit for cable connection
45.051.00 For connecting cables C14 to engines, to be used with single-lever on
45.100.12 For adapting cables C36 and MACH36 to boxes B301 and B302
bulkheads.
Engine control cables
K67
K23, K24, K25 kit for cable connection
Code
Engine control cables
45.047.23 45.047.25 45.047.24
Kit “K23” “K25” “K24”
Steering cable connectors and remote control adapter kits
To be used on B47 with C14 OMC 1979 and later B47 with wire C2/C7/C8/C0 B47 with C4 OMC, Selva, Volvo engines Steering cable connectors and remote control adapter kits
Engine control cables
Steering cable connectors and remote control
Code
45.100.16
To adapt cables C2/C7/C8/MACHZERO to boxes B322/B324
Fork for fixing radio remote control sheaths.
45 - Steering systems
Made of stainless steel, designed for Johnson, Evinrude, Penta, Selva engines. Engine control cables
Steering cable connectors and remote control
Code
Description RIGHT painted in black (506001) LEFT (50621Q)
45.255.01 45.255.02
ULTRAFLEX steering systems - Rotary steering systems Rotary steering System T 67 Suitable for outboard engines up to 55 HP, can also be used with Morse C230/231, Teleflex, Compact, TX805.
Box only with clutch and cover 90° black
Steering systems
M58 cable only
ULTRAFLEX steering systems - Rotary steering
45.067.00
45.067.XX *
45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 * Pls check the detailed table here below to choose the right product depending on the length needed.
Cable M58 For control box (model 45.067.00) Steering systems
Code
45.067.07 45.067.08 45.067.09 45.067.10 45.067.11
Length 7’ 8’ 9’ 10’ 11’
ULTRAFLEX steering systems - Rotary steering systems
Code
Length 12’ 13’ 14’ 15’ 16’
45.067.12 45.067.13 45.067.14 45.067.15 45.067.16
Code
Length 17’ 18’ 20’ 22’
45.067.17 45.067.18 45.067.20 45.067.22
Rotary steering system T 71 For outboard engines, stern drive engines up to 9/10 meters and speed up to 50 MPH, 4 steering cycle, curve radius minimum cable 200 mm, stroke 228 mm. Steering systems
Control mech only
45.055.02
ULTRAFLEX steering systems - Rotary steering systems
90°
45.055.00
45.185.XX*
45.055.02
Cover 20° 45.055.03
45.595.13/14/ Engine side terminals and brackets for any kind of steering wheel 16/17/18/19 from this catalogue. *
Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.
45.055.03
630
M66 cable only
www.versilia.it
ULTRAFLEX steering systems - Rotary steering systems
45
Rotary steering system T 85 For outboard, inboard and SX-drive engines up to 9/10 meters and maximum speed of 50 MPH, steering cycle 3, minimum curve radius 200 mm, stroke 228 mm. Steering systems
ULTRAFLEX steering systems - Rotary steering systems
Control mech and cover 90°
45.185.00
M66 cable 45.185.XX *
45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *
Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.
Rotary steering system T 72 Designed for heavy power, hulls up to 10.50 meters and speed of over 50 MPH. Same features as model T71, but it works with two cables M66. "T 72" control box only
M66 cable only
Steering systems
45.072.00
ULTRAFLEX steering systems - Rotary steering systems
90° 45.055.02
45.185.xx *
Cover
20° 45.055.03
*
45 - Steering systems
45.595.13/14/15/ Optional terminals and brackets to be choosen 45.595.13; 45.595.14; 45.595.15; 45.595.16; 45.595.17; 45.595.18; 45.595.19. It could be used with any kind of ste16/17/18/19 ering wheel from this catalogue. Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.
Non reversible rotary steering system T 73 Designed for hulls up to 9/10 meters and speed up to 50 MPH. This system allows you to leave the steering wheel without having the propeller cause vibration to the hull. Steering systems
"T 73" control box only
M66 cable only
ULTRAFLEX steering systems - Rotary steering systems
Cover
90°
45.073.00
45.185.xx *
20° 45.055.03
45.055.02
45.595.13/14/15/ Optional terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *
Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.
Rotary steering system with adjustable wheel orientation Steering systems
ULTRAFLEX steering systems - Rotary steering
Box
Model
Version
M66 cable only
90° shaft adaptable
T 81
single for boats up to 9/10 metrers
45.185.xx *
45.038.00
45.082.00**
T 82
double cable for boats up to 10,50 and max speed above 50 MPH
45.185.xx *
45.038.00
45.083.00
T 83
single no feedbackfor boats up to 9/ 45.185.xx * 10 meters
45.038.00
45.084.00**
T 84
45.081.00
double cable not reversable for boats up to 10,50 meters and max sped above 50 MPH
45.185.xx *
45.038.00
45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *
Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.
**
Special offer
45 .0 38 .0 0
Cable M66 Can also be used as replacement for cables Teleflex SAFE-T Code
Steering systems
45.185.07 45.185.08 45.185.09 45.185.10 45.185.11 45.185.12 45.185.13
Length 7’ 8’ 9’ 10’ 11’ 12’ 13’
Code
45.185.14 45.185.15 45.185.16 45.185.17 45.185.18 45.185.19 45.185.20
Length 14’ 15’ 16’ 17’ 18’ 19’ 20’
ULTRAFLEX steering systems - Rotary steering systems
Code
45.185.21 45.185.22 45.185.23 45.185.24 45.185.25
Length 21’ 22’ 23’ 24’ 25’
Sailing with you, since 1958
631
45
Steering system accessories
Steering systems Straight line steering system T86 Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. The system consists of a steering box already fitted with cable (TM86) and has to be equipped with G86 shaft (45.059.00) and OPTIONAL 90° (45.055.02) or 20° (45.055.03) hub cap. Steering systems
T 86 control mech + different length cables
Cable length
45.059.12 45.059.13 45.059.14 45.059.15 45.059.16
Cable length
45.059.17 45.059.18 45.059.19 45.059.20 45.059.21
12’ 13’ 14’ 15’ 16’
45.059.00 45.055.02 45.055.03
45.055.02
45.055.03
45 - Steering systems
T 86 control mech + different length cables
17’ 18’ 19’ 20’ 21’
T 86 control mech + Cable length different length cables
45.059.22 45.059.23 45.059.24 45.059.25
22’ 23’ 24’ 25’
G86 shaft unit 90° cover 20° cover For the complete steering system, order the following items: 45.059.xx+45.059.00+45.055.02/03
45.059.00 Shaft unit G86 Steering systems
Steering system accessories Return rod
Stainless steel eyelet terminal
45.146.01 For steering gear with single cable, adjustable, univeral model fits all steering gear and outboard engines, supplied with terminals 45.044.00 and 45.148.00 Outboard engine controls
45.148.00 Used to convert cables with terminals threaded with eyelet terminal, suitable for steering gear Ultraflex and Mancini. Thread 10 MA, hole 9,1 mm Outboard engine controls
Steering system accessories
Steering system accessories
Terminal A73
Coupling A44
45.595.16 For cables on engines Mercury, Mariner, Yamaha, Suzuki, Tohatsu, Force and Honda
45.044.00 For cables with terminal thread Outboard engine controls
Outboard engine controls
Adaptor K46
45.046.00 For converting cables with threaded terminal (M47), cables with bayonet terminal (M6645.185.10)
Adaptor
Adaptor K66
45.054.00 To use cables M47 with terminals Morse
806TX Outboard engine controls
Steering system accessories
Plate
Selector (L23)
45.545.03 For fitting steering gear onto engines
45.549.00 For double steering station, use to connect cables with single lever boxes as well as with traditional boxes
Yamaha/Mariner
632
www.versilia.it
45.053.00 For convert cables M66 into cables M47 with a threaded terminal Outboard engine controls
Steering system accessories
Bracket S39
45.595.13 Stainless steel stern bracket Outboard engine controls
Steering system accessories
Steering system accessories Terminal A74SS
Terminal A75
45.595.18 For engine fitting on cables without passing on the dinghy
45.595.17 For single cables on OMC Outboard engine controls
Steering system accessories
Stainless steel bracket
Stainless steel bracket
45.595.14 S40 stainless steel bracket.
45.595.15 S55 stainless steel bracket
Steering system accessories
Outboard engine controls
Steering system accessories
Stainless steel bracket
45.595.19 S61 stainless steel bracket Outboard engine controls
Terminals for cables C2/C7/C8/C0 Outboard engine controls
Type
L25 L7 L12 L26
Suitable for cables C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO C22
45.026 .00
Code
45.488.01 45.488.05
Type
Steering system accessories
L3 with bracket L14 with fork
Suitable for cables C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO
45.488.05
Cable sheath holder Outboard engine controls
45.488.04
45.488.02 45.488.03 45.488.04 45.026.00
45.488.02 Steering system accessories
45.488.01
45 - Steering systems
Code
Steering system accessories
45.488.03
Outboard engine controls
45
Device for mounting single cable steering gears 45.147.00 Device designed for mounting single cable steering gears on motorized dinghies with
outboard engines that are not made-ready to house single cables onto the boat’s steering; this device avoids having to mount the steering gear cable onto the dinghy’s transom; universal model, made of anodized light alloy, fitted with a plate model 47.763.92 + adjusting clamp + steering gear mounting pipe + small screw-in nylon bushings. Outboard engine controls
Steering system accessories
Mounting clamp for steering gear pipe 45.147.01 Just mounting clamp for steering gear pipe, designed for mounting onto the transom, apart from plate 47.763.92. Supplied with stainless steel mounting lag bolt. Outboard engine controls
Steering system accessories
Coupling bars Coupling rod 45.560.00 Stainless steel with ball terminal joints, used to connect the main engine with an
auxiliary one; the auxiliary steering can be handled with the boat steering system. Adjustable length from 45 to 60cm, easy to remove thanks to its spring ball fitting.
Engine coupling rod
Coupling bars
Sailing with you, since 1958
633
45
Outboard tiller extensions
Outboard tiller extensions Extension tiller for outboard engines Version fitted with patented snap-in locking system; universal model, anodized light alloy pipe, rubber hand grip and nylon lock.
45.156.05
Outboard engine controls
Outboard tiller extensions
Code
Version standard with ground push button included in the handle telescopic
45.156.05 45.158.01 45.159.00
Length cm
60 60 55/95
45.158.01
45.159.00
Extension tiller for outboard engine steering Wing nut mounting. Universal model made of anodized light alloy, equipped with handgrip and nylon locking system.
45.155.80/81
Extension
45.155.80 45.155.81 45.155.86
45.155.86
Version
Length cm
Fixed Fixed Telescopic
66 76 61 / 100
Vetus hydraulic steering systems for inboard engines VETUS steering systems Made fully of rust-proof material according to advanced techniques, EC type-approved. Twin control
Simple control
45 - Steering systems
Code
The measurement of the steering systems is just an indication. The choise shall keep into account the hull size, the engine power, the rudder size, the hull weight and type. Please, let us know all the above mentioned data to allow us recommend you the most suitable steering system. Hydraulic steering systems
Code
45.030.10 45.045.10 45.045.20* 45.080.10 45.080.20* 45.110.10 45.110.20* 45.140.10 45.140.20* *
Type
Station
MT 30 MT 52 MT 52 MT 72 MT 72 MT 125 MT 125 MT 175 MT 175
single single double single double single double single double
Boat length
8 10 10 12 12 14/15 14/15 16/17 16/17
Torque kgm
30 52 52 72 72 125 125 175 175
Rudder turns
3.4 3.5 3.5 4.9 4.9 6 6 8.5 8.5
Vetus hydraulic steering systems for inboard engines
Stroke mm
Tiller angle Tiller length degrees mm
150 160 160 225 225 160 160 225 225
70 70 70 70 70 70 70 70 70
129 140 140 196 196 140 140 196 196
Pump
Cylinder
HTP20 HTP3010 HTP3010 HTP3010 HTP3010 HTP4210 HTP4210 HTP4210 HTP4210
MTC30 MTC52 MTC52 MTC72 MTC72 MTC125 MTC125 MTC175 MTC175
Cylinder volume c.c.
67 104 104 146 146 253 253 356 356
Joints 45.028.18-19
4 14 4 14 4 14 4 14
"T"
Fitted with check valve
Important: A) The Vetus steering gears, except for model 45.030.10, can be installed with flexible pipe R7 5/16 (45.028.14) or with copper pipe 10x8 mm. The copper pipe doesn’t require additional joints, the flexible pipe requires joint models 45.028.18-19 according to the quantity shown beside the steering systems
B) Steering gear 45.030.10 uses nylon or copper pipe size 6x8
.10 030 45.
45.045.10
45.080.10
45.030.10
45.110.10
634
0.10 0/14 10.1 45.1
0.10 0/08 45.1 45.0
www.versilia.it
45.140.10
2 2 2 2
Hydraulic steering systems for outboard engines
45
Hydraulic steering systems for outboard engines
CE approved, suitable for all engine. Assembled with one pump and 1 or 2 actuators. Need to buy separate the hydraulic fittings (45.025.18/19) and hose R7 (45.028.14)
Vetus hydraulic steering systems for outboard engines Hydraulic steering systems
Code
45.035.40 45.085.10
Hydraulic steering systems for outboard engines
Station
Single engine
Twin engine
single single single
x x -
x
Max HP
Pump
150 HTP2010R 225 HTP3010R 450 HTP4210R
Front cylinder balanced
With pipe 45.028.14 No of joints No of T 45.028.18-19 joints needed needed
OBC150 OBC225 OBC225(2)
4 4 12
45 - Steering systems
45.085.20 Components and spare parts for Vetus hydraulic steerings, outboard engines 45.035.42 Pump only - type HTP2010R 45.085.11 Pump only - type HTP3010R 45.085.13 Pump only - type HTP4210R 45.035.43 Pump only - type OBC150 45.085.12 Pump only - type OBC225
2
Components and spare parts for hydraulic steering system Vetus Pump for VETUS steering system Hydraulic steering systems
Code
45.030.11
Type HTP20
Code
Components and spare parts for hydraulic steering system Vetus
Type HTP3010
45.045.11
Code
Type HTP4210
Code
Type MTC175
45.110.11
Cylinder for VETUS steering system Hydraulic steering systems
Code
45.030.12 45.045.12
Type MTC30 MTC52
Code
Components and spare parts for hydraulic steering system Vetus
45.080.12 45.110.12
Type MTC72 MTC125
45.140.12
Stainless steel flange (HTPF2) for VETUS steering systems 45.126.40 To remove and fit pumps HTP size 74 mm Hydraulic steering systems
Components and spare parts for hydraulic steering system Vetus
Tap BYPASS
Check valve
Hydraulic steering systems
Code
Components and spare parts for hydraulic
45.126.20
Type for single or double station MT30/52/72/125/175
45.126.30
for Hi Load steering system with pipes mm 18x15
45.045.05 For hydraulic steering gears 45.045.10; 45.045.20; 45.080.10; 45.080.20; 45.110.10; 45.110.20; 45.140.10; 45.140.20 Hydraulic steering systems
Components and spare parts for hydraulic steering system Vetus
Hose kit It is used in the last section of the connection to the cylinder during installation of steering systems with copper pipe. Hydraulic steering systems
Code
Description
45.045.06
straight connections
45.045.07
straight + angled connections
Content RF 1.5-m hose 45.028.14; 4 x connections 45.028.18; 2 x 10/10 connections 1046000004.
RF 1.5-m hose 45.028.14; 2 x connections 45.028.18; 2 x connections 45.028.19; 2 x 10/10 connections 1046000004.
Sailing with you, since 1958
635
45
Components and spare parts for hydraulic steering system Vetus Recoverable copper joints Used to connect nylon pipe size 5/16 (45.028.14 or similar) standard for steering gears. Code
Type straight
Hydraulic steering system accessories
45.028.18
Code
Type 90°
Components and spare parts for hydraulic steering system Vetus
45.028.19
Rudder coupling rods Two stud mounting and two dowels, two fixing holes size 129 and 180 mm in order to be used on various types of steering gear. Outboard engine controls
Code
Components and spare parts for hydraulic steering system Vetus
For rudder shaft Ø mm
45.029.01
Code
For rudder shaft Ø mm
45.029.02
30
40
ULTRAFLEX Hydraulic Steering for outboard motors up to 150 HP Front pump UP20 F and UP20 T For boats with maximum power 150HP or inboard boats up to 9 mts. Max speed 25 kts. Hydraulic steering system accessories
Version
Mounting
Cylinders
45.270.01 45.270.02*
UP20 F UP20 T
frontal frontal/adjustable
5 5
*
45.027.00 45.290.35-40-45-50-55-60-65-70 45.038.00
Recessed flange OPTIONAL 45.270.03
Relief valve bar
Capacity c.c.
Ø max st.wheel (mm)
50 50
20 20
508 406
Steering systems to be completed with: oil, 2 litres flexible hose kit kit X52 for adjustable slope of the steering wheel 45.270.03 + 45.270.01
45.270.01
45.270.01
45.270.03
45 - Steering systems
Code
45.270.02 + 45.038.00
45.270.02 + 45.038.00
Hydraulic cylinders CYLINDER APPLICATIONS 45.271.01/02
Hydraulic steering systems
45.271.01/02
MODEL
MERCURY and MARINER
F50 EFI - F60 EFI 4T F75 - F90 4T 115 EFI 4T 75-90-115 Optimax 2T 135-150 Optimax 2T 75-90 2T
45.271.01/02
ENGINE
ENVIRUDE YAMAHA HONDA
45.271.02
SUZUKI TOHATSU-NISSAN SELVA TOHATSU Code
45.271.01
45.271.01 45.271.02 45.271.04 45.271.06 45.271.06
All All BF75-BF90 4T BF115-BF130 4T BF135-BF150 4T BF90-BF150 V-TEC 4T All All All All
Type
Application
Mounting
Balanced
UC94-OBF/1 UC94-OBF/3 UC68-OBS UC69-I
outboard outboard outboard inboard
front front side side
yes yes no no
ULTRAFLEX Hydraulic Steering for outboard motors up to 150 HP
CYLINDER UC94-OBF/1 UC94-OBF/1 UC94-OBF/3 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/3 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 Volume c.c. 94 94 68 68
Thrust kg 278 278 168 168
Steering systems to be completed with:
45.027.00 45.290.35/40/45/50/55/60/65/70
oil, 2 litres flexible hose kit
45.271.06
45.271.04 45.271.04
636
YEAR 1990 - 2008 1990 - 2007 2004 - up to now 1999 - up to now 2004 - up to now 2000 - up to now 2007 - up to now 1995 - up to now 1998 - up to now 2005 - up to now 2008 - up to now -
www.versilia.it
Joints
3/8" 3/8" 3/8" 3/8"
45
ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP
ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP The system works under very high pressure (1500 PSI) by means of special pumps, cylinders, hoses, and custom designed check valves. Eliminates delays in steering response.
Hydraulic pump Equipped with check valve Hydraulic steering
Code
45.275.01 45.275.02 45.275.03
ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP
Type
Mounting
Capacity cc/rev.
Pistons
Pressure bar
Ă˜ max. steering wheel mm
UP28 FSVS UP33 FSVS UP39 FSVS
front front front
28 33 39
5 7 7
105 (1500 psi) 105 (1500 psi) 105 (1500 psi)
710 710 710
Hydraulic piston With adjustable joints and ULTRABOLT high-resistance connecting bolt. Hydraulic steering gears
ENGINE
MODEL
YEAR
CYLINDER
MERCURY and MARINER
All
-
UC128/1-SVS
All
-
UC128/2-SVS
YAMAHA
115C - 130B 2T 150F - 200F - 250G 2T 150 HPDI VMAX 2T F115 - F150 EFI 4T F200 - F225 - F250 4T F115 - F150 F200 - F225 - F250 - F300 - F350 4T
1998 - 2008 1996 - 2007 2000 - 2008 2000 - 2008 1999 - 2007 2002 - 2007 2004 - up to now 2006 - up to now
UC128/2-SVS UC128/2-SVS UC128/2-SVS UC128/2-SVS UC128/1-SVS UC128/2-SVS UC128/1-SVS UC128/2-SVS
HONDA
BF115 - 130 4T BF135 - 150 4T BF150 V-TEC 4T BF175 - BF200 - BF225 4T
1998 - up to now 2005 - up to now 2008 - up to now 2001 - up to now
UC128/3-SVS UC128/1-SVS UC128/1-SVS UC128/1-SVS
SUZUKI
DF100 - 115 - 140 4T DF150 - 175 4T DF200 - DF225 - DF250 - DF300
1998 - up to now 2006 - up to now
UC128/1-SVS UC128/1-SVS UC128/2-SVS
TOHATSU
115 - 120 - 140 2T 70 - 90 - 115 TLDI 4T
2004 - up to now 2004 - up to now
UC128/2-SVS UC128/1-SVS
SELVA
80 PORTOFINO / TIGERSHARK 2T 150 WHITE SHARK 2T 100 EFI MARLIN - 115 EFI NARWHAL 150 EFI KILLER WHALE 4T
1995 - 2008 2001 - 2007 2000 - up to now
UC128/2-SVS UC128/1-SVS UC128/2-SVS
JOHNSON
BJ90 - 115 - 140 4T J90 - 115 V4 2T J150 - 175 V6 2T J200 - 225 V6 4T
2001 - 2007 1995 - 2007 1995 - 2007 2004 - 2007
UC128/1-SVS UC128/2-SVS UC128/2-SVS UC128/2-SVS
ULTRAFLEX Silversteer hydraulic steering for
Code
45.276.01*
Type
Mounting
Volume cc
Thrust kg
Stroke mm
Joints
UC 128/2 - SVS
Front right
120
450
185
3/8
45.276.02* UC 128P/2 - SVS 45.276.03 *
UC128/1 - SVS
Front left
120
450
185
3/8
-
120
450
185
3/8
45 - Steering systems
ENVIRUDE
45.276.02
45.276.01
Schema d'impianto per bimotore doppio cilindro
They can be used with the following high-power engines: Yamaha 4 S 200/225/300/350 - Johnson/Evinrude 200/225/250 2S - Suzuki 200/225/250/900 4S - Honda 200/225 (ask for diffeent connection bracket 128/1).
Applicazione timonerie SILVER STEER Technical specifications and order indications ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP
FOR SYSTEM
Single cylinder singleengine
Single cylinder twinengine
Applications
up to 350 hp max
Non contra rotating engines up to 350 hp max Contra rotating engines up to 600 hp max
Double cylinder twinengine
Non contra rotating engines up to 600 hp max Contra rotating engines up to 700 hp max
Steering wheel rotations
4,3 (UP28) 3,6 (UP33)
4,3 (UP28) 3,6 (UP33)
6,1 (UP33)
Components
Code
Model
Q.ty
Cylinder Pump pipe kit Oil
45.276.01/02 45.275.01/02 45.277.xx 45.027.00
UC128-SVS UP28 o UP33-SVS Kit OB-SVS 45.027.00
1 1 1 1
Cylinder Pump pipe kit Oil Connecting rod
45.276.01/02 45.275.01/02 45.277.xx 45.027.00
UC128-SVS UP28 o UP33-SVS Kit OB-SVS 45.027.00 A94
1 1 1 1 1
UC128-SVS UC128P-SVS UP33-SVS KIT OB-SVS 45.027.00 A90 KIT OB-2C-SVS
2 1 1 2 2 1
Cylinder Cylinder port Pump pipe kit Oil Connecting rod Connection kit
Sailing with you, since 1958
45.276.01/02 45.275.03 45.277.xx 45.027.00 45.156.11
637
45
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors ULTRAFLEX "Gotech" universal hydraulic steering kit for outboard motors up to 115 HP
45.273.00
Corresponds to the norms 95/25 CE and ISO 10592 Supplied in kit containing: - Helm Pump UP18 semi recessed with non-return valve, and relief valve. Displacement/Revolution 18CC; Relief valve setting 55 bar. Maximum wheel Ø 508mm - Cylinder UC81-OBF universal balance. Volume 81cc, Output force 222 kg, Stroke 186mm, Connector 3/8" - 2 x 6 m flexible pipes 1/4" (can be shortened if necessary). Complete with terminal connectors - 2 litres hydraulic oil
45.273.00
Code
45.2 73.0 0
Description GOTECH Kit
45.273.00 45.290.20 45.290.22 45.290.23
45.273.00
Nut with 3/8" sleeve (61 CA) Rotating connector (AF90) for all ULTRAFLEX pumps Tee Connector 3/8" (TF38)
Made using the latest technology with 100% rust proof materials that meet with the Directive 94/25 EC and ISO 10592 standards. Interchangeable with equivalent to Hydraflex and Teleflex Seaster; comes with elbow connectors1/4 NPT for pipe size 3/8”. Hydraulic pumps Fitted with check valve. Circuit schematic for
Hydraulic steering system accessories
ULTRAFLEX Sydraulic Steering for medium and
Code
45.280.00 45.280.01 45.280.02 45.280.03 45.280.33 45.280.04 45.280.07 45.280.08
45.280.00/01/02/03
45 - Steering systems
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
45.270.08 45.270.07
Initials
Mounting
UP25F UP28F UP33F UP39F UP45F UP33R UP28R UP39R
front front front front front rear-dashboard rear-dashboard rear-dashboard
Flow per turn Pistons cc
25 28 33 39 45 33 28 39
Pressure bar
Max st.wheel Ø mm
70 70 70 70 70 70 70 70
710 710 710 710 710 710 710 710
5 5 5 7 7 7 5 7
5 5 5 5 5 5 5 5
X68 chromed flange for hydraulic pumps "F" kit for easier filling up and cleaning of hydraulic pumps
45.280.04
45.270.07
45.280 .04/07 /08
45.270.08
45.270.07 kit
Flanges for hydraulic steering gears Ultraflex Code
Type square flange (x64) round flange (x57)
Hydraulic steering system accessories
45.270.03* 45.280.10 *
45.280.10
45.270.03
45.270.03
45.270.03
Kit X52
Made ready for mounting kit X52, wheel inclination.
Code
45.281.01 45.281.02 45.281.03 45.281.04
638
Initials UP28T UP33T UP39T UP45T
ULTRAFLEX Sydraulic Steering for medium and
Mounting semi-recessed semi-recessed
similar look to Hydraflex
Hydraulic pumps
Hydraulic steering system accessories
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Flow per turn cc 28 33 39 45
Pistons 5 5 7 7
Pressure bar 70 70 70 70
www.versilia.it
Max st.wheel Ø mm 710 710 710 710
5 5 5 5
45.038.00 Designed to adjust and incline the steering wheel for a total of 48° Hydraulic steering system accessories
ULTRA
45
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors Outboard engine hydraulic cylinders Hydraulic steering system accessories
ULTRAFLEX Sydraulic Steering for medium and
Mounting
Balanced
Volume cc
Thrust kg
Stroke mm
Pipe joints
Type
45.282.00
front right
yes
120
450
185
3/8"
UC-128-OBF/1
45.282.01
front right
yes
120
450
185
3/8"
UC-128-OBF/2
45.282.11
front left
yes
120
450
185
3/8"
UC-128P OBF/1
45.282.12
front left
yes
120
450
185
3/8"
UC-128P OBF/2
45.282.03
side
no
132/163
455/563
203
3/8"
UC 132 OBS
Code
45.282.00-01 45.282.11/12
45.282 .03
45.282.12
45.282.00 (UC 128/1 - SVS) 45.282.03 45.282.11
45.282.01 (UC 128/2 - SVS)
Hydraulic steering system accessories
Code
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Type
45.282.21 45.282.22 45.282.23 45.281.24 45.281.25
For UC-128-OBF/1 UC-128-OBF/2 UC-128-OBF/3 UC-128P-OBF/1 UC-128P-OBF/2
LA 1 LA 2 LA 3 LA1P LA2P
45.282.21
45.282.22
45.282.23
45.281.24
45.281.25
Coupling rods For outboard engines, made of stainless steel. Code
Steering systems
Type
Engine to engine mm
45.156.08
hydraulic/mechanical
A92, easily adjustable, for small spaces
550/700
45.156.09
hydraulic/mechanical
A92, easily adjustable, for small spaces
700/950
45.156.10
hydraulic/mechanical hydraulic
A88 A90, to be used with double front
650/950
45.156.11
Outboard engine controls
ULTRAFLEX Sydraulic Steering for medium and
*
45.156.08/09/10
45.156.11
hydraulic cylinders (45.282.00-01)*
45 - Steering systems
Return rod Kit This allows to adapt cylinders 45.282.00-01-11-12 to different engines. I.E. if engine has been replaced and cylinder not.
45.156.11
The cylinders must always be LH and RH
Kit OB-2S
Code
Hydraulic steering system accessories
45.290.15
Kit 95-25
3/8" hose by the metre
Hydraulic steering system accessories
Description For additional station or for automatic pilot installation. It includes fittings and 8 metres of 3/8" nylon hose for compensation line.
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Code
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Description
45.290.16
second station joints
45.291.00 Sold per metre. Hydraulic steering system accessories
Kit 2 flexible pipes Blended for ouboard steering gears Ultraflex. High pressure pipes
Code
45.290.35 45.290.40 45.290.45
Length m
3.5 4 4.5
Code
45.290.50 45.290.55 45.290.60
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Length m
5 5.5 6
Code
45.290.65 45.290.70 45.290.80
Length m
6.5 7 8
Pair of SILVER STEER high-pressure hoses Hydraulic steering, nylon hoses
Code
45.277.55 45.277.60 45.277.65
ULTRAFLEX Sydraulic Steering for medium and
Type OB-SVS 55 OB-SVS 60 OB-SVS 65
Length m
5.5 6 6.5
Code
45.277.70 45.277.80
Type OB-SVS 70 OB-SVS 80
Length m
7 8
Sailing with you, since 1958
639
45
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors Kit including 2 high-resistance reinforced hoses, already jointed for double cylinder and double engine connection Connected with rotating nuts and stiffening sleeves. To combine with bulkhead cross 45.028.28; 45.028.30. Code
Length cm 70 90 120
Radio remote control cables
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
45.290.11 45.290.12 45.290.13
Bulkhead troughout twin bush, waterproof
8 8.2 .02 45
6 8.2 .02 45
Code
Base colour
Hydraulic steering system accessories
45.028.24 45.028.26 45.028.28 45.028.30
0 8.3 .02 45
For pipes pass through pass through twin connection twin connection
45.028.24/26
45.028.28/30
45.028.24
45 - Steering systems
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
White Chromed White Chromed
Hydraulic cylinders for inboard engine steerings Trimmed version Hydraulic steering system accessories
Code
45.284.01 45.284.02 45.284.03 45.284.05
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Volume cc
Torque kgm
Power kg
Run mm
Nylon pipe joints
Balanced
116 168 215 293
58 87 111 146.5
464 673 673 1155
178 178 228 228
3/8" 3/8" 3/8" 3/8" nylon
yes yes yes yes
A
B
178 178 228 178
C
155 155 199 163
127 127 163 134
Dimension mm D E
464 506 582 506
102 106 131 107
F
G
40 40 40 40
73 105 105 125
45.284.01/02/0 3
45.284.0 5
Hydraulic steering cylinders for inboard engines Trimmed version Hydraulic steering system accessories
Code
45.286.04
45.286.01 45.286.04* *
Volume cc 132
Torque kgm 66
132
66
ULTRAFLEX Sydraulic Steering for medium and high power inboard motors
Power kg 464
Run mm 203
Nylon pipe joints 3/8"
464
203
3/8"
For Volvo stern drives power assisted steering series DP-E / DP-G
45.286.01
45.286.04
45.286.01
Hydraulic steering system accessories High pressure nylon pipe size 5/16� R7
Nylon hose
45.028.14 Suitable for hydraulic steering gear Vetus except for model 45.030.10. 24 meter coils.
Codice
Ă˜ mm 6x8
Hydraulic steering system accessories
45.027.99
Roll m 25
Bulkhead troughout bush Hydraulic steering system accessories
Code
45.028.22 45.028.23
640
www.versilia.it
Material Black Nylon
Black Nylon with stainless flange
For hydraulic hose
45.028.14 45.028.14
Hydraulic steering system accessories Oil for hydraulic steering units
Oil can “Lubrimar”
65.089.00 Suitable for topping up; supplied in a 250 cc. pack.
45.027.00 Special for hydraulic steering gears, 2 litre container.
45
Copper pipe Copper pipes
6x8
45.028.11
Ø mm 8x10
Roll m 10x12
45.028.10
45.028.12
50
Technical specifications and how to order steering wheels HOW TO ORDER ITEM 45.282.01 ENGINE
MODEL
RACING 300 115-125-150 EFI 2T 225-250 EFI 2T 75-90-115-125 OPTIMAX MERCURY e 135-150-175 OPTIMAX MARINER 200-225-250 OPTIMAX 100-115 EFI 4S 250 SALTWATER EFI 4S 135-150-175-200 VERADO L4 BF75-90 4S BF115-130 4S HONDA BF135-150 4S BF90-BF150 V-TEC 4S BF175-200-225 4S DF70-80-90 4S DF100-115-140 4S SUZUKI DF150-175 4S
JOHNSON
YEAR
CYLINDER
1990 - 2007 2000 - 2007 2004 - up to now 1999 - up to now 1999 - up to now 2007 - up to now 2007 - up to now 1995 - up to now 1998 - up to now 2005 - up to now 2008 - up to now 2001 - up to now 1998 - up to now 2008 - up to now
UC128OBF1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/3 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/3 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/2 UC128-OBF/1
2006 - up to now
UC128-OBF/1
2001 - 2007 1995 - 2007 1995 - 2007 2004 - 2007
UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2
DF200-DF225-DF250-DF300 BJ90-115-140 4S J90-115 V4 2S J150-175 V6 2S J200-225 V6 4S
SYSTEM
ENGINE
YAMAHA
EVINRUDE
SELVA
TOHATSU
MODEL
YEAR
CYLINDER
75C-90 2S 115C-130B 2S 150F-200F-250G 2S 150HPDI VMAX 2S 175-200-225-250-300HPDI VMAX 2S F90-F100-F115-F150 EFI 4S F200-F225-F250 4S F115-F150 F200-F225-F250-F300 4S E75-E90 2S E115-E130-E135E 2S V4 E150-E175-E200 2S V6 E200 HO-E225-E250 2S V6 E250HO-E300 2S V6 80 PORTOFINO/TIGERSHARK 2S 150 WHITE SHARK 2S 100 EFI MARLIN - 115 EFI NARWHAL 150 EFI KILLER WHALE 4S 115-120-140 2S 70-90-115 TLDI 4S
1998 - 2008 1990 - 2008 1996 - 2007 2000 - 2008 2000 - 2008 1999 - 2007 2002 -2007 2004 - up to now 2006 - up to now 2004 - up to now 1995 - up to now 1995 - up to now 1995 - up to now 1995 - up to now
UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/1
2001 - 2007
UC128-OBF/2
2000 - up to now 2004 - up to now 2004 - up to now
UC128-OBF/1 UC128-OBF/2 UC128-OBF/1
Components
Single engine - single cylinder St.wheel turn: 4.5 Up to 300 hp max
Twin engine - single cylinder St.wheel turn: 3.8 Up to: 300 hp max (non counter-reversing props); 500 hp max (counter-reversing props)
Twin engine - double cylinder St.wheel turn: 6.5 Up to: 500 hp max (non counter-reversing props); Up to 600 hp (counter-reversing props)
Cylinder Pump Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit Oil Connection bar For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit T-joint kit Oil Conncetion bar For additional stations, add Pump Joint kit Pipe kit Oil
Codes
45.282.. 45.280.00/01 45.290.35.. 45.027.00 45.280.00/01 45.290.15 45.290.35.. 45.027.00 45.282.. 45.280.00/02 45.290.35.. 45.027.00 at 94 45.280.00/02 45.290.15 45.290.35.. 45.027.00 45.282..right/left 45.280.03 45.290.35.. standard 45.027.00 at 90 45.280.03 45.290.15 45.290.35.. 45.027.00
45 - Steering systems
APPLICATIONS 45.282.00/.01/11/12
Hydraulic steering systems
Quantity
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 1 1 1
Cylinder 45.282.00/01 is not recommended if maximum speed of the boat exceeds 60 knots
Sailing with you, since 1958
641
45
Hydraulic steering system accessories
HOW TO ORDER ITEM 45.284.01/02/03/05 Hydraulic steering system accessories
APPLICATION 45.284.01/02/03/05 CYLINDER
BOAT LENGTH MAX
45.284.01 45.284.01 45.284.02 45.284.02 45.284.02 45.284.02 45.284.03 45.284.03 45.284.03 45.284.03 45.284.05 45.284.05 45.284.05 45.284.05
8.50 m 9.50 m 11.60 m 13.40 m 9.70 m 11.60 m 13.40 m 15.20 m 11.60 m 13.40 m 18.90 m 19.80 m 18.90 m 19.80 m
HULL TYPE Gliding/Displacing Gliding/Displacing Gliding Gliding Displacing Displacing Gliding Gliding Displacing Displacing Gliding Gliding Displacing Displacing
ENGINE NUMBER
MAX TORQUE
HOW TO ORDER
1 2 1 2 1 2 1 2 2 2 1 2 2 2
up to 58 kgm up to58 kgm up to 87 kgm up to 87 kgm up to 87 kgm up to 87 kgm up to 111 kgm up to 111 kgm up to 111 kgm up to 111 kgm up to 146.5 kgm up to 146.5 kgm up to 146.5 kgm up to 146.5 kgm
Procedure 1 Procedure 1 Procedure 2 or 3 Procedure 3 Procedure 2 or 3 Procedure 3 Procedure 4 or 5 Procedure 5 Procedure 4 or 5 Procedure 5 Procedure 8 Procedure 8 Procedure 8 Procedure 8
NOTICE: The layout shown here is only indicative and in any case assumes a careful verification by the person carrying out the installation; for more information please contact our customer service office.
45 - Steering systems
SYSTEM
1 Max torque 58 kgm Steering wheel turn 4.1
2 Max torque 87 kgm Steering wheel turn 6
3 Max torque 87 kgm Steering wheel turn 5.1
4 Max torque 111 kgm Steering wheel turn 6.5
5 Max torque 111 kgm Steering wheel turn 5.5
8 Max torque 146.4 kgm Steering wheel turn 7.5
Components Pump
Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder 3/8" nylon tube Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil
Code 45.280.00/01 45.284.01 45.290.35.. 45.027.00
Quantity 1
45.280.00/01 45.290.16 45.027.00 45.290.35.. 45.280.01 45.284.02 45.290.35.. 45.027.00
1 1 1
45.280.01 45.290.16 45.027.00 45.290.35.. 45.280.02 45.284.02 45.290.35.. 45.027.00
1 1 1
45.280.02 45.290.16 45.027.00 45.290.35.. 45.280.02 45.284.03 45.290.35.. 45.027.00
1 1 1
45.280.02 45.290.16 45.027.00 45.290.35.. 45.280.03 45.284.03 45.291.00 45.027.00
1 1 1
1 1 2
1 1 2 1
1 1 2 1
1 1 on request 2 1 1 1
45.280.03 45.290.16 45.027.00
1 1 1
2) On systems 1,2,3, 4 and 5, as an alternative to the nylon pipe, a copper pipe can be used (size 3/8” or 10 mm) For such applications it is necessary to use a kit 95 or kit 100; copper piping is recommended for commercial vessel applications
www.versilia.it
2
45.280.03 45.290.16 45.027.00 45.290.35.. 45.280.03 45.284.05 45.290.35.. 45.027.00
1) On systems 3,4 and 5, as an alternative to pipe size 3/8”, the nylon pipe size 5/16” can also be used
642
1
1 1 3
Hydraulic steering system accessories
45
HOW TO ORDER ITEM 45.282.03 APPLICATION 45.282.03. Same features of model 45.282.01 with the additional information concerning engines Johnson & Evinrude: the cylinder 45.282.03 is not required
when an assisted steering engine OMC is already fitted with cylinder model 985519, in this case use n° 2 connecting joints (ref. Parker model F6X-5 10-3/8”) Hydraulic steering system accessories
SYSTEM
Components Cylinder Pump Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Pipe kit
Single cylinder single engine Steering wheel revolutions: 4.7/5.8 Application up to 300 hp max
45.282.03 45.280.00/01 45.290.35.. 45.027.00 45.280.00/01 45.290.15 45.290.35..
Oil
Single cylinder twin engine
Steering wheel revolutions: 4/5 Application up to: 300 hp max (non contra rotating engines); 450 hp max (contra rotating engines)
Quantity 1 1 1 1
1 1 1
45.027.00
1
45.282.03 45.280.00/01 45.290.35.. 45.027.00 supplied by the engine manufacturer 45.280.00/01 45.290.15 45.290.35.. 45.027.00 45.282.03 45.280.03 45.290.35.. 45.027.00 supplied by the engine manufacturer 45.280.03 45.290.15 45.290.35.. 45.027.00
1 1 1 1
1 1 1 1 2 1 2 2
1 1 1 1
Cylinder 45.282.02 is not recommended if maximum speed of the boat exceeds 60 knots
HOW TO ORDER ITEM 45.286.01/04 APPLICATIONS 45.286.01/04
Hydraulic steering systems
ENGINE
YEAR
LEG MODEL
MERCRUISER MERCRUISER MERCRUISER MERCRUISER VOLVO VOLVO VOLVO VOLVO VOLVO VOLVO
Current Current Current Current Up to now Up to now Up to now Current Current Current
Alpha Bravo one Bravo Two Bravo Three 275 280 290 DP-E DP-G DPS
CYLINDER Ultraflex non servo-assisted motor servo-assisted motor 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) UC168-1 N/D 45.286.01 (1,3,4) 45.280.03 45.286.01 (1,3,4) 45.282.03 45.286.01 (1,3,5) 45.286.06 N/A 45.286.06 N/A 45.282.03
45 - Steering systems
Twin cylinder twin engine
steering wheel revolutions: 6,5 Application up to 500 hp max (non contra rotating engines); up to 600 hp (contra rotating engines)
Cylinder Pump Pipe kit Oil Connection bar Steering Wheel For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit Oil Connection bar Steering Wheel For additional stations, add Pump Joint kit Pipe kit Oil
Code
1) Trimmed cylinder (the total number of steering cycles is equal from either straight of right, or vice-versa) 2) Non-trimmed cylinder (the total number of steering cycles is different between straight and left, or vice-versa) 3) Minimum side space for installing cylinder: 540 mm (21.2”) as an alternative model UC132-OBS can be installed) 4) Hydraulic cylinder Ultraflex can be installed only by replacing the mechanical steering gear with cable 5) Installation requires adaptor Volvo P.N. 872388 NOTA: for installation on SX-drive engines not listed on the table, please contact our Customer Service number. NOTICE: indications are general and refer only to standard products, for special installations please contact qualified fitters. SYSTEM
1 Max torque 66 kgm Steering wheel turn: balanced 4,7 - non balanced 5,8
2 Max torque 66 kgm Steering wheel turn: balanced 4 - non balanced 4/5
Components Pump Cylinder Pipe kit Oil For additional stations, to be added Pump Connection kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, to be added Pump Connection kit Oil Pipe kit
Code
45.280.01 see application 45.290.35.. 45.027.00 45.280.01 45.290.16 45.027.00 45.290.35.. 45.280.02 see application 45.290.35.. 45.027.00 45.280.02 45.290.16 45.027.00 45.290.35..
Quantity 1 1
2 1 1 1 1 1 2 1 1 1
As an alternative to nylon pipe size 3/8” the copper pipe size 3/8” or size 10 mm can be used to connect the system. Kit95 or kit100 are required for such applications.
Sailing with you, since 1958
643